Electrocatalytic oxidation behavior of guanosine at graphene, chitosan and Fe3O4 nanoparticles modified glassy carbon electrode and its determination

A graphene, chitosan and Fe₃O₄ nanoparticles (nano-Fe₃O₄) modified glassy carbon electrode (graphene-chitosan/nano-Fe₃O₄/GCE) was fabricated. The modified electrode was characterized by scanning electron microscope and electrochemical impedance spectroscopy. The electrochemical oxidation behavior of guanosine was investigated in pH 7.0 phosphate buffer solution by cyclic voltammetry and differential pulse voltammetry. The experimental results indicated that the modified electrode exhibited an electrocatalytic and adsorptive activities towards the oxidation of guanosine. The transfer electron number (n), transfer proton number (m) and electrochemically effective surface area (A) were calculated. Under the optimized conditions, the oxidation peak current was proportional to guanosine concentration in the range of 2.0 × 10⁻⁶ to 3.5 × 10⁻⁴ mol L⁻¹ with the correlation coefficient of 0.9939 and the detection limit of 7.5 × 10⁻⁷ mol L⁻¹ (S/N = 3). Moreover, the modified electrode showed good ability to discriminate the electrochemical oxidation response of guanosine, guanine and adenosine. The proposed method was further applied to determine guanosine in spiked urine samples and traditional Chinese medicines with satisfactory results.     

Electrochemical behaviors of guanosine on carbon ionic liquid electrode and its determination

The electrochemical behaviors of guanosine on the ionic liquid of N-butylpyridinium hexafluorophosphate (BPPF₆) modified carbon paste electrode (CPE) was studied in this paper and further used for guanosine detection. Guanosine showed an adsorption irreversible oxidation process on the carbon ionic liquid electrode (CILE) with the oxidation peak potential located at 1.12 V (vs. SCE) in a pH 4.5 Britton-Robinson (B-R) buffer solution. Compared with that on the traditional carbon paste electrode, small shift of the oxidation peak potentials appeared but with a great increment of the oxidation peak current on the CILE, which was due to the presence of ionic liquid in the modified electrode adsorbed the guanosine on the surface and promoted the electrochemical response. The electrochemical parameters such as the electron transfer coefficient (α), the electron transfer number (n), and the electrode reaction standard rate constant (k_s) were calculated as 0.74, 1.9 and 1.26 × 10⁻⁴ s⁻¹, respectively. Under the optimal conditions the oxidation peak current showed a good linear relationship with the guanosine concentration in the range from 1.0 × 10⁻⁶ to 1.0 × 10⁻⁴ mol/L by cyclic voltammetry with the detection limit of 2.61 × 10⁻⁷ mol/L (3σ). The common coexisting substances showed no interferences to the guanosine oxidation. The CILE showed good ability to distinguish the electrochemical response of guanosine and guanine in the mixture solution. The urine samples were further detected by the proposed method with satisfactory results.     

Fluorometric determination of fluoride ion by reagent tablets containing 3-hydroxy-2'-sulfoflavone and zirconium(IV) ethylenediamine tetraacetate

A reagent tablet for determination of fluoride ion has been prepared using ethylenediamine-N,N,N′,N′-tetraacetate complex of zirconium (Zr-EDTA), 3-hydroxy-2′-flavone (FS) and an appropriate pH buffer. Dissolving of the tablet into water exhibits an intense blue fluorescence (λ_max = 460 nm) upon excitation at 377 nm and the fluorescence intensity decreases with the presence of fluoride ion. Hence, a simple fluorescent detection procedure for fluoride ion in aqueous media was successfully constructed with this tablet. The principle of this detection system is the ligand exchange reaction of FS bound to Zr-EDTA with fluoride ion. The present system provides an easy, rapid and selective determination method of fluoride ion ranging from 5 × 10⁻⁶ to 1 × 10⁻³ mol dm⁻³. The measurement of real samples with this tablet showed the similar results as those by the common method with the Alfusone reagent.     

Syntheses and investigation of the effects of position and nature of substituent on the spectral,electrochemical and spectroelectrochemical properties of new cobalt phthalocyanine complexes

The syntheses of new cobalt phthalocyanine (CoPc) complexes, tetra-substituted with diethylaminoethanethio at the peripheral (complex 3a) and non-peripheral (complex 3b) positions, and with benzylmercapto at the non-peripheral position (complex 5), are reported. The effects of the nature and position of substituent on the spectral, electrochemical and spectroelectrochemical properties of these complexes are investigated. Solution electrochemistry of complex 3a showed three distinctly resolved redox processes attributed to Co^IIIPc⁻²/Co^IIPc⁻² (E_½ = +0.64 V versus Ag|AgCl), Co^IIPc⁻²/Co^IPc⁻² (E_½ = −0.24 V versus Ag|AgCl) and Co^IPc⁻²/Co^IPc⁻³ (E_½ = −1.26 V versus Ag|AgCl) species. No ring oxidation was observed in complex 3a. Complex 3b showed both ring-based oxidation, attributed to Co^IIIPc⁻¹/Co^IIIPc⁻² species (E_p = +0.86 V versus Ag|AgCl), and ring-based reduction associated with Co^IPc⁻²/Co^IPc⁻³ species (E_½ = −1.46 V versus Ag|AgCl), with the normal metal-based redox processes in CoPc complexes: Co^IIIPc⁻²/Co^IIPc⁻² (E_p = +0.41 V versus Ag|AgCl) and Co^IIPc⁻²/Co^IPc⁻² (E_½ = −0.38 V versus Ag|AgCl). Solution electrochemistry of complex 5 showed the same type and number of species observed in complex 3a: Co^IIIPc⁻²/Co^IIPc⁻² (E_p = +0.59 V versus Ag|AgCl), Co^IIPc⁻²/Co^IPc⁻² (E_½ = −0.26 V versus Ag|AgCl) and Co^IPc⁻²/Co^IPc⁻³ (E_½ = −1.39 V versus Ag|AgCl) species. These processes were confirmed using spectroelectrochemistry.     

Electrochemiluminescent behaviors of alkaloids and tris(2,2'-bipyridine) ruthenium in organically modified silicate film

Electrogenerated chemiluminescences (ECLs) of alkaloids, such as berberine, trigonelline, allantoin and betaine, were studied in an aqueous alkaline buffer solution (pH 9.5), based on tris(2,2′-bipyridine)ruthenium(II) [Ru(bpy)₃²⁺] immobilized in organically modified silicates (ORMOSILs) film on a glassy carbon electrode (GCE). The immobilized Ru(bpy)₃²⁺ showed good electrochemical and photochemical activities. In a flow system, the eluted alkaloids were oxidized on the modified GCE, and reacted with immobilized Ru(bpy)₃²⁺ at the potential of +1.50 V (versus Ag/AgCl). The luminescence with λ_max 610 nm was caused by a reaction of electrolytically formed Ru(bpy)₃³⁺ with an oxidized amine group to generate Ru(bpy)₃^2+*. The determination limit was 5 × 10⁻⁶ mol L⁻¹, 8 × 10⁻⁶ mol L⁻¹, 2.0 × 10⁻⁵ mol L⁻¹ and 5.0 × 10⁻⁵ mol L⁻¹ for berberine, trigonelline, allantoin and betaine at S/N 3, respectively. In addition, the factors affecting the determination of the four alkaloids were also studied.     

Mn(II)-sodium dodecyl sulphate complex mimic enzyme-catalyzed fluorescence quenching of Pyronine B by hydrogen peroxide

Mn(II)-sodium dodecyl sulphate complex (Mn(II)-SDS) is used to mimic the active group of peroxidase. The catalytic characteristic of this mimic enzyme catalyst in the oxidation reaction of fluorescence substrate, tetraethyldiaminoxanthyl chloride (Pyronine B (PB)), with hydrogen peroxide has been studied. The experimental results show that Mn(II)-SDS complex has similar catalytic activity that of peroxidase. The steady-state catalytic rate depends upon mimic enzyme and substrate concentrations, and the Michaelis-Menten parameters K_m, V_max and K_cat are 7.6×10⁻⁶ M, 7.9×10⁻⁷ M s⁻¹ and 7.9 s⁻¹, respectively. The catalytic activity of Mn(II)-SDS complex is compared with those of HRP and Hemin. Though the catalytic activity of Mn(II)-SDS complex is 15.9% of that of HRP, it can catalyze the oxidation reaction of PB with hydrogen peroxide lead to fluorescence quenching of PB. Under optimum conditions, linear relationship between fluorescence quenching F₀/F and concentration of H₂O₂ is in the range of (0.0-3.6) × 10⁻⁷ M. The detection limit is determined to be 3.0×10⁻⁹ M. By coupling this mimic catalytic reaction with the catalytic reaction of glucose oxidase (GOD), glucose can be detected. Linear relationship between F₀/F and concentration of glucose is in the range of (0.0-1.4) × 10⁻⁷ M. The detection limit is determined to be 4.2×10⁻⁹ M. This method is applied to the determination of glucose in human serum and the results are in good agreement with the phenol-4-aminoantipyrine (4-AAP).     

Preparation of cobalt-tetraphenylporphyrin/reduced graphene oxide nanocomposite and its application on hydrogen peroxide biosensor

A novel cobalt-tetraphenylporphyrin/reduced graphene oxide (CoTPP/RGO) nanocomposite was prepared by a π–π stacking interaction and characterized by ultraviolet–visible absorption spectroscopy (UV–vis), Fourier transform infrared spectroscopy (FTIR) and electrochemical impedance spectroscopy (EIS). The CoTPP/RGO nanocomposite exhibited high electrocatalytic activity both for oxidation and reduction of H₂O₂. The current response was linear to H₂O₂ concentration with the concentration range from 1.0 × 10⁻⁷ to 2.4 × 10⁻³ mol L⁻¹ (R = 0.998) at the reductive potential of −0.20 V and from 1.0 × 10⁻⁷ to 4.6 × 10⁻⁴ mol L⁻¹ (R = 0.996) at the oxidative potential of +0.50 V. The H₂O₂ biosensor showed good anti-interfering ability towards oxidative interferences at the oxidative potential of +0.50 V and good anti-interfering ability towards reductive interferences at the reductive potential of −0.20 V.     

Spectrophotometric determination of titanium with o-carboxyphenylfluorone in cationic micellar media, and its equilibrium and kinetic studies

Spectrophotometric determination of titanium(IV) was accomplished with o-carboxyphenylfluorone (OCPF) in the presence of hexadecyltrimethyl ammonium chloride (HTAC) under strongly acidic media. In the determination of titanium(IV), Beer's law was obeyed in the range of 24-340 ng mL⁻¹ with an effective molar absorption coefficient (at 530 nm) and relative standard deviation of 2.24 × 10⁵ dm³ mol⁻¹ cm⁻¹ and 0.64% (n = 8), respectively. The severe interference of iron ions was easily eliminated by the addition of ethylenediaminetetraacetic acid (EDTA); the effects of other foreign substances were low. Equilibrium and kinetic studies under analytical conditions were investigated to quantitatively evaluate the reaction mechanism. The obtained orange complex is considered to be Ti(OCPF)₄. Its stability log K_f and rate constant K_obs are 16.88 and 1.65 × 10⁻² s⁻¹, respectively. It is suggested that the color of the complex is related to the species of OCPF in the solution.     

A novel bimediator amperometric sensor for electrocatalytic oxidation of gallic acid and reduction of hydrogen peroxide

A novel bimediator amperometric sensor is fabricated for the first time by surface modification of graphite electrode with thionine (TH) and nickel hexacyanoferrate (NiHCF). The electrochemical behavior of the TH/NiHCF bimediator modified electrode was characterized by cyclic voltammetry, differential pulse voltammetry and chronoamperometry. The TH/NiHCF bimediator modified electrode exhibited a pair of distinct redox peaks for NiHCF and TH with formal potentials of 0.33 V and −0.27 V vs. SCE at a scan rate of 50 mV s⁻¹ in 0.1 M NaNO₃ and 0.1 M NH₄NO₃ respectively. The electrocatalytic activity of the bimediator modified electrode towards oxidation of gallic acid with NiHCF and reduction of hydrogen peroxide with TH was evaluated and it was observed that the modified electrode showed an electrocatalytic activity towards the oxidation of gallic acid in the concentration range of 4.99 × 10⁻⁶–1.20 × 10⁻³ M with a detection limit of 1.66 × 10⁻⁶ M (S/N = 3) and reduction of H₂O₂ in the concentration range of 1.67 × 10⁻⁶–1.11 × 10⁻³ M with a detection limit of 5.57 × 10⁻⁷ M (S/N = 3). The bimediator modified electrode was found to exhibit good stability and reproducibility.     

A sensitive amperometric sensor for hydrazine and hydrogen peroxide based on palladium nanoparticles/onion-like mesoporous carbon vesicle

Onion-like mesoporous carbon vesicle (MCV) with multilayer lamellar structure was synthesized by a simply aqueous emulsion co-assembly approach. Palladium (Pd) nanoparticles were deposited on the MCV matrix (Pd/MCV) by chemical reduction of H₂PdCl₄ with NaBH₄ in aqueous media. Pd(X)/MCV (X wt.% indicates the Pd loading amount) nanocomposites with different Pd loading amount were obtained by adjusting the ratio of precursors. The particular structure of the MCV results in efficient mass transport and the onion-like layers of MCV allows for the obtainment of highly dispersed Pd nanoparticles. The introduction of Pd nanoparticles on the MCV matrix facilitates hydrazine oxidation at more negative potential and delivers higher oxidation current in comparison with MCV. A linear range from 2.0 × 10⁻⁸ to 7.1 × 10⁻⁵ M and a low detection limit of 14.9 nM for hydrazine are obtained at Pd(25)/MCV nanocomposite modified glassy carbon (GC) electrode. A nonenzymatic amperometric sensor for hydrogen peroxide based on the Pd(25)/MCV nanocomposite modified GC electrode is also developed. Compared with MCV modified GC electrode, the Pd(25)/MCV nanocomposite modified GC electrode displays enhanced amperometric responses towards hydrogen peroxide and gives a linear range from 1.0 × 10⁻⁷ to 6.1 × 10⁻³ M. The Pd(25)/MCV nanocomposite modified GC electrode achieves 95% of the steady-current for hydrogen peroxide within 1 s. The combination of the unique properties of Pd nanoparticles and the porous mesostructure of MCV matrix guarantees the improved analytical performance for hydrazine and hydrogen peroxide.     

Structural, spectroscopic, and magnetic properties of a diphenolate-bridged FeNi complex showing excellent phosphodiester cleavage activity

To mimic the phosphate ester hydrolysis behavior of purple acid phosphatases the heterobimetallic complex [(BNPP)Fe^IIIL(μ-BNPP)Ni^II(H₂O)](ClO₄) (1) has been synthesized from the precursor complexes [Fe^III(LH₂)(H₂O)₂](ClO₄)₃·3H₂O and [Fe^III(LH₂)(H₂O)Cl](ClO₄)₂·2H₂O. In these compounds, L²⁻ is the anion of the tetraiminodiphenol macrocyclic ligand (H₂L), while LH₂ is the zwitterionic form in which the phenolic protons are shifted to the two metal-uncoordinated imine nitrogens, and BNPP is bis(4-nitrophenyl)phosphate. The X-ray crystal structure of compound 1 has been determined. The structure of 1 comprises of two edge-shared distorted octahedrons whose metal centers are bridged by two equatorial phenolate oxygens and two axially disposed oxygens of a BNPP ligand. The internuclear Fe?Ni distance is 3.083 Å. The high-spin iron(III) and nickel(II) in 1 are antiferromagnetically coupled (J = −7.1 cm⁻¹; H = −2JS₁·S₂) with S = 3/2 spin ground state. The phosphodiesterase activity of 1 has been studied in 70:30 H₂O-(CH₃)₂SO medium with NaBNPP as the substrate. The reaction rates have been measured by varying pH (3-10), temperature (25-50 °C), and with different concentrations of the substrate and complex at a fixed pH and temperature. Treatment of the rate data, obtained at pH 6.0 and at 35 °C, by the Michaelis-Menten approach have provided the following parameters: K_M = 3.6 × 10⁻⁴ M, V_max = 1.83 × 10⁻⁷ M s⁻¹, k_cat = 9.15 × 10⁻³ s⁻¹. As compared to the uncatalyzed hydrolysis rate of BNPP, the k_cat value is 8.3 × 10⁸ times higher, showing that 1 behaves as an excellent model for phosphate ester hydrolysis.     

Spectrophotometric determination of carbon tetrachloride via ultrasonic oxidation of iodide accelerated by dissolved carbon tetrachloride

Ultrasonic oxidation of iodide was investigated in the presence of carbon tetrachloride (CCl₄). The ultrasonic oxidation of potassium iodide led to formation of iodine and then I₃⁻ in the presence of excess iodide, and the generated I₃⁻ shows strong UV absorption with a molar absorptivity of 2.31 × 10⁴ L mol⁻¹ cm⁻¹ at the maximum absorption wavelength of 351 nm. The ultrasonic oxidation of iodide was found to be significantly promoted by a small addition of CCl₄, and it was further found that the generation rate was increased with the amount of CCl₄ added. This can be used to analyze the level of CCl₄ dissolved in aqueous solutions. Under optimum conditions, the concentration of generated iodine (or its absorption at 351 nm) was found to correlated linearly with the concentration of CCl₄ in the range of 0.2-50 mg L⁻¹ (detection limit = 0.09 mg L⁻¹, R² = 0.999). As an alternative indirect spectrophotometric method of CCl₄ determination, the proposed method was successfully applied to determine the concentrations of CCl₄ in several practical samples, showing merits of being sensitive and simple of operation.     

Voltammetric determination of pyridoxine (Vitamin B6) at a carbon paste electrode modified with vanadyl(IV)-Salen complex

The preparation and electrochemical characterization of a carbon paste electrode modified with the N,N-ethylene-bis(salicylideneiminato)oxovanadium(IV) complex [VO(Salen)] as well as its behavior in relation to the oxidation of pyridoxine (Vitamin B₆) are described. The electrochemical behavior of the modified electrode and the electrooxidation of pyridoxine were investigated using cyclic voltammetry. The best voltammetric response was obtained for an electrode composition of 15% (m/m) [VO(Salen)] in the paste, KCl solution of pH 5.5-8.0 and scan rate of 25 mV s⁻¹. A sensitive linear voltammetric response for pyridoxine was obtained in the concentration range of 4.5×10⁻⁴ to 3.3×10⁻³ mol l⁻¹ with a slope of 42.5 μA mmol⁻¹ l, and a detection limit (3σ/slope) of 3.7×10⁻⁵ mol l⁻¹ using linear sweep voltammetry. Among several compounds tested only Vitamin B₁ seems to interfere in the analyte signal. The concentrations of pyridoxine in pharmaceutical formulations using the proposed electrode and an official spectrophotometric method based in the reaction with N,N-diethyl-p-phenylenediamine are in agreement at the 95% confidence level and within an acceptable range of error.     

Electrochemical,magnetic, catalytic and DNA cleavage studies of binuclear copper(II) complexes derived from pendant substituted tetraaza macrobicyclic compartmental ligands

A series of macrobicyclic unsymmetrical binuclear copper(II) complexes of compartmental ligands were synthesized from the Schiff base condensation of 1,8[N,N′-bis{(3-formyl-2-hydroxy-5-methyl)benzyl}]-1,4,8,11- tetraaza-5,5,7,12,12,14-hexa methylcyclotetradecane with diamines like 1,2-diamino ethane, 1,3-diamino propane, 1,4-diaminobutane, 1,2-diaminobenzene and 1,8-diaminonaphthalene. The complexes were characterized by elemental and spectral analysis. Electrochemical studies of the copper(II) complexes show two irreversible one-electron reduction processes around E¹_pc = −0.70 to −1.10 V and E²_pc = −0.98 to −1.36 V. ESR spectra of the binuclear copper(II) complexes show a broad signal at g = 2.10 and μ_eff values in the range 1.46–1.59 BM, which convey the presence of antiferromagnetic coupling. Cryomagnetic investigation of the binuclear complexes [Cu₂L³(ClO₄)](ClO₄) and [Cu₂L⁴(ClO₄)](ClO₄) show that the observed −2J values are 144 and 216 cm⁻¹, respectively. The observed initial rate (V_in) for the catalytic hydrolysis of p-nitrophenyl phosphate by the binuclear copper(II) complexes were in the range 1.8 × 10⁻⁵ to 2.1 × 10⁻⁵ Ms⁻¹. The initial rate (V_in) for the catalytic oxidation of catechol to o-quinone by the binuclear copper(II) complexes were in the range 2.7 × 10⁻⁵ to 3.5 × 10⁻⁵ Ms⁻¹. The copper(II) complexes have been found to promote cleavage of plasmid pBR 322 DNA from the supercoiled form I to the open circular form II.     

Kinetic determination of cysteine and thiosulphate by inhibition of Hg(II) catalyzed ligand substitution reaction

The sulphur containing inhibitors (I), cysteine (Cys) and sodium thiosulphate (THS), have been found to inhibit Hg(II) catalyzed exchange of cyanide in hexacyanoferrate(II) by nitroso-R-salt (NRS). The inhibitory effect of both the ligands are attributed to their binding tendencies with Hg(II) leading to the formation of catalyst-inhibitor (C-I) complex. The reactions have been followed spectrophotometrically in aqueous medium at 720 nm by noting the increase in absorbance of the green colour product, [Fe(CN)₅NRS]³⁻ at pH 6.50 ± 0.02, temp 25.0 ± 0.1 °C and ionic strength (μ) 0.1 M (KNO₃). A most plausible mechanistic scheme involving the role of analytes (inhibitors) has been proposed. The values of equilibrium constants for complex formation between catalyst-inhibitor (K_CI), catalyst-substrate (K_S) and Mechaelis-Menton constant (K_m) have been computed from the kinetic data. The linear calibration curves have been established between absorbance and inhibitor concentrations under specified conditions. Cys and THS have been determined in the range 1-5 × 10^− 7 M and 4.9-16.9 × 10^− 7 M respectively. The detection limits have been computed to be 1 × 10^− 7 M and 4.9 × 10^− 7 M for Cys and THS, respectively.     

Electrosorption of Os(III)-complex at single-wall carbon nanotubes immobilized on a glassy carbon electrode: application to nanomolar detection of bromate, periodate and iodate

A simple procedure was developed to prepare a glassy carbon electrode modified with single-wall carbon nanotubes (SWCNTs) and Os(III)-complex. The glassy carbon (GC) electrode modified with CNTs was immersed into Os(III)-complex solution (direct deposition) for a short period of time (60 s). 1,4,8,12-Tetraazacyclotetradecane osmium(III) chloride, (Os(III)LCl₂)·ClO₄, irreversibly and strongly adsorbed on SWCNTs immobilized on the surface of GC electrode. Cyclic voltammograms of the Os(III)-complex-incorporated-SWCNTs indicate a pair of well defined and nearly reversible redox couple with surface confined characteristic at wide pH range (1-8). The surface coverage (Γ) and charge transfer rate constant (k_s) of the immobilized Os-complex on SWCNTs were 3.07 × 10⁻⁹ mol cm⁻², 5.5 (±0.2) s⁻¹, 2.94 × 10⁻⁹ mol cm⁻², 7.3 (±0.3) s⁻¹ at buffer solution with pH 2 and 7, respectively, indicate high loading ability of SWCNTs for Os(III) complex and great facilitation of the electron transfer between electroactive redox center and carbon nanotubes immobilized on the electrode surface. Modified electrodes showed higher electrocatalytic activity toward reduction of BrO₃⁻, IO₃⁻ and IO₄⁻ in acidic solutions. The catalytic rate constants for catalytic reduction bromate, periodate and iodate were 3.79 (±0.2) × 10³, 7.32 (±0.2) × 10³ and 1.75 (±0.2) × 10³ M⁻¹ s ⁻¹, respectively. The hydrodynamic amperometry of rotating modified electrode at constant potential (0.3 V) was used for nanomolar detection of selected analytes. Excellent electrochemical reversibility of the redox couple, good reproducibility, high stability, low detection limit, long life time, fast amperometric response time, wide linear concentration range, technical simplicity and possibility of rapid preparation are great advantage of this sensor.     

Detection of cationic guest molecules by quenching of luminescence of a self-assembled host molecule consisting of terbium(III) and calix[4]arene-p-tetrasulfonates

By self-assembly in aqueous solution, calix- (CAS) and thiacalix[4]arene-p-tetrasulfonate (TCAS) formed luminescent complexes Tb^III·(CAS)₂ and Tb^III·TCAS, respectively, which were utilized as a host for cationic guests. Addition of 1-ethylpyridinium guest quenched luminescence of Tb^III·(CAS)₂ in accordance with the Stern-Volmer (SV) relation with a low detection limit (D.L.) of 5.94 × 10⁻⁸ M (S/N = 3, M ≡ mol dm⁻³). On the other hand, 1-ethylquinolinium quenched luminescence of Tb^III·TCAS most efficiently, affording a very low D.L. (6.71 × 10⁻¹⁰ M). The agreement of the SV coefficients obtained with luminescent intensity (K_SV,all = 6.74 × 10⁶ M⁻¹) and lifetime (K_SV,Tb = 6.50 × 10⁶ M⁻¹) implied that dynamic quenching of ⁵D₄ excited state of Tb^III was predominant in the quenching processes. The quenching rate was estimated to be k_q,Tb = 9.94 × 10⁹ M⁻¹ s⁻¹, which was as fast as diffusion-limited rate. Quenching of Tb^III·(CAS)₂ was also applied to detection of NAD⁺, with a D.L. of 2.78 × 10⁻⁷ M.     

Flow-injection determination of hydrogen peroxide based on fluorescence quenching of chromotropic acid catalyzed with Fe(II)

Flow-injection analysis system (FIA system), which was based on Fe(II)-catalyzed oxidation of chromotropic acid with hydrogen peroxide, was developed for the determination of hydrogen peroxide. The chromotropic acid has a fluorescence measured at λ_em = 440 nm (emission wavelength) with λ_ex = 235 nm (excitation wavelength), and the fluorescence intensity at λ_em = 440 nm quietly decreased in the presence of hydrogen peroxide and Fe(II), which was caused by Fe(II)-catalyzed oxidation of chromotropic acid with hydrogen peroxide. By measuring the difference of fluorescence intensity, hydrogen peroxide (1.0 × 10⁻⁸-1.0 × 10⁻³ mol L⁻¹) could be determined by the proposed FIA system, whose analytical throughput was 40 samples h⁻¹. The relative standard deviation (RSD) was 1.03% (n = 10) for 4.0 × 10⁻⁸ mol L⁻¹ hydrogen peroxide. The proposed FIA technique could be applied to the determination of hydrogen peroxide in rain water samples.     

Biomimetic sensor based on MnMn complex as manganese peroxidase mimetic for determination of rutin

A novel biomimetic sensor for rutin determination based on a dinuclear complex [Mn^IIIMn^II(Ldtb)(μ-OAc)₂]BPh₄ containing an unsymmetrical dinucleating ligand, 2-[N,N-bis(2-pyridylmethyl)-aminomethyl]-6-[N-(3,5-di-tert-butyl-2-oxidoben-zyl)-N-(2-pyridylamino)aminomethyl]-4-methylphenol (H₂Ldtb), as a manganese peroxidase mimetic was developed. Several parameters were investigated to evaluate the performance of the biomimetic sensor obtained after the incorporation of the dinuclear complex in a carbon paste. The best performance was obtained in 75:15:10% (w/w/w) of the graphite powder:Nujol:Mn^IIIMn^II complex, 0.1 mol L⁻¹ phosphate buffer solution (pH 6.0) and 4.0 × 10⁻⁵ mol L⁻¹ hydrogen peroxide. The response of the sensor towards rutin concentration was linear using square wave voltammetry in the range of 9.99 × 10⁻⁷ to 6.54 × 10⁻⁵ mol L⁻¹ (r = 0.9998) with a detection limit of 1.75 × 10⁻⁷ mol L⁻¹. The recovery study performed with pharmaceuticals ranged from 96.6% to 103.2% and the relative standard deviation was 1.85% for a solution containing 1.0 × 10⁻³ mol L⁻¹ rutin (n = 6). The lifetime of this biomimetic sensor was 200 days (at least 750 determinations). The results obtained for rutin in pharmaceuticals using the biomimetic sensor and those obtained with the official method are in agreement at the 95% confidence level.     

Biosensor based on laccase and an ionic liquid for determination of rosmarinic acid in plant extracts

Novel biosensors based on laccase from Aspergillus oryzae and the ionic liquids (ILs) 1-n-butyl-3-methylimidazolium hexafluorophosphate (BMIPF₆) and 1-n-butyl-3-methylimidazolium tetrafluoroborate (BMIBF₄) were constructed for determination of rosmarinic acid by square-wave voltammetry. The laccase catalyzes the oxidation of rosmarinic acid to the corresponding o-quinone, which is electrochemically reduced back to rosmarinic acid at +0.2 V vs. Ag/AgCl. The biosensor based on BMIPF₆ showed a better performance than that based on BMIBF₄. The best performance was obtained with 50:20:15:15% (w/w/w/w) of the graphite powder:laccase:Nujol:BMIPF₆ composition in 0.1 mol L⁻¹ acetate buffer solution (pH 5.0). The rosmarinic acid concentration was linear in the range of 9.99 × 10⁻⁷ to 6.54 × 10⁻⁵ mol L⁻¹ (r = 0.9996) with a detection limit of 1.88 × 10⁻⁷ mol L⁻¹. The recovery study for rosmarinic acid in plant extract samples gave values from 96.1 to 105.0% and the concentrations determined were in agreement with those obtained using capillary electrophoresis at the 95% confidence level. The BMIPF₆-biosensor demonstrated long-term stability (300 days; 920 determinations) and reproducibility, with a relative standard deviation of 0.56%.