Determination at low ppm levels of dithiocarbamate residues in foodstuff by vapour phase-liquid phase microextraction-infrared spectroscopy

A methodology based on the vapour phase (VP) generation of carbon disulphide from non-volatile dithiocarbamate compounds has been developed for determination of pesticide residues in foodstuff at low ppm levels. The method involves a selective reaction combined with liquid phase microextraction (LPME) and transmission infrared measurements. The use of a home made transmission cell improved the detection limits (LOD) compared to the use of attenuated total reflectance measurements by a factor of approximately 80. Using the most appropriate experimental conditions for the CS₂ generation and LPME preconcentration, the precision of the methodology, expressed as the relative standard deviation (RSD), was of the order of 3.1% and the absolute LOD was 0.3 μg dithiocarbamate, which corresponds to 60–120 μg kg⁻¹, for a sample mass ranging from 2.5 to 5 g. The usefulness of the methodology has been evidenced by the determination of mancozeb residues in strawberries, lettuce and corn samples at concentrations between 1 and 5 mg kg⁻¹, where the VP-LPME IR provided results comparable with those obtained by a head space gas chromatography mass spectrometry reference procedure.     

HPLC determination of pyroglutamic acid as a degradation product in parenteral amino acid formulations

Summary The aminoacid glutamine in aqueous solution and in conditions of high temperature and long term storage is partly transformed into pyroglutamic acid which exhibits potential neurotoxic effects.Commercially available aminoacid mixtures supplemented with glutamine are heat-sterilized and some losses of glutamine and formation of pyroglutamic acid may occur.The aim of the work was to set up an easy and reliable HPLC method which allows the determination of pyroglutamic acid as a degradation product of glutamine. The column was a 5 m Hypersil ODS (100×4.6 mm) and the mobile phase 100% 0.007 M phosphate buffer pH 3.5.Stability studies in different conditions of temperature and time of storage were performed on aminoacid mixture available in the commerce.     

Determination of Amino Acidsas Their N-Hydroxy-succinimidyl-3-indolylacetate Derivatives by Reversed-phase HPLC

ＤｅｔｅｒｍｉｎａｔｉｏｎｏｆＡｍｉｎｏＡｃｉｄｓａｓＴｈｅｉｒＮ┐Ｈｙｄｒｏｘｙ┐ｓｕｃｃｉｎｉｍｉｄｙｌ┐３┐ｉｎｄｏｌｙｌａｃｅｔａｔｅＤｅｒｉｖａｔｉｖｅｓｂｙＲｅｖｅｒｓｅｄ┐ｐｈａｓｅＨＰＬＣ＊ＱＩＵＰｅｉ－ｈｏｎｇ＊＊（Ｄｅｐａｒｔｍｅ...     

Determination of caffeine in solid pharmaceutical samples by FTIR spectroscopy

Fourier transform infrared spectroscopy has been used for the quantitative determination of caffeine in several pharmaceutical products: acetyl salicylic acid, paracetamol and propyphenazone. The method is simple, rapid and selective, and allows the determination of caffeine without sample pretreatment and without separation from the matrix. Two techniques for measuring the infrared spectra of caffeine are described: transmission through pellets and diffuse reflectance from powder (DRIFT). In both methods, samples were diluted (1%) with KBr. Caffeine in pharmaceutical matrices was recovered within 5% error in pellets and 10% by DRIFT. Relative standard deviations were generally 1.5% for repeated measurements on a single pellet and 5% for measurements on different pellets. DRIFT in the vacuum mode gave rather large RSDs. The limit of detection of the pellet technique was about 0.5% caffeine in the original sample.     

Trace element analysis of high purity arsenic through vapour phase dissolution and ICP-QMS

Vapour phase dissolution (VPD) has been used for the dissolution of high purity arsenic through acid vapours generated by aquaregia mixture, prior to trace element characterization. Trace impurities in As were determined by employing ion-exchange and volatilization methodologies for quantitative separation of the As matrix. After dissolving the As matrix through VPD procedure, sample solution in 0.1 M HF medium was loaded on Dowex-50WX8. The sorbed elements were then eluted first with a 20 ml aliquot of 4 M HNO₃ followed by another 10 ml of 6 M HNO₃ for the elution of REE (La, Ce, Gd and Lu). In the volatilization procedure, arsenic was removed from H₂SO₄ medium as volatile bromide by three successive additions of HBr at a temperature of about 220 °C. The trace element determinations were carried out by ICP-QMS. In both the matrix separation procedures namely on Dowex-50WX8 in 0.1 M HF medium and volatilization from H₂SO₄+HBr medium showed that the removal of arsenic matrix was nearly quantitative (>99.99%). The recoveries of trace elements were found to be >95%. Good agreement was obtained for many elements in both the procedures. The VPD approach provides considerable reduction of the process blank levels for all the elements when compared with conventional open dissolution approach. The subsequent ion-exchange or volatilization steps, contribute more to the overall process blanks.     

红外光谱法直接鉴别苦丁茶的研究

本文利用傅立叶变换红外光谱(FTIR)法快速、直接地测定了11种苦丁茶,并对所获得的指纹图谱进行特征峰指认和对比分析。结果表明:各种苦丁茶化学成分相同,而由于各成分间的相对含量的不同,使每种样品都有自己独特的红外谱图,不同产地、不同级别苦丁茶的红外吸收频率、吸收峰的相对强度都存在比较大的差异。同时还运用傅立叶变换红外光谱技术对不同产地、不同级别苦丁茶的混合化学体系进行了全组分快速分析,为苦丁茶的鉴别及质量控制提供了可靠的依据。     

蛋白质和变性蛋白质二级结构的FTIR分析进展

蛋白质结构的研究一直是人们研究的一个热点,蛋白质在发生变性后,二级结构会改变,从而导致生物活性丧失,这些与医药学及食品科学等领域密切相关。傅里叶变换红外光谱(FTIR)作为一种无损、快速的分析方法在蛋白质二级结构的研究中发挥重要的作用,本文就FTIR对于蛋白质二级结构的研究作一初步概述,主要介绍FTIR研究蛋白质结构的主要方法、红外光谱的谱学特点。     

Micro ATR‐FTIR study of the hydration state of poly(N‐tert‐butylacrylamide‐co‐acrylamide) copolymers during phase transition in aqueous media and in the mixture of water–methanol

Coil‐globule transition of poly(N‐tert‐butylacrylamide‐co‐acrylamide) P(NTBAM‐co‐AM) copolymers is investigated in the aqueous solution and in the mixture of water–methanol by micro ATR‐FTIR spectroscopy technique. In this study the microstructure and its changes in the hydration states of the distinct groups of these copolymers are investigated by micro ATR/FTIR technique. The results showed that by heating the solution above the LCST hydrogen bonding between C?O and water was decreased but the hydrogen bonding between polymeric chains increased, which prove the aggregation of polymer chain during phase separation. The chemical shifts of IR bands are also studied in the mixture of water–methanol. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 356–363, 2010     

气相色谱-质谱联用法测定农药制剂中29种助剂

建立了气相色谱-质谱联用法（GC-MS）同时测定农药制剂中29种助剂的方法。农药制剂经甲醇稀释,取上清液过0.22 μm滤膜后检测分析。采用VF-1701MS毛细管柱（60 m×0.25 mm×0.25 μm）分离,选择离子监测模式下（SIM）测定,外标法定量。结果表明,29种农药助剂在6.2~400.0 mg/L范围内线性关系良好,相关系数（R²）均大于0.99,方法定量限为4.4~439.1 mg/kg,乳油型和可溶液剂型农药样品的平均加标回收率分别为82.0%~111.9%和82.6%~112.9%,相对标准偏差为0.4%~7.2%和0.3%~8.2%（RSD,n=6）。应用该方法对110份农药制剂样品进行检测,其中28份检出苯酚、N-甲基吡咯烷酮、二氯甲烷、正己烷等共11种农药助剂,含量范围为0.05%~15.65%。此方法操作简单,灵敏度高,准确性好,适用于农药制剂中29种助剂的同时检测。     

Determination of mono and disaccharide content of enteral formulations by gas chromatography

Summary A quantitative GC method has been developed which allows determination of mono and disaccharides in enteral formulations. The method is based on the isolation of the mono and disaccharide fraction on a charcoal-celite column and conversion to trimethylsilylated oximes (TMS-oximes). The repeatability of the complete method and recovery were acceptable. In the five commercial samples assayed, maltose was the main sugar (5.24–8.85 gL⁻¹) followed by glucose (1.06–2.41 gL⁻¹) and lactose (0–1.17 gL⁻¹) Low levels of fructose (0–0.18 gL⁻¹) and sucrose (0–0.07 gL⁻¹) were observed and galactose was detected in two of the samples. The presence of maltulose is reported in enteral formulations for the first time. Maltulose formed from maltose during processing, was present in variable amounts (0.12–1.07 gL⁻¹) and could be a useful indicator for enteral formulation classification.     

葡萄酒中游离氨基酸的高效液相色谱法测定

采用邻苯二甲醛衍生化法衍生葡萄酒中的游离氨基酸，以反相高效液相色谱法对葡萄酒中１８种氨基酸进行了测定，方法简单、迅速，２５ｍｉｎ即可完成１８种氨基酸的分离。精密度及回收率实验结果令人满意。     

Investigations of molecular interactions in propionic acid–N,N-dimethyl formamide binary system—FTIR study

FTIR spectra of propionic acid (PA), N,N-dimethyl formamide (DMF) and its binary mixtures with varying molefractions of the PA were recorded in the region 500–3500 cm⁻¹, to investigate the formation of hydrogen bonded complexes in a mixed system. The observed features in ν(CO), δ(OC–N) and ν_as(CN) of DMF, ν(CO) and ν(CO) of PA have been explained in terms of the hydrogen bonding interactions between DMF and PA and dipole–dipole interaction. The intrinsic bandwidth for the vibrational modes ν_as(CN) and ν(CO) has been elucidated using Bondarev and Mardaeva model.     

Discriminating Amino Resin Paints From Alkyd Resin Paints with Two Kinds of Pigments in Automotive Coatings in Forensic Analysis by FTIR Spectroscopy

The analysis of automotive coatings is important to forensic scientists, especially in the investigation of hit-and-run accidents. Amino resin paints, alkyd resin paints, and polyurethane paints are all popular automotive coatings. In this study, FTIR was employed to investigate these coatings, particular in amino resin paints. IR spectra were tentatively interpreted. The indicative peaks distinguishing amino resin paints (1550 cm^?1) and alkyd resin paints (1600 cm^?1/1580 cm^?1) were summarized. Two kinds of alkyd resin paints (with the Pigment Scarlet Powder and with the Toluidine Red), which were frequently confronted in cases and might readily be read as amino resin paints in IR spectra, were studied and interpreted. The indicative peaks (1619 cm^?1, 776 cm^?1 and 1674 cm^?1, 1494 cm^?1) were selected to discriminate these two kinds of alkyd resin paints from amino resin paints and avoid an incorrect certificate of authenticity. The data in this study can help the forensic scientists identify these three paints accurately, especially in the cases with the interference of the pigments.     

用FTIR测定邻苯二甲酰化壳聚糖的取代度

富立叶红外光谱;定量分析;用FTIR测定邻苯二甲酰化壳聚糖的取代度     

Chiral separation of enantiomers of amino acid derivatives by high-performance liquid chromatography on a norvancomycin-bonded chiral stationary phase

A novel norvancomycin-bonded chiral stationary phase (NVC-CSP) was synthesized by using the chiral selector of norvancomycin. The chiral separation of enantiomers of several dansyl-amino acids by high-performance liquid chromatography (HPLC) in the reversed-phase mode is described. The effects of some parameters, such as organic modifier concentration, column temperature, pH and flow rate of the mobile phase, on the retention and enantioselectivity were investigated. The study showed that ionic, as well as hydrophobic interactions were engaged between the analyte and macrocycle in this chromatographic system. Increasing pH of buffers usually improved the chiral resolution for dansyl--amino-n-butyric acid (Dns-But), dansyl-methionine (Dns-Met) and dansyl-threonine (Dns-Thr), but not for dansyl-glutamic acid (Dns-Glu) which contains two carboxylic groups in its molecular structure. The natural logarithms of selectivity factors (ln ) of all the investigated compounds depended linearly on the reciprocal of temperature (1/T), most processes of enantioseparation were controlled enthalpically. Interestingly, the process of enantioseparaton for dansyl-threonine was enthalpy-controlled at pH of 3.5, while at pH of 7.0, it was entropy-controlled according to thermodynamic parameters Δ_R,SΔH° and Δ_R,SΔS° afforded by Van’t Hoff plots. In order to get baseline separation for all the solutes researched, norvancomycin was also used as a chiral mobile phase additive. In combination with the NVC-CSP, remarkable increases in enanselectivity were observed for all the compounds, as the result of a “synergistic” effect.     

Determination of paracetamol in pharmaceutical formulations using a sequential injection system

A simple method for the rapid determination of paracetamol in pharmaceutical formulations is described. The method involves oxidation of paracetamol by potassium hexacyanoferrate(III) and a subsequent reaction with phenol in the presence of ammonia. The blue complex formed is measured at 630 nm. The system has a sample frequency of 27 samples per h with a detection limit of 0.2 mg l⁻¹. The calibration curve is linear up to 60 mg l⁻¹ with a relative standard deviation of 1.2% (n=10).     

Solid sampling Fourier transform infrared determination of Mancozeb in pesticide formulations

A series of approaches have been assayed for FTIR determination of Mancozeb in several solid commercial fungicides using different calibration strategies. The simplest procedure was based on the use of the ratio between the absorbance of a characteristic band of Mancozeb and that of a KSCN internal standard measured in the FTIR spectra obtained from KBr pellets. It was employed the quotient between peak height absorbance values at 1525 cm⁻¹ for Mancozeb and 2070 cm⁻¹ for KSCN. In these conditions a precision as relative standard deviation (RSD) of 0.6% and a relative accuracy error of 0.8% (w/w) were found. For complex formulations, containing other compounds with characteristic absorption bands at different wavenumbers than Mancozeb, one of them was used as internal reference being employed the standard addition approach. In this case, the Mancozeb bands at 1525 cm⁻¹ or at 1289 cm⁻¹ were employed, being used the ferrocyanide band at 2075 cm⁻¹ as internal reference. RSD values between 0.7-1.4% and a relative accuracy error of 3% (w/w) were found. A third strategy was based on the use of partial least squares (PLS) calibration. A reference set was prepared mixing Mancozeb, Kaolin, Cymoxanil and KBr, being predicted the Mancozeb concentration in pesticide formulations by using the quotient between absorbance bands of Mancozeb and those of Cymoxanil. In these conditions a relative accuracy error of 0.6% (w/w) and a relative standard deviation of 1.3% were found.     

A triazene-based new photolabile linker in solid phase chemistry

An extension of the T2 linker methodology by showing its applicability as a photocleavable linker is reported. Photocleavage was carried out with 355 nm UV laser irradiation (3ω Nd-YAG) in methanol/diethyl ether and is suitable for protected amino acid derivatives, as well as simple small organic molecules including resin-bound biotin. The linker is stable under a wide range of conditions with the exception of strongly acidic media.     

钯与对若丹宁偶氮苯甲酸络合物的固相萃取和光度测定

根据新试剂对若丹宁偶氮苯甲酸(RABA)与钯的显色反应及C18固相萃取小柱对显色络合物的固相萃取,建立了一种测定痕量钯的新方法,在pH为2.0～4.0的HCl-邻苯二甲酸氢钾(HCl-KHP)缓冲介质中,在CTMAB存在下,钯与RABA发生反应形成1:1的稳定络合物,该络合物可用C18固相萃取小柱富集,小柱上富集的络合物用乙醇洗脱后用光度法测定,在富集后的测定液中,络合物最大吸收波长为500 nm,摩尔吸光系数ε=1.36×105 L·mol-1·cm-1,Pd2 量在0.1～1.0 μg/mL内符合比尔定律,方法用于催化剂中钯的测定.