Silicon-carbon unsaturated compounds. 73. Photolysis of cis- and trans-1,2-dimethyl-1,2-diphenyl-1,2-disilacyclohexane in the presence of tert-butyl alcohol and acetone

Irradiation of cis-1,2-dimethyl-1,2-diphenyl-1,2-disilacyclohexane (1a) in the presence of tert-butyl alcohol in hexane with a low-pressure mercury lamp bearing a Vycor filter proceeded with high stereospecificity to give cis-2,3-benzo-1-tert-butoxy-1,4-dimethyl-4-phenyl-1,4-disilacyclooct-2-ene (2a), in 33% isolated yield, together with a 15% yield of 1-[(tert-butoxy)methylphenylsilyl]-4-(methylphenylsilyl)butane (3). The photolysis of trans-1,2-dimethyl-1,2-diphenyl-1,2-disilacyclohexane (1b) with tert-butyl alcohol under the same conditions gave stereospecifically trans-2,3-benzo-1-tert-butoxy-1,4-dimethyl-4-phenyl-1,4-disilacyclooct-2-ene (2b) in 41% isolated yield, along with a 12% yield of 3. Similar photolysis of 1a and 1b with tert-butyl alcohol-d₁ produced 2a and 2b, respectively, in addition to 1-[(tert-butoxy)(monodeuteriomethyl)(phenyl)silyl]-4-(methylphenylsilyl)butane. When 1a and 1b were photolyzed with acetone in a hexane solution, cis- and trans-2,3-benzo-1-isopropoxy-1,4-dimethyl-4-phenyl-1,4-disilacyclooct-2-ene (4a and 4b) were obtained in 25% and 23% isolated yield. In both photolyses, 1-(hydroxymethylphenylsilyl)-4-(methylphenylsilyl)butane (5) was also isolated in 4% and 5% yield, respectively. The photolysis of 1a with acetone-d₆ under the same conditions gave 4a-d₆ and 5-d₁ in 18% and 4% yields.     

Regio- and stereoselective reactions of a rhodanine derivative with optically active 2-methyl- and 2-phenyloxirane

The reaction of a rhodanine derivative (=(Z)-5-benzylidene-3-phenyl-2-thioxo-1,3-thiazolidin-4-one; 1) with (S)-2-methyloxirane (2) in the presence of SiO₂ in dry CH₂Cl₂ for 10 days led to two diastereoisomeric spirocyclic 1,3-oxathiolanes 3 and 4 with the Me group at C(2) (Scheme 2). The analogous reaction of 1 with (R)-2-phenyloxirane (5) afforded also two diastereoisomeric spirocyclic 1,3-oxathiolanes 6 and 7 bearing the Ph group at C(3) (Scheme 3). The structures of 3, 4, 6, and 7 were confirmed by X-ray crystallography (Figs. 1 and 2). These results show that oxiranes react selectively with the thiocarbonyl group (CS) in 1. Furthermore, the nucleophilic attack of the thiocarbonyl S-atom at the SiO₂-activated oxirane ring proceeds with high regio- and stereoselectivity via an S_N2-type mechanism.     

Effect of ortho-substituents on the stereochemistry of 2-(o-substituted phenyl)-1H-imidazoline-palladium complexes

Palladium complexes composed of [Pd(Ln)₂Cl₂] (n = 1, 2, 3, 4, 6), [L5a]₂[PdCl₄] and [Pd(L5b)₂], where L1 = 4,5-dihydro-2-phenyl-1H-imidazole (=2-phenyl-1H-imidazoline), L2 = 2-(o-fluorophenyl)-1H-imidazoline, L3 = 2-(o-methylphenyl)-1H-imidazoline, L4 = 2-(o-tert-butylphenyl)-1H-imidazoline, L5a = 2-(o-hydroxyphenyl)-1H-imidazolinium, L5b = 2-(1H-imidazolin-2-yl)phenolate, and L6 = 2-(o-methylphenyl)-1H-imidazole, were synthesized. Molecular structures of the isolated palladium complexes were characterized by single crystal X-ray diffraction analysis. The effect of ortho-substituents on the phenyl ring on trans-chlorine geometry was noted for complexes [Pd(L1)₂Cl₂] 1a and 1b, [Pd(L2)₂Cl₂] 2 and [Pd(L6)₂Cl₂] 6, whereas cis-chlorine geometry was observed for [Pd(L3)₂Cl₂] 3 and [Pd(L4)₂Cl₂] 4. PdCl₂ reacts with 2-(o-hydroxyphenyl)-1H-imidazoline in DMF to give [L5a]⁺ and [L5b]^- so that [L5a]₂[PdCl₄] 5a and [Pd(L5b)₂] 5b were obtained. In complex 5b, as an N,O-bidentate ligand, two ligands L5b coordinated with the central Pd(II) ion in the trans-form. The coordination of PdCl₂ with 2-(o-hydroxyphenyl)-1H-imidazolines in solution was investigated by NMR spectroscopy.     

The first synthesis and X-ray structures of polyfluorinated 1,2-, 2,3- and 2,4a-dihydro-1,3-diazafluorenes

Acetic acid-catalyzed condensation of 2-amino-3-(1-imino-2,2,2-trifluoroethyl)-1,1,4,5,6,7-hexafluoroindene (1b) with acetone and cyclopentanone gives 5,6,7,8,9,9-hexafluoro-2,2-dimethyl-4-trifluoromethyl-2,3-dihydro-1,3-diazafluorene (2a) and 5,6,7,8,9,9-hexafluoro-4-trifluoromethyl-2,3-dihydro-1,3-diazafluorene-2-spiro-1′-cyclopentane (3a) together with small amounts of 5,6,7,8,9,9-hexafluoro-2,2-dimethyl-4-trifluoromethyl-1,2-dihydro-1,3-diazafluorene (2b) and 5,6,7,8,9,9-hexafluoro-4-trifluoromethyl-1,2-dihydro-1,3-diazafluorene-2-spiro-1′-cyclopentane (3b), respectively. When acted upon by (CH₃)₂SO₄ compounds 2, 3 were converted into corresponding fluorine-containing 1-methyl-1,2-dihydro-1,3-diazafluorenes 6, 7. 4a-Chloro-5,6,7,8,9,9-hexafluoro-2,2-dimethyl-4-trifluoromethyl-2,4a-dihydro-1,3-diazafluorene (8) has been synthesized by the interaction of compound 2 with SOCl₂. Solution of compound 2 as well as 8 in CF₃SO₃H-CD₂Cl₂ generated 5,6,7,8,9,9-hexafluoro-2,2-dimethyl-4-trifluoromethyl-1,2,3,4-tetrahydro-1,3-diazafluorene-4-yl cation (2c). The structures of compounds 2, 3, 6-8 have been determined by single crystal X-ray diffraction.     

The reaction of 4-amino-2-oxazolines with isocyanates and isothiocyanates. Synthesis and X-ray structures of polysubstituted 2-imidazolidinones, 1,3-oxazolidines and 1,3-thiazolidines

Reactions of 4-alkylamino-2-phenyl-2-oxazolines 1 with isocyanates and isothiocyanates provide unprecedented efficient and regioselective heterocycle-heterocycle transformations. Compounds 1 reacted rapidly with tosyl isocyanate yielding directly 3-alkyl-4-benzamido-1-tosyl-2-imidazolidinones 4 in almost quantitative yields. The corresponding ureido intermediates 2 were not isolable species. However, the reactions with non-sulfonylated isocyanates or isothiocyanates were slower, leading to the expected ureido and thioureido derivatives 5, which were easily and efficiently transformed to either polysubstituted 2-imino-1,3-oxazolidine or 2-imino-1,3-thiazolidine hydrochlorides 7, respectively, by treatment with hydrochloric acid. The possible reasons for this disparity in chemical behaviour are discussed. X-ray crystallographic structures for 4-benzamido-3-methyl-1-tosyl-2-imidazolidinone 4b, 4-[1-isopropyl-3-(4-nitrophenyl)ureido]-2-phenyl-2-oxazoline 5e, (Z)-3-benzyl-4-benzamido-2-phenylimino-1,3-oxazolidine hydrochloride 7a and (Z)-3-benzyl-4-benzamido-2-phenylimino-1,3-thiazolidine hydrochloride 7b have been determined.     

A one-pot synthesis and 1,3-dipolar cycloaddition of [1,2]dithiolo[4,3-b]indole-3(4H)-thiones

Treatment of N-substituted 2-methyl-1H-indoles 1 with S₂Cl₂ and DABCO in chloroform gave the corresponding [1,2]dithiolo[4,3-b]indole-3(4H)-thiones 5 by the addition of triethylamine in high yield. 1,2-Dithiole-3-thiones 5 underwent cycloaddition with one or two DMAD equivalents to afford either 2-(3-thioxo-1,3-dihydro-2H-indol-2-ylidene)-1,3-dithioles 10 or fused 4,5-dihydrothiopyrano[3,2-b]indoles 9.     

Synthesis of indenes by ytterbium-catalyzed carboalkoxylation/Friedel-Crafts reaction of arylidenecyclopropanes with acetals

Ytterbium-catalyzed tandem carboalkoxylation/Friedel-Crafts reaction of arylidenecyclopropanes 1 with acetals 2 afforded the corresponding indene derivatives 3 in good to high yields. For example, in the presence of 10 mol % of Yb(OTf)₃ the reaction of 1-phenylbenzylidenecyclopropane 1a with the dimethyl acetals of benzaldehyde 2a, p-tolualdehyde 2b, and p-anisaldehyde 2c gave 1,3-diphenyl-2-(2-methoxyethyl)indene 3a, 2-(2-methoxyethyl)-3-phenyl-1-(p-tolyl)indene 3b, and 1-(p-anisyl)-2-(2-methoxyethyl)-3-phenylindene 3c in 82%, 80%, and 80% yields, respectively.     

Pyrrolide-imine benzyl complexes of zirconium and hafnium: synthesis, structures, and efficient ethylene polymerization catalysis

A series of pyrrolyl-imines HL^1-6 was prepared by the condensation of pyrrole-2-carboxyaldehyde with different amines. The reaction of 2 equiv of pyrrolyl-imine with tetrabenzyl complexes of hafnium and zirconium M(CH₂Ph)₄ (M=Hf or Zr) gave dibenzyl complexes (L^3-6)₂M(CH₂Ph)₂, which were characterized by NMR spectroscopy and crystal structure analysis. NMR spectra of the complexes with secondary alkyl substituents at the imine nitrogen (isopropyl: 3a, 4-tert-butylcyclohexyl: 4a and 4b) suggest that rapid racemization between Δ and Λ configurations occurs in solution on the NMR time scale. The complexes with pyrrolide-imine ligands with a tertiary alkyl group such as tert-butyl (5a and 5b) or 1-adamantyl (6a and 6b) at the imine nitrogen possess cis-configured benzyl groups. Hafnium complexes 5a and 6a react with B(C₆F₅)₃ in bromobenzene-d₅ to give the corresponding cationic benzyl complexes, which exhibit high activity for ethylene polymerization (5a: 2242 kg-polymer/ mol-Hf h bar, 6a: 2096 kg-polymer/ mol-Hf h bar). Zirconium complexes 5b and 6b display a remarkably high ethylene polymerization activity when activated with methylaluminoxane (5b: 17,952 kg-polymer/mol-Zr h bar, 6b: 22,944 kg-polymer/mol-Zr h bar).     

Greener fluorous chemistry: Convenient preparation of new types of ‘CF3-rich’ secondary alkyl mesylates and their use for the synthesis of azides, amines, imidazoles and imidazolium salts

2,2,2-Trifluoroethanol, 1,1,1,3,3,3-hexafluoro-2-propanol, and nonafluoro-tert-butyl alcohol were used as precursors for the preparation of the appropriate bis(polyfluoroalkoxymethyl)carbinols [(R_FHOCH₂)₂CHOH, 1a-c, R_FH = (a) CF₃CH₂, (b) (CF₃)₂CH, and (c) (CF₃)₃C] and the corresponding mesylates [(R_FHOCH₂)₂CHOSO₂CH₃, 2a-c]. This novel design paradigm is introduced to eliminate the persistence and bioaccumulation problems of fluorous chemistry, which are associated with the use of longer linear perfluoroalkyl groups (e.g. R_fn ≥ n-C₈F₁₇, n-C₇F₁₅). Secondary mesylates 2a,b and the primary tosylate [(CF₃)₃COCH₂CH₂OTs, 2d] displayed acceptable reactivity towards azide and imidazole nucleophiles to allow the syntheses of novel fluorous azides, which on hydrogenolysis with H₂/Pd-C offered fluorous amines [(R_FHOCH₂)₂CHNH₂, 8a,b], and 1-(polyfluoroalkyl)imidazoles (5a,b,d), respectively, while 2c showed no reactivity due to steric hindrance. The reaction of 8a,b with formaline, glyoxal and hydrochloric acid gave symmetrical 1,3-dialkylated imidazolium chlorides (9a,b), while 5a,b,d were effectively alkylated using n-C₈F₁₇(CH₂)₃I, methyl iodide, 2-bromoethanol, and 2d to yield the corresponding 1,3-dialkylimidazolium iodides, bromides, and tosylates (7aa-ec). Some physical properties of new compounds including mp, bp and solubility patterns were also analyzed; and the fluorophilicity values of 1a-c, and 2a-c were experimentally determined by GC and/or ¹⁹F NMR spectroscopy.     

Synthesis and structure of highly substituted pyrazole ligands and their complexes with platinum(II) and palladium(II) metal ions

Reaction of 3-methoxycarbonyl-2-methyl- or 3-dimethoxyphosphoryl-2-methyl-substituted 4-oxo-4H-chromones 1 with N-methylhydrazine resulted in the formation of isomeric, highly substituted pyrazoles 4 (major products) and 5 (minor products). Intramolecular transesterification of 4 and 5 under basic conditions led, respectively, to tricyclic derivatives 7 and 8. The structures of pyrazoles 4a (dimethyl 2-methyl-4-oxo-4H-chromen-3-yl-phosphonate) and 4b (methyl 4-oxo-2-methyl-4H-chromene-3-carboxylate) were confirmed by X-ray crystallography. Pyrazoles 4a and 4b were used as ligands (L) in the formation of ML₂Cl₂ complexes with platinum(II) or palladium(II) metal ions (M). Potassium tetrachloroplatinate(II), used as the metal ion reagent, gave both trans-[Pt(4a)₂Cl₂] and cis-[Pt(4a)₂Cl₂], complexes with ligand 4a, and only cis-[Pt(4b)₂Cl₂] isomer with ligand 4b. Palladium complexes were obtained by the reaction of bis(benzonitrile)dichloropalladium(II) with the test ligands. trans-[Pd(4a)₂Cl₂] and trans-[Pd(4b)₂Cl₂] were the exclusive products of these reactions. The structures of all the complexes were confirmed by IR, ¹H NMR and FAB MS spectral analysis, elemental analysis and Kurnakov tests.     

Si-C coupling reaction of polychloromethanes with HSiCl3 in the presence of Bu4PCl: Convenient synthetic method for bis(chlorosilyl)methanes

Coupling reaction of polychloromethanes CH_4−nCl_n (n = 2-4) with HSiCl₃ in the presence of tetrabutylphosphonium chloride (Bu₄PCl) as a catalyst occurred at temperatures ranging from 30 °C to 150 °C. The reactivity of polychloromethanes increases as the number of chlorine-substituents on the carbon increases. In the reactions of CCl₄ with HSiCl₃, a variety of coupling products such as bis(chlorosilyl)methanes CH₂(SiCl₃)(SiXCl₂) [X = Cl (1a), H (1b)], (chlorosilyl)trichloromthanes Cl₃CSiXCl₂ [X = Cl (2a), H (2b)], and (chlorosilyl)dichloromthanes Cl₂HCSiXCl₂ [X = Cl (3a), H (3b)] were obtained along with reductive dechlorination products such as CHCl₃ and CH₂Cl₂ depending on the reaction temperature. In the reaction of CCl₄, 2a is formed at the initial stage of the coupling reaction and converted to give CHCl₃ at low temperature of 30 °C, to give 1a, 3a, and CHCl₃ at 60 °C, and to afford 1a as major product and CH₂Cl₂ in competition above 100 °C. Si-H bond containing silylmethanes can be formed by the H-Cl exchange reaction with HSiCl₃. Reaction of CHCl₃ with HSiCl₃ took placed at 80 °C to give three compounds 1a, 3a, and CH₂Cl₂, and finally 3a was converted to give 1a and CH₂Cl₂ at longer reaction time. While the condition for the reaction of CH₂Cl₂ with HSiCl₃ required a much higher temperature of 150 °C. Under the optimized conditions for synthesizing bis(chlorosilyl)methanes 1a,b, a mixture of 1a and 1b were obtained as major products in 65% (1a:1b = 64:1) and 47% (42:5) yields from the reaction of CCl₄ and CHCl₃ at 100 °C for 8 h, respectively, and in 41% (34:7) yield from that of CH₂Cl₂ at 170 °C for 12 h. In the Si-C coupling reaction of polychloromethanes with HSiCl₃, it seems likely that a trichlorosilyl anion generated from the reaction of HSiCl₃ with Bu₄PCl is an important key intermediate.     

Syntheses and coordination behaviour of 2-(ortho-phosphinophenyl)-functionalised 1,3-dioxolanes and 1,3-dioxanes towards a [(COD)Rh]-complex fragment - models for immobilised complexes

The syntheses are reported of the ether-phosphine ligands: 2-(ortho-diphenylphosphinophenyl)-1,3-dioxolane (1a), 2-(ortho-diisopropylphosphinophenyl)-1,3-dioxolane (1b), 2-(ortho-diphenylphosphinophenyl)-1,3-dioxane (1c), 2-(ortho-diisopropylphosphinophenyl)-1,3-dioxane (1d). Their reaction with [(COD)RhCl]₂ (COD: 1,5-cyclooctadiene) results in the formation of the mononuclear complexes: {chloro(COD)[2-(ortho-diphenylphosphinophenyl)-1,3-dioxolane]rhodium(I)} (2a), {chloro(COD)[2-(ortho-diisopropylphosphinophenyl)-1,3-dioxolane]rhodium(I)} (2b), {chloro(COD)[2-(ortho-diphenylphosphinophenyl)-1,3-dioxane]rhodium(I)} (2c), and {chloro(COD)[2-(ortho-diisopropylphosphinophenyl)-1,3-dioxane]rhodium(I)} (2d). The chloride ligands of compounds 2a and 2b were abstracted with TlPF₆, with accompanied insertion of an acetal oxygen atom of the ligands 1a and 1b into the coordination sphere of the metal centre, producing {(COD)[η²-P,O-2-(ortho-diphenylphosphinophenyl)-1,3-dioxolane]rhodium(I)}PF₆ (3a∗PF₆) and {(COD)[η²-P,O-2-(ortho-diisopropylphosphinophenyl)-1,3-dioxolane]rhodium(I)}PF₆ (3b∗PF₆). In contrast the dioxane analogues of 3, 3c∗BF₄ and 3d∗BF₄, were formed by reacting the ligands 1c, 1d with [Rh(COD)₂]BF₄. The ligands 1 and the complexes 2 serve as model compounds for their via acetalation to a polyvinylalcohol resin bound analogues. The complexes synthesised were employed as pre-catalysts in the hydroformylation reaction of 1-octene.     

Effect of chain length on the formation of intramolecular and intermolecular products: Reaction of diols with cyclotriphosphazene

The reactions of cyclotriphosphazene, N₃P₃Cl₆ (1), in a 1:1.2 stoichiometry with the sodium derivative of seven diols [ethane- (2a), 1,3-propane- (2b), 1,4-butane- (2c), 1,5-pentane- (2d), 1,6-hexane- (2e), 1,8-octane- (2f) and 1,10-decane- (2g) diol] in THF solution at room temperature have been used to investigate the effect of chain length on the formation of reaction products. Although no new products were found for the reaction of 1 with diols 2a-c compared to those in the literature using other bases and solution conditions, the reactions of 1 with the diols 2d-g gave six different types of products, whose structures have been characterized by elemental analysis, mass spectrometry, ¹H and ³¹P NMR spectroscopy; ansa compounds N₃P₃Cl₄[O(CH₂)_nO], (5d-5g); single-bridged compounds N₃P₃Cl₅[O(CH₂)_nO]N₃P₃Cl₅(6d-6f); double-bridged compounds N₃P₃Cl₄[O(CH₂)_nO]₂N₃P₃Cl₄ (7d-7g, syn and anti) and triple-bridged compounds, N₃P₃Cl₃[O(CH₂)_nO]₃N₃P₃Cl₃ (8d-f). Where suitable single crystals were obtained, X-ray crystallographic studies confirmed the structures of two ansa compounds (5d and 5f), one single-bridged compound (6e), and five double-bridged compounds (meso-anti for 7d, 7e, 7f and meso-syn for 7d and 7f). ³¹P NMR measurements of the reaction mixtures were used to quantify the formation of products for the reactions 1 with all the diols, 2a-g; it is found that, with increasing chain length of the diol, there is a decrease in the products formed by intramolecular reactions (spiro and ansa derivatives) and a concomitant increase in the amounts of products formed by intermolecular reactions (single-, double- and triple-bridged derivatives) of cyclophosphazene.     

Synthesis of aromatic tetracyclic tin compounds by template and transmetallation reactions: Alkyl vs aryl migration from tin to nitrogen

The syntheses of [bis(3,5-di-tert-butyl-2-hydroxy-2-phenyl)amine]diphenyltin (1) and [bis(3,5-di-tert-butyl-2-hydroxy-2-phenyl)amine]dichloro-phenyl-stannate (2) by template reactions using 3,5-di-tert-butylcatechol, aqueous ammonia and SnPh₂Cl₂ are reported. We also report the syntheses of compounds 2, [bis(3,5-di-tert-butyl-2-hydroxy-2-phenyl)amine]trichloro-stannate (4), [bis(3,5-di-tert-butyl-2-hydroxy-2-phenyl)methylamine]chloro-methyltin (5), and [bis(3,5-di-tert-butyl-2-hydroxy-2-phenyl)-n-butylamine]n-butyl-chlorotin (6) and [bis(3,5-di-tert-butyl-2-hydroxy-2-phenyl)amine]n-butyl-dichloro-stannate (7), performed by transmetallation reactions of the octahedral zinc coordination compound Zn[3,5-di-tert-butyl-1,2-quinone-(3,5-di-tert-butyl-2-hydroxy-1-phenyl)imine]₂ (3) with SnPhCl₃ or SnPh₂Cl₂, SnCl₄, SnMe₂Cl₂, Sn(nBu)₂Cl₂ and Sn(nBu)Cl₃, respectively. The X-ray diffraction structures of compounds 1, 2, 4 and 6 are reported. The transmetallation reactions with Sn(alkyl)₂Cl₂ afforded pentacoordinated tin compounds, where an alkyl group migrated from tin to nitrogen, while similar reactions with Sn-Ph compounds did not present any phenyl group migration.     

Self-sacrificing acetylation observed during attempted desilylation of 1-[4-benzenesulfonyl-3-O-(tert-butyldimethylsilyl)-2-deoxy-5-O-methanesulfonyl-α-l-threo-pentofuranosyl]thymine

Desilylation of 1-[4-benzenesulfonyl-3-O-(tert-butyldimethylsilyl)-2-deoxy-5-O-methanesulfonyl-α-l-threo-pentofuranosyl]thymine (4) with Bu₄NF/THF, when carried out at room temperature, gave four products. Among these, there were 1-[3-O-acetyl-4-benzenesulfonyl-2-deoxy-5-O-methanesulfonyl-α-l-threo-pentofuranosyl]thymine (7) and thymine. A possible reaction mechanism is proposed, which suggests the origin of 3′-O-acetyl group of 7 and thymine as well as structures of the other two products (9a and 9b).     

Syntheses of methylene-bridged ansa-zirconocene complexes and copolymerization studies of ethylene and norbornene

Methylene-bridged ansa-metallocene complexes bearing substituents on the cyclopentadienyl (Cp) and fluorenyl (Flu) moieties, namely methylene[9-(2,7-di-tert-butyl)fluorenyl(2-(1,3-dimethylcyclopentadienyl))]zirconium dichloride (1a) and its analogue, methylene[(9-(2,7-di-tert-butyl)fluorenyl(2-(1-methyl-3-phenyl)cyclopentadienyl))]zirconium dichloride (2a), have been prepared from (2,7-di-tert-butyl)-9-prop-2-ynyl-9H-fluorene (2). This procedure includes the use of 3-bromo-1-propyne which affords the methylene bridging unit by way of an intermolecular Pauson-Khand reaction in which norbornadiene and a pendant alkyne cyclize to form a ring that later becomes a substituted cyclopentadienyl group. Ethylene-norbornene (E-N) copolymerization was then carried out using these new complexes (1a and 1b) in the presence of methylaluminoxane (MAO) as a cocatalyst; these activities can be compared to that of isopropylene[9-fluorenyl-cyclopentadienyl]zirconium dichloride (3a). The activity of catalyst 1a was comparable to that of 3a but much higher than that of 2a. In addition, 1a shows higher norbornene insertion performance, and gives an E-N copolymer with a higher glass transition temperature (T_g) than 2a under identical conditions; both 1a and 2a give a lower T_g polymer than 3a does.     

Hypervalent and binuclear silicon and germanium derivatives from bis-(3,5-di-tert-butyl-2-phenol)-oxamide

The reactions of bis-(3,5-di-tert-butyl-2-phenol)oxamide (1) with Cl₂SiR₂ (Me or Ph) or Cl₂GeR₂ (Me, nBu or Ph) in THF provided binuclear pentacoordinated silicon and germanium compounds: bis-(3,5-di-tert-butyl-2-oxo-phenyl)-oxamido-bis-dimethylsilane (2), bis-(3,5-di-tert-butyl-2-oxo-phenyl)-oxamido-bis-diphenylsilane (3), bis-(3,5-di-tert-butyl-2-oxo-phenyl)-oxamido-bis-dimethylgermane (4), bis-(3,5-di-tert-butyl-2-oxo-phenyl)-oxamido-bis-di-n-butylgermane (5) and bis-(3,5-di-tert-butyl-2-oxo-phenyl)-oxamido-bis-diphenylgermane (6). The mono-nuclear tetracoordinated silicon compounds N-acetyl-bis-(3,5-di-tert-butyl-2-oxo-phenyl)-amide-bis-(dimethylsilane) (8) and N-acetyl-bis-(3,5-di-tert-butyl-2-oxo-phenyl)-amide-bis-(diphenylsilane) (9) were synthesized from N-(3,5-di-tert-butyl-2-phenol)acetamide (7) and Cl₂SiR₂ (R = Me and Ph). Comparison of the ²⁹Si NMR chemical shifts of the penta- (2 and 3) and tetracoordinated (8 and 9) silicon compounds provided information about the intramolecular coordination of the carbonyl group to the silicon atom. Compounds 3 and 6 were characterized by single-crystal X-ray analyses. They have planar hexacyclic structures where the central atoms present distorted tbp geometries with one nitrogen and two carbon atoms in equatorial positions and two oxygen atoms in apical positions.     

Formation and structural characterization of mercury complexes from Te(R)CH2SiMe3 (R = Ph, CH2SiMe3) and HgCl2

The reaction of HgCl₂ and Te(R)CH₂SiMe₃ [R = CH₂SiMe₃ (1), Ph (2)] in ethanol yielded a mononuclear complex [HgCl₂{Te(R)CH₂SiMe₃}₂] (R = Ph, 3a; R = CH₂SiMe₃, 3b). The recrystallization of 3a or 3b from CH₂Cl₂ produced a dinuclear complex [Hg₂Cl₂(μ-Cl)₂{Te(R)CH₂SiMe₃}₂] (R = Ph, 4a; R = CH₂SiMe₃, 4b). When 3a was dissolved in CH₂Cl₂, the solvent quickly removed, and the solid recrystallized from EtOH, a stable ionic [HgCl{Te(Ph)CH₂SiMe₃}₃]Cl·2EtOH (5a·2EtOH) was obtained. Crystals of [HgCl₂{Te(CH₂SiMe)₂}]·2HgCl₂·CH₂Cl₂ (6b·2HgCl₂·CH₂Cl₂) were obtained from the CH₂Cl₂ solution of 3b upon prolonged standing. The complex formation was monitored by ¹²⁵Te-, and ¹⁹⁹Hg NMR spectroscopy, and the crystal structures of the complexes were determined by single crystal X-ray crystallography.     

Synthesis and structures of some sterically hindered zinc complexes containing 6-membered and rings

Zinc β-diketiminates containing the N,N′-chelating ligand [{N(SiMe₃)C(Ph)}₂CH]⁻ (≡LL⁻) [Zn(LL)(μ-Cl)]₂ (1) and [ZnEt(LL)thf] (2) were prepared from 2ZnCl₂ + [Li(LL)]₂ and ZnEt₂ + H(LL), respectively. The new phenols 2-(N-R-piperazinyl-N′-methyl)-4,6-di-tert-butylphenol [R = Ph (3a), Me (3b)] and 2,2-[μ-N,N′-piperazindiyldimethyl]-bis(4,6-di-tert-butylphenol) (4) were obtained from 2,4-tBu₂C₆H₃OH, (CH₂O)_n and the appropriate piperazine. Zinc phenoxides 5, 7 and 8 were derived from 2ZnEt₂ with 2(3a), 2(3b) and 4, respectively. Controlled methanolysis of 5 furnished the bis(phenoxo)zinc compound Zn[OC₆H₂tBu₂-2,4-{CH₂N(CH₂CH₂)₂NPh}-6]₂ (6). The X-ray structures of the crystalline zinc compounds 1, 2, 5, 6, 7 and 8, are presented; each of 5-8 contains two six-membered rings. The centrosymmetric molecule 1 has a rhomboidal (ZnCl)₂ core with exceptionally different Zn-Cl and Zn-Cl′ bond lengths of 2.248(1) and 2.509(1) Å, respectively. None of 1, 2 or 5-8 was an effective catalyst for the copolymerisation of an oxirane and CO₂.     

Tricarbonylrhenium(I) and manganese(I) complexes of 2-(pyrazolyl)-4-toluidine

A series of tricarbonyl rhenium(I) and manganese(I) complexes of the electroactive 2-(pyrazolyl)-4-toluidine ligand, H(pzAn^Me), has been prepared and characterized including by single crystal X-ray diffraction studies. The reactions between H(pzAn^Me) and M(CO)₅Br afford fac-MBr(CO)₃[H(pzAn^Me)] (M = Mn, 1a; Re, 1b) complexes. The ionic species {fac-M(CH₃CN)(CO)₃[H(pzAn^Me)]}(PF₆) (M = Mn, 2a; Re, 2b) were prepared by metathesis of 1a or 1b with TlPF₆ in acetonitrile. Complexes 1a and 1b partly ionize to {M(CH₃CN)(CO)₃[H(pzAn^Me)]⁺}(Br⁻) in CH₃CN but retain their integrity in less donating solvents such as acetone or CH₂Cl₂. Each of the four metal complexes reacts with (NEt₄)(OH) in CH₃CN to give poorly-soluble crystalline [fac-M(CO)₃(μ-pzAn^Me)]₂ (M = Mn, 3a; Re, 3b). The solid state structures of 3a and 3b are of centrosymmetric dimeric species with bridging amido nitrogens and with pyrazolyls disposed trans- to the central planar M₂N₂ metallacycle. In stark contrast to the diphenylboryl derivatives, Ph₂B(pzAn^Me), none of the tricarbonyl group 7 metal complexes are luminescent.