Concise synthesis of multiply substituted stereodefined cis,cis-2,4-diene-1,6-dials, cis,cis-2,4-diene-1,6-diols and further applications

Reactions of 1,4-dilithio-1,3-dienes with DMF afforded multiply substituted stereodefined cis,cis-2,4-diene-1,6-dials in high yields. Treatment of these 1,6-dials with LiAlH₄ or RLi resulted in the formation of their corresponding 1,6-diols. These bifunctional compounds, cis,cis-2,4-diene-1,6-dials and -1,6-diols are otherwise not readily available. Further reaction of these 1,6-diols with an aldehyde catalyzed by strong acids led to the formation of oxacycles of novel structures.     

Synthesis of cis-3,4-diarylpiperidines and cis-3,4-diaryltetrahydropyrans

Substituted cis-3,4-diarylpiperidines and cis-3,4-diaryltetrahydropyrans are synthesized in modest overall yields starting from 4-aryl-1,2,5,6-tetrahydropyridines and 4-aryl-1,2,5,6-tetrahydropyrans via the following sequence: (1) pinacol-type ring contraction having the combination of m-chloroperoxybenzoic acid and boron trifluoride etherate, (2) Grignard addition with arylmagnesium bromide reagents and followed by boron trifluoride etherate-mediated intramolecular ring-expanded rearrangement, and (3) hydrogenation with hydrogen on 10% palladium-activated carbon. A facile synthesis of 3,4-diarylpyridines was also described by base-induced aromatization.     

Triazolopeptides: chirospecific synthesis and cis/trans prolyl ratios of structural isomers

As cis/trans prolyl isomerization plays a crucial role in various biological processes, peptide mimics capable of modifying the cis/trans Xaa-Pro ratio are of particular interest. A practical approach toward proline derived triazolopeptides employing [3+2] azide-alkyne cycloadditions as the key reaction step and the analysis of their cis/trans prolyl ratios are reported. Structural investigations indicated the adjustability of both the cis-percentage and the conformational stability toward intramolecular H-bonding effects.     

Synthesis and characterization of high cis-polybutadiene: influence of monomer concentration and reaction temperature

This paper reports the study of the dependence of reaction conversion, catalyst activity, polymer microstructure, molecular weight, molecular weight distribution curves and Mooney viscosity on reaction temperature and monomer concentration in the reaction medium used in the synthesis of high cis-polybutadiene. A ternary catalyst system composed by neodymium versatate, trans-butyl chloride and diisobutylaluminum hydride was used in its synthesis. The highest molecular weights were obtained at polymerization temperatures in the range from 70 to 80 °C. The highest content of cis-1,4 repeating units (about 99%) was observed when the polymerization was carried out at the lowest initial monomer concentration (0.56 mol/l).     

Alkyl and dialkylammonium tetrafluoroborate catalyzed cis-trans isomerization of 1,3,5-trimethyl-1,3,5-triphenylcyclotrisiloxane

Alkyl and dialkylammonium tetrafluoroborate promoted cis-trans isomerization of 1,3,5-trimethyl-1,3,5-triphenylcyclotrisiloxane (1) in DMSO-d₆ were studied. The isomerization equilibrium constant K are within the range of 3.74-3.30 from 22 to 47 °C. Thermodynamic parameters of ΔH° and ΔS° for the isomerization were −0.95 kcal/mol and −0.59 cal/mol-K respectively. The isomerization rate is first order in [cis-1] and second order in [R_nNH_4−nBF₄]. Both components of R_nNH_4−n⁺ and BF₄⁻ are essential for the catalytic cis-trans isomerization. The catalytic strength follows the decreasing order of ⁺H₃N(CH₂)₆NH₃⁺>n-C₈H₁₇NH₃⁺>n-C₁₆H₃₃NH₃⁺>Me₃CNH₃⁺>PhCH₂NH₃⁺>Et₂NH₂⁺?Ph₂CHNH₃⁺, Et₃NH⁺. Inversion region was observed in the plot of ln(k_f/T) versus (1/T) with the ceiling located at around 38 °C. The positive activation enthalpy of 9 kcal/mol was estimated at 22-32 °C. The activation enthalpy turns to be slightly negative at T>38 °C.     

Synthesis of methyl (5Z,8Z,10E,12E,14Z)-eicosapentaenoate

The first total synthesis of methyl (5Z,8Z,10E,12E,14Z)-eicosapentaenoate has been achieved in seven steps and in 16% overall yield. The synthesis confirmed the assigned structure of this polyunsaturated natural product.     

Convenient route to dialkyl diselenides from alkyl tosylates. Synthesis of di(cis-myrtanyl) diselenide

A one-step method for the synthesis of dialkyl diselenides, by reaction of alkyl tosylates with sodium diselenide is described. Three variants of the synthesis, using as an example the preparation of optically active di(cis-myrtanyl) diselenide, are compared.     

Indium(III) chloride catalyzed one step synthesis of some new dibenzo(d,f)(1,3)dioxepines and 12H-dibenzo(d,g)(1,3)dioxocin derivatives

In the presence of catalytic amount of indium(III) chloride (10 mol %), 2,2′-dihydroxybiphenyl and bis(2-hydroxyphenyl)methane react quickly, without using any solvent, with ketones or β-keto esters possessing at least one hydrogen atom in α to the ketone-carbonyl group, to afford some new dibenzo(d,f)(1,3)dioxepines and some 12H-dibenzo(d,g)(1,3)dioxocin derivatives, respectively.     

Structure of N,C,N-chelated organotin(IV) fluorides

The set of starting tri-, di- and monoorganotin(IV) halides containing N,C,N-chelating ligand (L^NCN = {1,3-[(CH₃)₂NCH₂]₂C₆H₃}⁻) has been prepared (1-5) and two compounds structurally characterized ([L^NCNPh₂Sn]⁺I₃⁻ (1c), L^NCNSnBr₃ (5)) in the solid state. These compounds were reacted with KF with 18-crown-6, NH₄F or L^CNnBu₂SnF to give derivatives containing fluorine atom(s). Triorganotin(IV) fluorides L^NCNMe₂SnF (2a) and L^NCNnBu₂SnF (3a) revealed monomeric structural arrangement with covalent Sn-F bond both in the coordinating and non-coordinating solvents, except the behaviour of 3a that was ionized in the methanol solution at low temperature. The products of fluorination of L^NCNSnPhCl₂ (4) and 5 were described by NMR in solution as the ionic hypervalent fluorostannates or the oligomeric species reacting with chloroform, methanol or moisture to zwitterionic monomeric stannate L^NCN(H)⁺SnF₄⁻ (5c), which was confirmed by XRD analysis in the solid state.     

Synthesis of N,N-dialkylaminobenzonitriles and halo-(N,N-dialkyl)benzamidines by reaction of halobenzonitriles with lithium amides

3- and 4-N,N-Dialkylaminobenzonitriles and 4-chloro-(N,N-dialkyl)benzamidines were isolated by reacting 4-chlorobenzonitrile with hindered lithium amides under thermodynamic (0 °C) and kinetic control conditions (−78 °C), respectively. As previously reported, a benzyne mechanism seems to be confirmed since N,N-dialkylaminobenzonitriles are formed. Only benzamidines were isolated in fair to high yields at both 0 °C and −78 °C with non-hindered lithium amides. Exploitation and mechanistic rationale of the reaction of different halobenzonitriles are also reported.     

Synthesis, characterization and crystal structures of cyclometallated palladium (II) compounds containing difunctional ligands with [P,P], [As,As], [N,N], [P,As], [P,N] and [P,O] donor atoms

Treatment of the chloro-bridged dinuclear complex [Pd{3,4-(MeO)₂C₆H₂C(H)N(Cy)-C6,N}(μ-Cl)]₂ (1) with homobidentate [P,P], [As,As], [N,N], and heterobidentate [P,As], [P,N] ligands in a 1:1 molar ratio gave the dinuclear complexes [{Pd[3,4-(MeO)₂C₆H₂C(H)N(Cy)-C6,N](Cl)}₂{μ-L}] (L = Ph₂PC₄H₆(NH)CH₂PPh₂ (2); Ph₂As(CH₂)₂AsPh₂ (3); 1,3-(NH₂CH₂)₂C₆H₄ (4); Ph₂P(CH₂)₂AsPh₂ (5); Ph₂P(CH₂)₂NH₂ (6)), with the bidentate ligands bridging the two cyclometallated fragments.The reaction with the homobidentate ligands in a 1:2 molar ratio in the presence of NaClO₄ afforded the mononuclear compounds [[Pd{3,4-(MeO)₂C₆H₂C(H)N(Cy)-C6,N}{L-P,P}][ClO₄] (L = Ph₂PC₄H₆(NH)CH₂PPh₂ (7); (o-Tol)₂P(CH₂)₂P(o-Tol)₂ (8)), [Pd{3,4-(MeO)₂C₆H₂C(H)N(Cy)-C6,N}{Ph₂As(CH₂)₂AsPh₂-As,As}][ClO₄] (9) and [Pd{3,4-(MeO)₂C₆H₂C(H)N(Cy)-C6,N}{L-N,N}][ClO₄] (L = NH₂(CH₂)₃NH₂ (10); NH₂(C₆H₈)CH₂(C₆H₈)NH₂ (11); 1,3-(NH₂CH₂)₂C₆H₄ (12); 1,3-(NH₂)₂C₅H₃N (13); NH₂(C₆H₄)O(C₆H₄)NH₂ (14); NMe₂(CH₂)₂NMe₂ (15)), in which the chloro ligands are absent and the bidentate ligands are chelated to the palladium atom.Reaction of 1 with Ph₂P(CH₂)₂AsPh₂ in 1:2 molar ratio in acetone in the presence of NH₄PF₆ afforded the analogous mononuclear compound [Pd{3,4-(MeO)₂C₆H₂C(H)N(Cy)-C6,N}{Ph₂P(CH₂)₂AsPh₂-P,As}][PF₆] (16); whereas reaction with Ph₂P(CH₂)₃NH₂ gave [Pd{3,4-(MeO)₂C₆H₂C(H)N(Cy)-C6,N}{Ph₂P(CH₂)₃N(CMe₂)-P,N}][PF₆] (17), derived from intermolecular condensation between the aminophosphine and acetone. Condensation of the NH₂ group was precluded by change of solvent, using dichloromethane.Iminophoshines also reacted with 1 in 1:2 molar ratio in acetone to give a new series of mononuclear cyclometallated complexes: [Pd{3,4-(MeO)₂C₆H₂C(H)N(Cy)-C6,N}{L-P,N}][ClO₄] (L = Ph₂PC₆H₄C(H)NCy (20); Ph₂PC₆H₄C(H)NC(CH₃)₃ (21); Ph₂PC₆H₄C(H)NNMe₂ (22); Ph₂PC₆H₄C(H)NNHMe (23); Ph₂PC₆H₄C(H)NNHPh (24)). Analogous complexes with a stable P,O-chelate were obtained using bidentate [P,O] donor ligands: [Pd{3,4-(MeO)₂C₆H₂C(H)N(Cy)-C6,N}{L-P,O}][Cl] (L = 2-(Ph₂P)C₆H₄CHO (25); Ph₂PN(Me)C(O)Me (26)).The crystal structures of compounds 1, 5, 15, 16, 18, 20 have been determined by X-ray crystallography.     

Synthesis and NMR spectra of the syn and anti isomers of substituted cyclobutanes—evidence for steric and spatial hyperconjugative interactions

The syn and anti isomers of cis,cis-tricyclo[5.3.0.0^2,6]dec-3-ene derivatives have been synthesized and their ¹H and ¹³C NMR spectra unequivocally analyzed. Both their structures and their ¹H and ¹³C NMR chemical shifts were calculated by DFT, the latter two calculations employing the GIAO perturbation method. Additionally, calculated NMR shielding values were partitioned into Lewis and non-Lewis contributions from the bonds and lone pairs involved in the molecules by accompanying NBO and NCS analyses. The differences between the syn and anti isomers were evaluated with respect to steric and spatial hyperconjugation interactions.     

Synthesis of N,N-di(arylmethylidene)arylmethanediamines by flash vacuum pyrolysis of arylmethylazides

Flash vacuum pyrolysis of arylmethylazides 7a-d gave 2,4-diazapentadienes 5a-d in high yield (76-92%). The thermal cyclization of 5a-d gave cis-imidazolines 1a-d, further heating or Swern oxidation of 1a-d gave dehydrogenated products, imidazoles 2a-d.     

The stereoselective synthesis of (E)-octafluoro-1,3,5-hexatriene and (3E,5E,7E)-dodecafluoro-1,3,5,7,9-decapentaene

(E)-(1,2-Difluoro-1,2-ethenediyl)bis[tributylstannane], 3, readily undergoes a Pd(PPh₃)₄/CuI-catalyzed cross-coupling reaction with iodotrifluoroethene to yield (E)-octafluoro-1,3,5-hexatriene, 4, in high isomeric purity. (1Z,3E,5Z)-(1,2,3,4,5,6-Hexafluoro-1,3,5-hexenetriyl)bis[tributylstannane], 7, was sequentially prepared from (1Z,3E,5Z)-(1,2,3,4,5,6-hexafluoro-1,3,5-hexenetriyl)bis[triethylsilane], 5, which was prepared via a Pd(PPh₃)₄/CuI-catalyzed cross-coupling reaction of 3 with (E)-1,2-difluoro-1-iodo-2-triethylsilylethene, 6. Pd(PPh₃)₄/CuI cross-coupling of 7 with iodotrifluoroethene gave (3E,5E,7E)-dodecafluoro-1,3,5,7,9-decapentaene, 8.     

Synthesis of N,N-diethyldithiocarbamate functionalized 1,4-polyisoprene, from natural rubber and synthetic 1,4-polyisoprene

N,N-Diethyldithiocarbamate functionnalized 1,4-polyisoprenes were prepared from 1,4-polyisoprenes (natural or synthetic). The syntheses were performed by nucleophilic addition of N,N-diethyldithiocarbamate salts upon oxirane rings of epoxidized units according to a SN2 mechanism with ring opening. Studies on model molecules of epoxidized 1,4-polyisoprene units (1,2-epoxy-1-methylcyclohexane and 4,5-epoxy-4-methyloctane) were previously achieved to develop the procedure. The best yields were obtained at low temperature in polar medium, and more especially in water with sodium N,N-diethyldithiocarbamate (DEDT-Na) as reagent. A diastereospecific addition was noted when reaction was performed in water with DEDT-Na. Afterwards, the developed procedure was successfully generalized to epoxidized synthetic polyisoprenes and epoxidized natural rubber (in THF, then in latex medium). Excellent results were obtained in latex medium with epoxidized natural rubber (ENR) latices. As with the models, a diastereospecific addition of sodium N,N-diethyldithiocarbamate trihydrate onto epoxidized 1,4-polyisoprene units of ENR was observed at the condition to bring the latex medium to pH 8 before introduction of DEDT-Na. Influence of temperature, drc, and DEDT-Na concentration were successively examined to determine the best conditions of the addition on ENR latices.     

Synthesis of trans/cis 4-substituted 3-furyl-2-phenethyltetrahydroisoquinolin-1-ones: conformation of the trans-4-(pyrrolidinylcarbonyl) derivative

The title compounds were synthesized starting from homophthalic anhydride and an imine. The amides obtained showed unexpected values for ³J_3,4 that cannot be used to deduce their configuration and conformation. This problem was resolved for one representative compound (the 4-(pyrrolidinylcarbonyl) derivative) by means of detailed NMR studies, X-ray diffraction and theoretical calculations. The compound has the trans configuration. In the solid state, its conformation is with dipseudoaxial (aa) oriented substituents at positions 3 and 4. In different solvents and in the gas-phase, the majority of the data reveal that the observed value of ³J_3,4 results from an equilibrium of the ee and aa conformers.     

Synthesis and structural characterization of novel ruthenium(II) complexes featuring an N,N,O-scorpionate ligand: A versatile synthetic precursor for open-face scorpionatoruthenium(II) complexes

The syntheses and characterization of novel ruthenium(II) complexes containing bis(3,5-dimethylpyrazol-1-yl)acetato (bdmpza), a new class of scorpionate ligands, are reported herein. [RuCl(bdmpza)(η⁴-1,5-cyclooctadiene)] (1) was found to be a versatile precursor to synthesize a wide range of new ruthenium(II) complexes with the bdmpza ligand. The treatment of 1 with pyridine (py), diphenylphosphinoethane (dppe), 2,2′-bipyridyl (bpy), 1,10-phenanethroline (phen), or bispicolylamine (Hbpica) in refluxing N,N-dimethylformamide resulted in displacement of the 1,5-cyclooctadiene ligand to afford [RuCl(bdmpza)(py)₂] (2), [RuCl(bdmpza)(dppe)] (3), [RuCl(bdmpza)(bpy)] (4), [RuCl(bdmpza)(phen)] (5), and [Ru(bdmpza)(Hbpica)]Cl (6Cl) in good yields, respectively. The structures of 1–4, and 6 were determined by X-ray structure analyses.     

Synthesis and biological activity of a stereoisomeric mixture of the mating hormone of Phytophthora

The first synthesis of a stereoisomeric mixture of hormone α1, the mating hormone of Phytophthora, was achieved, and the synthetic mixture was confirmed to be hormonally active.     

New sesquiterpenes from Inula japonica Thunb. with their inhibitory activities against LPS-induced NO production in RAW264.7 macrophages

Twenty-two new sesquiterpenes were isolated from the aerial parts of Inula japonica Thunb., together with fifteen known ones. Their structures were determined by detailed spectroscopic analysis, X-ray diffraction studies, and modified Mosher method. All 37 compounds were evaluated for the inhibition of LPS-induced nitric oxide (NO) production in RAW264.7 macrophages, and most of isolates significantly inhibited the NO production with IC₅₀ values in the range of 3.5-20 μM. Besides, results obtained in our studies provided a structure-activity relationship that would be used to design anti-inflammatory agents in the future.