可降解聚合物包覆次血红素六肽微球的制备及生物活性

采用水包油包水(W₁/O/W₂)复乳溶剂挥发法制备了包覆次血红素六肽(DhHP-6)的2种聚酯微球. 通过扫描电子显微镜、 体外缓释行为、 高效液相(HPLC)检测、 酶活力测定和初步的动物实验等表征, 综合评价了载药微球的体外释放及体内生物活性. 实验结果表明, 载药微球球体圆整, 粒径分布均匀, 载药量高, 能够实现体外缓释, 并对细胞过氧化损伤和小鼠脑缺血损伤均有一定的保护作用.     

Defined Picogram Dose Inclusion and Release of Macromolecules using Polyelectrolyte Microcapsules

Summary: Reversible pH‐induced swelling of (PAH/PSS) polyelectrolyte microcapsules is accompanied by increased porosity, making them permeable to poly(acrylic acid) (PAA) at pH values higher than 11.2. This pH‐switchable permeability was used to encapsulate the polyanion in alkaline conditions. Relationship between starting PAA concentration in solution and amount finally being encapsulated has been established and can be used further as calibration curve. A desired amount of encapsulated polymer in the picogram range per capsule can be achieved. The loaded capsules were then used as microreactors by forming a complex between the PAA and Ca²⁺ ions.

General scheme for pH‐induced encapsulation of (PAA) in alkali condition by switching their permeability.     

Novel PLGA Microspheres for Sustained Delivery of Antisense Oligonucleotide

Novel poly(lactide-co-glycolide acid)(PLGA) microspheres were developed for sustained delivery of antisense oligonucleotide(ASO). First, a new cationic agent, polyethylenimine(PEI) conjugated to linoleic acid(LA)(PEI-LA) was synthesized by reacting PEI(M_w=800) with linoleoyl chloride. Then, PEI-LA was combined with LOR-2501 to form electrostatic complexes at moderate nitrogen-to-phosphate(N/P) molar ratios which were then encapsulated into poly(lactide-co-glycolide) microspheres by a multiple emulsion-solvent evaporation technique. With an increase in ASO/PEI-LA concentration from 5% to 10%, encapsulation efficiency of ASO in the microspheres reduced from 72.14% to 57.62%, and the particle size of microspheres increased from 28.58 μm to 34.76 μm. In vitro studies show that the release profile of ASO from microspheres prepared at 7.5% ASO-PEI-LA lasted for 14 d. The novel microspheres have a potential use as a sustained release vehicle for ASO.     

Microencapsulation of bovine hemoglobin with high bio-activity and high entrapment efficiency using a W/O/W double emulsion technique

This study focused on the influences of solvent removal method and wall polymer composition on microspheres characteristics in W/O/W double emulsion procedure. Monomethoxypoly(ethylene glycol)-b-poly- -lactide (PELA) microspheres containing bovine hemoglobin (BHb, a model protein) were prepared by four solvent removal methods, including solvent-evaporation at atmosphere, at reduced pressure, solvent-extraction and solvent-diffusion methods, where the last method used ethyl acetate (EA) as organic solvent and the others used methylene chloride (MC). The bio-activity of encapsulated BHb, encapsulation efficiency, particle size and surface morphology of microspheres were evaluated in relation to the influences of solvent removal method and PELA composition. BHb encapsulated by the W/O/W double emulsion–solvent diffusion method with EA as organic solvent displayed a bio-activity near to that of native BHb. The efficiency of BHb entrapment achieved by this method was much higher than those by other methods (ca. 90% versus 30%). When using this process, the copolymers with MPEG 2000 block (molecular weight of PEG block: 2000 g/mol) yielded much higher efficiencies of BHb entrapment than those with MPEG 5000 block (90% versus 36%). Copolymer composition had less impact on microsphere size, but had a pronounced effect on surface morphology of microspheres. This study suggests that the W/O/W double emulsion–solvent diffusion method with EA as organic solvent is an effective process to prepare microspheres containing therapeutic proteins, and that the PELA copolymers containing MPEG 2000 block are promising wall material for biodegradable microsphere protein delivery system.     

Preparation and resistivity study of silver nanocomposite films using spin‐assisted layer‐by‐layer assembly

Nanocomposite films [Ag/(PAH‐PSS)_nPAH]_m were fabricated on a silicon substrate using a time‐ and cost‐efficient spin‐assisted layer‐by‐layer (SA‐LbL) self‐assembly technique. A virtually monolayer‐like layer of self‐assembled silver nanoparticles was formed when deposition time increased to 30 min. It was found that polymer multilayers could effectively decrease the resistivity of silver nanoparticle monolayer, which was far higher than that of bulk silver metal; however, the resistivity of Ag/(PAH‐PSS)_nPAH multilayer films increased along with the increasing of the number of polymer bilayers. XPS investigations showed that silver nanoparticles were partially oxidized, which might be the major cause of the high resistivity of silver nanoparticle monolayer. Copyright © 2008 John Wiley & Sons, Ltd.     

Encapsulation of a highly sensitive EPR active oxygen probe into sonochemically prepared microspheres

High-power ultrasound (20 kHz) was used to encapsulate a solution of perchlorotriphenylmethyl triester (PTM-TE, a stable organic free radical) dissolved in hexamethyldisiloxane (HMDS) into a polymerized shell of bovine serum albumin (BSA). The size distribution of the microspheres was between 0.5 and 3 microm with a maximum at approximately 1.2 microm. The electron paramagnetic resonance spectrum of PTM-TE consists of a single, sharp line which is sensitive to the surrounding concentration of oxygen. It was found that the technique of encapsulating a solution of PTM-TE dissolved in HMDS into the BSA microspheres resulted in an overall loss of EPR signal intensity from the washed suspension of microspheres. However, the encapsulated PTM-TE/HMDS solution remained sensitive to the partial pressure of oxygen in the surrounding environment. The microspheres were found to be useful for determining the partial pressure of oxygen in the muscle and tumor tissue of mice.     

Activity of immobilized trypsin in the layer structure of polyelectrolyte microcapsules (PEMC)

Polyelectrolyte microcapsules composed by using the LbL technique on stabilized RBC as templates were coated with up to ten layer pairs of trypsin/PSS or trypsin/alginate. The trypsin layer growth was confirmed by particle electrophoresis, confocal laser scanning microscopy, flow cytometry, and protein determination according to Lowry. In the coating series with trypsin/PSS, the amount of immobilized enzyme was larger than that with trypsin/alginate. The enzyme immobilization led to activity reduction of up to 90% compared to that of the same enzyme amount in the solution. No significant differences between the activities of trypsin immobilized in combination with PSS and with alginate were found.     

Superparamagnetic pH‐sensitive multilayer hybrid hollow microspheres for targeted controlled release

The superparamagnetic multilayer hybrid hollow microspheres have been fabricated using the layer‐by‐layer assembly technique by the electrostatic interaction between the polyelectrolyte cation chitosan (CS) and the hybrid anion citrate modified ferroferric oxide nanoparticles (Fe₃O₄‐CA) onto the sacrificial polystyrene sulfonate microspheres templates after etching the templates by dialysis. The saturation magnetization and magnetite contents of the superparamagnetic multilayer hybrid hollow microspheres were 32.46 emu/g and 51.3%, respectively. The hybrid hollow microspheres showed pH‐sensitive characteristics. The adsorption and release of the basic dye (methylene blue) were applied to investigate the interaction between the amino groups of CS and the carboxyl groups of the Fe₃O₄‐CA nanoparticles in different pH media. The superparamagnetic pH‐sensitive multilayer hybrid hollow microspheres are expected to be used for the targeted controlled release of drugs or in diagnostics. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3135–3144, 2010     

Immobilized Laccase on Activated Poly(Vinyl Alcohol) Microspheres For Enzyme Thermistor Application

Poly(vinyl alcohol) (PVA) microspheres were prepared by inverse suspension crosslinked method, with glutaraldehyde as a crosslinking agent. PVA microspheres activated with aldehyde groups were employed for Trametes versicolor laccase immobilization. Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy were used to characterize the activated PVA microspheres and PVA microspheres with immobilized laccase (Lac/PVA microspheres), which show that laccase was successfully immobilized on the PVA microspheres. The optimum pH and temperature coupling conditions for the immobilized laccase were determined to be 3.3 and 30 °C, respectively. Residual activity was also investigated by soaking the immobilized laccase in organic solvents at different concentrations, proving it chemically stable. Immobilized laccase exhibited good storage stability at 4 °C. The enzyme biosensor showed good performance in 2,2-azinobis(3-ethylthiazoline-6-sulfonate) and bisphenol A, with concentration ranges of 2 to 8 mM and 0.05 to 0.25 mM, respectively. Therefore, PVA microspheres may have high potential as support for enzyme thermistor applications.     

Hydrogen Peroxide Sensor Based on Horseradish Peroxidase Combined with CaCO3 Microspheres and Gold Nanoparticles

Direct electrochemistry and electrocatalysis of horseradish peroxidase(HRP) were achieved by entrapping the enzyme between CaCO3 microspheres and gold nanoparticles through forming sandwich configuration (CaCO3-HRP-AuNPs). Polyanion, poly(styrene sulfonate)(PSS), was hybrid with CaCO3 microspheres to increase the surface negative charges for binding with HRP through electrostatic interaction. After the bioconjugate CaCO3 PSS-HRP was entrapped in chitosan based sol-gel(CS-GPTMS) film, HRP was encapsulated by in situ formation of an outer layer of AuNPs through electrochemical reduction of HAuCl4. The composite film containing AuNPs, CaCO3-PSS-HRP bioconjugates and CS-GPTMS can provide favorable microenvironment for HRP to perform direct electron transfer at glassy carbon electrode(GCE). HRP retained its bioelectrocatalytic activity and lead to sensitive and fast amperometric response for the determination of H2O2. H2O2 could be detected in a very wide linear range from 5.0×10–6 mol/L to 7.1×10–2 mol/L. The sandwich configuration of CaCO3-biomolecules-AuNPs could serve as a versatile platform for enzyme immobilization and biosensing.     

High-flux nanofiltration membranes prepared by adsorption of multilayer polyelectrolyte membranes on polymeric supports

Layer-by-layer deposition of anionic and cationic polyelectrolytes readily converts polymeric ultrafiltration membranes into materials capable of nanofiltration. ATR-FTIR spectra confirm that layer-by-layer deposition occurs on the ultrafiltration substrates, and adsorption of as few as 2.5 bilayers of poly(styrenesulfonate) (PSS)/protonated poly(allylamine) (PAH) or 3.5 bilayers of PSS/poly(diallyldimethylammonium chloride) (PDADMAC) reduces the molecular weight cutoff of polyethersulfone ultrafiltration supports from 50 kDa to <500 Da. Deposition of multilayer polyelectrolyte films on 300 and 500 kDa membranes also decreases molecular weight cutoffs, but solute rejections are significantly lower when using these supports, suggesting that the polyelectrolyte films do not completely cover large (0.2-0.4 microm in diameter) pores. On the 50 kDa substrates, PSS/PDADMAC films containing 3.5 bilayers exhibit a 95% rejection of SO(4)(2-) and a chloride/sulfate selectivity of 27, whereas 4.5-bilayer PSS/PAH coatings show a glucose/raffinose selectivity of 100. Pure water flux for [PSS/PAH](3)PSS-coated membranes at 4.8 bar is 1.6 m(3)/(m(2)day), which is more than 2-fold higher than that through a commercial 500 Da membrane.     

Nisin antimicrobial activity and structural characteristics at hydrophobic surfaces coated with the PEO-PPO-PEO triblock surfactant Pluronic F108

The antimicrobial peptide nisin has been observed to preferentially locate at surfaces coated with the poly[ethylene oxide]-poly[propylene oxide]-poly[ethylene oxide] (PEO-PPO-PEO) surfactant Pluronic F108, to an extent similar to its adsorption at uncoated, hydrophobic surfaces. In order to evaluate nisin function following its adsorption to surfaces presenting pendant PEO chains, the antimicrobial activity of nisin-loaded, F108-coated polystyrene microspheres and F108-coated polyurethane catheter segments was evaluated against the Gram-positive indicator strain, Pediococcus pentosaceus. The retained biological activity of these nisin-loaded layers was evaluated after incubation in the presence and absence of blood proteins, for contact periods up to one week. While an increase in serum protein concentration reduced the retained activity on both bare hydrophobic and F108-coated materials, F108-coated surfaces retained more antimicrobial activity than the uncoated surfaces. Circular dichroism spectroscopy experiments conducted with nisin in the presence of F108-coated and uncoated, silanized silica nanoparticles suggested that nisin experienced conformational rearrangement at a greater rate and to a greater extent on bare hydrophobic surfaces relative to F108-coated surfaces. These results support the notion that immobilized, pendant PEO chains confer some degree of conformational stability to nisin while also inhibiting its exchange by blood proteins.     

Manipulating the generation of Ca-alginate microspheres using microfluidic channels as a carrier of gold nanoparticles

In this paper the manipulation of Ca-alginate microspheres, using a microfluidic chip, for the encapsulation of gold nanoparticles is presented. Our strategy is based on hydrodynamic-focusing on the forming of a series of self-assembling sphere structures, the so-called water-in-oil (w/o) emulsions, in the cross-junction microchannel. These fine emulsions, consisting of aqueous Na-alginates, are then dripped into a solution of 20% calcium salt to accomplish Ca-alginate microspheres in an efficient manner. Experimental data show that microspheres with diameters ranging from 50 microm to 2000 microm with a variation less than 5% were precisely generated. The size and gap of the droplets are tunable by adjusting the relative sheath/sample flow rate ratio. Furthermore, we applied them to encapsulated gold nanoparticles, and this one shot operation performs the 'Lab on a Chip'.     

Use of a new methacrylic monomer, 4,4′‐di(2‐hydroxy‐3‐methacryloyloxypropoxy)benzophenone,in the synthesis of porous microspheres

A new aromatic, tetrafunctional methacrylate monomer, 4,4′‐di(2‐hydroxy‐3‐methacryloyloxypropoxy)benzophenone, and its application to the synthesis of porous microspheres are presented. This new monomer was copolymerized with divinylbenzene in the presence of pore‐forming diluents. The properties of the obtained highly crosslinked microspheres were investigated as column packing for high‐performance liquid chromatography. Their porous structures in both dry and wet states were studied and compared with those of poly(divinylbenzene) and the less crosslinked copolymer of 2,3‐epoxypropyl methacrylate and divinylbenzene. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 7014–7026, 2006     

含氨基和环氧基双功能基的聚合物刷磁性微球的制备及对青霉素G酰化酶的固定化

在内部分散超顺磁性Fe3O4纳米粒子的二乙烯苯交联聚丙烯酸微球表面引入原子转移自由基聚合(ATRP)引发剂,引发聚合向微球表面分别引入P(GMMA-r-DMAEMA-r-GMA)、P(GMMA-r-DMAEMA)和P(GMMA-r-GMA)无规共聚物刷(GMMA为甲基丙烯酸甘油单酯,DMAEMA为甲基丙烯酸-N,N-二甲氨基乙酯,GMA为甲基丙烯酸缩水甘油酯),聚合物刷中GMMA链节的作用是使聚合物刷具有亲水性,DMAEMA引入氨基,GMA引入环氧基.研究了青霉素G酰化酶在这些载体上的固定化和其酶活性.结果表明,同时引入环氧基和氨基的P(GMMA-r-DMAEMA-r-GMA)刷磁性微球固定化青霉素G酰化酶的活性和活性收率都最高,其固定化动力学比只含环氧基P(GMMA-r-GMA)刷磁性微球的好.固定化酶比自由酶更耐热,固定化酶的最佳pH值比自由酶的略高,固定化酶重复使用10次后其活性保留70%.     

Electrochemical Properties of a Boron‐Doped Diamond Electrode Modified with Gold/Polyelectrolyte Hollow Spheres

Oppositely charged polyelectrolyte (poly(allyamine hydrochloride) (PAH) and poly(sodium 4‐styrene‐sulfonate) (PSS)), and negatively charged gold nanoparticles (Au) were assembled alternately on polystyrene (PS) spheres via layer‐by‐layer technique, and the different PAH/(PSS/PAH)_n/(Au/PAH)_m/Au composite hollow spheres were derived by dissolving PS core. These hollow spheres were used to modify boron‐doped diamond (BDD) electrodes for electrochemical sensors. The cyclic voltammetric results for dopamine (DA) detection demonstrated that hollow‐sphere‐modified BDD exhibited better electrocatalytic activity than did bare BDD. Influence of the wall thickness and composition of hollow spheres on electrochemical properties were investigated. The results showed that the oxidative peak potential of DA and the peak current varied with different PSS/PAH and Au/PAH layers. The optimized wall structure of hollows spheres was PAH/(PSS/PAH)₇/(Au/PAH)₅/Au.     

Preparation of silica microspheres with a broad pore size distribution and their use as the support for a coated cellulose derivative chiral stationary phase

A templating strategy using crosslinked and functionalized polymeric beads to synthesize silica microspheres with a broad pore size distribution has been developed. The polymer/silica hybrid microspheres were prepared by utilizing the combination of a templating weak cation exchange resin, a structure‐directing agent N‐trimethoxysilylpropyl‐N,N,N‐trimethylammonium chloride, and a silica precursor tetraethyl orthosilicate. The silica microspheres were then obtained after calcinating the hybrid microspheres. The as‐prepared materials were characterized by scanning electron microscopy, mercury intrusion porosimeter, and thermal gravimetric analysis. The results showed that the starting templating beads were about 5 μm in diameter and the formed silica microspheres were less than 3 μm with a pore size range of 10–150 nm, some pores were even extended to beyond 250 nm. It was demonstrated that cellulose tris(3,5‐dimethylphenylcarbamate) was readily coated onto the surface of the as‐synthesized silica microspheres without any additional surface pretreatment. The coated silica microspheres were uniformly dispersed even with high loading of the chiral stationary phase, which exhibited high resolution chiral separations in high‐performance liquid chromatography.     

Manipulating the properties of coacervated polyelectrolyte microcapsules by chemical crosslinking

The properties of coacervated sodium poly(styrene sulfonate) (PSS)/poly(allylamine hydrochloride) (PAH) microcapsules were manipulated by glutaraldehyde crosslinking at mild conditions. Although the crosslinking took place only between the PAH component, only 10% of PSS was lost from the 2-h crosslinked microcapsules. Significant variation in terms of capsule morphology, diameter, and wall thickness was not found by scanning electron microscopy and scanning force microscopy. Although all the microcapsules were not affected by annealing at 70 °C and incubation in 0.1 M HCl for 2 h, the crosslinked microcapsules indeed showed strong ability to resist osmotic-induced capsule invagination. Also, the 20-min and 2-h crosslinked capsule walls have elasticity modulii of 166 and 200 MPa, respectively, which are both larger than that of the original one (140 MPa). The crosslinked microcapsules also showed good stability in 0.01 M NaOH solution and poorer permeability for a large fluorescent probe.     

An investigation of heparinase immobilization

A systematic investigation of the parameters that affect the efficiency of immobilizing heparinase onto cyanogen bromide activated crosslinked 8% agarose beads was conducted. Two experimental measures, the “fraction bound” and the “fraction retained,” were used to monitor the coupling efficiency. The fraction bound is the portion of the total initial enzyme that is bound to the agarose gel. The fraction retained is the fraction of bound enzyme that is active. The product of the two measures indicates the coupling efficiency. The activity of the immobilized heparinase was measured under conditions free of both internal and external mass transfer limitations, and thus, the fraction retained represents the true immobilized enzyme activity. Increasing the degree of activation of the beads results in an increase in the fraction bound, the fraction retained, and consequently, the coupling efficiency. As the ratio of enzyme solution to gel volume increases from 1.5 to 2.2, the fraction bound remains constant but the fraction retained decreases (heparinase concentration; 0.15 mg/mL and degree of activation; 9.5 μmol of cyanate esters/g of gel). At volume ratios greater than 2.2, both the fraction bound and the fraction retained decline continuously. Changing the heparinase concentration in the coupling solution changes the coupling efficiency in a manner similar to that of the volume ratio change. When heparin is added during the coupling process, the fraction bound declines as the heparin concentration increases, whereas the fraction retained increases up to a heparin concentration of 12 mg/mL and decreases thereafter. When arginine, lysine, and glycine are used to block the unreacted cyanate ester groups after the coupling process, the immobilized heparinase shows different pH optima of 6.5, 6.9, and 7.2, respectively. Based upon these findings, a protocol to optimize heparinase immobilization is developed.     

Preparation of PLGA microspheres with different porous morphologies

Poly(D,L-lactide-co-glycolide)(PLGA) microspheres were prepared by emulsion solvent evaporation method. The influences of inner aqueous phase, organic solvent, PLGA concentration on the morphology of microspheres were studied. The results showed that addition of porogen or surfactants to the inner aqueous phase, types of organic solvents and polymer concentration affected greatly the microsphere morphology. When dichloromethane was adopted as organic solvent, microspheres with porous structure were produced. When ethyl acetate served as organic solvent, two different morphologies were obtained. One was hollow microspheres with thin porous shell under a lower PLGA concentration, another was erythrocyte-like microspheres under a higher PLGA concentration. Three types of microspheres including porous, hollow core with thin porous shell(denoted by hollow in brief) and solid structures were finally selected for in vitro drug release tests. Bovine serum albumin(BSA) was chosen as model drug and encapsulated within the microspheres. The BSA encapsulation efficiency of porous, hollow and solid microspheres was respectively 90.4%, 79.8% and 0. And the ultimate accumulative release was respectively 74.5%, 58.9% and 0. The release rate of porous microspheres was much slower than that of hollow microspheres. The experiment results indicated that microspheres with different porous structures showed great potentials in controlling drug release behavior.