A resonant photoemission study of the Ce and Ce-oxide/Pd(1 1 1) interfaces

We have investigated the Ce 4f electronic states in the Ce/Pd(1 1 1) and Ce-oxide/Pd(1 1 1) systems, using resonant photoemission (Ce 4d → 4f transitions), and XPS to understand Pd-Ce interactions in ultra thin layers of cerium and ceria deposited on Pd(1 1 1). Cerium deposited on Pd(1 1 1) at room temperature forms surface Ce-Pd alloys with Ce rich character, while a Pd rich Ce-Pd alloy is formed by heating to 700 °C. A modification of the chemical state of Ce can also be seen after oxygen exposure. RPES provides evidence that Ce-oxide layers deposited on Pd(1 1 1) have a CeO₂ (Ce⁴⁺) character, however a net contribution of the Ce³⁺ states is also revealed. The Ce³⁺ states have surface character and are accompanied by oxygen vacancies. Heating to 600 °C causes Ce-oxide reduction. A significant shift of Pd 4d-derived states, induced by Pd 4d and Ce 4f hybridization, was observed. The resonant features in the valence band corresponding to Ce⁴⁺, Ce³⁺ and Ce⁰ states have been investigated for various Pd−Ce(CeO_x) coverages.     

Role of final states in photoemission from Al(1 1 1)

Enhancement of surface state peaks in angle resolved ultraviolet photoelectron spectra (ARUPS) from the Al(1 1 1) surface is studied experimentally and theoretically within the one-step model of photoemission. The resonant enhancement of the surface state emission is explained by the crucial role of elastic scattering of the outgoing electron. Dipole transitions to evanescent states in the final bands of the crystal are shown to determine photoemission at the resonant photon energy. The band structure based explanation is confirmed by the measurements of electron reflectivity and of the fine structure of valence band spectra. The surface sensitivity of ARUPS is shown to depend strongly on the complex band structure of the crystal and to be finely tunable by the choice of photoemitted electron energy.     

Theoretical study of hydrogen adsorption on the GaN(0 0 0 1) surface

Ab initio density functional theory, using the B3LYP hybrid functional with all-electron basis sets, has been applied to the adsorption of H on the (0 0 0 1) surface of wurtzite GaN. For bulk GaN, good agreement is obtained with photoemission and X-ray emission data for the valence band and for the Ga 3d and N 2s shallow core levels. A band gap of E_g = 4.14 eV is computed vs the experimental value (at 0 K) of 3.50 eV. A simple model, consisting of a (2 × 2) structure with 3/4-monolayer (ML) of adsorbed H, is found to yield a density of states in poor agreement with photoemission data for H adsorbed on surfaces prepared by ion bombardment and annealing. A new model, consisting of co-adsorbed Ga (1/4 ML) and H (1/2 ML), is proposed to account for these data.     

A spectro-microscopic study of the reactive phase separation of Au + Pd and O on Rh(1 1 0)

Reorganization of Au + Pd submonolayers on a Rh(1 1 0) surface occurring during the water formation reaction has been observed and characterized by low energy electron microscopy (LEEM) and X-ray photoemission electron microscopy (XPEEM). The results demonstrate segregation of Au + Pd and oxygen into separate surface phases, the morphology and size of the O and Au + Pd patterns being governed by the reaction parameters and adsorbate coverage. At moderate Au + Pd coverages and temperatures in the range 760-860 K, lamellar periodic Au + Pd/O micro-structures are generated. The results are interpreted in terms of kinetic and thermodynamic considerations.     

Electronic properties of thin Zn layers on Pd(1 1 1) during growth and alloying

The growth and alloying of thin Zn layers on Pd(1 1 1) was investigated using X-ray and ultraviolet photoelectron spectroscopy as well as low energy electron diffraction and correlated with density functional calculations. At 105 K, the formation of a pseudomorphic Zn monolayer is observed. Upon heating this layer to 550 K or upon deposition of 1 ML at 550 K, an ordered p(2 × 1) PdZn surface alloy with a Pd:Zn ratio of ∼1:1 is formed, with a characteristic Pd 3d_5/2 peak at a binding energy of ∼335.6 eV. For deposition of 3 ML Zn at 550 K or by heating 3 ML, deposited at low temperature, to 500 or 600 K, a PdZn alloy with a Pd:Zn ratio of again ∼1:1 is found in the surface region, with a Pd 3d_5/2 peak at ∼335.9 eV; the direct preparation at 550 K leads to a more homogeneous and better ordered alloy. The valence band spectrum of this alloy with a low density of states at the Fermi level and pronounced maxima due to the “Pd 4d” band at ∼2.4 and 3.9 eV closely resembles the spectrum of Cu(1 1 1), in good agreement with the calculated density of states for a PdZn alloy of 1:1 stoichiometry. The shift of the “Pd 4d” band to higher binding energies as compared to Pd(1 1 1) indicates a charge transfer from Zn to the Pd 4d levels. Overall, the similarity between the ultraviolet photoelectron spectra for the PdZn alloy and for Cu(1 1 1) is taken as explanation for the similar chemical activity of both systems in methanol steam reforming.     

Surface composition and structure of palladium ultra-thin films deposited on Ni(1 1 1)

Ultra-thin palladium films deposited on the Ni(1 1 1) surface were characterized by X-ray photoelectron spectroscopy (XPS), low-energy electron diffraction (LEED) and X-ray photoelectron diffraction (XPD). For low coverage, LEED shows a (1 × 1) pattern similar to that of the substrate. For intermediate coverage, the LEED pattern displays extra spots around the main (1 × 1) spots, resembling a Moiré coincidence pattern, probably associated with the formation of Pd bi-dimensional islands oriented in different directions on the Ni(1 1 1) surface. The results obtained by XPS and XPD corroborate this finding. The LEED pattern displays this structure up to 500 °C. Annealing at 650 °C brings back the (1 × 1) pattern, which is associated with a Pd island coalescence and alloy formation by Pd diffusion in the first atomic layers of the Ni(1 1 1). In this paper we present a detailed study of this surface structure via a comparison between XPD experiment and theory.     

Structural study of Co/Pd(1 1 1) and CO/Co/Pd(1 1 1) by surface X-ray absorption fine structure spectroscopy

The structure of the Co thin films on Pd(1 1 1) and the effect of the CO adsorption on Co thin films were studied by Co K-edge surface X-ray absorption fine structure (XAFS). The polarization dependences of the X-ray absorption near edge structure (XANES) and extended X-ray absorption fine structure (EXAFS) spectra indicate that Co thin films grow in the fcc stacking mode on Pd(1 1 1) up to 12 ML. The analysis of the nearest neighbor shell shows little mechanical strain at the interface, indicating that Co atom does not grow pseudomorphically on Pd(1 1 1). There is no alloy-like structure at the interface. CO adsorption causes no structural change of the Co thin films but modifies the Co surface electronic state. These structural studies provide deep insight in the magnetic property of the Co thin films on Pd(1 1 1).     

Characteristic energy band values and electron attenuation length of a chemical-vapor-deposition diamond (0 0 1)2 × 1 surface

The characteristic energy band values such as the Fermi-level position with respect to valence band top for a boron-doped p-type hydrogen-terminated chemical-vapor-deposition (CVD) diamond (0 0 1)2 × 1 surface and for a clean CVD diamond (0 0 1)2 × 1 surface have been determined by a new method with an accuracy of ±0.02 eV. The electron attenuation length for the clean diamond (0 0 1)2 × 1 surface for the electron kinetic energy of C 1s X-ray photoemission peak by Mg Kα excitation is experimentally determined to be 2.1-2.2 nm. These values are compared and discussed with the previously reported experimental and simulation values.     

Pd, Co and Co-Pd clusters on the ordered alumina film on NiAl(1 1 0): Contact angle, surface structure and composition

We have investigated the structure and morphology of Co and Pd clusters grown at room temperature on an alumina film on NiAl(1 1 0) by scanning tunneling microscopy, low energy ion scattering and Auger electron spectroscopy. We have also studied the clusters after annealing to 300 °C and Pd clusters deposited at 300 °C. Mixed Co-Pd clusters obtained by sequential deposition at room temperature were also studied. Pure Co deposited at room temperature forms a single type of clusters, most or all of them with close-packed planes parallel to the oxide surface. Their shape can be approximated by truncated spheres with a high contact angle of 115-125°. These clusters are stable upon annealing up to 300 °C.Pd clusters deposited at room temperature grow in two different modes. At the reflection domain boundaries the clusters grow in their thermodynamically favorable shape. The clusters do not have a single crystallographic orientation and their shape can be approximated by a truncated sphere with a high contact angle of about 110°, especially at very low coverages (below 0.05 ML). At the antiphase domain boundaries, the Pd clusters grow in (1 1 1) orientation and on some of them small (1 1 1) facets appear at their tops already at low coverages. For higher coverages of Pd, the majority of Pd clusters are rather flat with a large Pd(1 1 1) facet on top. The clusters’ shape at the antiphase domain boundaries differs from the thermodynamically favorable one, due to kinetic limitations, especially at higher coverages. Annealing the Pd clusters to 300 °C leads to re-structuring of these Pd clusters. They transform into higher and more rounded clusters and a thin disordered alumina film is formed on top of the clusters. When Pd is deposited at 300 °C, about 16% of the Pd clusters have a steep slope and rounded tops. The rest of the Pd forms lower clusters, goes subsurface and is covered by a disordered alumina film. When Co and Pd are deposited sequentially, Pd covers the Co clusters forming a shell. The resulting mixed clusters are still truncated spheres with a lowered contact angle. For deposition in the reverse order (first Pd and then Co) we found that Co forms an alloy with Pd already at room temperature.     

Layer-resolved photoelectron diffraction from Si(0 0 1) and GaAs(0 0 1)

Photoelectron diffraction in the layer-resolved mode brings more detailed information about local atomic arrangement than is obtained in the standard mode. This is demonstrated in crystals with diamond and zinc-blende structures, both for unpolarized photon excitation as well as for circularly polarized excitation. The full angular distributions of photoemission intensities are evaluated for large atomic clusters representing ideally truncated surfaces of Si(0 0 1) and GaAs(0 0 1). Highly structured layer-resolved patterns enable a more detailed understanding of the standard mode outcomes. Photoelectron intensities from atomic layers placed at different depths under the crystal surface provide direct evidence about electron attenuation and its anisotropy in crystals.     

Fermi surface and band mapping of the cerium/palladium surface alloy

X-ray and UV excitation angle-resolved photoemission spectroscopy of ultra-thin films of cerium deposited on Pd(1 1 1) single-crystal surface has been carried out. Photoelectron diffraction pattern showed that deposition of 1 ML of Ce led to a formation of Ce-Pd substitutional alloy. Valence band spectra measured with high angular resolution permitted to plot valence band maps and Fermi surface scans and showed formation of surface alloy exhibiting d- and f-electron orbital hybridization. A shift of Pd 4d-derived states to higher binding energy in the Ce-Pd systems was observed.     

RAIRS studies of CO adsorption on Pd/CeO2−x(1 1 1)/Pt(1 1 1)

Reflection absorption infrared spectroscopy (RAIRS) has been used to investigate the adsorption of CO on CeO_2−x-supported Pd nanoparticles at room temperature. The results show that when CeO_2−x is initially grown on Pt(1 1 1), a small proportion of the surface remains as bare Pt sites. However, when Pd is deposited onto CeO_2−x/Pt(1 1 1), most of the Pd grows directly on top of the CeO_2−x(1 1 1). RAIR spectra of CO adsorption on 1 ML Pd/CeO_2−x/Pt(1 1 1) show a broad CO-Pd band, which is inconsistent with a single crystal Pd surface. However, the 5 ML and 10 ML Pd/CeO_2−x/Pt(1 1 1) spectra show vibrational bands consistent with the presence of Pd(1 1 1) and (1 0 0) faces, suggesting the growth of Pd nanostructures with well defined facets.     

Growth and electronic properties of ultra-thin Ag films on Ni(1 1 1)

We studied the growth mode and electronic properties of ultra-thin silver films deposited on Ni(1 1 1) surface by means of scanning tunnelling microscopy (STM) and angle resolved photoemission spectroscopy (ARPES). The formation of the 4d-quantum well states (QWS) was analysed within the phase accumulation model (PAM). The electronic structure of the 1 ML film is consistent with the silver layer which very weakly interacts with the supporting surface. The line-shape analysis of Ag-4d_xz,yz QWS spectrum support the notion of strong localization of these states within the silver layer. The asymmetry of the photoemission peaks implies that the decay of the photo-hole appears to be influenced by the dynamics of the electrons in the supporting surface.     

Correlation of conductivity and angle integrated valence band photoemission characteristics in single crystal iron perovskites for 300 K < T < 800 K: Comparison of surface and bulk sensitive methods

A single crystal monolith of La_0.9Sr_0.1FeO₃ and thin pulsed laser deposited film of La_0.8Sr_0.2Fe_0.8Ni_0.2O₃ were subject to angle integrated valence band photoemission spectroscopy in ultra high vacuum and conductivity experiments in ambient air at temperatures from 300 K to 800 K. Except for several sputtering and annealing cycles, the specimens were not prepared in situ. Peculiar changes in the temperature dependent, bulk representative conductivity profile as a result of reversible phase transitions, and irreversible chemical changes are semi-quantitatively reflected by the intensity variation in the more surface representative valence band spectra near the Fermi energy. X-ray photoelectron diffraction images reflect the symmetry as expected from bulk iron perovskites. The correlation of spectral details in the valence band photoemission spectra (VB PES) and details of the conductivity during temperature variation suggest that valuable information on electronic structure and transport properties of complex materials may be obtained without in situ preparation.     

C-Fe chains due to segregated carbon impurities on Fe(1 0 0)

Bulk carbon impurities segregate at the Fe(1 0 0) surface and, upon thermal annealing, can form metastable surface phases with local and long range order and peculiar electronic properties. We present a surface science study of C-segregated Fe(1 0 0) with scanning tunneling microscopy, angle resolved photoemission, and ab initio calculations of the surface structure and electron states. In particular the c(3√2 × √2) structure, observed for 0.67 atomic layers of C segregated at the iron surface, is found to be due to self-organized carbon stripes made of zig-zag chains. The strong hybridization between C and Fe was observed in ARPES spectra.     

Infrared reflection absorption spectral study for CO adsorption on Pd/Pt(1 1 1) bimetallic surfaces

Infrared reflection absorption spectroscopy (IRRAS) was used to investigate carbon monoxide (CO) adsorption on 0.15 nm-thick-0.6 nm-thick Pd-deposited Pt(1 1 1) bimetallic surfaces: Pd_x/Pt(1 1 1) (where x is the Pd thickness in nanometers) fabricated using molecular beam epitaxial method at substrate temperatures of 343 K, 473 K, and 673 K. Reflection high-energy electron diffraction (RHEED) measurements for Pd_0.15-0.6 nm/Pt(1 1 1) surfaces fabricated at 343 K showed that Pd grows epitaxially on a clean Pt(1 1 1), having an almost identical lattice constant of Pt(1 1 1). The 1.0 L CO exposure to the clean Pt(1 1 1) at room temperature yielded linearly bonded and bridge-bonded CO-Pt bands at 2093 and 1855 cm⁻¹. The CO-Pt band intensities for the CO-exposed Pd_x/Pt(1 1 1) surfaces decreased with increasing Pd thickness. For Pd_0.3 nm/Pt(1 1 1) deposited at 343 K, the 1933 cm⁻¹ band caused by bridge-bonded CO-Pd enhanced the spectral intensity. The linear-bonded CO-Pt band (2090 cm⁻¹) almost disappeared and the bridge-bonded CO-Pd band dominated the spectra for Pd_0.6 nm/Pt(1 1 1). With increasing substrate temperature during the Pd depositions, the relative band intensities of the CO-Pt/CO-Pd increased. For the Pd_0.3 nm/Pt(1 1 1) deposited at 673 K, the linear-bonded CO-Pt and bridge-bonded CO-Pd bands are located respectively at 2071 and 1928 cm⁻¹. The temperature-programmed desorption (TPD) spectrum for the 673 K-deposited Pd_0.3 nm/Pt(1 1 1) showed that a desorption signal for the adsorbed CO on the Pt sites decreased in intensity and shifted ca. 20 K to a lower temperature than those for the clean Pt(1 1 1). We discuss the CO adsorption behavior on well-defined Pd-deposited Pt(1 1 1) bimetallic surfaces.     

Formation, stability and CO adsorption properties of PdAg/Pd(1 1 1) surface alloys

The formation, stability and CO adsorption properties of PdAg/Pd(1 1 1) surface alloys were investigated by X-ray photoelectron spectroscopy (XPS) and by adsorption of CO probe molecules, which was characterized by temperature-programmed desorption (TPD) and high resolution electron energy loss spectroscopy (HREELS). The PdAg/Pd(1 1 1) surface alloys were prepared by annealing (partly) Ag film covered Pd(1 1 1) surfaces, where the Ag films were deposited at room temperature. Surface alloy formation leads to a modification of the electronic properties, evidenced by core-level shifts (CLSs) of both the Pd(3d) and Ag(3d) signal, with the extent of the CLSs depending on both initial Ag coverage and annealing temperature. The role of Ag pre-coverage and annealing temperature on surface alloy formation is elucidated. For a monolayer Ag covered Pd(1 1 1) surface, surface alloy formation starts at ∼450 K, and the resulting surface alloy is stable upon annealing at temperatures between 600 and 800 K. CO TPD and HREELS measurements demonstrate that at 120 K CO is exclusively adsorbed on Pd surface atoms/Pd sites of the bimetallic surfaces, and that the CO adsorption behavior is dominated by geometric ensemble effects, with adsorption on threefold hollow Pd₃ sites being more stable than on Pd₂ bridge sites and finally Pd₁ a-top sites.     

Surface order dependent magnetic thin film growth: Fe on GaN(0 0 0 1)

X-ray photoemission spectroscopy and X-ray magnetic circular dichroism have been used to study the growth process, chemical composition and magnetic character of iron deposited on ordered and disordered GaN(0 0 0 1) surfaces. On the (1 × 1) ordered surface the Fe grows uniformly but with disruption to the substrate surface, subsequently nitrogen desorbs from the surface, some of which diffuses into the Fe overlayer. The film is magnetically fractured, with high magnetic coercivity and broad switching fields. Conversely, the gallium rich disordered surface protects the underlying substrate from any disruption and initially induces non-uniform growth, the Fe clusters coalesce at ∼12 Å, to produce a uniform film with desirable magnetic characteristics. Films beyond this point (>12 Å) indicate sharp hysteresis loops with low coercivities. For the resultant film (36 Å) we measure a magnetic moment of 2.02 μ_B, in agreement with bulk bcc iron (2.068 μ_B.)     

The gold and oxygen (3 × 1) structures on W(1 1 2)

The adsorption of two very different adsorbates, gold and oxygen, induce the formation of a (3 × 1) surface structure on both W(1 1 2) and Mo(1 1 2). In spite of similar adsorbate unit cells, the surface electronic structure, derived from photoemission, exhibits pronounced differences for the two adsorbates. Indeed, both experiment and simulations indicate substantial changes in electronic structures of (1 × 1) and (3 × 1) gold overlayers supported by highly anisotropic (1 1 2) plane. We speculate that (3 × 1) is a favored periodicity in the atomic rearrangement of the (1 1 2) surfaces of molybdenum and tungsten due in part as a result of the initial state band structure of these surfaces.     

Growth of epitaxial thin Pd(1 1 1) films on Pt(1 1 1) and oxygen-terminated FeO(1 1 1) surfaces

Thin Pd films (1-10 monolayers, ML) were deposited at 35 K on a Pt(1 1 1) single crystal and on an oxygen-terminated FeO(1 1 1) monolayer supported on Pt(1 1 1). Low energy electron diffraction, Auger electron spectroscopy, and Kr and CO temperature programmed desorption techniques were used to investigate the annealing induced changes in the film surface morphology. For growth on Pt(1 1 1), the films order upon annealing to 500 K and form epitaxial Pd(1 1 1). Further annealing above 900 K results in Pd diffusion into the Pt(1 1 1) bulk and Pt-Pd alloy formation. Chemisorption of CO shows that even the first ordered monolayer of Pd on Pt(1 1 1) has adsorption properties identical to bulk Pd(1 1 1). Similar experiments conducted on FeO(1 1 1) indicate that 500 K annealing of a 10 ML thick Pd deposit also yields ordered Pd(1 1 1). In contrast, annealing of 1 and 3 ML thick Pd films did not result in formation of continuous Pd(1 1 1). We speculate that for these thinner films Pd diffuses underneath the FeO(1 1 1).