Asymmetric Induction of Chiral 1,1''''-Bis(oxazolinyl)ferrocenes as Ligands in Metal-Catalyzed Cyclopropanation and Diels-Alder Reactions

Bis(oxazoline) ligands1 have been successfully used in a variety of metal-catalyzed asymmetric reactions, such as cyclopropanation, allylic oxidation reactions, etc; Chiral ferrocene derivatives2 have also been proved as effective ligands in numerous asymmetric reactions, for example, chiral ferrocenylphosphines exhibited high enantioselectivity for the reduction of olefins, Heck reactions and Aldol reactions of aldehydes. These results stimulated us to study the behaviour the bis(oxazoline) …     

壳聚糖希夫碱铜多相催化剂催化苯乙烯环丙烷化反应研究

壳聚糖希夫碱铜催化剂催化苯乙烯环丙烷化反应，得到了非常好的化学收率，同时还得到了17.1%ee和33.3:66.7的顺反比。此外，催化剂重复使用数次仍保持很高的活性。     

Novel chiral dibenzo[a,c]cycloheptadiene bis(oxazoline) and catalytic enantioselective cyclopropanation of styrene

A series of chiral C₂-symmetric bis(oxazoline) ligands containing dibenzo[a,c]cycloheptadiene units were synthesized. The copper complexes, prepared in situ from copper (I)-triflate and the new enantiopure oxazoline ligands, were assessed as chiral catalysts in the enantioselective cyclopropanation of styrene with diazoacetate. Enantioselectivities up to 82 and 62%, respectively, for trans- and cis-2-phenylcyclopropanecarboxylate were observed.     

Asymmetric cyclopropanation catalyzed by C2-symmetric bis-(ephedrine)-Cu(II) complexes

The asymmetric cyclopropanation of styrene with alkyl diazoacetate was performed with a series of Cu(II) complexes of novel chiral ligands, which were derived from substitution of 1,3-dibromopropane, 1,2-dibromoethane, α,α′-dibromo-m-xylene and 2,6–bis(bromomethyl)pyridine with 1R, 2S-(−)-ephedrine. These prepared catalysts shown to be highly active in the enantioselective cyclopropanation with ee higher than 89% under the optimal conditions.     

Catalytic asymmetric Henry reaction using copper(II) chiral tridentate Schiff-base complexes and their polymer-supported complexes

A series of chiral tridentate Schiff-base ligands and their polymer-supported ligands were conveniently prepared and introduced as copper(II) chiral complexes for the asymmetric Henry reaction. The structures of these ligands have been characterized by IR, ¹H NMR, ¹³C NMR and MS. The experimental results showed that the corresponding β-nitro alcohols were obtained in moderate to high yields (up to 98%) with up to 98% ee under mild conditions. The complex catalyst forming from copper(II) polymer-supported ligands could be recycled by a simple filtration and reused 6 times at least with similar good catalytic effect (about 94% yield and 90% ee).     

A positive nonlinear effect in catalytic asymmetric cyclopropanation of styrene with ethyl diazoacetate

The existence of a positive nonlinear effect [(+)-NLE] in the asymmetric cyclopropanation of styrene with ethyl diazoacetate catalysed by a chiral Cu(I)-bisoxazoline complex was observed. This effect can be explained by the possible formation of a catalytically inactive heterochiral meso-complex.     

Selectivity in reactions of allyl diazoacetates as a function of catalyst and ring size from gamma-lactones to macrocyclic lactones

Catalytic reactions of diazoacetates tethered through zero, one, two, and three ethylene glycol units to an allyl group have been investigated for chemoselectivity, diastereoselectivity, and enantioselectivity. Results from cyclopropanation, carbon-hydrogen insertion, and oxonium ylide generation are compared from reactions of achiral and chiral catalysts of copper(I) and dirhodium(II) carboxylates and carboxamidates. Relative to results from intermolecular reactions of ethyl diazoacetate with allyl ethyl ether, intermolecular reactions show a diversity of selectivities including preference for the opposite configurational arrangement from the one preferred in corresponding intermolecular cyclopropanation reactions. Enantioselectivities for cyclopropanation are dependent on the catalyst ligands in a manner that reflects divergent trajectories of the carbon-carbon double bond to the reacting carbene center. Enantioselectivity increases as a function of ring size with chiral copper catalysts, but the reverse occurs with chiral dirhodium(II) carboxamidates. Mechanistic implications, including those related to the conformation of the reacting metal carbene, offer a new dimension to understanding of enantioselectivity in catalytic asymmetric cyclopropanation reactions.     

Asymmetric cyclopropanation catalyzed by copper–Schiff’s base complexes

The asymmetric cyclopropanation of styrene with alkyl diazoacetate were performed with copper complexes of Schiff bases, derived from substituted salicylaldehydes and a new chiral amino alcohol, as the catalysts. The electronic and steric properties, as well as the position of those substituents show obvious effects on the enantioselectivities, and ee higher than 98% were achieved under optimal conditions.     

Asymmetric Cyclopropanation Catalyzed by Four Stereoisomers of a Copper-(Schiff-base) Complex with Double Chiral Centers

Catalytic asymmetric cyclopropanation of diazoacetates with olefins has attracted much attention. Those catalysts containing various metals and optically active ligands have been employed for this reaction1,2. The first catalytic asymmetric cyclopropanation reaction was reported in 1966 by Nozaki et al.3. The author used the copper(II) complex 1 bearing a salicyladimine ligand as catalyst though with a low e.e. value of 6%. Aratani and his coworkers designed the copper-(Schiff-base) comp…     

Catalyst structure and the enantioselective cyclopropanation of alkenes by copper complexes of biaryldiimines: the importance of ligand acceleration

The use of chiral non-racemic biaryl copper(I) complexes in the enantioselective cyclopropanation of a number of olefins with either ethyl or tert-butyl diazoacetate is described. Lack of ligand acceleration and the presence of equilibrium amounts of catalytically active uncomplexed Cu(I) ions account for lowered enantioselectivity when using certain ligands.     

Preparation and application of bisoxazoline ligands with a chiral spirobiindane skeleton for asymmetric cyclopropanation and allylic oxidation

A new type of bisoxazoline ligand 4 (abbreviated as SpiroBOX) containing a chiral spirobiindane scaffold were easily prepared in high yields from enantiomerically pure 1,1′-spirobiindane-7,7′-diol (SPINOL) with 1,1′-spirobiindane-7,7′-dicarboxylic acid as the key intermediate. Ligands 4 were applied to the Cu-catalyzed asymmetric cyclopropanation of styrenes with menthyl diazoacetate and allylic oxidation of cyclic alkenes with tert-butyl perbenzoates. The copper complexes of ligands 4 showed high activities and moderate to good enantioselectivities.     

2-Aryl-5,5-bisoxazolin-2-yl[1,3]dioxanes as solution phase and immobilised ligands for highly enantioselective cyclopropanations

2-Aryl-5,5-bisoxazolin-2-yl[1,3]dioxanes 5, which can be easily prepared in three steps from diethyl bishydroxymethylmalonate, amino alcohol and an aromatic aldehyde, have been used for the copper catalysed asymmetric cyclopropanation of styrene with ethyl diazoacetate in up to 99% ee for the trans-cyclopropane. Grafting onto a bromo-Wang resin produced an immobilised ligand 9 which gave the trans-cyclopropane in 65% ee.     

Binuclear versus mononuclear copper complexes as catalysts for asymmetric cyclopropanation of styrene

A number of (S)-(−)-2-amino-1,1-diaryl-1-propanol compounds have been synthesized. They were used to form the binuclear copper complexes through a spontaneous assembly of the individual components, the β-aminoalcohol, 2-hydroxy-5-methyl-1,3-benzenedialdehyde, and copper acetate monohydrate, in methanol. These binuclear complexes were examined as asymmetric catalysts for cyclopropanation of styrene by ethyl diazoacetate. Moderate improvement in enantioselectivity has been observed for the binuclear versus mononuclear copper complexes. The e.e. values up to 87% for trans and 93% for cis products and the ratio between trans and cis products up to 9:1 have been obtained.     

Electronically tuned chiral ruthenium porphyrins: extremely stable and selective catalysts for asymmetric epoxidation and cyclopropanation

We report the use of three enantiomerically pure and electronically tuned ruthenium carbonyl porphyrin catalysts for the asymmetric cyclopropanation and epoxidation of a variety of olefinic substrates. The D(4)-symmetric ligands carry a methoxy, a methyl or a trifluoromethyl group at the 10-position of each of the 9-[anti-(1,2,3,4,5,6,7,8-octahydro-1,4:5,8-dimethanoanthracene)]-substituents at the meso-positions of the porphyrin. Introduction of a CF(3)-substituent in this remote position resulted in greatly improved catalyst stability, and turnover numbers of up to 7500 were achieved for cyclopropanation, and up to 14,200 for epoxidation, with ee values typically >90 % and approximately equal to 80 %, respectively. In one example, the axial CO ligand at the ruthenium was exchanged for PF(3), resulting in the first chiral ruthenium porphyrin with a PF(3) ligand reported to date. In cyclopropanations with ethyl diazoacetate, the latter catalyst performed exceedingly well, and gave a 95 % ee in the case of 1,1-diphenylethylene as substrate.     

Asymmetric inter- and intramolecular cyclopropanation of alkenes catalyzed by chiral ruthenium porphyrins. Synthesis and crystal structure of a chiral metalloporphyrin carbene complex.

Extensive investigations of asymmetric intermolecular cyclopropanation of terminal alkenes with diazoacetates catalyzed by ruthenium porphyrin [Ru(P*)(CO)(EtOH)] (1, H2P = 5,10,15,20-tetrakis[(1S,4R,5R,8S)-1,2,3,4,5,6,7,8-octahydro-1,4:5,8-dimethanoanthracene-9-yl]porphyrin) and the application of catalyst 1 to asymmetric intramolecular cyclopropanation of allylic or homoallylic diazoacetates are described. The intermolecular cyclopropanation of styrene and its derivatives with ethyl diazoacetate afforded the corresponding cyclopropyl esters in up to 98% ee with high trans/cis ratios of up to 36 and extremely high catalyst turnovers of up to 1.1 x 10(4). Examination of the effects of temperature, diazoacetate, solvent, and substituent in the intermolecular cyclopropanation reveals that (i) both enantioselectivity and trans selectivity increase with decreasing temperature, (ii) sterically encumbered diazoacetates N2CHCO2R, such as R = Bu(t), and donor solvents, such as diethyl ether and tetrahydrofuran, are beneficial to the trans selectivity, and (iii) electron-donating para substituents on styrene accelerate the cyclopropanations, with the log(k(X)/k(H)) vs sigma(+) plot for para-substituted styrenes p-X-C6H4CH=CH2 (X = MeO, Me, Cl, CF3) exhibiting good linearity with a small negative rho(+) value of -0.44 +/- 0.09. In the case of intramolecular cyclopropanation, complex 1 promoted the decomposition of a series of allylic diazoacetates to form the cyclopropyl lactones in up to 85% ee, contributing the first efficient metalloporphyrin catalyst for an asymmetric intramolecular cyclopropanation. Both the inter- and intramolecular cyclopropanations were proposed to proceed via a reactive chiral ruthenium carbene intermediate. The enantioselectivities in these processes were rationalized on the basis of the X-ray crystal structures of closely related stable chiral carbene complexes [Ru(P*)(CPh2)] (2) and [Ru(P*)(C(Ph)CO2CH2CH=CH2)] (3) obtained from reactions of complex 1 with N2CPh2 and N2C(Ph)CO2CH2CH=CH2, respectively.     

Z‐bpy,a New C2‐Symmetric Bipyridine Ligand and Its Application in Enantioselective Copper(I)‐Catalyzed Cyclopropanation of Olefins

A rigid C₂‐symmetric chiral bipyridine ligand Z‐bpy with a triptycene‐like backbone was designed and synthesized from simple chemicals in a scalable route. Using this new ligand, copper(I) catalyzed cyclopropanation of styrenes with commercial ethyl diazoacetate produced various corresponding cyclopropanes in high yields, diastereoselectivity and enantioselectivity up to 97% ee.     

手性铜(Ⅱ)-席夫碱配合物催化苯乙烯不对称环丙烷化反应

Twelve chiral copper(Ⅱ) Schiff base complexes, derived from (R) (+) 2 amino 1,1 diaryl 1 propanol with substituted salicylaldehydes, were examined as a catalyst for asymmetric cyclopropanation of styrene with ethyl diazoacetate. It was found that the substituents at 3 and 5 positions of salicylaldehyde in the ligands had great effects on catalytic activity and enantioselectivity of the catalyst. The complex with strong electron withdrawing group (NO 2) at 5 position and the smallest stereo hinder (H) at 3 position of salicylaldehyde showed highly catalytic activity and enantioselectivity, up to ee =87 4% for trans and ee =82 8% for cis isomers respectively, and the ratio 39/61 of cis to trans isomers was obtained at 40 ℃ with 1,2 dichloroethane as solvent.     

Highly enantioselective cyclopropanation of trisubstituted olefins

A highly efficient asymmetric cyclopropanation of trisubstituted olefins with methyl diazoacetate has been developed in terms of an elaborate modified chiral bisoxazoline/copper complex as a catalyst. A broad scope of substrates is compatible with this catalyst system, including various trisubstituted olefins bearing different aryl-, fused aryl- and alkyl-substituents, providing an easy access to optically active 1,1-dimethyl cyclopropanes in good yields with excellent diastereo- and enantio-selectivity.     

Modular ligands in asymmetric synthesis. Copper-mediated cyclopropanation

The chiral imidazoline/copper catalyst system efficiently mediates asymmetric intermolecular cyclopropanations. Complexes derived from (R,R)- or (S,S)-1,1-diphenylethylenediamine, cyclic ketones, and Cu(I) or Cu(II) triflates were compared. The reaction between (−)-menthyl diazoacetate and 1,1-diphenylethylene affords cyclopropane carboxylates in up to 80% yield and with up to 78% de.     

Highly efficient and enantioselective cyclopropanation of styrene with diazoacetates using a new copper-(Schiff-base) catalyst

A new copper-(Schiff-base) complex, derived from (S)-2-amino-1,1-di(3,5-di-t-butylphenyl)propanol, 2-hydroxy-5-nitrobenzaldehyde and copper acetate monohydrate, was used as an efficient catalyst for the cyclopropanation of styrene with diazoacetates, affording ees of up to 98%.