In situ scanning tunneling microscopy studies of bimetallic cluster growth: Pt-Rh on TiO2(1 1 0)

The growth of Pt on clusters on TiO₂(1 1 0) in the presence and absence of Rh was investigated by scanning tunneling microscopy (STM) for Pt deposited on top of 0.3 ML Rh clusters (Rh + Pt). In situ STM studies of Pt growth at room temperature show that bimetallic clusters are produced when Pt is directly incorporated into existing Rh clusters or when newly nucleated clusters of pure Pt coalesce with existing Rh clusters. Low energy ion scattering experiments demonstrate that Rh is still present at the surface of the clusters even after deposition of 2 ML of Pt, indicating that Rh atoms can diffuse to the cluster surface at room temperature. Rh clusters were found to seed the growth of Pt clusters at room temperature as well as 100 K and 450 K. Furthermore, clusters as large as 100 atoms were observed to be mobile on the surface at room temperature and 450 K, but not at 100 K. Pt deposition at 100 K exhibited more two-dimensional cluster growth and higher cluster densities compared to room temperature experiments due to the lower diffusion rate. Increased diffusion rates at 450 K resulted in more three-dimensional cluster growth and lower densities for pure Pt growth, but cluster densities for Pt + Rh growth were the same as at room temperature.     

CO adsorption on Ni(1 0 0): Evidences for a weakly bound phase by HREELS measurements

The vibrational properties of CO on Ni(1 0 0) were investigated by high resolution electron energy loss spectroscopy. Loss measurements were performed as a function of temperature and CO exposures. At room temperature, regardless of CO coverage, we found stretching energies at 250 meV and 240 meV, assigned to CO at atop and bridge sites, respectively. At low temperature and for CO exposures lower than 0.6 L, the loss spectra showed a single stretching peak at 240 meV which is assigned to CO at bridge sites. For higher doses, a new intense peak at 260 meV appeared in the loss spectra. The rise of this new loss strongly influenced the intensity of the peak at 240 meV suggesting the occurrence of dipole couplings between adjacent CO molecules. This unusual high stretching frequency leads us to assign the peak at 260 meV to the stretching vibration of CO molecules which are weakly bonded to the Ni surface. We suggest that the formation of this phase is due to an electronic effect arising from a reduced back donation of electrons into the empty π orbital of CO.     

Infrared reflection absorption spectral study for CO adsorption on Pd/Pt(1 1 1) bimetallic surfaces

Infrared reflection absorption spectroscopy (IRRAS) was used to investigate carbon monoxide (CO) adsorption on 0.15 nm-thick-0.6 nm-thick Pd-deposited Pt(1 1 1) bimetallic surfaces: Pd_x/Pt(1 1 1) (where x is the Pd thickness in nanometers) fabricated using molecular beam epitaxial method at substrate temperatures of 343 K, 473 K, and 673 K. Reflection high-energy electron diffraction (RHEED) measurements for Pd_0.15-0.6 nm/Pt(1 1 1) surfaces fabricated at 343 K showed that Pd grows epitaxially on a clean Pt(1 1 1), having an almost identical lattice constant of Pt(1 1 1). The 1.0 L CO exposure to the clean Pt(1 1 1) at room temperature yielded linearly bonded and bridge-bonded CO-Pt bands at 2093 and 1855 cm⁻¹. The CO-Pt band intensities for the CO-exposed Pd_x/Pt(1 1 1) surfaces decreased with increasing Pd thickness. For Pd_0.3 nm/Pt(1 1 1) deposited at 343 K, the 1933 cm⁻¹ band caused by bridge-bonded CO-Pd enhanced the spectral intensity. The linear-bonded CO-Pt band (2090 cm⁻¹) almost disappeared and the bridge-bonded CO-Pd band dominated the spectra for Pd_0.6 nm/Pt(1 1 1). With increasing substrate temperature during the Pd depositions, the relative band intensities of the CO-Pt/CO-Pd increased. For the Pd_0.3 nm/Pt(1 1 1) deposited at 673 K, the linear-bonded CO-Pt and bridge-bonded CO-Pd bands are located respectively at 2071 and 1928 cm⁻¹. The temperature-programmed desorption (TPD) spectrum for the 673 K-deposited Pd_0.3 nm/Pt(1 1 1) showed that a desorption signal for the adsorbed CO on the Pt sites decreased in intensity and shifted ca. 20 K to a lower temperature than those for the clean Pt(1 1 1). We discuss the CO adsorption behavior on well-defined Pd-deposited Pt(1 1 1) bimetallic surfaces.     

Formation and structure of a (√19 × √19)R23.4°-Ge/Pt(1 1 1) surface alloy

An ordered (√19 × √19)R23.4°-Ge/Pt(1 1 1) surface alloy can be formed by vapor depositing one-monolayer Ge on a Pt(1 1 1) substrate at room temperature and subsequently annealing at 900-1200 K. The long-range order of this structure was observed by low energy electron diffraction (LEED) and confirmed by scanning tunneling microscopy (STM). The local structure and alloying of vapor-deposited Ge on Pt(1 1 1) at 300 K was investigated by using X-ray Photoelectron Diffraction (XPD) and low energy alkali ion scattering spectroscopy (ALISS). XPS indicates that Ge adatoms are incorporated to form an alloy surface layer at ∼900 K. Results from XPD and ALISS establish that Ge atoms are substitutionally incorporated into the Pt surface layer and reside exclusively in the topmost layer, with excess Ge diffusing deep into the bulk of the crystal. The incorporated Ge atoms at the surface are located very close to substitutional Pt atomic positions, without any corrugation or “buckling”. Temperature Programmed Desorption (TPD) shows that both CO and NO adsorb more weakly on the Ge/Pt(1 1 1) surface alloy compared to that on the clean Pt(1 1 1) surface.     

CO adsorption and dissociation on iron oxide supported Pt particles

We studied CO adsorption on Pt particles deposited on well-ordered Fe₃O₄(1 1 1) thin films grown on Pt(1 1 1) by temperature programmed desorption (TPD). A highly stepped Pt(1 1 1) surface produced by ion sputtering and annealing at 600 K was studied for comparison. Structural characterization was performed by scanning tunneling microscopy and Auger electron spectroscopy. The TPD spectra revealed that in addition to the desorption peaks at ∼400 and 480 K, assigned to CO adsorbed on Pt(1 1 1) facets and low-coordination sites respectively, the Pt nanoparticles annealed at 600 K exhibit a desorption state at ∼270 K. This state is assigned to initial stages of strong metal support interaction resulting in partial Fe-Pt intermixing. On both Pt/Fe₃O₄(1 1 1) and stepped Pt(1 1 1) surfaces CO is found to dissociate at 500 K. The results suggest that CO dissociation and carbon accumulation occur on the low-coordinated Pt sites.     

Probing the interactions of Pt, Rh and bimetallic Pt-Rh clusters with the TiO2(1 1 0) support

Pt, Rh, and Pt-Rh clusters on TiO₂(1 1 0) have been investigated by scanning tunneling microscopy (STM), soft X-ray photoelectron spectroscopy (sXPS), and low energy ion scattering (LEIS). The surface compositions of Pt-Rh clusters are Pt-rich (66-80% Pt) for room temperature deposition of both 2 ML of Pt on 2 ML of Rh (Rh + Pt) and 2 ML of Rh on 2 ML of Pt (Pt + Rh). Pt and Rh atoms readily diffuse within the clusters at room temperature, and although diffusion is slower at 240 K, intermixing of Pt and Rh still occurs. The binding energies of surface and bulk states for Rh(3d_5/2) and Pt(4f_7/2) can be distinguished in sXPS studies, and an analysis of these spectra indicates that the surface compositions of the Pt + Rh and Rh + Pt clusters are similar at room temperature but not identical. In addition to sintering, the pure Pt, pure Rh and Pt-Rh clusters become completely encapsulated by titania upon heating to 700 K. sXPS investigations show that annealing the clusters to 850 K induces reduction of titania support to Ti⁺² and Ti⁺³, with the extent of reduction being the greatest for Pt, the least for Rh and intermediate for Pt-Rh. We propose that TiO₂ is reduced at the metal-titania interface on top of the clusters, not at the base of the clusters. Furthermore, the extent of titania reduction is greater for metal clusters with weaker metal-oxygen bonds because oxygen atoms are less likely to migrate to the top of the clusters, and therefore the encapsulating titania is oxygen-deficient.     

Synthesis of ZnO nanowires by pulsed laser deposition in furnace

ZnO nanowires were fabricated on Au coated (0 0 0 1) sapphire substrates by using a pulsed Nd:YAG laser with a ZnO target in furnace. ZnO nanowires have various sizes and shapes with a different substrate position inside a furnace. The length and the diameter of these ZnO nanowires were around 3-4 μm and 120-200 nm, respectively, confirmed by scanning electron microscopy (SEM). The diameter control of the nanowires was achieved by varying the position of substrates. The ultraviolet emission of nanowires from the near band-edge emission (NBE) was observed at room temperature. The formation mechanism and the effect of different position of substrates on the structural and optical properties of ZnO nanowires are discussed.     

In-situ study of the catalytic oxidation of CO on a Pt(1 1 0) surface using ambient pressure X-ray photoelectron spectroscopy

CO and O₂ co-adsorption and the catalytic oxidation of CO on a Pt(1 1 0) surface under various pressures of CO and O₂ (up to 250 mTorr) are studied using ambient pressure X-ray photoelectron spectroscopy (APXPS) and mass spectrometry. There is no surface oxide formation on Pt under our reaction conditions. CO oxidation in this pressure (<500 mTorr), O₂ to CO ratio (<10), and temperature (150 °C) regime is consistent with the Langmuir-Hinshelwood reaction mechanism. Our findings provide in-situ surface chemical composition data of the catalytic oxidation of CO on Pt(1 1 0) at total pressures below 1 Torr.     

Room temperature two-terminal characteristics in silicon nanowires

Quantum effects in silicon nanowires due to one-dimensional carrier confinement were observed at room temperature. Electrical transport properties were measured on narrow thin-silicon-on-insulator wires that were defined by e-beam lithography and further narrowed and thinned down by oxidation to a final thickness of around 3 nm, and a width of 29 nm. The room temperature current-voltage characteristics of the resulting silicon nanowires are shown to exhibit a zero current state may be due to the occurrence of Coulomb blockade.     

Carbon monoxide adsorption on Co deposited Pt(1 0 0)-hex: IRRAS and LEED investigations

Infrared reflection absorption spectroscopy (IRRAS) was used to investigate carbon monoxide (CO) adsorption on Pt(1 0 0) surfaces deposited with Co layers with different thicknesses. Pt(1 0 0) surfaces cleaned in ultrahigh vacuum showed surface reconstruction, i.e., Pt(1 0 0)-hex: two absorption bands ascribable to adsorbed CO on the 1 × 1 surface and hex domains emerge at 2086 and 2074 cm⁻¹, respectively, after 1.0 L CO exposure. Deposition of a 0.3-nm-thick-Co layer on Pt(1 0 0)-hex at 333 K changes the low-energy electron diffraction (LEED) pattern from hex to p(1 × 1), indicating that the deposited Co lifts the reconstruction. The IRRAS spectrum for 1.0-L-CO-exposed Co_0.3 nm/Pt(1 0 0)-hex fabricated at 333 K yields a single absorption band at 2059 cm⁻¹. For Co_0.3 nm/Pt(1 0 0)-hex fabricated at 693 K, the LEED pattern shows a less-contrasted hex and the pattern remains nearly unchanged even after CO exposure of 11 L, although only 1.0 L CO exposure to Pt(1 0 0)-hex lifts the surface reconstruction. A Co_0.3 nm/Pt(1 0 0)-hex surface fabricated at 753 K exhibits an absorption band at 2077 cm⁻¹, which is considered to originate from CO adsorbed on the Pt-enriched surface alloy. Co_0.3 nm/Pt(1 0 0)-hex surfaces fabricated above 773 K show a clear hex-reconstructed LEED pattern, and the frequencies of the adsorbed CO bands are comparable to those of Pt(1 0 0)-hex, indicating that the deposited Co atoms are diffused near the surface region. The outermost surface of the 3.0-nm-thick-Co-deposited Pt(1 0 0)-hex is composed of Pt-Co alloy domains even at a deposition temperature of 873 K. Based on the LEED and IRRAS results, the outermost surface structures of Co_x/Pt(1 0 0)-hex are discussed.     

Effects of predosed oxygen and hydrogen on CO adsorption on Ni(1 0 0)

We present the results of high-resolution electron energy loss experiments on (CO/O)/Ni(1 0 0) and (CO/H)/Ni(1 0 0) systems. Oxygen and hydrogen interact differently with Ni(1 0 0) surface, nevertheless, both species do not affect to a great extent the vibrational properties of CO. A phase of CO molecules weakly bonded to the surface and unaffected by coadsorbed oxygen and hydrogen, is found. Coverage of 0.5 ML of predosed oxygen chemically passivates the Ni(1 0 0) surface and inhibits any CO adsorption at room temperature. CO sites are unambiguously determined for each predosed Ni(1 0 0) surface.     

Aligned growth of ZnO nanowires by NAPLD and their optical characterizations

Not only vertically aligned ZnO nanowires but also horizontally aligned ZnO nanowires have been successfully grown on the annealed (0 0 0 1) c-cut and (1 1 2 0) a-cut sapphire substrates, respectively using catalyst-free nanoparticle-assisted pulsed-laser ablation deposition (NAPLD). The as-synthesized ZnO nanowires exhibit an ultraviolet emission at around 390 nm and the absent green emission under room temperature. The single ZnO nanowire was collected in the electrode gap by dielectrophoresis (DEP). Under the optical pumping, the single ZnO nanowire exhibited UV emission at around 390 nm with several sharp peaks whose energy spacings are almost constant, which greatly differs from the broad UV emission of the film with many nanowires, suggesting ZnO nanowires as candidates for laser media. The single ZnO nanowire showed polarized photoluminescence (PL). The as-synthesized ZnO nanowires could find many interesting applications in short-wavelength light-emitting diode (LED), laser diode and gas sensor.     

An IRAS study of CO bonding on Sn/Pt(1 1 1) surface alloys at maximal pressures of 10 Torr

The adsorption of CO on Pt(1 1 1), (2 × 2) and (√3 × √3)R30° Sn/Pt(1 1 1) surface alloys has been studied using temperature programmed desorption (TPD), low energy electron diffraction (LEED) and infrared reflection adsorption spectroscopy (IRAS). The presence of Sn in the surface layer of Pt(1 1 1) reduces the binding energy of CO by a few kcal/mol. IRAS data show two C-O stretching frequencies, ∼2100 and ∼1860 cm⁻¹, corresponding to atop and bridge bonded species, respectively. Bridge bonded stretching frequencies are only observed for Pt(1 1 1) and (2 × 2) Sn/Pt(1 1 1) alloy surfaces. A slight coverage dependence of the vibrational frequencies is observed for the three surfaces. High pressure IRAS experiments over a broad temperature range show no indication of bridge bonded CO on any of the three surfaces. Direct CO adsorption on Sn sites is not observed over the measured temperature and pressure ranges.     

RAIRS studies of CO adsorption on Pd/CeO2−x(1 1 1)/Pt(1 1 1)

Reflection absorption infrared spectroscopy (RAIRS) has been used to investigate the adsorption of CO on CeO_2−x-supported Pd nanoparticles at room temperature. The results show that when CeO_2−x is initially grown on Pt(1 1 1), a small proportion of the surface remains as bare Pt sites. However, when Pd is deposited onto CeO_2−x/Pt(1 1 1), most of the Pd grows directly on top of the CeO_2−x(1 1 1). RAIR spectra of CO adsorption on 1 ML Pd/CeO_2−x/Pt(1 1 1) show a broad CO-Pd band, which is inconsistent with a single crystal Pd surface. However, the 5 ML and 10 ML Pd/CeO_2−x/Pt(1 1 1) spectra show vibrational bands consistent with the presence of Pd(1 1 1) and (1 0 0) faces, suggesting the growth of Pd nanostructures with well defined facets.     

Template preparation of Pt nanowire array electrode on Ti/Si substrate for methanol electro-oxidation

Platinum (Pt) nanowire array electrode is obtained by dc electrodeposition of Pt into the pores of anodic aluminum oxide (AAO) template on Ti/Si substrate. Transmission electron microscope (TEM) examination shows all the nanowires have uniform diameter of about 30 nm. The brush shapes Pt nanowire array electrode can be seen clearly by field emission scanning electron microscope (FESEM). Pt nanowire array electrode gives the X-ray diffraction (XRD) pattern of face-centered cubic (fcc) crystal structure. The electro-oxidation of methanol on this electrode is investigated at room temperature by cyclic voltammetry. The results demonstrated that the Pt nanowire array electrode will have good potential applications in portable power sources.     

Adsorption properties of CO on low-index Pt3Sn surfaces

The adsorption properties of CO on Pt₃Sn were investigated by utilizing quantum mechanical calculations. The (1 1 1), (1 1 0) and (0 0 1) surfaces of Pt₃Sn were generated with all possible bulk terminations, and on these terminations all types of active sites were determined. The adsorption energies and the geometries of the CO molecule at those sites were found. Those results were compared with the results obtained from the adsorption of CO on similar sites of Pt(1 1 1), Pt(1 1 0) and Pt(0 0 1) surfaces. The comparison reveals that adsorption of CO is stronger on Pt surfaces; this may be the reason why catalysts with Pt₃Sn phase do not suffer from CO posioning in experimental works. Aiming to understand the interactions between CO and the metal adsorption sites in detail, the local density of states (LDOS) profiles were produced for atop-Pt adsorption, both for the carbon end of CO for its adsorbed and free states, and for the Pt atom of the binding site. LDOS profiles of C of free and adsorbed CO and Pt for corresponding pure Pt surfaces, Pt(1 1 1), Pt(1 1 0) and Pt(0 0 1) were also obtained. The comparison of the LDOS profiles of Pt atoms of atop adsorption sites on the same faces of bare Pt₃Sn and Pt surfaces showed the effect of alloying with Sn on the electronic properties of Pt atoms. Comparison of LDOS profiles of the C end of CO in its free and atop adsorbed states on Pt₃Sn and LDOS of Pt on bare and CO adsorbed Pt₃Sn surface were used to clear out the electronic changes occurred on CO and Pt upon adsorption. The study showed that (i) inclusion of a Sn atom at the adsorption site structure causes dramatic decrease in stability which limits the number of possible CO adsorption sites on Pt₃Sn surface, (ii) the presence of Sn causes angles different from 180° for M-C-O orientation, (iii) the presence of Sn in the neighborhood of Pt on which CO is adsorbed causes superposition of the 5σ/1π derived-state peaks at the carbon end of CO and changes in adsorption energy of CO, (iv) Sn present beneath the adsorption site strengthens the CO adsorption, whereas neighboring Sn on the surface weakens it for all Pt₃Sn surfaces tested and (v) the most stable site for CO adsorption is the atop-Pt site of the mixed atom termination of Pt₃Sn(1 1 0).     

Synthesis and field emission properties of GaN nanowires

Gallium nitride (GaN) nanowires grown on nickel-coated n-type Si (1 0 0) substrates have been synthesized using chemical vapor deposition (CVD), and the field emission properties of GaN nanowires have been studied. The results show that (1) the grown GaN nanowires, which have diameters in the range of 50-100 nm and lengths of several micrometers, are uniformly distributed on Si substrates. The characteristics of the grown GaN nanowires have been investigated using X-ray diffraction (XRD) and transmission electron microscopy (TEM), and through these investigations it was found that the GaN nanowires are of a good crystalline quality (2) When the emission current density is 100 μA/cm², the necessary electric field is an open electric field of around 9.1 V/μm (at room temperature). The field enhancement factor is ∼730. The field emission properties of GaN nanowires films are related both to the surface roughness and the density of the nanowires in the film.     

Ammonia sensing characteristics of ZnO nanowires studied by quartz crystal microbalance

The ZnO nanowires have been prepared and studied as the sensing element for the detection of ammonia. The ZnO nanowires were first synthesized by evaporating high purity zinc pellets at 900 °C and then distributed onto the electrode surfaces of quartz crystals at room temperatures. Gas sensitive properties of ZnO nanowires layer were studied in terms of the quartz crystal microbalance (QCM) at room temperature. It is found that the obtained response of the sensors varied with the thickness of the ZnO nanowires layer. ZnO nanowires showed high sensitivity to ammonia in the range of 40-1000 ppm. The response time of the sensor was as fast as ∼5 s at any concentration (40-1000 ppm) of ammonia gas. The ZnO nanowires-coated sensors have a good frequency stability and reproducibility. All results demonstrated that the ZnO nanowire was a potential gas sensing material for practical use.     

Magnetic coupling in Co1−xPtx (x>0.5) nanowires electrodeposited on an AAO template

Thirty nanometer diameter Co-Pt nanowires of different composition were fabricated by electrodepositing the Co and Pt atoms to nanoporous anodized aluminium oxide (AAO) templates. The structure and magnetic properties are studied by transmission electron microscopy (TEM), induction-coupled plasma spectrometer (ICP), X-ray diffraction (XRD) and vibrating sample magnetometer (VSM). The as deposited nanowires with Pt content about 50 at.% present a single ferromagnetic phase of fcc CoPt. When the Pt content of the nanowires varies from about 55 to about 75 at.%, the nanowires include a soft phase of fcc CoPt₃ and a relatively hard phase of fcc CoPt and the two phases are separate as seen from the hysteresis loops. After annealing to 600 °C, the two phases coupled completely and the coupled phase has the same coercivity as the original hard one.     

Carbon films grown on Pt(1 1 1) as supports for model gold catalysts

Carbon films were grown on a Pt(1 1 1) single crystal by ethylene decomposition at elevated temperatures (1000-1300 K). Depending on the preparation conditions, different carbon structures formed on the metal surface such as flat and curved graphitic layers, carbon particles and carbon nanowires. Although these carbon films exhibited a high density of surface defects, gold interacted only weakly with the carbon surface. CO adsorption on the Au/carbon systems was very similar to that observed for various Au/oxide systems previously studied. This finding strongly indicates that CO adsorption on gold is essentially independent of the nature of support.