Synthesis of new bis-BINOL-2,2′-ethers and bis-H8BINOL-2,2′-ethers evaluation of their Titanium complexes in the asymmetric ethylation of benzaldehyde

The preparation by means of different synthetic paths of a series of bis-BINOL and bis-H₈BINOL ligands is described. The ligands consist of two BINOL or H₈BINOL fragments, joined by diverse linkages through the oxygen at the 2′-position of the arylic fragments. These ligands were applied to the Ti(OⁱPr)₄ catalyzed asymmetric alkylation of benzaldehyde with Et₂Zn. The performance of these catalysts is very sensitive to the nature of the ether linkage. The ligand with a propylene link shows better enantioselectivity (ca. 70%) than those with two or four carbon atoms joining the BINOL fragments. Furthermore, using the propylene link, but replacing (R)-BINOL by (R)-H₈BINOL, a significant improvement in the stereoselectivity of the catalysts was achieved (ca. 80% ee in (R)-1-phenylpropan-1-ol). A cooperative effect was observed between the chirality at the BINOL fragment and that of a (S,S)-4,5-bis(methylene)-2,2-dimethyl-1,3-dioxolane link, derived from tartaric acid. When this chiral link combines with two (S)-BINOL fragments, the alkylation of benzaldehyde in toluene produces 70% ee of (S)-1-phenylpropan-1-ol, while the (R)-BINOL derivative ligand with the same link, in identical conditions, yields only 40% ee of the (R)-alcohol.     

Copper-catalyzed enantioselective conjugate addition of triethylaluminum to 2-cyclopentenone

Bidentate phosphites were prepared starting from BINOL, H₈-BINOL or 3,3′, 5,5′-tetra-tert-butyl-2,2′-biphenol. Utilization of these ligands in the copper-catalyzed enantioselective conjugate addition of triethylaluminum to 2-cyclopentenone afforded 3-ethylcyclopentanone in up to 94.0% ee.     

Facile one-pot synthesis of BINOL- and H8-BINOL-based aryl phosphites and their use in palladium catalysed asymmetric allylation

Novel P-monodentate aryl phosphite ligands have been synthesised in one step from (R)-BINOL, (R)-H₈-BINOL and (R)-H₈-3,3′-dibromo-BINOL. With the new aryl phosphites, up to 86% ee was observed in the asymmetric Pd-catalysed amination of 1,3-diphenyl-2-propenyl acetate with sodium diformylamide. In the enantioselective alkylation of 1,3-diphenyl-2-propenyl acetate with dimethyl malonate, up to 97% enantioselectivity was achieved.     

Structure and spectra of 1,3-dioxanes. microwave spectrum,structural parameters and <Emphasis Type="Italic">ab initio</Emphasis> calculations of 1,3-dioxane

Microwave spectra of the 1,3-dioxane molecule (C₄H₈O₂) with the main isotopic composition and four its isotopomers (¹³C(2)¹²C₃H₈ ¹⁶O₂, ¹³C(4)¹²C₃H₈ ¹⁶O₂, ¹³C(5)¹²C₃H₈ ¹⁶O₂, ¹⁸O(1)¹²C₄H₈ ¹⁶O) are investigated in a frequency range of 28–44 GHz. Rotational transitions of b-and c-types with 2 ≤ J ≤ 5 are identified. Rotational constants, quartic constants of centrifugal distortion, isotope-substituted r _s-and effective r ₀-structures of the molecule ring are determined. Experimental data are compared to the results of quantum chemical calculations of different levels.     

Synthesis of BINOL derived phosphorodithioic acids as new chiral Brønsted acids and an improved synthesis of 3,3′-disubstituted H8-BINOL derivatives

Original phosphorodithioic acid diesters were prepared according to an improved synthesis of 3,3′-disubstituted H₈-BINOL derivatives. In preliminary experiments, these new Brønsted acids were tested as organocatalysts in three reactions. They promoted the Nazarov cyclisation with mixed selectivities, the Mannich reaction with good enantioselectivity and they catalyzed efficiently the alkylation of N-acyliminium with enol silyl ether.     

Enantioselective hydrogenation catalyzed by highly active rhodium complexes of chiral phosphites with atropisomeric moieties

Excellent ee's and extremely high activities are obtained in the rhodium-catalyzed hydrogenation of dimethyl itaconate using simple and readily available H₈-BINOL based monodentate phosphites. The hydrogenation proceeds efficiently even at a substrate concentration of 5.263 mol L⁻¹ and at a substrate to catalyst ratio (S/C) of 40,000 to give the product in 95.1% yield with up to 96.9% ee.     

Versatile acenaphtho[1,2-b]pyrrol-carbonitriles as a new family of heterocycles: diverse SNAr reactions, cytotoxicity and spectral behavior

The diverse reactivity of highly electron-deficient 8-oxo-8H-acenaphtho[1,2-b]pyrrol-9-carbonitrile 1 is attractive for the preparation of derivatives bearing different substituents via S_NAr^H reaction with N, O, S nucleophiles. These derivatives were versatile, possessing potential antitumor activities and displaying tunable fluorescence spectral behavior.     

Intricate 3D lanthanide-organic frameworks with mixed nodes nets

Three lanthanide-organic frameworks formulated as [Yb₂(1,3-pda)₃(H₂O)]_n·nH₂O (1) [La₂(2,5-pydc)₃(H₂O)₂]_n (2) and [La(2,5-pydc)(2,5-Hpydc)(H₂O)₂]_n·nH₂O (3) (H₂1,3-pda=1,3-phenylenediacetic acid, H₂2,5-pydc=pyridine-2,5-dicarboxylic acid) have been synthesized under hydrothermal conditions and characterized by single-crystal X-ray diffraction. Both the frameworks of compounds 1 and 2 exhibit intricate 3D architectures which can be simplified as nets with mixed nodes. Compound 1 presents a very complicated net with five types of nodes comprising intersecting (3,4)-connected and CdSO₄ nets. Compound 2 possesses a (4,4,6)-connected net with (4²8⁴)(4⁴6²)₂(4⁹6⁶)₂ circuit symbol. While compound 3 is a 2D layer based upon carboxyl-bridged La^III chains.     

Excess enthalpies of alkane-1-amines {CnH2n+1NH2, n = 3-8} + methyl methylthiomethyl sulfoxide and +dimethyl sulfoxide at 298.15 K

Excess enthalpies of binary mixtures between each of alkane-1-amines {C_nH_2n+1NH₂, n=3-8} and methyl methylthiomethyl sulfoxide (MMTSO) or dimethyl sulfoxide (DMSO) have been determined at 298.15 K. All mixtures showed positive enthalpy changes over the whole range of mole fractions.The limiting excess partial molar enthalpies of the aliphatic amines, H₁^E,∞, of all the mixtures with MMTSO or DMSO studied were smaller than those of MMTSO or DMSO, H₂^E,∞, respectively. Linear relations are obtained between limiting excess partial molar enthalpies and number of methylene groups.     

Effect of water on BINOL/Ti(OPr)4 solution mixtures: The nature of a catalytic precursor of enantioselective sulfoxidation

The solution mixtures of (R)-BINOL, Ti(OⁱPr)₄ and H₂O in 1:0.5:10 proportion in CCl₄, corresponding to the conditions employed for catalyzing the enantioselective oxidation of sulfides to sulfoxides, contain a single titanium BINOLate species. NMR, CD and MS characterization allowed us to identify this species as (BINOLate)₆Ti₄(μ₃-OH)₄ with tetrahedric symmetry consistent with a known crystallographic structure. By varying sample preparation conditions, some aspects of the catalytic behavior could be rationalized. Using racemic BINOL, several heterochiral species were observed in accord with reported non-linear effects in catalysis.     

Enzyme mimics of spinel-type CoxNi1−xFe2O4 magnetic nanomaterial for eletroctrocatalytic oxidation of hydrogen peroxide

A series of spinel-type Co_xNi_1−xFe₂O₄ (x = 0, 0.2, 0.4, 0.5, 0.6, 0.8, 1.0) magnetic nanomaterials were solvothermally synthesized as enzyme mimics for the eletroctrocatalytic oxidation of H₂O₂. X-ray diffraction and scanning electron microscope were employed to characterize the composition, structure and morphology of the material. The electrochemical properties of spinel-type Co_xNi_1−xFe₂O₄ with different (Co/Ni) molar ratio toward H₂O₂ oxidation were investigated, and the results demonstrated that Co_0.5Ni_0.5Fe₂O₄ modified carbon paste electrode (Co_0.5Ni_0.5Fe₂O₄/CPE) possessed the best electrocatalytic activity for H₂O₂ oxidation. Under optimum conditions, the calibration curve for H₂O₂ determination on Co_0.5Ni_0.5Fe₂O₄/CPE was linear in a wide range of 1.0 × 10⁻⁸–1.0 × 10⁻³ M with low detection limit of 3.0 × 10⁻⁹ M (S/N = 3). The proposed Co_0.5Ni_0.5Fe₂O₄/CPE was also applied to the determination of H₂O₂ in commercial toothpastes with satisfactory results, indicating that Co_xNi_1−xFe₂O₄ is a promising hydrogen peroxidase mimics for the detection of H₂O₂.     

Determination of the enthalpy of fusion of K3TaF8 and K3TaOF6

The areas of the fusion and crystallization peaks of K₃TaF₈ and K₃TaOF₆ have been measured using the DSC mode of the high-temperature calorimeter (SETARAM 1800 K). On the basis of these quantities and the temperature dependence of the used calorimetric method sensitivity, the values of the enthalpy of fusion of K₃TaF₈ at temperature of fusion 1039 K: Δ_fusH_m(K₃TaF₈; 1039 K) = (52 ± 2) kJ mol⁻¹ and of K₃TaOF₆ at temperature of fusion 1055 K: Δ_fusH_m(K₃TaOF₆; 1055 K) = (62 ± 3) kJ mol⁻¹ have been determined.     

Practical and highly enantioselective alkylation of aldehydes catalyzed by a titanium complex of 3-aryl H8-BINOL

A titanium complex derived from 3-(3,5-diphenylphenyl)-H₈-BINOL exhibits high catalytic activity and enantioselectivity in the alkylation of aldehydes. Enantioselectivities comparable to or higher than 20 mol % of the parent H₈-BINOL are obtained with 2 mol %-catalyst loadings. The reaction can be carried out without rigorous exclusion of water.     

Hydrogenation of CO2 Promoted by Silicon-Activated H2S: Origin and Implications

Unlike the usual method of CO_x (x = 1, 2) hydrogenation using H₂ directly, H₂S and HSiSH (silicon-activated H₂S) were selected as alternative hydrogen sources in this study for the CO_x hydrogenation reactions. Our results suggest that it is kinetically infeasible for hydrogen in the form of H₂S to transfer to CO_x at low temperatures. However, when HSiSH is employed instead, the title reaction can be achieved. For this approach, the activation of CO₂ is initiated by its interaction with the HSiSH molecule, a reactive species with both a hydridic H^δ− and protonic H^δ+. These active hydrogens are responsible for the successive C-end and O-end activations of CO₂ and hence the final product (HCOOH). This finding represents a good example of an indirect hydrogen source used in CO₂ hydrogenation through reactivity tuned by silicon incorporation, and thus the underlying mechanism will be valuable for the design of similar reactions.     

Vibrational spectra of cyclooctatetraenyl alkali metal complexes [C8H8M2 (M = Na, K)]: A theoretical study

The cyclooctatetraenyl dianion (C₈H₈²⁻) π-conjugated system forms a stable complex system with alkali and some transition metals. The results of vibrational analysis for C₈H₈M₂ (M = Na, K) complexes were reported here. The geometries of C₈H₈M₂ (M = Na, K) were optimized using ab initio (HF, MP2, CCSD(T)) and DFT (B3LYP) methods with 6-311G** and 6-311++G** basis sets and the harmonic frequencies were obtained. To reproduce and compare with the experimental values the structurally similar molecules C₅H₅M (M = Na, K) and benzene were studied. The scale factors obtained from these systems were applied to predict the experimental frequencies of C₈H₈M₂ (M = Na, K). The force field and vibrational spectra are analyzed and the most probable assignments are proposed for all the fundamentals based on the potential energy distribution.     

NMR relaxation study of the phase transitions and relaxation mechanisms of the alums MCr(SO4)2·12H2O (M=Rb and Cs) single crystals

The physical properties and phase transition mechanisms of MCr(SO₄)₂·12H₂O (M=Rb and Cs) single crystals have been investigated. The phase transition temperatures, NMR spectra, and the spin-lattice relaxation times T₁ of the ⁸⁷Rb and ¹³³Cs nuclei in the two crystals were determined using DSC and FT NMR spectroscopy. The resonance lines and relaxation times of the ⁸⁷Rb and ¹³³Cs nuclei undergo significant changes at the phase transition temperatures. The sudden changes in the splitting of the Rb and Cs resonance lines are attributed to changes in the local symmetry of their sites, and the changes in the temperature dependences of T₁ are related to variations in the symmetry of the octahedra of water molecules surrounding Rb⁺ and Cs⁺. We also compared these ⁸⁷Rb and ¹³³Cs NMR results with those obtained for the trivalent cations Cr and Al in MCr(SO₄)₂·12H₂O and MAl(SO₄)₂·12H₂O crystals.     

Sol-gel synthesis of K3InF6 and structural characterization of K2InC10O10H6F9, K3InC12O14H4F18 and K3InC12O12F18

K₃InF₆ is synthesized by a sol-gel route starting from indium and potassium acetates dissolved in isopropanol in the stoichiometry 1:3, with trifluoroacetic acid as fluorinating agent. The crystal structures of the organic precursors were solved by X-ray diffraction methods on single crystals. Three organic compounds were isolated and identified: K₂InC₁₀O₁₀H₆F₉, K₃InC₁₂O₁₄H₄F₁₈ and K₃InC₁₂O₁₂F₁₈. The first one, deficient in potassium in comparison with the initial stoichiometry, is unstable. In its crystal structure, acetate as well as trifluoroacetate anions are coordinated to the indium atom. The two other precursors are obtained, respectively, by quick and slow evaporation of the solution. They correspond to the final organic compounds, which give K₃InF₆ by decomposition at high temperature. The crystal structure of K₃InC₁₂O₁₄H₄F₁₈ is characterized by complex anions [In(CF₃COO)₄(OH_x)₂]^(5−2x)− and isolated [CF₃COOH_2−x]^(x−1)− molecules with x=2 or 1, surrounded by K⁺ cations. The crystal structure of K₃InC₁₂O₁₂F₁₈ is only constituted by complex anions [In(CF₃COO)₆]³⁻ and K⁺ cations. For all these compounds, potassium cations ensure only the electroneutrality of the structure. IR spectra of K₂InC₁₀O₁₀H₆F₉ and K₃InC₁₂O₁₂F₁₈ were also performed at room temperature on pulverized crystals.     

Fluorometric method for the determination of hydrogen peroxide and glucose with Fe3O4 as catalyst

In this paper, we utilized the instinct peroxidase-like property of Fe₃O₄ magnetic nanoparticles (MNPs) to establish a new fluorometric method for determination of hydrogen peroxide and glucose. In the presence of Fe₃O₄ MNPs as peroxidase mimetic catalyst, H₂O₂ was decomposed into radical that could quench the fluorescence of CdTe QDs more efficiently and rapidly. Then the oxidization of glucose by glucose oxidase was coupled with the fluorescence quenching of CdTe QDs by H₂O₂ producer with Fe₃O₄ MNPs catalyst, which can be used to detect glucose. Under the optimal reaction conditions, a linear correlation was established between fluorescence intensity ratio I₀/I and concentration of H₂O₂ from 1.8 × 10⁻⁷ to 9 × 10⁻⁴ mol/L with a detection limit of 1.8 × 10⁻⁸ mol/L. And a linear correlation was established between fluorescence intensity ratio I₀/I and concentration of glucose from 1.6 × 10⁻⁶ to 1.6 × 10⁻⁴ mol/L with a detection limit of 1.0 × 10⁻⁶ mol/L. The proposed method was applied to the determination of glucose in human serum samples with satisfactory results.     

Tribochemistry and kinetics of Al2(SO4)3·xH2O decomposition

The thermal decomposition of tribochemically activated Al₂(SO₄)₃·xH₂O was studied by TG, DTA and EMF methods. For some of the intermediate solids, X-ray diffraction and IR-spectroscopy were applied to learn more about the reaction mechanism. Thermal and EMF studies confirmed that, even after mechanical activation of Al₂(SO₄)₃·xH₂O, Al₂O(SO₄)₂ is formed as an intermediate. Isothermal kinetic experiments demonstrated that the thermochemical sulphurization of inactivated Al₂(SO₄)₃·xH₂O has an activation energy of 102.2 kJ·mol^?1 in the temperature range 850–890 K. The activation energy for activated Al₂(SO₄)₃·xH₂O in the range 850–890 K is 55.0 kJ·mol^?1. The time of thermal decomposition is almost halved when Al₂(SO₄)₃·xH₂O is activated mechanically. The results permit conclusions concerning the efficiency of the tribochemical activation of Al₂(SO₄)₃·xH₂O and the chemical and kinetic mechanisms of the desulphurization process.     

Metal-organic chains constructed from pre-organized N2S2 donor ligands

Three new N₂S₂ donor ligands 1,1′-((2-(2-(phenylthio)phenylthio)phenyl)methylene)bis(3,5-R-1H-pyrazole), R = H (L^H), R = Me (L^Me), R = i-Pr (L^i-Pr) have been prepared and characterized. These bifunctional ligands incorporate two distinct chelate donor systems, by virtue of the presence of bispyrazole and bisthioether functions. The preferred conformation of these ligands is such that the N₂ and S₂ donor moieties may be oriented in opposite directions, thus favoring the formation of molecular chains when treated with AgBF₄. The X-ray structures of Ag(I) complexes show that, depending on the steric hindrance present on the pyrazole rings, these ligands behave as κ⁴-SSNN-μ bridging tetradentate (when R = H), or κ³-SNN-μ bridging tridentate (when R = Me, i-Pr). Interestingly, [Ag(L^H)]BF₄ crystallizes in the chiral space group P4₁, with the molecular chain that is folded around the 4₁ screw axis.