Growth of Co nanoparticles on a nanostructured θ-Al2O3 film on CoAl(1 0 0)

We have investigated the growth of Co nanoparticles on θ-Al₂O₃/CoAl(1 0 0) by means of Auger electron spectroscopy (AES), high-resolution electron energy loss spectroscopy (EELS), low energy electron diffraction (LEED) and scanning tunneling microscopy (STM). Due to Volmer-Weber growth, Co forms particles with a mean diameter of approximately 2.5 nm and height of 0.8 nm. Even on the entirely covered oxide, there is no Ostwald ripening and Co particles stay structurally isolated. The nanoparticles exhibit a small size distribution and tend to form chains, as predetermined by the streak structure of the oxide template. For sufficient high coverages Co-core-CoO-shell nanoparticles may be evidenced, which is explained as a result of surfactant oxygen. The nanostructured particles may open the door to numerous applications, such as in catalysis and magnetoelectronic applications, where large areas of ordered nanodots are desired.     

RT growth of acetonitrile and acrylonitrile on Si(0 0 1)-2 × 1 studied by XPS and LEED

In this work we show the adsorption of acetonitrile (CH₃CN) and acrylonitrile (CH₂CHCN) on Si(0 0 1)-2 × 1 at room temperature by increasing the molecular doses. Especially, by means of XPS and LEED data, we stress the action of these molecules on the silicon surface locating the dangling-bonds quasi-saturation within 10 L. The shortage of nitrogen XPS signal and some anomalies in carbon spectra point to an invading action from a traditional X-ray source (Al-K_α line) against chemisorbed molecules. In particular, we think that a long exposure to this radiation could break carbon-silicon bonds changing some adsorption geometries and making desorb molecular fragments.     

Mechanism of GeH4 dissociation on Si(1 1 1)-(7 × 7)

Results of an STM study of dissociative GeH₄ adsorption on Si(1 1 1)-(7 × 7) at 300 K show that GeH₄ adsorbs under scission of two Ge-H bonds according to GeH₄(g) + 4db → GeH₂(ad) + 2H(ad). GeH₂ binds to two adatom dangling bonds in a bridged configuration, while the two released hydrogen atoms saturate two additional dangling bonds. The GeH₄ sticking coefficient under these conditions is 1.2 × 10⁻⁶, one order of magnitude smaller than for SiH₄.     

Adsorption and thermal decomposition of C60 on Co/Si(111)-7 × 7

We present a study on the adsorption and thermal decomposition of C₆₀ on Co covered Si(111)-7 × 7 using scanning tunneling microscopy and X-ray photoelectron spectroscopy. Co-induced magic clusters grown on Si(111)-7 × 7 are identified as a possible adsorption site where 51 ± 3% of C₆₀ molecules adsorb at room temperature. On Co/Si(111)-7 × 7, C₆₀ molecules start to decompose at 450 °C, and are completely dissociated to form SiC by 720 °C. This temperature is significantly lower than 910 °C at which C₆₀ completely dissociates on clean Si(111)-7 × 7. This is a possible low temperature method for growing crystalline SiC films using C₆₀ as a precursor molecule.     

The 2 × 1 reconstruction of the rutile TiO2(0 1 1) surface: A combined density functional theory, X-ray diffraction, and scanning tunneling microscopy study

An extensive search for possible structural models of the (2 × 1)-reconstructed rutile TiO₂(0 1 1) surface was carried out by means of density functional theory (DFT) calculations. A number of models were identified that have much lower surface energies than the previously-proposed ‘titanyl’ and ‘microfaceting’ models. These new structures were tested with surface X-ray diffraction (SXRD) and voltage-dependent STM measurements. The model that is (by far) energetically most stable shows also the best agreement with SXRD data. Calculated STM images agree with the experimental ones for appropriate tunneling conditions. In contrast to previously-proposed models, this structure is not of missing-row type; because of its similarity to the fully optimized brookite TiO₂(0 0 1) surface, we call it the ‘brookite (0 0 1)-like’ model. The new surface structure exhibits two different types of undercoordinated oxygen and titanium atoms, and is, in its stoichiometric form, predicted to be rather inert towards the adsorption of probe molecules.     

Thin PTCDA films on Si(0 0 1): 1. Growth mode

We have studied the interface and thin film formation of the organic molecular semiconductor 3,4,9,10 perylene tetracarboxylic dianhydride (PTCDA) on clean and on hydrogen passivated Si(0 0 1) surfaces. The studies were made by means of high resolution X-ray photoelectron spectroscopy (HRXPS), near edge X-ray absorption fine structure (NEXAFS), low energy electron diffraction (LEED), and atomic force microscopy (AFM). On the passivated surface the LEED pattern is somewhat diffuse but reveals that the molecules grow in several ordered domains with equivalent orientations to the substrate. NEXAFS shows that the molecules are lying flat on the substrate. The Si 2p XPS line shape is not affected when the film is deposited so it can be concluded that the interaction at the interface between PTCDA and the substrate is weak. The evolution of the film formation appears to be homogeneous for the first monolayer with a nearly complete coverage of flat lying molecules based on the XPS attenuation. For layer thickness of 0.5-2 monolayers (ML) the molecules start to form islands, attracting the molecules in between, leaving the substrate partly uncovered. For thicker films there is a Stranski-Krastanov growth mode with thick islands and a monolayer thick film in between. For the clean surface the ordering of the film is much lower and angle resolved photoelectron spectroscopy (ARPES) of the molecular orbitals have only a small dependence of the emission angle. NEXAFS shows that the molecules do not lie flat on the surface and also reveal a chemical interaction at the interface.     

Ultra-thin film growth of titanium dioxide on W(1 0 0)

We have employed low energy electron diffraction (LEED) and X-ray photoelectron spectroscopy to follow the epitaxial growth of thin films of TiO₂ on W(1 0 0). The films were grown both by metal vapour deposition of titanium onto the substrate in UHV with subsequent annealing in a low partial pressure of oxygen, and by metal vapour deposition in a low partial pressure of oxygen. LEED patterns showed the characteristic patterns of (1 1 0) oriented rutile. A systematic spot splitting was observed and attributed to a stepped surface. The calculated step height was found to be in good agreement with that expected for rutile TiO₂(1 1 0), 3.3 Å. Titanium core level shifts were used to identify oxidation states as a function of film thickness allowing the interpretation in terms of a slightly sub-stoichiometric interface layer in contact with the substrate. In combination with the LEED patterns, the film structure is therefore determined to be (1 1 0) oriented rutile with a comparable level of stoichiometry to UHV prepared bulk crystals. The ordered step structure indicates considerable structural complexity of the surface.     

Epitaxial C60 thin films on Bi(0 0 0 1)

We have used the Bi(0 0 0 1)/Si(1 1 1) template to grow highly ordered C₆₀ epitaxial thin films and analyzed them using scanning tunneling microscopy and low-energy electron microscopy. The in situ low-energy electron microscope investigations show that the initial nucleation of the C₆₀ islands on the surface takes place at surface defects, such as domain boundaries and multiple steps. The in-plane lattice parameters of this C₆₀ film turns out to be the same as that of the bulk fcc(1 1 1) C₆₀. The line-on-line epitaxial structure is realized in spite of a weak interaction between the C₆₀ molecules and Bi(0 0 0 1) surface, while scanning tunneling spectroscopy indicates that there is a negligible charge transfer between the molecules and the surface.     

Electron and lattice structure of ultra thin Ag films on Si(1 1 1) and Si(0 0 1)

We studied the low temperature (T ? 130 K) growth of Ag on Si(0 0 1) and Si(1 1 1) flat surfaces prepared by Si homo epitaxy with the aim to achieve thin metallic films. The band structure and morphology of the Ag overlayers have been investigated by means of XPS, UPS, LEED, STM and STS. Surprisingly a (√3 × √3)R30° LEED structure for Ag films has been observed after deposition of 2-6 ML Ag onto a Si(1 1 1)(√3 × √3)R30°Ag surface at low temperatures. XPS investigations showed that these films are solid, and UPS measurements indicate that they are metallic. However, after closer STM studies we found that these films consists of sharp Ag islands and (√3 × √3)R30°Ag flat terraces in between. On Si(0 0 1) the low-temperature deposition yields an epitaxial growth of Ag on clean Si(0 0 1)-2 × 1 with a twinned Ag(1 1 1) structure at coverage’s as low as 10 ML. Furthermore the conductivity of few monolayer Ag films on Si(1 0 0) surfaces has been studied as a function of temperature (40-300 K).     

Surface chemistry of NO and NO2 on the Pt(1 1 0)-(1 × 2) surface: A comparative study

The surface chemistry of NO and NO₂ on clean and oxygen-precovered Pt(1 1 0)-(1 × 2) surfaces were investigated by means of high resolution electron energy loss spectroscopy (HREELS), X-ray photoelectron spectroscopy (XPS) and thermal desorption spectroscopy (TDS). At room temperature, NO molecularly adsorbs on Pt(1 1 0), forming linear NO(a) and bridged NO(a). Coverage-dependent repulsive interactions within NO(a) drive the reversible transformation between linear and bridged NO(a). Some NO(a) decomposes upon heating, producing both N₂ and N₂O. For NO adsorption on the oxygen-precovered surface, repulsive interactions exist between precovered oxygen adatoms and NO(a), resulting in more NO(a) desorbing from the surface in the form of linear NO(a). Bridged NO(a) experiences stronger repulsive interactions with precovered oxygen than linear NO(a). The desorption activation energy of bridged NO(a) from oxygen-precovered Pt(1 1 0) is lower than that from clean Pt(1 1 0), but the desorption activation energy of linear NO(a) is not affected by the precovered oxygen. NO₂ decomposes on Pt(1 1 0)-(1 × 2) surface at room temperature. The resulted NO(a) (both linear NO(a) and bridged NO(a)) and O(a) repulsively interact each other. Comparing with NO/Pt(1 1 0), more NO(a) desorbs from NO₂/Pt(1 1 0) as linear NO(a), and both linear NO(a) and bridged NO(a) exhibit lower desorption activation energies. The reaction pathways of NO(a) on Pt(1 1 0), desorption or decomposition, are affected by their repulsive interactions with coexisting oxygen adatoms.     

Structure, defects, and impurities at the rutile TiO2(0 1 1)-(2 × 1) surface: A scanning tunneling microscopy study

The titanium dioxide rutile (0 1 1) (equivalent to (1 0 1)) surface reconstructs to a stable (2 × 1) structure upon sputtering and annealing in ultrahigh vacuum. A previously proposed model (T.J. Beck, A. Klust, M. Batzill, U. Diebold, C. Di Valentin, A. Selloni, Phys. Rev. Lett. 93 (2004) 036104/1) containing onefold coordinated oxygen atoms (titanyl groups, TiO) is supported by Scanning Tunneling Microscopy (STM) measurements. These TiO sites are imaged bright in empty-states STM. A few percent of these terminal oxygen atoms are missing at vacuum-annealed surfaces of bulk-reduced samples. These O vacancies are imaged as dark spots. Their number density depends on the reduction state of the bulk. Double vacancies are the most commonly observed defect configuration; single vacancies and vacancies involving several O atoms are present as well. Formation of oxygen vacancies can be suppressed by annealing a sputtered surface first in vacuum and then in oxygen; annealing a sputtered surface in oxygen results in surface restructuring and a (3 × 1) phase. Anti-phase domain boundaries in the (2 × 1) structure are active adsorption sites. Segregation of calcium impurities from the bulk results in an ordered overlayer that exhibits domains with a centered (2 × 1) periodicity in STM.     

Formation and structure of a (√19 × √19)R23.4°-Ge/Pt(1 1 1) surface alloy

An ordered (√19 × √19)R23.4°-Ge/Pt(1 1 1) surface alloy can be formed by vapor depositing one-monolayer Ge on a Pt(1 1 1) substrate at room temperature and subsequently annealing at 900-1200 K. The long-range order of this structure was observed by low energy electron diffraction (LEED) and confirmed by scanning tunneling microscopy (STM). The local structure and alloying of vapor-deposited Ge on Pt(1 1 1) at 300 K was investigated by using X-ray Photoelectron Diffraction (XPD) and low energy alkali ion scattering spectroscopy (ALISS). XPS indicates that Ge adatoms are incorporated to form an alloy surface layer at ∼900 K. Results from XPD and ALISS establish that Ge atoms are substitutionally incorporated into the Pt surface layer and reside exclusively in the topmost layer, with excess Ge diffusing deep into the bulk of the crystal. The incorporated Ge atoms at the surface are located very close to substitutional Pt atomic positions, without any corrugation or “buckling”. Temperature Programmed Desorption (TPD) shows that both CO and NO adsorb more weakly on the Ge/Pt(1 1 1) surface alloy compared to that on the clean Pt(1 1 1) surface.     

Atomic structure of a regular Si(2 2 3) triple step staircase

An atomically accurate regular triple step array with a period of 4.8 nm has been fabricated on the vicinal Si(5 5 7) surface. Its atomic structure was studied on different length scales by scanning tunneling microscopy, low energy electron diffraction and photoelectron spectroscopy. These complementary methods allowed to identify the average orientation of the regular triple step staircase as Si(2 2 3) and to give a deeper insight into the atomic arrangement of this structure.     

Dynamics of copper atoms on Si(1 1 1)-7 × 7 surfaces

This study investigated the dynamics of copper atoms adsorbed on Si(1 1 1)-7 × 7 surfaces between 300 K and 623 K using a variable-temperature scanning tunneling microscope (STM). The diffusion behavior of copper clusters containing up to ∼6 atoms into a particular half unit cell of the 7 × 7 reconstructed Si(1 1 1) surface was considered. The movements and the formation of copper clusters were tracked in detail. The activation energies and pre-exponential factors for various diffusion paths were estimated. Finally, the Cu-etching-Si process and the quasi-5 × 5 incommensurated phase of Cu/Si islands were discussed.     

The structure of monolayer SiO2 on Mo(1 1 2): A 2-D [Si-O-Si] network or isolated [SiO4] units?

In this letter, atomically resolved scanning tunneling microscopic (STM) images obtained from monolayer SiO₂/Mo(1 1 2) are presented. The results are consistent with a previously proposed structural model of isolated [SiO₄] units based on vibrational features observed by high-resolution electron energy loss spectroscopy (HREELS) and infrared reflection-absorption spectroscopy (IRAS), and oxygen species identified by ultra-violet photoemission spectroscopy (UPS). These results are inconsistent with a structural model that assumes a two-dimensional (2-D) [Si-O-Si] network. These data illustrate that a metal substrate, although coated with an oxide thin layer, can be directly imaged at the atomic-scale with STM.     

Structural and statistical analysis of Yb/Si(1 1 1) and Eu/Si(1 1 1) reconstructions

We have performed the structural and statistical analysis of Yb/Si(1 1 1) and Eu/Si(1 1 1) surfaces in the submonolayer regime utilizing low-energy electron diffraction and scanning tunneling microscopy (STM). The almost identical series of one-dimensional chain structures (e.g., 3 × 2/3 × 1, 5 × 1, 7 × 1, 9 × 1, and 2 × 1 phases) are found in order of increasing metal coverage for both adsorbed systems, however, only the Eu/Si system reveals the ‘√3’-like reconstruction before the 2 × 1 endpoint phase. The atomic models of chain structures are proposed and discussed. In particular, our results suggest the odd-order n×1 (n=5,7,9,…) intermediate reconstructions to incorporate the Seiwatz chains and honeycomb chains with the proportion of m:1, where . The statistical analysis of STM images is carried out to examine the correlation of atomic rows on Eu/Si and Yb/Si surfaces. It is found that Eu stabilizes more ordered row configuration compared to Yb, which can be explained in terms of indirect electronic interaction of atomic chains or/and different magnetic properties of adsorbed species.     

Elemental steps in the growth of thin β-Ga2O3 films on CoGa(1 0 0)

The oxidation of CoGa(1 0 0) at 700 K was studied by means of high resolution electron energy loss spectroscopy (EELS), scanning tunneling microscopy, low energy electron diffraction and Auger electron spectroscopy (AES). At 700 K, thin well-ordered β-Ga₂O₃ films grow on CoGa(1 0 0). The EEL spectrum of the Ga-oxide films exhibit Fuchs–Kliewer phonons at 305, 455, 645, and 785 cm⁻¹. For low oxygen exposure (<0.2 L), the growth of oxide-islands starts at step edges and on defects. The oxide films have the shape of long, rectangular islands and are oriented in the [1 0 0] and [0 1 0] directions of the substrate. For higher oxygen exposure, islands of β-Ga₂O₃ are found also on the terraces. After an exposure of 200 L O₂ at 700 K, the CoGa(1 0 0) surface is homogeneously covered with a thin film of β-Ga₂O₃.     

Growth of Si nanostructures on Ag(0 0 1)

The first stages of the growth of silicon on Ag(0 0 1) at moderate temperatures start by the formation of a p(3 × 3) superstructure, which continuously evolves with increasing coverage toward a more complex superstructure. In this paper, the atomic arrangement of the p(3 × 3) and of the “complex” superstructure has been investigated using scanning tunnelling microscopy, surface X-ray diffraction and low energy electron diffraction. The atomic model retained for the p(3 × 3) reconstruction consists in four silicon atoms (tetramers) adsorbed near hollow and bridge sites of the top most Ag(0 0 1) surface layer. For higher coverages, i.e., when the “complex” superstructure starts to develop, the silicon overlayer forms periodic stripes, most probably bi-layers, with a graphitic like structure.     

Scanning tunnelling microscopy and spectroscopy of the reduced TiO2(1 0 0) surface

Scanning tunnelling microscopy and current imaging tunnelling spectroscopy were used to study the topographic and electronic structure of a reduced TiO₂(1 0 0) surface. The STM results showed that the TiO₂(1 0 0) surface is capable to form (1 × 7) reconstruction which can transform to (1 × 3) reconstruction due to reoxidation of the surface. The CITS results showed that the (1 × 7) reconstruction is much more metallic in compared to the (1 × 3) reconstruction showing pronounced surface states at energy 1.3 eV and 0.8 eV below the Fermi level and at energy 1.0-1.2 eV above the Fermi level.     

The dense α-√3 × √3Pb/Si(1 1 1) phase: A comprehensive STM and SPA-LEED study of ordering, phase transitions and interactions

The T-θ phase diagram for the system Pb/Si(1 1 1) was determined in the coverage range 6/5 ML < θ < 4/3 ML from complementary STM and SPA-LEED experiments. This coverage is within the range where a “Devil’s Staircase” (DS) has been realized. The numerous DS phases answer conflicting information in the Pb/Si(1 1 1) literature and update the previously published phase diagram. The measurements reveal the thermal stability of the different linear DS phases with the transition temperature found to be a function of phase period. Because of additional complexity in the experimental system (i.e. two-dimensionality and 3-fold symmetry) the linear DS phases transform at higher temperature into commensurate phases of 3-fold symmetry HIC (historically named “hexagonal incommensurate phase”). Different types of HIC phases have been discovered differing in the size of the supercell built out of √3 × √3 domains separated by domain walls of the √7 × √3 phase. The detailed structures of these HIC phases (coverage, binding site, twist angle, etc.) have been deduced from the comparison of STM images and diffraction patterns. After heating the system to even higher temperature the HIC phase transforms into the disordered phase. For sufficiently high coverage a SIC (“striped incommensurate phase” which is also built from √3 × √3 domains but meandering √7 × √3 domain walls) is observed which also disorders at high temperatures.