Amino-zinc-ene-enolate cyclisation: a short access to (2S,3R)- and (2S,3S)-3-benzylprolines (3-benzylpyrrolidine-2-carboxylic acids)

The synthesis of 3-benzylprolines can be easily achieved in a diastereoselective and enantioselective way via amino-zinc-ene-enolate cyclisation. Transmetalation of the cyclic zinc intermediate with Pd₂(dba)₃/P(o-Tolyl)₃ allowed functionalisation with an aromatic ring. One-pot hydrogenolysis and Boc-protection led to the cis-isomer readily usable for peptide synthesis. The trans-isomer was obtained by epimerisation of the α-centre in a sealed tube at 200 °C.     

Synthesis of (2S,3R)- and (2S,3S)-[3-H1]-proline via highly stereoselective hydrolysis of a silyl enol ether

A straightforward synthesis of (2S)-[3,3-²H₂]-proline 1c and (2S,3R)- and (2S,3S)-[3-²H₁]-proline, 1b and 1a, respectively, has been devised. The key step of the route to the latter compounds involves highly stereoselective hydrolysis of the silyl enol ethers 3 and 3a, respectively, with protonation (deuteriation) from the re-face of the silyl enol ether.     

(R,R,R)-Tris(2-hydroxy-1-methylethyl)- and (S,S,S)-tris(2-hydroxy-2-methylethyl)phosphine: water-soluble chiral trialkylphosphines with C3-symmetry

The first α- and β-chiral water-soluble trialkylmonophosphines, 1 and 2, respectively, both with C₃ symmetry, were synthesised from sodium phosphide and chiral mesylates, accessible from (S)-ethyl lactate. X-ray structures of a corresponding 2:1 gold(I) complex [1₂Au(I)]OTf and of a borane complex 2·BH₃ were determined.     

Analogues of the Quararibea metabolite chiral enolic-γ-lactone from (2S,3S)- and (2S,3R)-tetrahydro-3-hydroxy-5-oxo-2,3-furandicarboxylic acids

Reaction of dialkyl (2S,3S)- or (2S,3R)-tetrahydro-3-hydroxy-5-oxo-2,3-furandicarboxylates with POCl₃ in pyridine followed by diazomethane resulted in the isolation of dialkyl 2S-4-methoxy-5-oxo-2,5-dihydro-2,3-furandicarboxylates, which are analogues of the Quararibea metabolite chiral enolic-γ-lactone (3-hydroxy-4,5-(R)-dimethyl-2(5H)-furanone). An unusual α-hydroxylation of γ-butyrolactone takes place involving POCl₃ in pyridine. When the dehydration was facilitated with methanesulfonyl chloride in triethylamine, instead of POCl₃, aromatic dialkyl 5-[(methylsulfonyl)oxy]-2,3-furandicarboxylates were obtained.     

Λ-doublet populations in CH(A2Δ) produced in the 193 nm multiphoton dissociation of (CH3)2CO, (CD3)2CO, (CH3)2S and CH3NO2

Unequal intensities of the Λ-doublet components were observed in the CH(A²Δ-X²Π) emission following the multiphoton dissociation of (CH₃)₂CO, (CH₃)₂S and CH₃NO₂ by an ArF laser (193 nm). The power dependence of the emission intensity was estimated to be cubic (3.1±0.2) when the laser power was below ≈ 8×10¹⁷ photons cm^?2 pulse^?1. The Λ-doublet populations depended on the rotational quantum number N′ and the preferred level changed at N′ = 20. A similar behavior was observed for the CD(A²Δ) from (CD₃)₂CO. Rotational distributions show bimodal behavior, having a hump around N′ = 13 in CH(A²Δ) and N′ = 11 in CD(A²Δ). These trends indicate that the CH(A²Δ) is produced through multiple processes where stepwise mechanisms are operative via either CH₂ or CH₃, or both radicals as intermediates.     

Assymetric synthesis of (2S,3R)- and (2S,3S)-[2-C;3-H] glutamic acid

We have developed a synthetic route for (2S,3R)- and (2S,3S)-[2-¹³C;3-²H] glutamic acids with high enantioselectivity. The key reactions in this synthesis are the asymmetric reduction of the 2,3-didehydroornithine derivative using the (S,S)-Et-DuPHOS-Rh catalyst and the oxidation of the δ-position by ruthenium catalysis.     

Multiparameter equations of state for siloxanes: [(CH3)3-Si-O1/2]2-[O-Si-(CH3)2]i=1,…,3, and [O-Si-(CH3)2]6

This article presents the continuation of the work on the development of technical equations of state for linear and cyclic siloxanes already documented in this journal. The fluids considered herewith are octamethyltrisiloxane (MDM, C₈H₂₄Si₃O₂), decamethyltetrasiloxane (MD₂M, C₁₀H₃₀Si₄O₃), dodecamethylpentasiloxane (MD₃M, C₁₂H₃₆Si₅O₄), dodecamethylcyclohexasiloxane (D₆, C₁₂H₃₆Si₆O₆). The 12-parameter functional form proposed by Span and Wagner has been selected because of its positive characteristics. Siloxanes are produced in bulk quantities and are mostly utilized in the cosmetics industry and, mixed, as high-temperature heat transfer fluids. Furthermore, they are used as working fluids in high-temperature organic Rankine cycle power plants. The available property measurements are carefully evaluated and selected for the optimization of equation of state parameters. For some of the fluids, experimental values are scarce, therefore ad hoc estimation methods have been used to supply more information to the procedure for the optimization of the parameters of the equation of state. In addition, saturated liquid density and vapor pressure measurements are correlated with the equations proposed by Daubert and Wagner–Ambrose, respectively, to provide short, simple, and accurate equations for the computation of these properties. The recently developed isobaric ideal-gas heat capacity correlation for the selected siloxanes is included in the thermodynamic models. The performance of the newly developed equations of state is tested by comparison with experimental data and also with predictions calculated with the Peng–Robinson–Stryjek–Vera cubic EoS, as this model was adopted in previous technical studies. The new thermodynamic models perform significantly better than cubic equations of state. T–s and P  – v$v$ diagrams for all the substances are also reported.     

A tethered aminohydroxylation route to l-arabino-[2R,3S,4R] and l-xylo-[2R,3S,4S]-C18-phytosphingosines

A concise and highly efficient synthesis of l-arabino-[2R,3S,4R] and l-xylo-[2R,3S,4S]-C₁₈-phytosphingosines has been achieved. The synthetic strategy features the Sharpless kinetic resolution and tethered aminohydroxylation as the key steps.     

Synthesis, structural determination and magnetic properties of layered hybrid organic-inorganic, iron (II) propylphosphonate, Fe[(CH3(CH2)2PO3)(H2O)], and iron (II) octadecylphosphonate, Fe[(CH3(CH2)17PO3)(H2O)]

Fe[(CH₃(CH₂)₂PO₃)(H₂O)] (1) and Fe[(CH₃(CH₂)₁₇PO₃)(H₂O)] (2) were synthesized by reaction of FeCl₂·6H₂O and the relevant phosphonic acid in water in presence of urea and under inert atmosphere. The compounds were characterized by elemental and thermogravimetric analyses, UV-visible and IR spectroscopy. The crystal structure of (1) was determined from X-ray single crystal diffraction studies at room temperature: monoclinic symmetry, space group P2₁, , , , and β=98.62(3)°. The compound is lamellar and the structure is hybrid, made of alternating inorganic and organic layers along the c direction. The inorganic layers consist of Fe(II) ions octahedrally coordinated by five phosphonate oxygen atoms and one from the water molecule, separated by bi-layers of propyl groups. A preliminary structure characterization of compound (2) suggests a similar layered structure, but with an interlayer spacing of 40.3 Å. The magnetic properties of the compounds were both studied by a dc and ac SQUID magnetometer. Fe[(CH₃(CH₂)₂PO₃)(H₂O)] (1) obeys the Curie-Weiss law at temperatures above 50 K (, ), indicating a Fe +II oxidation state, a high-spin d⁶ (S=2) electronic configuration and an antiferromagnetic exchange couplings between the near-neighbouring Fe(II) ions. Below , Fe[(CH₃(CH₂)₂PO₃)(H₂O)] exhibits a weak ferromagnetism. The critical temperature of has been determined by ac magnetic susceptibility measurements. Compound (2) shows the same paramagnetic behaviour of the iron (II) propyl derivative. The values of C and θ were found to be and −44 K, respectively, thus suggesting the presence of Fe +II ion in the S=2 spin state and antiferromagnetic interactions between Fe(II) ions at low temperatures. Zero-field and field cooled magnetic susceptibility vs. T plots do not overlap below , suggesting the presence of an ordered magnetic state. The critical temperature, T_N, has been located by the peaks at from the ac susceptibility (χ′and χ″) vs. T plots. Below T_N hysteresis loops recorded in the temperature region show an S-shape, while below 15 K assume an ellipsoid form. They reveal that compound (2) is a weak ferromagnet. The critical temperature T_N in these layered Fe(II) alkylphosphonates is independent of the distance between the inorganic layers.     

Mononuclear ruthenium(II) complexes bearing the (S,S)-Pr-pybox ligand

The complexes trans-[RuCl₂(L){(S,S)-ⁱPr-pybox}] ((S,S)-ⁱPr-pybox = 2,6-bis[4′-(S)-isopropyloxazolin-2′-yl]pyridine, L = PMe₃ (1), P(OMe)₃ (2), PPh₂(CH₂CHCH₂) (3), CNBn (5), CNCy (6) and MeCN (7)) have been synthesized by substitution of ethylene on the precursor trans-[RuCl₂(η²-C₂H₄){(S,S)-ⁱPr-pybox}]. This complex also reacts with cyclooctadiene (cod) or norbornadiene (nbd) and NaPF₆, in refluxing methanol, giving the coordination compounds [RuCl(η⁴-cod){(S,S)-ⁱPr-pybox}][PF₆] (8) and [RuCl(η⁴-nbd){(S,S)-ⁱPr-pybox}][PF₆] (9). The structures of complexes [RuCl(CO)(PPh₃)(H-pybox)][BF₄] (H-pybox = 2,6-bis(dihydrooxazolin-2′-yl)pyridine) (4), 6 and 8, have been resolved by X-ray diffraction methods. The catalytic activity of the new complexes in transfer hydrogenation of acetophenone has also been examined.     

An asymmetric synthesis of (2S,3S)-safingol

Two efficient asymmetric syntheses of (2S,3S)-safingol have been developed starting from easily available (R)-cyclohexylideneglyceraldehyde. The key steps in the syntheses were a diastereoselective addition of a suitable alkylmagnesium or lithium reagent, and simple organic transformations. Compared to earlier syntheses, the route involving alkyllithium addition is more viable practically due to its excellent diastereoselectivity, use of inexpensive materials/reagents and operational simplicity.     

Stereoselective synthesis of (+)-(1R,2S,5S,7R)-2-hydroxy-exo-brevicomin

A stereoselective approach for the synthesis of (+)-(1R,2S,5S,7R)-2-hydroxy-exo-brevicomin from l-ascorbic acid has been described. The key steps are highly stereoselective nucleophilic addition reaction on aldehyde 8 and also a single pot transformation of 15 to (+)-(1R,2S,5S,7R)-2-hydroxy-exo-brevicomin. The later tandem reaction which involves the hydrogenation of double bond, debenzylation, MOM deprotection and bicyclic ketal formation was carried under Pd/C, H₂ followed by acid treatment.     

Carbonylvanadium complexes of the tripod ligands MeC(CH2PPh2)3 and P(CH2CH2PPh2)3

UV irradiation of [Et₄N] [V(CO)₆] in the presence of the tripod ligands (L) MeC(CH₂PPh₂)₃ (cp₃) and P(CH₂CH₂PPh₂)₃ (pp₃) yields [Et₄N] [V(CO)₅L], cis-[Et₄N] [V(CO)₄L] and mer-[Et₄N] [V(CO)₃L] (where the meridional configuration for L = cp₃ is uncertain). Except for [Et₄N] [V(CO)₅cp₃], all these species were isolated. The complexes are characterized by their IR, ³¹P and ⁵¹V NMR spectra.     

Evaluation of behaviour of linear monoamines CH3-(CH2)n−1-NH2 (n=1-6) in ion chromatography

This paper reports the results on a study of ion chromatography (IC) behaviour on strong cationic exchange column of CH₃-(CH₂)_n−1-NH₂ (n=1-6) type linear monoamines. The eluents were mixtures of HCl-NaCl, HNO₃-NaNO₃, HClO₄-NaClO₄, H₂SO₄-Na₂SO₄, HClO₄-NaClO₄-CH₃CN. Amines were revealed with an amperometric detector. The influence of different counter-ions on retention factors, k′, is discussed. Relationships between k′ and pE (E=sum of Na⁺ and H⁺ concentrations), and length of alkylic chain, and sensitivity coefficient S, are reported and discussed. The addition of acetonitrile (ACN) in the eluent was also taken into account. Suitable considerations are derived from these data. An example of monoamines separation is given.     

Enantioselective synthesis of d-ribo-(2S,3S,4R)-C18-phytosphingosine using double stereodifferentiation

An enantioselective synthesis of d-ribo-C₁₈-phytosphingosine as its tetraacetate derivative 10, starting from d-mannitol and employing the Sharpless asymmetric dihydroxylation reaction on allylic alcohol 6 as the key step, is described.     

An efficient stereoselective synthesis of (2S,3S)-3-hydroxy-2-phenylpiperidine

A concise enantioselective synthesis of N-Boc-(2S,3S)-3-hydroxy-2-phenylpiperidine 1 is described starting from l-phenyl-glycine and using a Grignard reaction as a key step.     

Selective formation of trans and cis(CH3CN) isomers of [Ru(bpy)(CO)2(CH3CN)2] (bpy=2,2-bipyridine) from [Ru(CO)2(CH3CN)3]2(PF6)2 using an electrochemical oxidation step

The selective in situ synthesis of trans and cis(CH₃CN)-[Ru(bpy)(CO)₂ (CH₃CN)₂]²⁺ isomers from the same [Ru(CO)₂ (CH₃CN)₃]₂²⁺ dimer precursor but using either an electrochemical-chemical or chemical-electrochemical process is described.     

Structure, 31P and 13C chemical shift anisotrophy of (CH3)3P, (CH3)3PO, (CH3)3PS and (CH3)3PSe as determined by liquid crystal NMR spectroscopy

The ¹³P and ¹³C spectra of the triply ¹³C labelled molecules (CH₃)₃P, (CH₃)₃PO, (CH₃)₃PS and (CH₃)₃PSe oriented in a nematic phase are reported. The CPC bond angles have been measured. The ¹³P chemical shift tensor shows a large anisotropy except in the case of (CH₃)₃P. The abnormal large value observed for the PSe bond length suggests a large anisotropy of the ¹J(PSe) spin coupling.     

Syntheses and Characterization of One-Dimensional Antimony(III) Diphosphonates: [NH3(CH2)nNH3][Sb{CH3C(O)(PO3)2}] (n=4, 5)

This paper describes the hydrothermal syntheses and characterization of two antimony(III) diphosphonates: [NH₃(CH₂)_nNH₃]Sb{CH₃C(O)(PO₃)₂} [n=4 (1), 5 (2)]. The two compounds are isostructural based on their XRD measurements. Single-crystal structure determination of compound 1 revealed a one-dimensional linear chain structure where the distorted {SbO₅E} octahedra (E is the lone pair electrons occupying an axial position) are corner-shared by {CPO₃} tetrahedra. The protonated diamines are located between the chains, with their nitrogen atoms locked by the hydrogen bonds with the phosphonate oxygens. Crystal data for 1: orthorhombic, space group Pnma, a=13.426(4), b=17.149(4), c5.4496(14) Å, V=1254.7(6) Aų, Z=4.     

Asymmetric total synthesis of (2S,3S)-3-hydroxypipecolic acid

A synthetic route to (2S,3S)-3-hydroxypipecolic acid was achieved from readily available nonchiral pool starting material cis-2-butene-1,4-diol and involved Claisen orthoester rearrangement, Sharpless asymmetric dihydroxylation and intramolecular lactamisation of azido lactone as the key steps.