Oxidative addition of N-halosuccinimides to palladium(0): the discovery of neutral palladium(II) imidate complexes, which enhance Stille coupling of allylic and benzylic halides

The Stille coupling of organostannanes and organohalides, mediated by air and moisture stable palladium(II) phosphine complexes containing succinimide or phthalimide (imidate) ligands, has been investigated. An efficient synthetic route to several palladium(II) complexes containing succinimide and phthalimide ligands, has been developed. cis-Bromobis(triphenylphosphine)(N-succinimide)palladium(II) [(Ph₃P)₂Pd(N-Succ)Br] is shown to mediate the Stille coupling of allylic and benzylic halides with alkenyl, aryl and allyl stannanes. In competition experiments between 4-nitrobromobenzene and benzyl bromide with a cis-stannylvinyl ester, (Ph₃P)₂Pd(N-Succ)Br preferentially cross-couples benzyl bromide, whereas with other commonly employed precatalysts 4-nitrobromobenzene undergoes preferential cross-coupling. Furthermore, preferential reaction of deactivated benzyl bromides over activated benzyl bromides is observed for the first time. The type of halide and presence of a succinimide ligand are essential for effective Stille coupling. The type of phosphine ligand is also shown to alter the catalytic activity of palladium(II) succinimide complexes.     

A novel ditopic ring-expanded N-heterocyclic carbene ligand-assisted Suzuki-Miyaura coupling reaction in aqueous media

A series of seven-membered ditopic ring-expanded N-heterocyclic carbene (dre-NHC) precursors, bearing sterically demanding and electron-rich aryl groups, were synthesised in moderate yields via the reaction of 1,2,4,5-tetrakis(bromomethyl)benzene with the corresponding N,N′-diarylformamidines in the presence of K₂CO₃ in acetonitrile under an air atmosphere. All new compounds were characterised by HRMS, NMR spectroscopy, and microanalysis, as well as X-ray crystallography for compound 1c. The development of an efficient catalytic system for the Suzuki-Miyaura coupling reaction of aryl chlorides with various boronic acids was also investigated using the in situ generated dre-NHC ligands.     

C-S bond formation catalyzed by N-heterocylic carbene palladium phosphine complexes

N-Heterocyclic carbenes (NHCs) are known to be useful ligands for palladium-complex catalysis. It was found that [(NHC)Pd(PPh₃)Cl₂] is an effective pre-catalyst in Pd-catalyzed C-S cross coupling reactions to produce the functionalized sulfides in excellent yields. The turn over frequency (TOF) for the coupling of p-CH₃C₆H₄Br with p-CH₃C₆H₄SH reaches to 6.25 (mol of product) (mole of catalyst)⁻¹ h⁻¹.     

Iron/copper co-catalyzed highly selective arylation of sulfinamides with aryl iodides

In the present study, an inexpensive but efficient Iron(III) and Copper(II) co-catalyst without ligands catalyzed arylation of sulfinamides with aryl iodide was primarily reported. In brief, in the presence of Fe(NO₃)₃·9H₂O, CuO and K₃PO₄, the highly selective C–N cross coupling of several sulfinamides and aryl iodides was achieved in high chemical yield, while the aryl chlorides and bromides could not yield coupling products. It is noteworthy that through the arylation of chiral tert-butanesulfinamide with aryl iodides, N-aryl tert-butanesulfinamides are provided without racemization, even in gram-scale. The possible mechanism was that This oxidative addition process between copper catalyst and aryl-iodides might be significantly accelerated by active Fe(III) species. Moreover, using this synthetic method, a facile and efficient access was developed for the derivatives of N-phenyl sulfinamides, which might help to develop new drug molecules and material chemicals.     

Structures of four types of novel high-valent manganese complexes obtained by the reactions of KMnO4 with tridentate Schiff base ligands

X-ray structure analysis revealed that four types of novel manganese complexes, Mn^IV(N-EtO-sal)₂, Mn^III(N-PhO-sal)(L), [Mn^IV(5,6-Benzo-L)₂(μ-O)]₂ and Mn^III(L-4-Me)₃ have been found to be obtained by the reactions of KMnO₄ with various tridentate Schiff base ligands (N-EtOH-salH, N-PhOH-salH and its derivatives) in dry MeCN, where N-EtOH-salH, N-PhOH-salH, LH, 5,6-Benzo-LH and L-4-MeH denote N-2-hydroxyethyl-salicylideneamine, N-2-hydroxyphenyl-salicylideneamine, 2-(2-hydroxyphenyl)-benzoxazole 2-(2-hydroxynaphthyl)-benzoxazole and 2-(2-hydroxyphenyl)-5-methylbenzoxazole, respectively. The reactions of KMnO₄ and N-PhOH-salH and its derivatives have especially been found to afford benzoxazole derivatives which may be formed by intramolecular oxidative coupling between the phenolic oxygen atom of aminophenol moiety and the carbon atom of imine moiety.     

A study on the development of CVD precursors V - syntheses and characterization of new N-alkoxy-β-ketoiminate complexes of titanium

The synthesis and characterization of various new titanium N-alkoxy-β-ketoiminate complexes are reported. Reactions between N-alkoxy-β-ketoimine ligands and Ti(O-iPr)₄ resulted in dimeric [Ti(O-iPr)₂(N-alkoxy-β-ketoiminate)]₂ complexes or monomeric [Ti(N-alkoxy-β-ketoiminate)₂] ones depending on the amount of ligands. Terdentate N-alkoxy-β-ketoiminate ligands do not prevent dimer complexes from undergoing disproportional rearrangement to produce Ti(O-iPr)₄ and [Ti(N-alkoxy-β-ketoiminate)₂]. The mechanism of this behavior is too complicated but it may include the dissociation and recoordination of ligands. Crystal structures of [Ti(N-alkoxy-β-ketoiminate)₂] (MeC(O)CHC(Me)NC(Et)CH₂O (3f) and t-BuC(O)CHC(Me)NCH₂CH(Me)O (3k)) show that these are distorted octahedron and β-ketoiminate ligands appear to coordinate as a β-imino enolate. Two terdentate β-ketoiminate ligands coordinate meridionally and they are perpendicular to each other. Thermal characteristics of monomeric and dimeric titanium complexes were determined by TGA and DSC and these are reasonably volatile as potential precursors of TiO₂ thin films.     

Pd2dba3/P(i-BuNCH2CH2)3N: a highly efficient catalyst for the one-pot synthesis of trans-4-N,N-diarylaminostilbenes and N,N-diarylaminostyrenes

A Pd₂dba₃/P(i-BuNCH₂CH₂)₃N catalyzed one-pot synthesis of unsymmetrically substituted trans-4-N,N-diarylaminostilbenes and both symmetrically and unsymmetrically substituted N,N-diarylaminostyrene derivatives is reported. The procedure involves two or more palladium catalyzed sequential coupling reactions (an amination and an inter-molecular Heck reaction) in one-pot using the same catalyst system with two different aryl halides, including aryl chlorides and hetero aryl halides as the coupling partners.     

N,N′,N″-1,4,7-Triazacyclononane with pendant alkyne arms: Crystal structures of [CuL2′][PF6]2, [NiL2′][ClO4]2 and CuL″Cl2 (L′=N-(4-but-2-yne)-1,4,7-triazacyclononane,L″=N-(5-pent-2-yne)-1,4,7-triazacyclononane)

We report the synthesis of a series of macrocyclic ligands based on N,N′,N″-1,4,7-triazacyclononane with pendant alkyne arms. N,N′,N″-tris-(3-prop-1-yne)-1,4,7-triazacyclononane (L) has three pendant alkyne arms while N-(4-but-2-yne)1,4,7-triazacyclononane (L′) and N-(5-pent-2-yne)-1,4,7-triazacyclononane (L″) each have a single pendant arm. The ligands form coordination complexes with Cu(II), Ni(II), Co(II) and Mo(0). The crystal structures of [CuL₂′][PF₆]₂, [NiL₂′][ClO₄]₂ and CuL″Cl₂ are presented and discussed.     

From neutral iminophosphoranes to multianionic phosphazenates. The coordination chemistry of imino-aza-P(V) ligands

This review deals with the chemistry and coordination behaviour of imino-aza phosphorus(V) ligands focussing on s- and p-block as well as Group 11 and 12 metal complexes. Imino phosphorus(V) ligands contain one or more terminal RNP-units, which include iminophosphoranes R₃PNR′, monoanionic diiminophosphinates [R₂P(NR′)₂]⁻, dianionic triiminophosphonates [RP(NR′)₃]²⁻ and trianionic tetraiminophosphates [P(NR′)₄]³⁻. Aza-phosphorus(V) ligands feature bridging PNP units, which include cyclic and polymeric phosphazenes [R₂PN]_n. Imino-aza- phosphorus(V) ligands containing both imino and aza functions include linear diiminodiphosphazenates [N{R₂P(NR′)₂}₂]⁻ and multianionic poly(imino) cyclophosphazeantes such as [N₄{RP(NR′)}₄]⁴⁻ and [N₃{P(NR′)₂}₃]⁶⁻. Imino-aza phosphorus(V) ligands are assembled of three basic building blocks: the cationic tetravalent phosphonium centre (P), the anionic divalent amido function (N) and the terminally arranged R-group. The overall negative charge Z of the resulting ligand system is equal to the difference between the number of P and the number of N-centres: Z=n(P)n(N). Imino-aza phosphorus(V) ligands are electron rich N-donor ligands which co-ordinate via both N(imino) and N(aza) functions and have been applied in numerous metal complexes in order to stabilise low coordination numbers, unusual oxidation states and bonding modes or serve as ligands in homogeneous catalysis. The R-group provides both steric bulk and solubility in non-polar solvents. Multianionic phosphazenates feature a polydentate ligand surface, which facilitates an extremely high metal load. PN units of iminophosphoranes and phosphazenes have acceptor properties and enhance the acidity of α-alkyl and ortho-aryl protons. Deprotonation of P-alkyl and P-aryl iminophosphoranes give ligand systems featuring C,N chelating sites, which are also discussed.     

Palladium(II)-catalyzed Suzuki–Miyaura reactions of arylboronic acid with aryl halide in water in the presence of 4-(benzylthio)-N,N,N-trimethybenzenammonium chloride

This work reported that Suzuki–Miyaura coupling reactions of arylboronic acid with aryl bromide or iodides were mediated by Pd(OAc)₂ and 4-(benzylthio)-N,N,N-trimethylbenzenammonium chloride in the presence of Na₂CO₃ in water under the mild conditions. The corresponding Suzuki–Miyaura coupling products were obtained in good to excellent yields.     

Concise synthesis of quinazoline alkaloids, luotonins A and B, and rutaecarpine

The total synthesis of luotonin A was achieved in excellent yield by using a Pd-assisted biaryl coupling reaction of N-(bromoquinolinyl)methylquinazolinone with Cy₃P and KOAc. The successive treatment of luotonin A with NBS and aq. AgNO₃ gave luotonin B in good yield. Although the Pd-assisted coupling reaction of N-(2-bromoindolyl)ethylquinazolinone with Cy₃P and KOAc yielded rutaecarpine in poor yield, N-acetate under the same reaction conditions yielded the desired rutaecarpine directly in excellent yield.     

The influence of N-alkylation and chain length in the coordination ability of diamines towards silver(I) in dimethylsulfoxide

The thermodynamic functions for the complexation of Ag(I) by the following diamines: N,N-dimethyldiethylenediamine (N,N-dmen), N,N-dimethyl-1,3-propanediamine (N,N-dmtn) and N,N,N′,N′-tetramethyl-1,3-propanediamine (tmtn) have been determined in dimethylsulfoxide (dmso) by potentiometric and calorimetric techniques at 298 K and 0.1 mol dm⁻³ ionic strength (NEt₄ClO₄). Only mononuclear complexes are formed (AgL_j ⁺, j=1, 2) where the ligands act as monodentate or chelate agents. All the complexes are enthalpy stabilized whereas the entropy changes counteract the complexation. The different basicities and steric requirements of both the ligands and complexes formed together with the size of the chelate rings are taken into account to discuss the results presented here.     

Selective coupling of carbon dioxide and epoxystyrene via salicylaldimine-, thiophenaldimine-, and quinolinaldimine-iron(II), iron(III), chromium(III), and cobalt(III)/Lewis base catalysts

A series of chromium(III)-, cobalt(III)-, and iron(III)-based complexes of the general formula [(N∩O)₂MCl] (1–7) (N∩O: N-salicylidene(R)amine, R = 1-naphthyl or cyclohexyl) have been applied as catalysts for the coupling reaction of carbon dioxide and epoxystyrene (styrene oxide) in the presence of tetrabutylammonium bromide (Bu₄NBr) as a cocatalyst. The reactions were carried out under relatively low pressure and solvent-free conditions. In addition, iron complexes (8–10) containing the ligands, N′-(thiophene-2-methylene)benzene-1,2-diamine, (8), N′-(quinoline-2-methylene)benzene-1,2-diamine (9), and sodium N-(4-sulfonato-salicylidene)-1,2-phenylenediamine (10) were also utilized for the catalytic reaction. The influence of metal center, ligand, temperature, and reaction time on the coupling reaction was investigated. The catalyst systems proved to be selective in the coupling reaction of CO₂ and styrene oxide, resulting in cyclic styrene carbonate. In general, the iron(III)- and cobalt(III)-based catalysts bearing the aromatic 1-naphthyl terminal groups showed the highest catalytic activity under similar reaction conditions.     

Étude de la complexation des lanthanides trivalents par les six isomères de l'acide diaminocyclohexane-tétraacétique : Partie 3. Relation entre les Constantes d'Acidité et la Structure Moleculaire des Chélatants

(Study of the complexation of trivalent lanthanides by the six isomers of diaminocyclohexanetetraacetic acid. Part 3. Relationship between the acidity constants and the molecular structure of the ligands.)Potentiometric measurements of the acidity constants of the six isomers of diaminocyclohexane-N,N,N′,N′-tetraacetic acid (DCTA) are reported for an ionic strength of 1 mol l^?1 (KCl) at 25°C. The values of the two constants K_a3 and K_a4 are correlated with the maximum N—N distance for each ligand. Ethylenediamine-N,N,N′,N′-tetraacetic acid (EDTA) and some homologous ligands, including specially synthesized, 1,8-diaminooctane-N,N,N′,N′-tetraacetic acid and 1,10-diaminodecane-N,N,N′,N′-tetraacetic acid, are studied under the same conditions. It is proved that there is a relationship between the molecular structure and the affinity for protons.     

A new series of potentially hexadentate ligands derived from 2,2′-bipyridine

Reaction of 2,2′-bipyridine-6-carboxaldehyde with the appropriate aliphatic diamine in MeOH and subsequent reduction with NaBH₄ gives the new, potentially hexadentate, ligands N,N′-bis(2,2′-bipyridin-6-ylmethyl)ethane-1,2-diamine (bmet), N,N′-bis(2,2′-bipyridin-6-ylmethyl)propane-1,3-diamine (bmpp) and N,N′-bis(2,2′-bipyridin-6-ylmethyl)hexane-1,6-diamine (bmhx). The syntheses and characterisation of these ligands are reported; the ligands are isolated as the hydrochloride salts, with purification effected by either recrystallisation or cation exchange chromatography. [Co(bmet)](ClO₄)₃ · H₂O is obtained on reaction of bmet · 4.25HCl · 2.5H₂O with Na₃[Co(O₂CO)₃] · 3H₂O, and X-ray structural analysis shows this to have a pair of very short Co–N bonds. The synthesis and characterisation of the first coordination complex containing 6-(aminomethyl)-2,2′-bipyridine (amb) is also described.     

The influence of substituents (R) at the C carbon on bonding properties of thiosemicarbazones {RC(H)N-NH–C(S)–NH2} in palladium(II) complexes

Reactions of the trans-PdCl₂(PPh₃)₂ precursor with furan-2-carbaldehyde thiosemicarbazone (Hftsc) and thiophene-2-carbaldehyde thiosemicarbazone (Httsc), in 1:1 molar ratios in the presence of Et₃N base, removed one Cl and one PPh₃ group from the Pd^II center, and yielded the complexes [Pd(η²-N³,S-ftsc)(PPh₃)Cl] (1) and [Pd(η²-N³,S-ttsc)(PPh₃)Cl] (2), respectively. However, when a 1:2 molar ratio (M:L) was used, both Cl and PPh₃ ligands were removed, yielding the complexes trans-[Pd(η²-N³,S-ftsc)₂] (3) and trans-[Pd(η²-N³,S-ttsc)₂] (4). Complexes 1–4 have been characterized with the help of analytical data, spectroscopic techniques (IR, ¹H and ³¹P NMR) and single crystal X-ray crystallography. The thiosemicarbazone ligands behave as uninegative N³,S-chelating ligands in complexes 1–4. In contrast, pyrrole-2-carbaldehyde thiosemicarbazone (H₂ptsc) and salicylaldehyde thiosemicarbazone (H₂stsc) invariably formed the complexes [Pd(η³-N⁴,N³,S-ptsc)(PPh₃)] (5) and [Pd(η³–O, N³,S-stsc)(PPh₃)] (6), respectively, and the ligands acted as binegative tridentate donors (N⁴, N³, S, 5; O, N³, S, 6).     

(N,N) vs. (N,S) chelation of palladium in asymmetric allylic substitution using bis(thiazoline) ligands: A theoretical and experimental study

New thiazoline-containing ligands including non-symmetric bis(thiazolines) and oxazoline-thiazolines were synthesized and then compared to C₂-symmetric bis(thiazolines) in the palladium-catalyzed allylic substitution. The experimental results obtained in this study support the hypothesis of a competition between the (N,N) and the (N,S) palladium chelation, when sterically hindered bis(thiazolines) are used as ligands. A quantum chemical study performed on the Pd-complexes derived from three selected ligands, two C₂-symmetric bis(thiazolines) and one oxazoline-thiazoline, also supports this hypothesis.     

Synthesis,structural characterization,electrochemical studies and DFT calculations on nickel(II) complexes of <Emphasis Type="Italic">N</Emphasis>-picolinoyl-<Emphasis Type="Italic">N</Emphasis>′-benzothioylhydrazide and 5-(pyridine-4-yl)-2H-1,2,4-triazole-3-thione

Two Ni(II) complexes, [Ni(pbth)₂] and [Ni(ptt)₂(en)₂] {Hpbth = N-picolinoyl-N′-benzothioylhydrazide, Hptt = 5-(pyridine-4-yl)-2H-1,2,4-triazole-3-thione} have been synthesized and characterized by physico-chemical and spectroscopic methods. [Ni(pbth)₂] contains a pair of N-picolinoyl-N′-benzothioylhydrazide ligands coordinated via their thione sulfur, pyridyl nitrogen and hydrazinic nitrogen atoms, forming two C₂N₂Ni and two CSN₂Ni five-membered chelate rings. The intermediate compound 1-isonicotinoyl-3-thiosemicarbazide is converted to 5-(pyridine-4-yl)-2H-1,2,4-triazole-3-thione in the presence of ethanolic NaOH, giving the complex [Ni(ptt)₂(en)₂] in which the ptt ligands coordinate through their triazole ring nitrogen atoms, while four more nitrogens from two ethylenediamine ligands complete the octahedral structure. The crystal structures of the complexes involve various types of intermolecular extended hydrogen bonds, forming supramolecular frameworks. Cyclic voltammetry studies of both complexes show quasi-reversible redox behavior. Density Functional Theory electronic structure calculations corroborate our experimental findings.     

Cadmium coordination polymers based on biimidazole and bibenzimidazole: Syntheses,crystal structures and fluorescent properties

Three new Cd^II complexes with two analogous ligands of 2,2′-biimidazole (H₂biim) and 2,2′-bibenzimidazole (H₂bbim), have been synthesized and characterized by elemental analyses, IR spectroscopy as well as single crystal X-ray diffraction. The results reveal that the structures of the complexes range from one-dimensional (1D) chains in [Cd(H₂biim)(N₃)₂]_n (1) to two-dimensional (2D) layer in [Cd(bbim)_0.5(Hbbim)]_n (2) and three-dimensional (3D) network in [Cd₃(biim)₂(Hbiim)(N₃)]_n (3), with various modes of these ligands, which is tuned by different polarity of solvents and pH values. The fluorescent spectra of these complexes and ligands have been also investigated in the solid state at room temperature.