Synthesis of (3′R,5′S)-3′-hydroxycotinine using 1,3-dipolar cycloaddition of a nitrone

To synthesize (3′R,5′S)-3′-hydroxycotinine [(+)-1], the main metabolite of nicotine (2), cycloaddition of C-(3-pyridyl)nitrones 3a, 3c, and 15 with (2R)- and (2S)-N-(acryloyl)bornane-10,2-sultam [(2R)- and (2S)-8] was examined. Among them, l-gulose-derived nitrone 15 underwent stereoselective cycloaddition with (2S)-8 to afford cycloadduct 16, which was elaborated to (+)-1.     

Unambiguous detection of 2,4,6-cycloheptatrien-1-ol by NMR spectroscopy and trapping with phenyltriazolinedione

For the first time, the title alcohol 3 was unambiguously detected as a transient intermediate leading to ditropylether (6) in a cation-anion reaction between the tropylium ion (5) and hydroxide ion in an aqueous solution by NMR spectroscopy. It was also found that 6 gives 3 as a transient product in acid-catalyzed disproportionation of 6 into a mixture of tropone (4) and 1,3,5-cycloheptatriene (7) in chloroform containing water. Furthermore the existence of 3 in the latter reaction was confirmed by trapping with 4-phenyl-1,2,4-triazoline-3,5-dione to afford the [4+2]cycloadduct of the norcaradiene form of 3.     

Domino routes to substituted benzoindolizines: tandem reorganization of 1,3-dipolar cycloadducts of nitrones with allenic esters/ketones and alternative cycloaddition-palladium catalyzed cyclization pathway

Reactions of C-(4-oxo-4H[1]benzopyran-3-yl)-N-phenyl nitrones (7) with allenic esters (8a-c) and allenic ketones (18a-d) furnish benzoindolizines (9a-k, 19a-d) in good yields. The formation of benzoindolizines is postulated to involve regioselective addition of 1,3-dipole to C2-C3 π bond of allenic esters/ketones followed by domino transformation of the cycloadducts, which involve an intramolecular aza Diels-Alder reaction in the intermediate C. DFT calculations of various parameters for diene and dienophile components in the proposed intermediate C have revealed that conformational constraints imposed by the alkyl groups (R=Me, Et) favor intramolecular aza-Diels-Alder cycloaddition. An alternative domino route to benzoindolizines (9a,d,g) involving sequential one-pot cycloaddition of azadienes (22a-c) with silyl-enol ether (23) followed by palladium(0)-catalyzed Heck coupling reaction has also been developed. Both these approaches represent novel domino routes for the synthesis of benzoindolizines.     

Solvent-free reactions of N,N′-thiocarbonyldiimidazole with ferrocenylcarbinols

The efficient and simple routes for the synthesis of various ferrocenyl derivatives from ferrocenylcarbinols and N,N′-thiocarbonyldiimidazole (TCDI) are described. It involves grinding the two substrates in a Pyrex tube with a glass rod at room temperature. The reaction of ferrocenylmethanol (1a) provided S,S-bis(ferrocenylmethyl)dithiocarbonate (1b), whose crystal structure and a plausible mechanism for its formation are also reported. The reaction of 1-ferrocenyl-1-phenylmethanol (2a) and 1-ferrocenylbutanol (2b) gave the products 2c and 2d, respectively. The reaction of ω-ferrocenyl alcohols 4-ferrocenylphenol (3a) and 6-ferrocenylhexan-1-ol (3b) yielded the products 3c and 3d, respectively. Reaction of 1,1′-ferrocenedimethanol (3e) afforded 3f in moderate yield, and by contrast, it was not similar to 1b. Reaction of [4-(trifluoromethyl)phenyl]methanol (4a) provided the thiocarbonate 4b in good yield.     

An improved synthesis of 2-(1,2,4-thiadiazol-5-yl)pyridine by interception of an intermediate involved in a competing cyclisation reaction

Reaction of thiopicolinamide with N,N′-dimethylformamide dimethyl acetal leads to the formation of 3-(dimethylamino)-1-methylthioimidazo[1,5-a]pyridine (3). However, the course of the reaction can be diverted to produce the title compound (1) in good yield by timely interception of the intermediate thioacylamidine (2).     

Synthesis and crystal structures of dinuclear zinc complexes with the 1,3-bis(2-pyridylmethyl)acetamidinato ligand

The reaction of an equimolar mixture of N,N′-bis(2-pyridylmethyl)acetamidine (1) and di(tert-butyl)phosphane with dimethylzinc yields dinuclear bis(methylzinc) bis(2-pyridylmethyl)acetamidinate di(tert-butyl)phosphanide (2). A similar protocol allows the preparation of bis(alkylzinc) bis(2-pyridylmethyl)acetamidinate tert-butylamide [zinc-bound methyl (3) or trimethylsilylmethyl group (4)]. The reactions of 3 and 4 with diphenylsilane lead to the formation of insoluble dimeric bis(alkylzinc) N,N′-bis(2-pyridylmethyl)acetamidinate hydrides [zinc-bound methyl (5) or trimethylsilylmethyl group (6)]. These zinc hydrides decompose once dissolved under formation of elemental zinc thus hampering catalytic applications. Molecular structures of [(1)ZnCl₂] as well as of the zinc complexes 2 to 6 are discussed.     

Synthesis and characterization of novel optically active poly(amide-imide)s via direct amidation

N,N′-Pyromelliticdiimido-di-l-methionine (3) was prepared from the reaction of pyromellitic dianhydride (1) with l-methionine (2) in glacial acetic acid and pyridine solution at refluxing temperature. The direct polycondensation reaction of the monomer diimide-diacid (3) with 1,3-phenylenediamine (4a), 1,4-phenylenediamine (4b), 2,6-diaminopyridine (4c), 3,5-diaminopyridine (4d), 4,4′-diaminodiphenylether (4e) and 4,4′-diaminodiphenylsulfone (4f) was carried out in a medium consisting of triphenyl phosphate, N-methyl-2-pyrolidone, pyridine and calcium chloride. The resulting poly(amide-imide)s having inherent viscosities 0.45-0.53 dl g⁻¹ were obtained in high yields and are optically active and thermally stable. All of the above compounds were fully characterized by IR spectroscopy, elemental analyses and specific rotation. Some structural characterization and physical properties of these new optically active poly(amide-imide)s are reported.     

(Fluorosilyl)ethylenediamines and fluorosilyl-1,3-diaza-2-silacyclopentanes

This paper presents the chemistry of ethylenediamines and fluorosilanes. The synthesis of thermally stable monosilyl (1-5)- and bis(fluorosilyl)ethylenediamines (6) is described. Starting with the dilithium salt of ethylenediamine and F₂Si(CMe₃)₂ the five-membered 1,3-diaza-2-silacyclopentane (8) is obtained. The reaction of tetra- and trifluorosilanes with dilithiated bis(silyl)ethylenediamines leads to the formation of 1,3-diaza-2-fluorosilylsilacyclopentanes (9-14). Fluorosilanes substitute 8 in 1 and 3 positions (15-28). A fluorosilyl-bridged five-membered ring (29) is isolated in the reaction of 1-trimethylsilyl-1,3-diaza-2-silacyclopentane, BuLi and MeSiF₃. In the synthesis of N-fluorosilyl-1,3-diaza-2-silacyclopentanes constitutional isomers were formed (30-33). Quantum-chemical calculations support the isomerisation mechanism. An iminosilane with an SiN double bond is the intermediate product of the rearrangement process.Crystal structures of 7, 13, 20 and 23 are reported.     

New phlegmarane-type, cernuane-type, and quinolizidine alkaloids from two species of Lycopodium

Two new phlegmarane-type alkaloids, cermizines A (1) and B (2), three new quinolizidine alkaloids, cermizine C (3) and senepodines G (4) and H (5), and a new C₁₆N₂ type alkaloid consisting of a quinolizidine and a piperidine ring, cermizine D (6), as well as two new cernuane-type alkaloids, cernuine N-oxide (7) and lycocernuine N-oxide (8), have been isolated together with cernuine (9) and lycocernuine (10) from the club moss Lycopodium cernuum and L. chinense. The relative stereochemistry of 1-4 and 6, and the absolute stereochemistry of 5, 7, and 8 were elucidated by combination of NOESY correlations, modified Mosher's method, chemical transformations, and computational methods. Cermizine D (6) might be a biosynthetic intermediate of cernuane-type alkaloids such as 7-10.     

Synthesis, structure, and electrochemical properties of biferrocenes annulated with 1,2-dithiin and 1,2-dithiin 1,1-dioxides

2,2″-Bis(N,N-dimethylaminosulfonyl)-1,1″-biferrocene (6), a precursor of biferrocenes annulated with 1,2-dithiin and 1,2-dithiin 1,1-dioxides, was prepared by a sequence of selective ortho-lithiation and dimerization reaction from N,N-dimethylaminosulfonylferrocene. New biferrocenes annulated with 1,2-dithiin (1) and 1,2-dithiin 1,1-dioxides (2) and (3) were successfully synthesized in satisfactory yields by the reaction of compound 6 with lithium aluminum hydride followed by treatment with chlorotrimethylsilane. The electrochemical properties of the biferrocenes (1)-(3) were furnished by voltammetric studies.     

Highly selective conversion of N-aroyl-α-dehydronaphthylalaninamides into 3,4-dihydrobenzoquinolinone derivatives via photoinduced intermolecular electron transfer

The irradiation of substituted (Z)-N-aroyl-α-dehydronaphthylalaninamides [(Z)-1] in methanol containing triethylamine (TEA) with Pyrex-filtered light was found to give 3,4-dihydrobenzoquinolinone derivatives (2) in high yields along with minor amounts of 4,5-dihydrooxazole derivatives (3). Analysis of the substituent effects on product composition revealed that both the photoreactivity of 1 and the selectivity of 2 are decreased with increasing electron-withdrawing ability of the substituent introduced at the para-position on the N-benzoyl benzene ring. From the analysis of the dependence of the quantum yield for the formation of 2 on the TEA concentration, it was found that back electron transfer occurs efficiently within an (E)-1 anion radical-TEA cation radical pair intermediate.     

Chemo- and diastereoselective control for a flexible approach to (5S,6S)-6-alkyl-5-benzyloxy-2-piperidinones

Chemo- and diastereoselective transformation of the N,O-acetals and their chain tautomers (4/5), readily derived from protected 3-hydroxyglutarimide 1a, was studied. It was uncovered that while the reaction with a combination of boron trifluoride etherate/zinc borohydride led to cyclic products (5S,6S/R)-6-alkyl-5-benzyloxy-2-piperidinones 3/2, and 6 in modest chemo- and diastereoselectivities, the reaction of 4/5 with zinc borohydride led exclusively to the formation of the ring-opening products 6 in excellent anti-diastereoselectivities. On the basis of the latter reaction, a flexible approach to (5S,6S)-6-alkyl-5-benzyloxy-2-piperidinones 3 was disclosed.     

Stereoselective synthesis of 3-substituted tetrahydroisoquinolines from phthalan and chiral N-sulfinylimines

The reaction of the dianionic intermediate [resulting from the reductive opening of phthalan (1) with lithium] with chiral N-tert-butylsulfinyl aldimines 3 in the presence of ZnMe₂ gives, after hydrolysis, N-tert-butylsulfinyl amino alcohols 4 with high diastereoselectivity. Successive treatment of compounds 4 with hydrogen chloride in methanol, thionyl chloride in chloroform and sodium hydroxide yields 3-substituted tetrahydroisoquinolines 6.     

Synthesis, molecular structure, and chemical reactivity of azuleno[1,2-a]acenaphthylene

The azuleno[1,2-a]acenaphthylene (1a) was prepared from 1-pyrrolidinylacenaphthylene (5) and 2H-cyclohepta[b]furan-2-one (6) by the method of the Takase-Yasunami azulene synthesis. Its ¹H and ¹³C NMR spectra indicate that 1a comprises azulene and naphthalene rather than acenaphtylene and heptafulvene in accordance with speculation drawn from a previous study of the DEPE calculations. The solid-state structure of 1a was elucidated by X-ray crystallographical analysis, indicating that 1a is nearly planar and exhibits little bond alternation as seen in the optimized structure at the MB3LYP/6-311G^∗ level of theory. All bond lengths observed by the X-ray analysis are in good agreement within 0.024 Å with those calculated. Under pyrolytic conditions 1a underwent azulene-naphthalene rearrangement to give 9 and 10. The electrophilic substitution of 1a was observed at the 7-position and the second reaction at the 3-position. The cycloaddition reaction of 1a with dimethyl acetylenedicarboxylate (DMAD) yielded the 1:1 cycloadduct with a heptalene skeleton 16a and the 1:2 cycloadduct 19, along with the substitution product 17. The X-ray structural analysis of the cycloadducts 16a and 19 is also described.     

Application of the aza-Wittig reaction to the synthesis of pyrazinothienotriazolopyrimidinones: a new tetracyclic ring system

A simple one-pot and efficient method is described for the synthesis of pyrazinothienopyrimidines 6 by domino processes involving aza-Wittig/intermolecular nucleophilic addition/intramolecular cyclization. A tandem aza-Wittig reaction of phosphazenes 7, derived from 6, with heterocumulenes (isocyanates, carbon disulfide or carbon dioxide) generates the pyrazinothienotriazolopyrimidinones 9, 11 and 12, respectively. Pyrazino[2′,3′:4,5]thieno[3,2-d]-1,2,4-triazolo[1,5-a]pyrimidin-4(3H)-ones 15 and bis(pyrazinothienotriazolopyrimidinones) 17 were synthesized by the intermolecular aza-Wittig reaction of phosphazenes 7 with acyl chlorides or α,ω-dichlorides followed by heterocyclization via imidoyl chloride intermediate 16. Further S-alkylation of 11 and reaction of 6 with phosgeniminium chloride produce 2-alkylthio- and 2-N,N-dimethylaminopyrazinothienotriazolopyrimidinones 13 and 19, respectively.     

Nitrenic reactivity of diazirines

Butyl 3-bromo-3H-diazirine-3-carboxylate (7) and 3-bromo-3-phenyl-3H-diazirine (17) exhibit nitrenic reactivity with phenylmagnesium bromide or tetrabutylammonium cyanide. The formation of several N,N′-disubstituted amidines is attributed to the intermediacy of 1-phenyl or 1-cyano-1H-diazirines possessing a singlet imidoylnitrene character at the N2 atom. Most notably, the reaction of 7 with PhMgBr in diethyl ether affords 2-hydroxy-2,2,N-triphenylacetamidine (9) and 2-methyl-5,5-diphenyl-4-phenylamino-2,5-dihydrooxazole (10) as products derived from nitrene insertion to the ether α-C–H bond.     

Photochemistry of benzene and quinoxaline fused Δ-1,2,3-triazolines and their trapping products

The benzene and quinoxaline fused Δ²-1,2,3-triazolines 1a and 1b were synthesized in good yields using Knoevenagel condensation and intramolecular 1,3-dipolar cycloaddition as two of the key reactions. Photolysis (254 nm) of Δ²-1,2,3-triazoline 1a or 1b in acetonitrile led to the homolytic cleavage of nitrogen that generated diethyl diazomalonate 7, highly reactive intermediates aziridines 8a,b, and isoindoles B. The latter two species subsequently underwent rearrangement to give the nitrogen extrusion products 9a,b, and polymers. Furthermore, the reactive intermediates were trapped by dienophiles to give the corresponding cycloadducts. Subsequent rearrangement of the N-bridged cycloadducts gave N-substituted pyrrolo[3,4-b]quinoxalines 12b and 15b in 6% and 9% yields, respectively. Irradiation of 1a in the presence of fumaronitrile led to the isolation of cycloadduct 16a with retention of stereochemistry. Thermal reaction of 1b gave more nitrogen extruded product 9b (58-63% yield) than that by photolysis (5-23% yield), which implied that zwitterionic intermediate might be involved in the former.     

Synthesis of 3-substituted-4-hydroxyquinoline N-oxides from the Baylis-Hillman adducts of o-nitrobenzaldehydes

The reaction of the Baylis-Hillman adducts 1b-f derived from o-nitrobenzaldehydes in trifluoroacetic acid in the presence of triflic acid (0.2 equiv.) afforded 3-substituted-4-hydroxyquinoline N-oxides 2b-e and 2a in good to moderate yields. The reaction mechanism was evidenced by the experiment with 1f, the Baylis-Hillman adduct of 2-nitrobenzaldehyde N-tosylimine, as the one involving N-hydroxyisoxazoline as the key intermediate.     

Synthesis, IR-, NMR- and X-ray investigations on some novel N-hetaryl-dihydro-pyrazolyl ferrocenes. Study on ferrocenes, part 16

Cyclocondensation of 1-aryl-3-ferrocenyl-2-propen-1-ones (1) with hetaryl hydrazines resulted in N-hetaryl-3-aryl-5-ferrocenyl pyrazolines (3, 4). The analogous 3-aryl-1-ferrocenyl-2-propen-1-ones (5) gave the isomeric N-hetaryl-5-aryl-3-ferrocenyl-pyrazolines (6, 10), but in lower yield. The reaction of aryl-chalcones (7) with 4-hydrazino-phthalazinone led to 3,5-bis-aryl-N-hetaryl-pyrazolines (8) or to the corresponding ene-hydrazones (9). The structure of the new compounds was established by IR, ¹H and ¹³C NMR spectroscopy, including DNOE, HMQC, HMBC and DEPT methods. For compounds 1b, 3b and 8b the stereo structure was elucidated also by X-ray diffraction.     

New synthetic technology for the construction of N-hydroxyindoles and synthesis of nocathiacin I model systems

A new synthetic method providing expedient access to a wide range of polyfunctionalized N-hydroxyindoles (IV) is reported. These unique constructs are assembled by nucleophilic additions to in situ generated α,β-unsaturated nitrones (III) through carbon-carbon and carbon-heteroatom bond formation. The new synthetic technology was applied to the synthesis of nocathiacin I (1) model systems (2 and 3a-c) containing the N-hydroxyindole structural motif.