Pd/C催化剂在乙炔选择加氢反应中的催化性能：载体效应

Pd/C catalysts were prepared by deposited Pd nanoparticles (NPs) on different carbon supports including activated carbon (AC), graphite oxide (GO), and reduced graphite oxide (rGO) using sol-immobilization method. Through transmission electron microscopy, powder X-ray di raction, and X-ray photoelectron spectroscopy, the role of the carbon supports for the catalytic performances of Pd/C catalysts was examined in selective hydrogenation of acetylene. The results indicate that Pd/AC exhibited higher activity and selectivity than Pd/GO and Pd/rGO in the gas phase selective hydrogenation of acetylene. Thermal and chemical treatment of AC supports also have some effect on the catalytic performance of Pd/AC catalysts. The differences in the activity and selectivity of various Pd/C catalysts were partly attributed to the metal-support interaction.     

A comparative study for the electrocatalytic oxidation of alcohol on Pt-Au nanoparticle-supported copolymer-grafted graphene oxide composite for fuel cell application

The platinum-gold bimetallic nanoparticles supported poly(cyclotriphosphazene-co-benzidine)-grafted graphene oxide (poly(CP-co-BZ)-g-GO) composite has been prepared for electrochemical performance studies. Cyclic voltammetry and chronoamperometric studies were carried out to check the electrochemical properties of Pt-Au/poly(CP-co-BZ)-g-GO and Pt/poly(CP-co-BZ)-g-GO catalysts for methanol, ethylene glycol and glycerol in alkaline medium. The morphology and crystalline structure of the prepared Pt-Au/poly(CP-co-BZ)-g-GO and Pt/poly(CP-co-BZ)-g-GO and catalysts have been characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive spectroscopy (EDS), X-ray diffraction (XRD) and fourier transform infrared spectroscopy (FT-IR). From the electrochemical results, it was concluded that Pt-Au/poly(CP-co-BZ)-g-GO catalyst shows higher catalytic activity and stability compared to Pt/poly(CP-co-BZ)-g-GO catalyst. The catalytic activity of Pt/poly(CP-co-BZ)-g-GO catalyst has been compared with Pt/poly(CP-co-BZ), Pt/GO and Pt/C catalysts. In addition, oxidation current of ethylene glycol is higher than the methanol and glycerol in alkaline medium on the prepared catalyst.     

Metal nanostructures with complex surface morphology: The case of supported lumpy Pd and Pt nanoparticles produced by laser processing of metal films

In this work we report on the formation of lumpy Pd and Pt nanoparticles on fluorine-doped tin oxide/glass (FTO/glass) substrate by a laser-based approach. In general, complex-surface morphology metal nanoparticles can be used in several technological applications exploiting the peculiarities of their physical properties as modulated by nanoscale morphology. For example plasmonic metal nanoparticles presenting a lumpy morphology (i.e. larger particles coated on the surface by smaller particles) can be used in plasmonic solar cell devices providing broadband scattering enhancement over the smooth nanoparticles leading, so, to the increase of the device efficiency. However, the use of plasmonic lumpy nanoparticles remains largely unexplored due to the lack of simply, versatile, low-cost and high-throughput methods for the controllable production of such nanostructures.Starting from these considerations, we report on the observation that nanoscale-thick Pd and Pt films (17.6 and 27.9 nm, 12.1 and 19.5 nm, respectively) deposited on FTO/glass surface irradiated by nanosecond pulsed laser at fluences E in the 0.5–1.5 J/cm² range, produce Pd and Pt lumpy nanoparticles on the FTO surface. In addition, using scanning electron microscopy analyses, we report on the observation that starting from each metal film of fixed thickness h, the fraction F of lumpy nanoparticles increases with the laser fluence E and saturates at the higher fluences. For each fixed fluence, F was found higher starting from the Pt films (at each starting film thickness h) with respect to the Pd films. For each fixed metal and fluence, F was found to be higher decreasing the starting thickness of the deposited film. To explain the formation of the lumpy Pd and Pt nanoparticles and the behavior of F as a function of E and h both for Pd and Pt, the thermodynamic behavior of the Pd and Pt films and nanoparticles due to the interaction with the nanosecond laser is discussed. In particular, the photothermal vaporization and Coulomb explosion processes of the Pd and Pt nanoparticles are invoked as possible mechanisms for the lumpy nanoparticles formation.     

Immobilization of noble metal nanoparticles on the surface of TiO2 by the sonochemical method: photocatalytic production of hydrogen from an aqueous solution of ethanol

Sonochemically prepared Pt, Au and Pd nanoparticles were successfully immobilized onto TiO2 with the assistance of prolonged sonication. Their photocatalytic activities were evaluated in H2 production from aqueous ethanol solutions. Beside the sonochemical method, the conventional impregnation method was also employed to prepare photocatalysts. The sonochemically prepared catalysts showed higher activities than did the conventional ones. Their photocatalytic activities depended on the work functions and the dimensions of supported noble metal nanoparticles. Smaller Pt nanoparticles effectively restricted recombination of electrons and holes and provided H2 at a higher rate.     

An X-ray photoelectron spectroscopy investigation of a novel Pd–Pt colloid catalyst

A Bi-promoted charcoal-supported Pd–Pt oxidation catalyst prepared from colloidal NOct₄Cl-stabilized Pd–Pt nanoparticles was investigated by means of X-ray photoelectron spectroscopy (XPS). Pd 3d, Pt 4f, Bi 4f, C 1s and O 1s spectra of the colloid, the supported colloid catalyst and a conventional charcoal-supported Pd–Pt/Bi coimpregnation catalyst (Degussa, CEF 196 RA/W) were measured. Both catalysts were explored unused (as-prepared) and after deactivation in the heterogeneous catalytic oxidation of glucose to gluconic acid. The spectra are analyzed to elucidate the higher starting activity of the Pd–Pt/Bi/C colloid catalyst, especially the role of the promotor Bi and the mechanisms leading to catalyst deactivation. The higher starting activity of the colloid catalyst is explained by the presence of completely reduced Pd and Pt, threevalent Bi and a smaller particle size in contrast to the conventional catalyst which contains partly oxidized Pd and a non-unique chemical state of Bi. The deactivation of both catalysts is suggested to be due to metal dissolution, particle growth and chemical poisoning.     

氧化石墨负载金催化剂在以O2为氧源的苯甲醇氧化反应中的催化性能:载体效应

对石墨氧化物经过加热处理和化学处理后担载金溶胶从而制备得到不同的Au/GO催化剂.利用X-射线光电子能谱,热脱附谱和拉曼光谱对催化剂的表面物种和结构进行了表征.结果表明,热处理和化学处理对Au/GO催化剂表面含氧物种的浓度、种类以及载体的晶体结构具有显著影响,进而导致催化剂在以O₂为氧源的液相苯甲醇选择氧化反应中的催化活性呈现明显差异.与载体表面含氧物种的浓度和种类这一因素相比,载体结构的有序程度对于Au/GO催化剂的催化活性起到更为重要的决定作用.     

Spectroscopic analysis of the riboflavin—serum albumins interaction on silver nanoparticles

Metallic nanoparticles (NPs) supported on oxides thin films are commonly used as model catalysts for studies of heterogeneous catalysis. Several 4d and 5d metal NPs (for example, Pd, Pt and Au) grown on alumina, ceria and titania have shown strong metal support interaction (SMSI), for instance the encapsulation of the NPs by the oxide. The SMSI plays an important role in catalysis and is very dependent on the support oxide used. The present work investigates the growth mechanism and atomic structure of Rh NPs supported on epitaxial magnetite Fe₃O₄(111) ultrathin films prepared on Pd(111) using the Molecular Beam Epitaxy (MBE) technique. The iron oxide and the Rh NPs were characterized using X-ray photoelectron spectroscopy (XPS), low-energy electron diffraction and photoelectron diffraction (PED). The combined XPS and PED results indicate that Rh NPs are metallic, cover approximately 20 % of the iron oxide surface and show height distribution ranging 3–5 ML (monolayers) with essentially a bulk fcc structure.     

Exploration of bimetallic Pt-Pd/C nanoparticles as an electrocatalyst for oxygen reduction reaction

In this study, carbon supported Pt and Pt-Pd were synthesized as oxygen reduction reaction electrocatalysts for polymer electrolyte membrane fuel cells (PEMFCs). Pt and Pt-Pd nanoparticles have been synthesized by reduction of metal precursors in presence of NaBH₄. Various techniques such as X-ray diffraction (XRD), energy dispersive X-ray analysis (EDX) and scanning electron microscopy (SEM) were utilized to study the prepared samples. Furthermore, electrochemical properties of the prepared samples were evaluated from cyclic voltammetry (CV), linear sweep voltammetry (LSV), chronoamperometry and electrochemical impedance spectroscopy (EIS). The results showed, the crystallite size of electrocatalysts (Pt and Pt-Pd) is below 10 nm. The higher catalytic activity was detected for Pt-Pd/C electrocatalyst for oxygen reduction reaction (ORR). In addition, it is believed that the better performance of electrocatalyst is related to the synergic effect between Pt and Pd nanoparticles, weakening of the OO bond on Pd-modified Pt nanoparticles in ORR, uniform dispersion of Pd and Pt on the carbon support and higher electrochemical active surface area (EAS) of Pt-Pd/C electrocatalyst.     

Effect of combination of noble metals and metal oxide supports on catalytic reduction of NO by H2

We investigated the effects of combination of noble metals M (Rh, Pd, Ir, Pt) and metal oxide supports S (Al₂O₃, SiO₂, ZrO₂, CeO₂) on the NO + H₂ reaction using planar catalysts with M/S two layered thin films on Si substrate. In this study, NO reduction ability per metal atom were evaluated with a specially designed apparatus employing pulse valves for the injection of reactant molecules onto catalysts and a time-of-flight mass spectrometer to measure multiple transient products: NH₃, N₂ and N₂O simultaneously as well as with an atomic force microscopy to observe the surface area of metal particles. The catalytic performances of Rh and Ir catalysts were hardly affected by a choice of a metal oxide support, while Pd and Pt catalysts showed different catalytic activity and selectivity depending on the metal oxide supports. This assortment is consistent with ability to dissociate NO depending on metals without the effect of any support materials. There, the metals to the left of Rh and Ir on the periodic table favor dissociation of NO and those to the right of Pd and Pt tend to show molecular adsorption of NO. Therefore, the catalytic property of noble metals could be assorted into two groups, i.e. Rh and Ir group whose own property would mainly dominate the catalytic performance, and Pd and Pt group whose interaction with metal oxides supports would clearly contribute to the reaction of NO with H₂. NO reduction activity of Pd and Pt was found to be promoted above that of Rh and Ir, provided that Pd and Pt were supported by CeO₂ and ZrO₂.     

Electrodeposition of platinum on tourmaline and application as an electrocatalyst for oxidation of methanol

A composite electrode of Pt nanoparticles coupled with tourmaline is prepared on glassy carbon (GC) disk electrode via electrodeposition. The nanocomposite of Pt/tourmaline is characterized by scanning electron microscopy, X-ray photoelectron spectroscopy, X-ray powder diffraction, and transmission electron microscopy examinations linked with energy dispersive X-ray analysis. The electrocatalytic performance of the composite electrode (Pt/tourmaline/GC) is investigated in electrocatalysis oxidation of methanol at room temperature by cyclic voltammetry and chronoamperometry. It is indicated that Pt nanoparticles with size of ∼5 nm are uniformly assembled along the tourmaline particles and Pt exists in metallic and oxidated states confirmed by XPS. The results of electro-oxidation of methanol show that Pt/tourmaline catalyst is catalytically more active and stable than platinum-modified GC electrode, and the onset potential of Pt/tourmaline shifts 0.15 V to the negative side, and also the current density is significantly enhanced.     

Preparation of cholesterol oxidase nanoparticles and their application in amperometric determination of cholesterol

Highly dispersed platinum nanoparticles were deposited on gram quantities of non-functionalized multiwalled carbon nanotubes (MWCNTs) by atomic layer deposition (ALD) in a fluidized bed reactor at 300 °C. (Methylcyclopentadienyl) trimethylplatinum and oxygen were used as precursors. The results of TEM analysis showed that ~1.3 nm Pt nanoparticles were highly dispersed on non-functionalized MWCNTs. The porous structures of MWCNTs did not change with the deposition of Pt nanoparticles. For comparison, the commercial 3 wt% Pt/C catalyst was also characterized. The ALD-prepared Pt/MWCNT was used for the hydrogenation of xylose to xylitol. The ALD-prepared Pt/MWCNT showed the best catalytic performance with 100 % conversion of xylose and 99.3 % selectivity to xylitol, compared to commercially available Pt/C, Ru/C, and Raney Ni catalysts. The stability of ALD produced Pt/MWCNT catalyst was higher than that of the commercial Pt/C, due to the presence of surface defects on the MWCNTs and the strong metal–support interaction for the ALD-prepared Pt/MWCNT catalyst.     

Poly(sodium-p-styrenesulfonate) assisted microwave synthesis of ordered mesoporous carbon supported Pd nanoparticles for formic acid electro-oxidation

Pd nanoparticles highly dispersed onto the surface of ordered mesoporous carbons (OMCs) were synthesized successfully by poly(sodium-p-styrenesulfonate) (PSS) assisted microwave synthesis. Here, PSS served as a bifunctional molecule both for solubilizing and dispersing OMCs into aqueous solution and for jointing Pd²⁺ to facilitate the subsequent uniform formation of Pd nanoparticles on their surfaces. The effects of PSS on structural and electrochemical properties of Pd/OMCs were investigated. It was found that the addition of PSS facilitated Pd nanoparticles to disperse on the carbon surface. Electrochemical properties showed that Pd catalysts prepared with addition of PSS displayed better electrochemical activity and stability for formic acid electro-oxidation than those without PSS.     

界面自组装的金/氧化石墨烯复合材料的表面增强拉曼散射行为研究

采用Frens法制备金纳米粒子溶胶,通过界面自组装技术在掺磷的非晶碳衬底表面构筑三维的金/氧化石墨烯/金复合结构.以罗丹明B为探针分子,考察金/氧化石墨烯/金复合材料的表面增强拉曼散射活性.结果表明,由于氧化石墨烯的化学增强和金纳米粒子的电磁场增强的协同作用,在该三维复合材料上获得了很强的罗丹明B拉曼信号.所设计的三维金/氧化石墨烯/金复合材料在生物分析、环境监测、疾病防控、食品安全等领域具有潜在的应用价值.     

Catalytic investigation of PtPd and titanium oxide-loaded reduced graphene oxide for enhanced formic acid electrooxidation

Preparation, characterization, and electrocatalytic study of the electrodeposited Pt and Pd (e.g., Pt and PtPd) catalysts on titanium dioxide (TiO₂) modified reduced graphene oxide (rGO) support for formic acid oxidation were performed. The catalyst composites are labeled as xPt/rGO-TiO₂, xPtyPd/rGO-TiO₂, and yPd/rGO-TiO₂ where x and y are cycle numbers of metal electrodeposition (x and y?=?2–6). The characterizations of the catalysts were performed by Fourier transform infrared spectroscopy (FT-IR), Raman spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X-ray (EDS), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). Small and dispersed metal nanoparticles are obtained on rGO-TiO₂. The catalytic performances for formic acid oxidation were measured by cyclic voltammetry (CV) and chronoamperometry (CA). The electrocatalytic results reveal that the bimetallic 4Pt2Pd/rGO-TiO₂ catalyst facilitates formic acid oxidations at the lowest potentials and generates the highest oxidation currents and also improves the highest CO oxidation compared to the monometallic 6Pt/rGO-TiO₂ catalyst. According to the experimental data, the Pd and TiO₂ enhance the electrocatalytic activity of the catalysts towards the formic acid oxidation; the improved catalytic performance of the prepared catalysts strongly relates to the high electrochemically active surface area (ECSA) investigated.

Open image in new window

Graphical abstract TEM image of xPtyPd/rGO-TiO₂ and its CV towards oxidation

     

Chemisorption of CO and H on Pd, Pt and Au nanoclusters: a DFT approach

We have performed a theoretical study of pure metal nanoparticles (Pd/Pt/Au) and their interaction with CO molecules and atomic hydrogen, in order to investigate chemisorption effects of relevance to catalysis by nanoparticles. First-principles density-functional local relaxations are used to investigate the effect of CO and H adsorption on six structural motifs. The results of the energetic crossover and structural deformations are analyzed in terms of the interplay between metal-metal interactions (including internal and surface stress) and CO-metal and H-metal interactions. It is found that H adsorption releases surface stress, thus favoring 5-fold symmetry motifs, whereas CO adsorption produces a flattening of the potential energy surface of the metal clusters.     

Elucidating synthesis of noble metal nanoparticles/graphene oxide in free-scavenger γ-irradiation

Three representative noble metal (Ag, Au and Pt) nanoparticles decorated graphene oxide (NMNPs/GO) composites were fabricated via γ-irradiation without scavenger. The NMNPs/GO composites exhibited the pure and well-dispersed particles structure, which directly illustrated that the GO could be acted as scavenger to benefit reduction and growth of NMNPs. Compared with irradiated GO (IGO), the GO substrate of composites had the lower relative content of hydroxyl groups, meanwhile, the relative contents of carbonyl groups (Pt > Au > Ag) were increased with increasing valence of noble metal. Such results illustrated that the abundant hydroxyl groups could convert the hydrated electrons, hydroxyl and hydrogen radicals to promote the growth of NMNPs on the surface of GO. In addition, the Raman signals of Ag NPs/GO composites were significantly enhanced (6.18 fold more than pristine GO, respectively), exhibiting obvious surface-enhanced Raman scattering activity. Therefore, this paper revealed that the GO could convert the hydrated electrons and radicals to synthetizing NMNPs/GO composites during γ-ray irradiation.     

Decorating graphene sheets with Pt nanoparticles using sodium citrate as reductant

In this paper, we proposed a novel and green approach for the synthesis of graphene nanosheets (GNS) and Pt nanoparticles-graphene nanosheets (Pt/GNS) hybrid materials, employing graphene oxide (GO) as precursor and sodium citrate as environmentally friendly reducing and stabilizing agent. The microstructures of GO and Pt/GNS were characterized by high resolution transmission electron microscopy (HRTEM), scanning electron microscopy (SEM), Raman spectroscopy, atomic force microscopy (AFM), X-ray diffraction (XRD) and electrochemical measurements. The results confirmed that the uniform size distribution of Pt nanoparticles on the surface of GNS without agglomerates could be easily obtained via using sodium citrate as reductant, moreover the Pt/GNS hybrids exhibited high electrochemical activity.     

PdPt Nanocubes: A High‐Performance Catalyst for Hydrolytic Dehydrogenation of Ammonia Borane

An effective way to improve the catalytic activity of metal‐based nanostructured materials is to control the size, shape, or composition. Here, the bimetallic PdPt nanoparticles (NPs) show significant dependency on the shape for catalytic hydrolysis of ammonia borane. The catalytic activity of PdPt cubic nanoparticles (cNPs) is found to be the best compared with the activities of spherical nanoparticles (sNPs) of Pd, Pt, and PdPt and cNPs of Pd under the same reaction conditions. The turnover frequency (50.02 min^?1) of PdPt cNPs for ammonia borane hydrolysis is among the values of the most active catalysts. This high catalytic performance of PdPt cNPs encourages the approach of shape and composition control for various catalytic applications.     

Synthesis of bimetallic systems using replacement reactions

Series of bimetallic systems were prepared by replacement reactions and characterized by XRD and XPS. The results suggest that the ad-metals are monolayer dispersed on the surface of sub-metal in Pd(Pt, Cu)/Co(Ni) systems, while in Pd(Pt, Au)/Cu systems surface solid solution is formed. In Ag(Au)/Co(Ni) and Ag/Cu systems no interaction between the metals is observed just as in the simple mixture of the respective crystallites. The outermost electronic configurations, the atomic radius of the metals, and the low-preparation temperature seem to be important factors for the different states of these bimetallic catalysts.     

Hydrophobic Bimetallic Catalysts for H/D Exchange Reaction between Hydrogen and Water

Hydrophobic bimetallic catalysts of Pt-M on styrenedivinylbenzene were prepared, where M represents successively: Ir, Rh, Pd, Cu and Ag. The total metal loading was 0.5 wt% and the weight fractions of the metal M were: 0.0,0.05,0.1,0.25,0.5,0.75 and 1.0. For each sample, the catalytic activity for H/D exchange between hydrogen and water vapor was measured. In case of monometallic catalysts, no activity was detected for M = Cu and M = Ag, and the order of the activity values for the other metals was: Pt < Ir < Rh < Pd. For each bimetallic catalyst, the activity measurements indicated a clear interaction between the platinum and the second metal, thus the activity was significantly increased for M = Ir, increased for M = Rh, decreased for M = Pd, drastically decreased for M = Cu and M = Ag.