Growth of silver structures on silicon surfaces observed in vivo by scanning tunneling microscopy

Early stages of growth of silver thin films on oriented silicon surfaces Si(1 0 0)2 × 1 and Si(1 1 1)7 × 7 were studied directly during deposition at room temperature by the scanning tunneling microscopy. Single Ag atoms deposited on the Si(1 0 0)2 × 1 surface diffuse too fast on the surface to be imaged by the microscope. Nucleation on C-type defects of the Si(1 0 0)2 × 1 reconstruction has been observed. During further growth, the defects represent stable terminations of silver chains. Ag nanoclusters growing on the Si(1 1 1)7 × 7 surface have been studied as a system with low diffusivity at room temperature. On this surface, presence of effective interaction between Ag clusters and individual Ag atoms in neighboring cells of the reconstruction has been identified. The interaction results in lowering the barrier for Ag atom hopping to an adjacent unit cell occupied by an Ag cluster. Unique possibilities arising from scanning the surface directly during growth are demonstrated.     

Chemical bonding of PTCDA on Ag surfaces and the formation of interface states

We present a detailed investigation of the interface bonding of 3,4,9,10-perylene-tetracarboxylic acid dianhydride (PTCDA) on Ag(1 1 1) and Ag(1 1 0) surfaces by a combination of structural and electronic techniques (SPA-LEED, STM, TPD, UPS, HR-XPS, and NEXAFS) thus obtaining a consistent picture of the adsorption behaviour of PTCDA/Ag in the monolayer regime. The interaction with silver is strong and leads to the formation of new common hybrid orbitals in the monolayer, which are interface states for PTCDA films on Ag, involving at least LUMO, HOMO, and HOMO-1, and the Ag 5s- and 4d-states. This chemisorption is based on a covalent interaction between metal and molecular states, and can unambiguously be distinguished from mere van-der-Waals bonding.     

New tetramer structures in the initial process of Si homoepitaxial growth on Si (0 0 1)

We have studied the interaction between Si ad-dimers in the initial process of Si homoepitaxial growth on Si (0 0 1) surface by molecular dynamics simulations using the Stillinger-Weber potential. The interactions determine the formation of larger clusters from diffusing dimers. We show different pathways for the formation of multiple-dimer clusters and propose two new tetramer structures (T_BB and T_CC) formation by two diffusing dimers interacting. These tetramer structures have been found to be energetically stable with respect to isolated ad-dimers. Moreover, their local bonding configuration is very similar to the B-type step edge which is known to be the favored adsorption site for epitaxial growth. The proposed tetramers may play a crucial role as the nucleus of the new epitaxial layer on Si (0 0 1).     

Fabrication of nanostructures by selective growth of C60 and Si on Si(1 1 1) substrate

Using two types of selective growth, selective C₆₀ growth and selective Si growth, on a common Si(1 1 1) substrate, an array of C₆₀ nanoribbons with controlled values of width and thickness is fabricated. On a surface that has Si(1 1 1)√3 × √3R30°-Ag (referred to as Si(1 1 1)√3-Ag hereafter) and bare Si(1 1 1) regions at the same time, the preferential growth of C₆₀ multilayered film is recognized on the Si(1 1 1)√3-Ag region. The growth of Si selectively occurs on a bare Si(1 1 1) region if the substrate surface has C₆₀-adsorbed and bare Si(1 1 1) regions at the same time. As a demonstration of the use of these selective growths, we fabricate an array of well-isolated C₆₀ nanoribbons, which show a well-ordered molecular arrangement and have sizes of about 40 nm in widths and 3-4 nm in thicknesses.     

Initial oxidation of HF-acid treated Si(1 0 0) surfaces under air exposure studied by synchrotron radiation X-ray photoelectron spectroscopy

Initial oxidation of HF-acid treated Si(1 0 0) surfaces with air exposure has been studied by using synchrotron radiation X-ray photoelectron spectroscopy. We demonstrate that the initial oxidation is explained not by a layer-by-layer process, but by a non-uniform mechanism. Just after dipping a Si substrate in HF-acid and spin-drying, the Si surface is immediately oxidized partly with a coverage of 0.2. It is considered that the non-uniform oxidation takes place at surface defects on H passivated Si surfaces. With increasing the air exposure up to 1 week, we have found that the non-oxidized part is oxidized uniformly at slower rates compared to the beginning. IR absorption spectroscopy with a multiple-internal-reflection geometry clearly indicates the backbond oxidation of surface Si takes place despite the H passivation produced by the HF-acid treatment.     

Evolution of Si0.8Ge0.2 quantum dots during Si encapsulation

Surface structure, determined by scanning tunneling microscopy (STM), surface morphology, determined by atomic force microscopy (AFM), and surface composition, determined by X-ray photoelectron spectroscopy (XPS) of 20.0 nm Si_0.8Ge_0.2 quantum dots formed at 800 °C and encapsulated with 0-10 nm of Si at 500 °C and 800 °C are presented. It is observed that the quantum dot surface morphology changes during the Si encapsulation at 800 °C by the smoothing of the quantum dots. The height of the quantum dots decreases faster than can be accounted for from the amount of Si deposited, indicating that there is movement of material out of the quantum dots during the encapsulation process. Encapsulation at 500 °C results in a retention of the quantum dot surface morphology with increased Ge segregation compared to Si encapsulation at 800 °C. We conclude that the changing surface morphology at 800 °C is not the result of Ge segregation but due to intermixing resulting from the tensile strain of Si depositing on SiGe.     

Perturbation of Ge(1 1 1) and Si(1 1 1)√3α-Sn surfaces by adsorption of dopants

We test the response of the √3 × √3α reconstructions formed by 1/3 monolayer of tin adatoms on silicon and germanium (1 1 1) surfaces upon doping with electrons or holes, using potassium or iodine as probes/perturbers of the initial electronic structures. From detailed synchrotron radiation photoelectron spectroscopy studies we show that doping with either electrons or holes plays a complimentary role on the Si and Ge surfaces and, especially, leads to complete conversion of the Sn 4d two-component spectra into single line shapes. We find that the low binding energy component of the Sn core level for both Si and Ge surfaces corresponds to Sn adatoms with higher electronic charge, than the Sn adatoms that contribute to the core level high binding energy signal. This could be analyzed as Sn adatoms with different valence state.     

Adsorption of organic molecules by photochemical reaction on Cl:Si(1 1 1) and H:Si(1 1 1) evaluated by HREELS

The covalent attachment of alkyl groups to silicon surfaces, via carbon-silicon bond formation, has been attempted using gas-surface reactions starting from Cl-terminated Si(1 1 1) or H:Si(1 1 1) under ultraviolet light irradiation. The formation of Cl-terminated Si(1 1 1) and its resulting stability were examined prior to deposition of organic molecules. High-resolution electron energy loss spectroscopy (HREELS) was utilized for detecting surface-bound adsorbates. The detection of photo-deposited organic species on Cl:Si(1 1 1) from gas-phase CH₄ or CH₂CH₂ was not significant. On H:Si(1 1 1), it was evident that after the photoreaction with gas-phase C₂H₅Cl, C₂H₅ groups were chemically bonded to the surface Si atoms through single covalent bonds. The C₂H₅ groups were thermally stable at temperatures below 600 K. Alkyl monolayers prepared on silicon surfaces by dry process will lead to a new prospective technology of nanoscale fabrication and biochemical applications.     

Growth of Si whiskers by MBE: Mechanism and peculiarities

We analyzed the stress-driven mechanism of MBE Si whisker growth. It is shown that the driving force for MBE whisker growth is determined by the relaxation of elastic energy stored in the overgrown layer L_s due to gold intrusion. In this case the supersaturation is determined by the interplay between elastic stresses and surface energy. The latter is considerably decreased due to decoration of the Si surface by gold resulting in formation of thin liquid Si/Au eutectic layer. This suggests that in our case the Si supersaturation is not an independent growth parameter as it is in the chemical vapor deposition growth method. Instead it is determined by stress in the overgrown Si layer. This approach allows us to explain quite well the growth kinetic and the relationship between the radius and the length of the whiskers. The whisker growth in our case can be considered as a stress relaxation mechanism, where the stress relaxation occurs due to transition from the two-dimensional system to the three-dimensional one.     

Growth of (√3 × √3)-Ag and (1 1 1) oriented Ag islands on Ge/Si(1 1 1) surfaces

We have studied the growth of Ag on Ge/Si(1 1 1) substrates. The Ge/Si(1 1 1) substrates were prepared by depositing one monolayer (ML) of Ge on Si(1 1 1)-(7 × 7) surfaces. Following Ge deposition the reflection high energy electron diffraction (RHEED) pattern changed to a (1 × 1) pattern. Ge as well as Ag deposition was carried out at 550 °C. Ag deposition on Ge/Si(1 1 1) substrates up to 10 ML has shown a prominent (√3 × √3)-R30° RHEED pattern along with a streak structure from Ag(1 1 1) surface. Scanning electron microscopy (SEM) shows the formation of Ag islands along with a large fraction of open area, which presumably has the Ag-induced (√3 × √3)-R30° structure on the Ge/Si(1 1 1) surface. X-ray diffraction (XRD) experiments show the presence of only (1 1 1) peak of Ag indicating epitaxial growth of Ag on Ge/Si(1 1 1) surfaces. The possibility of growing a strain-tuned (tensile to compressive) Ag(1 1 1) layer on Ge/Si(1 1 1) substrates is discussed.     

Effects of electronic confinement and substrate on the low-temperature growth of Pb islands on Si(1 0 0)-2 × 1 surfaces

The growth of Pb films on the Si(1 0 0)-2 × 1 surface has been investigated at low temperature using scanning tunneling microscopy. Although the orientation of the substrate is (1 0 0), flat-top Pb islands with (1 1 1) surface can be observed. The island thickness is confined within four to nine atomic layers at low coverage. Among these islands, those with a thickness of six layers are most abundant. Quantum-well states in Pb(1 1 1) islands of different thickness are acquired by scanning tunneling spectroscopy. They are found to be identical to those taken on the Pb(1 1 1) islands grown on the Si(1 1 1)7 × 7 surface. Besides Pb(1 1 1) islands, two additional types of Pb islands are formed: rectangular flat-top Pb(1 0 0) islands and rectangular three-dimensional (3D) Pb islands, and both their orientations rotate by 90° from a terrace to the adjacent one. This phenomenon implies that the structures of Pb(1 0 0) and 3D islands are influenced by the Si(1 0 0)-2 × 1 substrate.     

Theoretical STM images of alkaline-earth metal adsorbed Si(1 1 1)3 × 2 surfaces

We have performed total-energy calculations to study theoretical scanning tunneling microscopy (STM) images of the Si(1 1 1)3 × 2 surfaces induced by the adsorption of alkaline-earth metals (AEMs). Previously, in a series of works on Ba/Si(1 1 1) system, we have found that the observed Si(1 1 1)3 × 1-Ba LEED phase indeed has a 3 × 2 periodicity with a Ba coverage of 1/6 ML and the HCC substrate structure. Based on results of the Ba case, we proposed that the HCC structure is also adopted for other AEM atoms, which was confirmed by our recent work. In this paper, we mainly report the STM simulations for different AEM systems to compare with existing experimental data. We discuss the difference in the detailed STM images for different AEM adsorbates. Especially, the difference in filled-state images between Mg and other AEM atoms is attributed to the strong Mg-Si interaction.     

Structural analysis of the c(4 × 2) reconstruction in Si(0 0 1) and Ge(0 0 1) surfaces by low-energy electron diffraction

The c(4 × 2) structures in (0 0 1) surfaces of Si and Ge have been studied by low-energy electron diffraction (LEED). Using a proper cleaning method for the Si surface, we were able to observe clear c(4 × 2) LEED patterns up to incident energy of ∼400 eV as well as the Ge surface. Extensive experimental intensity-voltage curves allowed us to optimize the asymmetric dimer model up to the eighth layer (including the dimer layer) in depth in the dynamical LEED calculation. Optimized structural parameters are almost the same for the Si and Ge except for the height of the buckled-up atom of the asymmetric dimer. For the Ge surface, the structural parameters are in excellent agreement with those obtained by a previous theoretical calculation. The tilt angle and bond length of the dimer are 18 ± 1 (19 ± 1)° and 2.4 ± 0.1 (2.5 ± 0.1) Å for the Si(0 0 1) (Ge(0 0 1)), respectively.     

Templated growth of quasi-one dimensional molecular structures on Si(1 1 1)-(4 × 1)-In surface

Self-assembly of quasi-one dimensional pentacene molecular chains are realized on Si(1 1 1) surface using the atomic chain structures of the well-defined Si(1 1 1)-(4 × 1)-In surface reconstruction as templates. It is determined that the molecules are adsorbed between two neighboring In chains with their long axis perpendicular to the chain direction. The molecular chains are grown with periodicity commensurate with the lattice constant in the In atomic chains. Our positive results suggest that this approach might be applied to grow organic hetero-nanostructures on specifically decorated semiconductor surfaces.     

Cooperative growth of nano-islands on Si(1 0 0) surface

By setting up two low temperature regions on a terrace of a vicinal Si(1 0 0)-2 × 1 surface, we have studied growth of nano-islands in the two regions using a kinetic Monte Carlo simulation. At first two islands are formed and grow independently without any supply of atoms from the outside. As the growth proceeds further, two islands are connected with each other by forming a bridge region. After the connection, the growth changes dramatically showing a competitive mode in one stage and a cooperative mode in the other. Two islands grow cooperatively in a sense that a larger island ceases to grow and waits until the size of the other smaller island becomes similar to that of the larger one. When two islands become similar in size, one of the islands grows faster than the other competitively, by accumulating atoms from then smaller one. The origin of the growth mode is analyzed.     

等离子辅助分子束外延技术研究生长在Si(111)衬底的氮化镓pn结

利用等离子辅助分子束外延系统研究了生长在硅(111)衬底的氮化镓pn结,并将其应用于光学器件．硅和镁分别用做n和p掺杂,反射高能电子衍射图像显示氮化镓pn结层具有良好的表面形貌,结层厚度约为0.705 nm,且为六方结构．室温下X射线衍射对称摇摆曲线中(0002)面的ω/2θ显示,半峰宽为0.340,说明氮化镓pn结质量高．另外,在硅和镁掺杂样品中没有A1峰淬灭．光致发光光谱表明pn结样品具有良好的光学性能．镍和铝作为分别作为正面和背面的电极接触应用于光学器件,该器件的电流电压特性显示了典型的异质结整流特性．正向接触镍经过氮气中退火处理10 min,结果表明,600 oC处理的样品比400 oC处理和未经处理的样品具有更高的增益．     

Water adsorption on hydrogenated Si(1 1 1) surfaces

The adsorption of water on the hydrogen terminated Si(1 1 1) surface is studied by means of first-principles calculations as well as contact angle measurements. Possible initial adsorption configurations for single water molecules and the potential energy surface are calculated. Only small adsorption energies of the order of meV are predicted. Calculations for higher coverage show that the water-water interactions are stronger than the water-surface bonding. The contact angle formed between a water droplet on the surface approximated from the total-energy calculations amounts to 88°, while our measured value is 91°.     

Configuration of pentacene (C22H14) films on Si(1 0 0)-2 × 1 studied by NEXAFS

Pentacene films on Si(1 0 0)-(2 × 1) surface at 300 K were investigated using near edge X-ray absorption fine structure (NEXAFS) at the carbon K-edge. NEXAFS spectra show that pentacene molecules are chemisorbed on the Si(1 0 0)-(2 × 1) surface for monolayer with flat-laying and predominantly physisorbed on the Si(1 0 0)-(2 × 1) surface for multilayer films with an upright molecular orientation. Absorption angle of pentacene molecules were measured through π^∗ transition. The angles between the double bond and the silicon surface were 35-55°, 65° and 76° at monolayer, 24 and 48 nm pentacene deposited on the Si(1 0 0) surface, respectively. We observed that the intermediate flat-laying phase is favored for monolayer coverage, while the films of molecules standing perpendicular to the Si(1 0 0) surface are favored for multilayer coverage.     

Layer-resolved photoelectron diffraction from Si(0 0 1) and GaAs(0 0 1)

Photoelectron diffraction in the layer-resolved mode brings more detailed information about local atomic arrangement than is obtained in the standard mode. This is demonstrated in crystals with diamond and zinc-blende structures, both for unpolarized photon excitation as well as for circularly polarized excitation. The full angular distributions of photoemission intensities are evaluated for large atomic clusters representing ideally truncated surfaces of Si(0 0 1) and GaAs(0 0 1). Highly structured layer-resolved patterns enable a more detailed understanding of the standard mode outcomes. Photoelectron intensities from atomic layers placed at different depths under the crystal surface provide direct evidence about electron attenuation and its anisotropy in crystals.     

Germanium growth on Br-terminated Si(1 0 0)

The consequences of Ge deposition on Br-terminated Si(1 0 0) were studied with scanning tunneling microscopy at ambient temperature after annealing at 650 K. One monolayer of Br was sufficient to prevent the formation of Ge huts beyond the critical thickness of 3 ML. This is possible because Br acts as a surfactant whose presence lowered the diffusivity of Ge adatoms. Hindered mobility was manifest at low coverage through the formation of short Ge chains. Further deposition resulted in the extension and connection of the Ge chains and gave rise to the buildup of incomplete layers. The deposition of 7 ML of Ge resulted in a rough surface characterized by irregularly shaped clusters. A short 800 K anneal desorbed the Br and allowed Ge atoms to reorganize into the more energetically favorable “hut” structures produced by conventional Ge overlayer growth on Si(1 0 0).