A boronic acid based intramolecular charge transfer probe for colorimetric detection of hydrogen peroxide

Many oxidative stress related diseases and adverse health conditions have been associated with the negative effects of hydrogen peroxide and other similar reactive oxygen species in human body. Therefore, increasing attention has been attracted to the detection and monitoring of hydrogen peroxide in living organisms and food items. In this work, a simple, inexpensive colorimetric method for the quantitative determination of hydrogen peroxide in aqueous sample is described. This method utilizes the de-protection of aryl boronic acid to yield a strongly colored water-soluble dye, which is capable of absorbing and emitting in the red region of the spectrum. The mechanism is faster in alkaline condition and utilizes the intramolecular charge transfer between strong phenolate donor and TCF acceptor, thus allowing a naked eye detection of hydrogen peroxide within seconds. The method is unaffected by the presence of various salts, metal ions, and other interfering species, and it can provide a limit of detection as low as ~1 ppm in aqueous samples. This unique way of generating a fluorogenic donor-acceptor pair holds a potential of this dye and other related derivatives for understanding the role of hydrogen peroxide in physiology and pathology.     

A colorimetric chemosensor for fast detection of thiols based on intramolecular charge transfer

A TCNQ-based triphenylamine derivative (1) with strong intramolecular charge transfer (ICT) character was designed as a colorimetric sensor for thiols. Upon addition of thiols, the absorption spectrum of sensor 1 in aqueous solution was remarkably changed because the adduct of 1 with thiol decreased its ICT character. Sensor 1 showed highly selective and sensitive sensing ability toward thiols over other analytes. This selectivity could be easily observed by naked eyes, indicating that sensor 1 is a potential colorimetric sensor for thiols.     

Spectral and photophysical properties of intramolecular charge transfer fluorescence probe: 4'-dimethylamino-2,5-dihydroxychalcone

The spectral and photophysical properties of a new intramolecular charge transfer (ICT) probe, namely 4′-dimethylamino-2,5-dihydroxychalcone (DMADHC) were studied in different solvents by using steady-state absorption and emission spectroscopy. Whereas the absorption spectrum undergoes minor change with increasing polarity of the solvents, the fluorescence spectrum experiences a distinct bathochromic shift in the band position and the fluorescence quantum yield increases reaching a maximum before decrease with increasing the solvent polarity. The magnitude of change in the dipole moment was calculated based on the Lippert–Mataga equation. These results give the evidence about the intramolecular charge transfer character in the emitting singlet state of this compound.     

The sensing mechanism of fluoride anion for a novel molecule D2: Desilylation and intramolecular charge transfer

In this work, the sensing mechanism of a new fluoride chemosensor 12‐([tert‐butyldiphenylsilyl]oxy)‐8a,13a‐dihydro‐7H‐benzo[de]benzo[4,5]imidazo[2,1‐a]‐isoquinolin‐7‐one (abbreviated as D2) is investigated using density functional theory (DFT) and time‐dependent DFT (TDDFT) methods. The theoretical electronic spectra (vertical excitation energies and fluorescence peak) reproduced previous experimental results (D. Li et al., Spectrochim. Acta A Mol. Biomol. Spectrosc. 2017 , 185, 173), which confirms the rationality of the theoretical level used in this work. The constructed potential energy curve of the desilylation process suggests that the low barrier could be responsible for the rapid response to fluoride anions. Analyses of the binding energies show that only fluoride anion can be detected by D2 chemosensor in dimethylsulfoxide (DMSO). In view of the excitation process, the strong intramolecular charge transfer (ICT) process of the S₀ → S₁ transition explains the red shift of the absorption peak of the D2 sensor with the addition of fluoride anions. This work not only presents a straightforward sensing mechanism of sensing of the fluoride anion by the D2 chemosensor but should also play an important role in the synthesis and design of fluorescent sensors in future.     

Rational design of a colorimetric and ratiometric fluorescent chemosensor based on intramolecular charge transfer (ICT)

A simple colorimetric and ratiometric fluorescent anion sensor 1, 3,6-dichloro-1,8-dinitrocarbazole, was rationally designed and synthesized on basis of the mechanism of intramolecular charge transfer (ICT). In DMSO solutions of 1, the presence of AcO⁻, F⁻ and H₂PO₄⁻ gave birth to the formation of a 2:1 host-to-guest complex, which was synchronously accompanied by a ‘naked-eye’ color change from light yellow to purple, a red-shift of the absorption spectrum and a blue-shift of the emission spectrum.     

An experimental and computational study on intramolecular charge transfer: a tetrathiafulvalene-fused dipyridophenazine molecule

To study the electronic interactions in donor-acceptor (D-A) ensembles, D and A fragments are coupled in a single molecule. Specifically, a tetrathiafulvalene (TTF)-fused dipyrido[3,2-a:2',3'-c]phenazine (dppz) compound having inherent redox centers has been synthesized and structurally characterized. Its electronic absorption, fluorescence emission, photoinduced intramolecular charge transfer, and electrochemical behavior have been investigated. The observed electronic properties are explained on the basis of density functional theory.     

A fluorescent sensing membrane for iodine based on intramolecular excitation energy transfer of anthryl appended porphyrin

A single anthryl appended meso-tetraphenylporphyrin (TPP) dyad has been synthesized and applied in fluorescence sensing of iodine based on the intramolecular excitation energy transfer. The molecular recognition of the sensor is based on the interaction of iodine with inner anthracene moiety of the dyad, while the signal reporter for the recognition process is the TPP fluorescence quenching. Because the emission spectrum of anthracene is largely overlapped with the Soret band absorption of TPP, intramolecular excitation energy transfer interaction occurs between the donor, anthracene and acceptor, TPP. This energy transfer leads to TPP fluorescence emission by excitation of anthracene. The sensor was constructed by immobilizing the dyad in a plasticized poly(vinyl chloride) (PVC) membrane. The sensing membrane shows higher sensitivity compared to the sensors by using anthracene, TPP, or a mixture of anthracene and TPP as sensing materials. Under the optimum conditions, iodine in a sample solution can be determined from 2.04 to 23.6 mmol·L⁻¹ with a detection limit of 33 nmol·L⁻¹. The sensing membrane shows satisfactory response characteristics including good reproducibility, reversibility and stability, as well as the short response time of less than 60 s. Except for Cr₂O₇²⁻ and MnO₄⁻, other common metal ions and anions in foodstuff do not interfere with iodine determination. The proposed method was applied in the determination of iodine in table salt samples. The results agree well with those obtained by other methods. Supported by the National Outstanding Youth Science Foundation of China (Grant No. 20525518), the National Natural Science Foundation of China (Grant No. 20775005), and the National Natural Science Foundation of Hunan province (Grant No. JJ076021)     

Novel chemosensor for alkaline earth metal ion based on 9-anthryl aromatic amide using a naphthalene as a TICT control site and intramolecular energy transfer donor

Novel fluorescent chemosensors 1 and 2 with two different fluorophores (naphthalene and anthracene) at the both ends of polyether was synthesized. These compounds based on 9-anthryl aromatic amide adopted a naphthalene as a TICT controller and an intramolecular energy transfer source. Compound 1 shows high fluorescence efficiency upon complexation with metal ion, and the fluorescence efficiency of 2 is regulated by metal ionic size.     

基于分子内荧光能量转移的碘聚合膜荧光传感器

合成了基于分子内荧光能量转移的蒽（An）-四苯基卟啉（TPP）双发色团碘荧光探针1．由于An的荧光光谱与TPP的S吸收带具有较好的重叠,供体An与受体TPP之间可以发生有效的分子内荧光能量转移,以An的最大吸收波长作为激发波长时,由于分子内荧光能量转移,受体TPP发出荧光．当碘与探针分子中的识别基团An作用时,导致探针分子的荧光转导基团TPP荧光淬灭．与An、TPP和An＋TPP混合物作敏感材料相比,将探针1固定在PVC膜中制备的敏感膜对碘选择性高、灵敏度好．另外,敏感膜具有很好的重现性、可逆性和稳定性,响应时间小于60S．除Cr2O7^2-和MnO4^-外,食品中常见的无机离子和可能存在的干扰物质不影响碘的测定．在最优条件下,传感器的线性范围为2．04×10^-6-2．36×10^-2mol／L,检出限为3．30×10^-8mol／L．本方法应用于加碘食盐中碘含量的测定,结果满意．     

Fluorescence enhancement by hydroperoxides based on a change in the intramolecular charge transfer character of benzofurazan

Strong fluorescence signals were observed after the reaction of novel reagents with hydroperoxides.     

奈韦拉平与铬天青S的电荷转移反应及其测定

确定了奈韦拉平与铬天青S的电荷转移反应条件,同时建立了测定奈韦拉平的分光光度法。奈韦拉平与铬天青S在水和丙酮混合溶剂中发生电荷转移反应,常温下反应30min后可比色。电荷转移络合物的最大吸收波长是578nm,表观摩尔吸光系数为1.78×104L·mol-1·cm-1。奈韦拉平质量浓度在1～16μg·mL-1范围内服从比耳定律,相关系数为0.9993。当奈韦拉平浓度为6μg·mL-1时,六次测定结果的相对标准偏差为1.61%。测得荷移络合物的组成和稳定常数分别为1∶1和1.73×104。本方法用于测定制剂中奈韦拉平的含量,结果与文献方法一致,回收率在98.0%以上。     

A new signal-on method for the detection of protein based on binding-induced strategy and photoinduced electron transfer between Ag nanoclusters and split G-quadruplex-hemin complexes

Proteins play important roles in biological and cellular processes. The levels of proteins can be useful biomarkers for cellular events or disease diagnosis, thus the method for sensitive and selective detection of proteins is imperative to proteins express, study, and clinical diagnosis. Herein, we report a “signal-on” platform for the assay of protein based on binding-induced strategy and photoinduced electron transfer between Ag nanoclusters and split G-quadruplex-hemin complexes. By using biotin as the affinity ligand, this simple protocol could sensitively detect streptavidin with a detection limit down to 10 pM. With the use of an antibody as the affinity ligand, a method for homogeneous fluorescence detection of Prostate Specific Antigen (PSA) was also proposed with a detection limit of 10 pM. The one-step and wash-free assay showed good selectivity. Its high sensitivity, acceptable accuracy, and satisfactory versatility of analytes led to various applications in bioanalysis.     

Fluorescence energy transfer probes based on the guanine quadruplex formation for the fluorometric detection of potassium ion

Dual-labeled oligonucleotide derivative, FAT-0, carrying 6-carboxyfluorescein (FAM) and 6-carboxy-tetramethylrhodamine (TAMRA) labels at 5′- and 3′-termini of thrombin-binding aptamer (TBA) sequence 5′-GGTTGGTGTGGTTGG-3′ and its derivatives, FAT-n (n = 3, 5, and 7) were designed and synthesized. FAT-n derivatives contained a T_mA spacer (m = 2, 4, and 6, respectively) at 5′-end of TBA sequence. The probes were developed to estimate the spacer effect on FRET efficiency and to identify the best probe for sensing of K⁺. Circular dichroism (CD), UV-vis absorption, and fluorescence studies revealed that all FAT-n probes could form the intramolecular tetraplex structures after binding K⁺. Association constants of particular K⁺/FAT-n complexes were determined using different experimental approaches. Suitability of particular probes for sensitive monitoring of K⁺ in intra- and extracellular conditions was examined and discussed. Calibration graphs of fluorescence ratio were linear in the K⁺ concentration range of 2-10 mM for extracellular conditions showing sensitivity of 1.2% mM⁻¹ K⁺ and for intracellular conditions in the range of 100-200 mM with sensitivity of 0.49% mM⁻¹ K⁺.     

茜素红荷移光度法测定阿魏酸哌嗪

研究了茜素红与阿魏酸哌嗪的显色反应,建立了阿魏酸哌嗪含量测定的分光光度法.在水溶剂中阿魏酸哌嗪与茜素红发生荷移反应生成紫红色的复合物,其最大吸收波长为524nm,表观摩尔吸光系数为1.86×103 L·mol-1·cm-1.阿魏酸哌嗪的浓度在1.60⁴8.0mg·L-1范围内与体系的吸光度呈良好的线性关系,其线性回归方程为A=0.021 07+0.003 93c(mg·L-1,R=0.999 2),方法的检出限为1.19mg·L-1.将此新方法应用于阿魏酸哌嗪片中阿魏酸哌嗪含量的测定,回收率在97.5%48.0mg·L-1范围内与体系的吸光度呈良好的线性关系,其线性回归方程为A=0.021 07+0.003 93c(mg·L-1,R=0.999 2),方法的检出限为1.19mg·L-1.将此新方法应用于阿魏酸哌嗪片中阿魏酸哌嗪含量的测定,回收率在97.5%¹00.9%之间.     

Evaluation of a simple and novel fluorescent anion sensor, 4-quinolone, and modification of the emission color by substitutions based on molecular orbital calculations

4-Quinolone (4-QO) was evaluated as a simple and novel fluorescent anion sensor, and the modification of its emission color was carried out. The series of 4-QO derivatives having molecular orbitals with different energy levels was designed by substitutions at the 6 and 7 positions based on the molecular orbital calculations. All derivatives showed drastic fluorescence enhancements in the presence of F⁻ via the intramolecular charge transfer mechanism, and the successful modification of the emission color was achieved. The anion-induced emission colors of these derivatives as well as their binding affinities for F⁻ could be predicted by ab initio quantum chemical calculations, indicating that the present calculations are useful in designing new anion sensors.     

A fluorescent chemical sensor for Fe based on blocking of intramolecular proton transfer of a quinazolinone derivative

In this paper, 2-(2′-hydroxy-phenyl)-4(3H)-quinazolinone (HPQ), a typical compound that exhibits excited state intramolecular proton transfer (ESIPT) reaction and possesses good photophysical properties, is synthesized and used as fluoroionophore for Fe³⁺ sensitive optochemical sensor. The decrease of fluorescence intensity of HPQ membrane upon the addition of Fe³⁺ was attributed to the blocking of ESIPT reactions of HPQ and quenching its fluorescence. The effect of the composition of the sensing membrane was studied, and experimental conditions were optimized. The sensor shows a linear response toward Fe³⁺ in the concentration range of 7.1 × 10⁻⁷ M to 1.4 × 10⁻⁴ M with a limit of detection of 8.0 × 10⁻⁸ M, and a working pH range from 2.5 to 4.5. It shows excellent selectivity for Fe³⁺ over a large number of cations such as alkali, alkaline earth and transitional metal ions. The proposed sensor is applied to the determination of the content of iron ions in pharmaceutical preparations samples with satisfactory results.     

A novel cyanide chemodosimeter based on trifluoroacetamide benzhydrol-2 as binding motif: importance of substituent positioning on intra-molecular charge transfer

The nucleophilic nature of cyanide is used to develop a simple, sensitive, and highly effective sensor. Azo dye 6a based on 2-(trifluoroacetamide) benzhydrol-2 (2-TFAB) as anions receptor, presents a new way to build molecular color sensors for cyanide in water. The 2-TFAB moiety of the dye 6a is used as receptor group for cyanides and linked directly by dominant reversible covalent bonding over hydrogen bonding, confirmed by the inactivity of the derivative 6b toward cyanides.     

Photophysical studies of dipolar organic dyes that feature a 1,3-cyclohexadiene conjugated linkage: the implication of a twisted intramolecular charge-transfer state on the efficiency of dye-sensitized solar cells

A detailed study of the synthesis and photophysical properties of a new series of dipolar organic photosensitizers that feature a 1,3‐cyclohexadiene moiety integrated into the π‐conjugated structural backbone has been carried out. Dye‐sensitized solar cells (DSSCs) based on these structurally simple dyes have shown appreciable photo‐to‐electrical energy conversion efficiency, with the highest one up to 4.03 %. Solvent‐dependent fluorescence studies along with the observation of dual emission on dye 4 b and single emission on dyes 4 a and 32 suggest that dye 4 b possesses a highly polar emissive excited state located at a lower‐energy position than at the normal emissive excited state. A detailed photophysical investigation in conjunction with computational studies confirmed the twisted intramolecular charge‐transfer (TICT) state to be the lowest emissive excited state for dye 4 b in polar solvents. The relaxation from higher‐charge‐injection excited states to the lowest TICT state renders the back‐electron transfer process a forbidden one and significantly retards the charge recombination to boost the photocurrent. The electrochemical impedance under illumination and transient photovoltage decay studies showed smaller charge resistance and longer electron lifetime in 4 b ‐based DSSC compared to the DSSCs with reference dyes 4 a and 32 , which further illustrates the positive influence of the TICT state on the performance of DSSCs.     

Fluorescent sensor for redox environment: a redox controlled molecular device based on the reversible mercury mediated folded structure formation of oligothymidylate

We report the synthesis of a novel molecular sensor that changes fluorescence emission intensity according to redox environments. The sensor is based on the reversible mercury mediated folded structure formation of oligothymidylates.