In vitro investigation of protein adsorption and platelet adhesion on inorganic biomaterial surfaces

The aim of this paper was to study the surface properties, protein adsorption and platelet adhesion behaviors of diamond-like carbon (DLC) and titanium (Ti) films. The surface energy and microstructures of these films were characterized by contact angle measurement and atomic force microscopy (AFM). A modified Coomassie brilliant blue (CBB) protein assay was used to study the amount of adsorbed proteins. Platelet adhesion was assessed by scanning electron microscopy (SEM). The AFM results show that the DLC film is smoother than Ti. Protein adsorption results from CBB protein assay show that the ratio of adsorbed albumin (Alb) to IgG (R_A/I) on DLC is larger than Ti, which coincide with the sequence of the ratio of interfacial tension between solid surface and Alb (γ_S,Alb) to interfacial tension between surface and IgG (γ_S,IgG) (γ_S,Alb/γ_S,IgG). The DLC film has a preferential adsorption for Alb. The results suggest that the ratio of γ_S,Alb/γ_S,IgG may indicate an Alb/IgG affinity ratio of materials. More platelets adhere on Ti film than on DLC, which may correspond to the surface roughness of materials. The conclusion is the blood compatibility of DLC seems to be better than Ti.     

Fabrication of superhydrophobic silica-based surfaces with high transmittance by using tetraethoxysilane precursor and different polymeric species

The preparation of superhydrophobic silica-based surfaces via the sol-gel process through the addition of different polymeric species into the precursor solution was done in this study. The surface roughness of the films was obtained by removing the organic polymer at a high temperature, and then the hydrophobic groups were bonded onto the films with a monolayer by chemical reaction with hexamethyldisilazane (HMDS). The characteristic properties of the as-prepared films were analyzed by contact angle measurements, scanning electron microscopy (SEM), atomic force microscopy (AFM), nitrogen adsorption/desorption, and UV-vis scanning spectrophotometer. The experimental results revealed that the superhydrophobic thin films with high transmittance could easily be prepared using polypropylene (PPG), polyethylene (PEG), and poly(vinylpyrrolidone) (PVP). Surface roughness and pore size were enhanced using PPG polymeric species. The distribution of pore size was from the microporous to the mesoporous and marcoporous regions. In addition, the contact angles of the rough surfaces prepared at 500 °C without modification of HMDS were smaller than 5° but larger than 156° after modified by HMDS.     

Chemically induced graft copolymerization of 2-hydroxyethyl methacrylate onto polyurethane surface for improving blood compatibility

To improve hydrophilicity and blood compatibility properties of polyurethane (PU) film, we chemically induced graft copolymerization of 2-hydroxyethyl methacrylate (HEMA) onto the surface of polyurethane film using benzoyl peroxide as an initiator. The effects of grafting temperature, grafting time, monomer and initiator concentrations on the grafting yields were studied. The maximum grafting yield value was obtained 0.0275 g/cm² for HEMA. Characterization of the films was carried out by attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR), water contact angle measurements. ATR-FTIR data showed that HEMA was successfully grafted onto the PU films surface. Water contact angle measurement demonstrated the grafted films possessed a relatively hydrophilic surface. The blood compatibility of the grafted films was preliminarily evaluated by a platelet-rich plasma adhesion test and hemolysis test. The results of platelet adhesion experiment showed that polyurethane grafted polymerization with monomer of 2-hydroxyethyl methacrylate had good blood compatibility featured by the low platelet adhesion. Hemolysis rate of the PU-g-PHEMA films was dramatically decreased than the ungrafted PU films. This kind of new biomaterials grafted with HEMA monomers might have a potential usage for biomedical applications.     

Polypropylene modified with 2-hydroxyethyl acrylate-g-2-methacryloyloxyethyl phosphorycholine and its hemocompatibility

Polypropylene (PP) was modified with 2-hydroxyethyl acrylate (HEA) by solution radical grafting to introduce active hydroxyl groups on polypropylene backbone (PP-g-HEA). Then the biomimic monomer, 2-methacryloyloxyethyl phosphorycholine (MPC), was grafted onto the surface of PP-g-HEA film (PP-g-HEA-g-MPC) by redox graft polymerizations with ceric(IV) ammonium nitrate as an initiator. Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS) showed that the HEA and MPC were introduced onto PP molecular chains and the copolymer, PP-g-HEA-g-MPC were formed. The water contact angle measurements demonstrated that the final modified PP film exhibited a better hydrophilic surface compared to the neat PP film. The platelets adhesion on the neat PP, PP-g-HEA and PP-g-HEA-g-MPC film was examined by scanning electron microscopy (SEM). It was found that a large number of platelets were adhered and activated on the surface of neat PP and PP-g-HEA films, while the number of platelets on PP-g-HEA-g-MPC surface was decreased remarkably. The result revealed that the introduction of poly(MPC) onto the PP surface improved the hemocompatibility of PP substantially.     

Polymerization of Langmuir–Blodgett films of diacetylenes

Monolayer and multilayer assemblies of Langmuir–Blodgett films of 10–12 pentacosadyinoic acid (12–8 diacetylene) were deposited on flat gold substrates. Micrometre-size features were patterned by polymerization of the films by using standard electron beam lithography. Polymerized areas on a monolayer and bilayer, as well as multilayer films, were examined by scanning electron microscopy, atomic force microscopy and resonant Raman spectroscopy. It was established that polymerized areas on a monolayer and bilayer LB film adhere onto the gold substrate after development. The exposure curve, sensitivity, contrast and resolution of the polymer have been determined by using atomic force microscopy and correlated with the deposition conditions and molecular parameters. Stresses induced in the organic film during polymerization lead to an in-plane buckling of the micrometre-size polymer structure. A simple self-consistent theory was developed to predict critical strain and critical length of buckling. The observed effect of buckling of polymers might open an avenue for a wide range of important practical applications in the area of nanomechanical engineering.     

Modification of surface properties of polypropylene (PP) film using DC glow discharge air plasma

The industrial use of polypropylene (PP) films is limited because of undesirable properties such as poor adhesion and printability. In the present study, a DC glow discharge plasma has been used to improve the surface properties of PP films and make it useful for technical applications. The change in hydrophilicity of modified PP film surface was investigated by contact angle (CA) and surface energy measurements as a function of exposure time. In addition, plasma-treated PP films have been subjected to an ageing process to determine the durability of the plasma treatment. Changes in morphological and chemical composition of PP films were analyzed by atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS). The improvement in adhesion was studied by measuring T-peel and lap shear strength. The results show that the surface hydrophilicity has been improved due to the increase in the roughness and the introduction of oxygen-containing polar groups. The AFM observation on PP film shows that the roughness of the surface increased due to plasma treatment. Analysis of chemical binding states and surface chemical composition by XPS showed an increase in the formation of polar functional groups and the concentration of oxygen content on the plasma-processed PP film surfaces. T-peel and lap shear test for adhesion strength measurement showed that the adhesion strength of the plasma-modified PP films increased compared with untreated films surface.     

Tuning the adhesion of layer-by-layer films to the physicochemical properties of inner limiting membranes using nanoparticles

Retinal trauma is a serious concern for patients undergoing inner limiting membrane (ILM) peeling to correct for various vitreoretinal interface conditions. This mechanical trauma can be prevented by modifying the surface of surgical instruments to increase adhesion to the ILM. To this effect, we have studied the effects of roughness and surface charge on the adhesive properties of ILMs by utilizing layer-by-layer (LbL) films with embedded gold nanoparticles (LbL-AuNP films). LbL films were assembled on atomic force microscopy (AFM) tipless cantilevers. Topographical analysis of these films, with and without nanoparticles, showed that LbL films with nanoparticles had a higher rms roughness compared to films alone or unmodified cantilevers. Nanoparticle-modified LbL films significantly increased the adhesion forces at the cantilever-ILM interface, compared to LbL films without particles. Surprisingly, adsorption of gold nanoparticles onto the AFM cantilevers caused increases in adhesion forces greater than those measured with LbL-AuNP films. These results have important implications for the design of surface modifications for vitreoretinal surgical instruments.     

Amine-containing film deposited in pulsed dielectric barrier discharge at a high pressure and its cell adsorption behaviours

With monomer allylamine, amine-containing functional films were prepared in alternative current pulsed dielectric barrier discharge (DBD) at a high pressure. This paper analyses in detail the film properties and structures, such as hydrophilicity, compounds and microstructures as well as amine density by the water contact angle, Fourier transform infrared spectroscopy, atomic force microscopy, and ultraviolet--visible measurement. The influence of discharge parameters, in particular applied power, on amine density was investigated. As an application the cell adsorption behaviours on plasma polymerization films was performed in-vitro. The results show that at a high pressure pulsed DBD plasma can polymerize films with sufficient amine group on surface, through which the very efficient cell adsorption behaviours was demonstrated, and the high rate of cell proliferation was visualized.     

Morphology and defect structure of the CeO2(1 1 1) films grown on Ru(0 0 0 1) as studied by scanning tunneling microscopy

The morphology of ceria films grown on a Ru(0 0 0 1) substrate was studied by scanning tunneling microscopy in combination with low-energy electron diffraction and Auger electron spectroscopy. The preparation conditions were determined for the growth of nm-thick, well-ordered CeO₂(1 1 1) films covering the entire surface. The recipe has been adopted from the one suggested by Mullins et al. [D.R. Mullins, P.V. Radulovic, S.H. Overbury, Surf. Sci. 429 (1999) 186] and modified in that significantly higher oxidation temperatures are required to form atomically flat terraces, up to 500 Å in width, with a low density of the point defects assigned to oxygen vacancies. The terraces often consist of several rotational domains. A circular shape of terraces suggest a large variety of undercoordinated sites at the step edges which preferentially nucleate gold particles deposited onto these films. The results show that reactivity studies over ceria and metal/ceria surfaces should be complemented with STM studies, which provide direct information on the film morphology and surface defects, which are usually considered as active sites for catalysis over ceria.     

Polysulfobetaine films prepared by electrografting technique for reduction of biofouling on electroconductive surfaces

The sulfobetaine films were prepared on stainless steel and golden surfaces. In the first step, the poly(2-(dimethylamino)ethyl methacrylate) film was created by employing the electrografting polymerization technique. In the second step, this film was modified to polysulfobetaine, i.e. the polymer film bearing the zwitterionic groups. The presence of the electrografted film and its modification were determined by contact angle measurements, infrared spectroscopy in reflectance mode and X-ray photoelectron spectroscopy. The prepared films were homogeneous with the thickness from about 5 to 26 nm as determined by X-ray photoelectron spectroscopy. The atomic force microscopy measurements showed the increase of surface roughness upon the surface coating. In vitro tests using adherent RAT-2 fibroblast cells and fluorescently labelled bovine serum albumin proteins showed that prepared polysulfobetaine films can be used in applications requiring the resistance against cell attachment and biofouling.     

Aggregation induced polyelectrolyte multilayer film containing cubic silsesquioxane nanoparticles

Polyelectrolyte multilayer (PEM) films offer a method to functionalize substrates with specific properties that enable the films to be used for a variety of purposes. Desirable qualities of PEM films can include mechanical strengths, ease of preparations, flexibility, and their abilities to have their properties tailored to suit a particular process. We present a simple method to fabricate a class of PEM films that incorporate cubic silsesquioxane nanoparticles (CSSQ). Through a spin self-assembly (SSA) process, a hybrid multilayered film with two-components, namely, poly(styrene sulfonate) (PSS) and octaammonium cubic silsesquioxane (CSSQ) nanoparticle have been fabricated. The formation of this multilayer film is further verified by ellipsometry, contact angle studies, and atomic force microscopy (AFM). The water contact angle and ellipsometric measurements exhibit that the (PSS/OA-CSSQ) films are deposited onto the substrate. The surface topography of the deposited bilayers of PSS/OA-CSSQ film appears to be uniformly distributed with extremely small granules but the film uniformity of the granular surface is diminished and clusters of granules are observed at above 5 bilayers due to the aggregation of the OA-CSSQ nanoparticles.     

Contact angle hysteresis of liquid drops as means to measure adhesive energy of zein on solid substrates

Adhesion of zein to solid substrates has been studied using surface energy profiles as indices and by adhesion mapping using atomic force microscopy (AFM). Different plasticizers like glycerol and sorbitol have been used to form mixed films with zein and properties of these films are studied using surface energy profiles. Comparison of the results from the different mixed samples with those from the pure zein films showed that force mapping could identify areas rich in protein. The adhesion maps produced were deconvoluted from sample topography and contrasted with the data obtained from contact angle measurements. A comparison of the two methods shows that the extent of contact angle hysteresis is indicative of both hydrophobicity of the surface as well as the force of adhesion. Mechanical properties and microstructure of zein films prepared by casting from solutions and using Langmuir-Blodgett film technique have been investigated. Pure zein seemed brittle and exhibited an essentially linear relationship between stress and strain. Films with plasticizer were tougher than these films. In general, mixed films showed better mechanical properties than pure films and had higher ultimate tensile strength and increased per cent elongation. Further, the mixed films of zein showed a higher force of adhesion compared to the pure films.     

Surface modification of a polyamide 6 film by He/CF4 plasma using atmospheric pressure plasma jet

Polyamide 6 (PA 6) films are treated with helium(He)/CF₄ plasma at atmospheric pressure. The samples are treated at different treatment times. The surface modification of the PA 6 films is evaluated by water contact angle, atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS). The etching rate is used to study the etching effect of He/CF₄ plasma on the PA 6 films. The T-peel strengths of the control and plasma treated films are measured to show the surface adhesion properties of the films. As the treatment time increases, the etching rate decreases steadily, the contact angle decreases initially and then increases, while the T-peel strength increases first and then decreases. AFM analyses show that the surface roughness increases after the plasma treatment. XPS analyses reveal substantial incorporation of fluorine and/or oxygen atoms to the polymer chains on the film surfaces.     

New bioactive hybrid material of nano-hydroxyapatite based on N-carboxyethylchitosan for bone tissue engineering

N-carboxyethylchitosan/nano-hydroxyapatite (NCECS/HA) composite films were fabricated and their potential applications in guiding bone regeneration were investigated in terms of their in vitro cellular activity. Fourier ransform infrared spectroscopy (FTIR), X-ray diffraction (XRD) and thermogravimetric analysis (TGA) were used to investigate the structure and composition of the composite film. Field Emission scanning electron microscopy (FESEM) revealed that HA nanoparticles were dispersed homogeneously in NCECS matrix. The composite film has sufficient mechanical properties for tissue engineering scaffold. The composite film was found to have better cartilage cell adhesion and growth than pure NCECS film.     

Surface interactions of molecular C60 and impact on Ni(100) and Co(0001) film growth: A scanning tunneling microscopy study

Here, the interactions of C₆₀ at the surface of pseudomorphic Ni/Cu(100) and Co/Ru(0001) thin films and its effect on film growth and morphology were determined using in-situ scanning tunneling microscopy (STM) and Auger electron spectroscopy (AES). The novel development of C₆₀-metallic based nanosystems, such as C₆₀ molecular junction transistors, hinges on our ability to understand the factors governing structural stability in these nanosystems and the nature of the bond interactions at the C₆₀–metal interface. In this study, C₆₀ deposited onto the Ni(100) film surface is observed to be fairly immobile and uniformly distributed across the Ni surface. On the Co(0001) film surface however, C₆₀ mobility is observed to be severely limited in some regions and highly mobile in others dependent upon Co film surface reconstruction, resulting in a non-uniform distribution of C₆₀ across the Co film surface. Despite the presence of C₆₀ on the Ni surface, there is no obvious influence of the C₆₀ on further Ni film growth. In contrast, during Co film growth, islands only nucleate and grow from step edges or locally around C₆₀ molecules. The strength of the Co–C₆₀ bond interaction appears stronger than the Co–Co bond on Co film terrace. Generally, the Ni and Co films both continue epitaxial film growth in the presence of molecular C₆₀. AES results indicate the C₆₀ molecules maintain their chemical integrity during growth.     

Exploring the influence of a XeCl laser treatment on biocompatibility of polyethersulfone film

The effect of XeCl laser irradiation on biocompatibility of polyethersulfone (PES) film surface was investigated. For this purpose, the surface of PES film was irradiated with different number of pulses at different fluences. The treated surfaces were characterized by attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), scanning electron microscopy (SEM), atomic force microscopy (AFM) and contact angle measurements. The platelet adhesion and cell culture measurements were done on the treated surface for investigation of the biocompatibility. It was shown that, irradiation of surface with 500 pulses at a fluence of 25 mJ/cm² is the most optimal condition for improving the platelet adhesion on the PES surface with a XeCl laser.     

Fabrication and characterization of superhydrophobic thin films based on TEOS/RF hybrid

Preparation of superhydrophobic silica-based thin film by adjusting different concentration of reverse (W/O) emulsion of resorcinol formaldehyde resin (re-RF) which was hybridised with silica sol has been developed. The hybrid films were coated by the mixing solution which included precursor solution (sol-gel process) and re-RF (sol-gel process). Rough surfaces were obtained by removing the organic polymer at high temperature and then the hydrophobic groups bonded onto the films were obtained by the reaction with trimethylchlorosilane (TMCS). Characteristic properties of the as-prepared cross-section and surface of the films were analyzed by scanning electron microscopy (SEM) and atom force microscopy (AFM). The experimental parameters are mainly varied the weight ratio of re-RF to silica sol from 0.2 to 4.0. The result showed that the contact angle of the modified silica film was greater than 160° when the weight ratio of re-RF to silica sol was 2.0.     

Improving blood-compatibility of titanium by coating collagen-heparin multilayers

This work deals with improving the blood-compatibility of titanium by coating it with heparin (Hep) and collagen (Col) using a layer-by-layer (LBL) self-assembly technique. In the work described here, LBL-produced Hep-Col film growth is initialized by deposition of a layer of positively charged polyl-Lysine (PLL) on a titanium surface, which is negatively charged after treatment with NaOH, followed by formation of a multilayer thin film formed by alternating deposition of negatively charged heparin and positively charged collagen utilizing electrostatic interaction. The chemical composition, wettability, surface topography, mass and thickness of the film were investigated by Fourier transform infrared spectroscopy, water contact angle measurement, scanning electron microscopy, atomic force microscopy, electronic analytical semi-microbalances, and XP stylus profilometry. The in vitro platelet adhesion and activation were investigated by a static platelet adhesion test probing the lactate dehydrogenase (LDH) release of adherent platelets after lysis and by a P-selectin assay. The clotting time was examined by activated partial thromboplastin time (APTT) and prothrombin time (PT) assays. All obtained data showed that the LBL film can significantly decrease platelet adhesion and activation, and prolong clotting time of APTT and PT compared to untreated titanium. LBL-produced Hep-Col films on titanium display more excellent anticoagulation performance than on the surface of titanium.     

Protein adsorption and biomimetic mineralization behaviors of PLL-DNA multilayered films assembled onto titanium

Titanium and its alloys are frequently used as surgical implants in load bearing situations, such as hip prostheses and dental implants, owing to their biocompatibility, mechanical and physical properties. In this paper, a layer-by-layer (LBL) self-assembly technique, based on the polyelectrolyte-mediated electrostatic adsorption of poly-l-lysine (PLL) and DNA, was used to the formation of multilayer on titanium surfaces. Then bovine serum albumin (BSA) adsorption and biomimetic mineralization of modified surfaces were studied. The chemical composition and wettability of assembled substrates were investigated by X-ray photoelectron spectroscopy (XPS), fluorescence microscopy and water contact angle measurement, respectively. The XPS analysis indicated that the layers were assembled successfully through electrostatic attractions. The measurement with ultraviolet (UV) spectrophotometer revealed that the LBL films enhanced ability of BSA adsorption onto titanium. The adsorption quantity of BSA on the surface terminated with PLL was higher than that of the surface terminated with DNA, and the samples of TiOH/P/D/P absorbed BSA most. Scanning electron microscopy (SEM) and X-ray diffraction (XRD) showed that samples of assembled PLL or/and DNA had better bioactivity in inducing HA formation. Thus the assembling of PLL and DNA onto the surface of titanium in turn via a layer-by-layer self-assembly technology can improve the bioactivity of titanium.     

Photoemission, NEXAFS and STM studies of pentacene thin films on Au(1 0 0)

We have investigated the initial stages of the growth of pentacene thin films on the Au(1 0 0) substrate using synchrotron radiation photoelectron spectroscopy (PES), near edge X-ray absorption fine structure (NEXAFS) and scanning tunnelling microscopy (STM). Results indicate a well-ordered structure with the pentacene molecules adopting a predominantly flat orientation with respect to the substrate for coverages of less than three monolayers. NEXAFS and photoemission data indicates the presence of a second molecular orientation for thicker films, with the introduction of a slight tilting away from planar bonding geometry at higher pentacene coverages. STM images of coverages less than three monolayers indicate a well-ordered pentacene structure allowing for the calculation of pentacene unit cell parameters. The pentacene molecular rows adopt a side-by-side bonding arrangement on the surface. For pentacene deposited at room temperature, step edges were observed to act as nucleation centres for film growth. Annealing of the substrate to 373 K was found to remove excess molecules and improve film quality, but did not otherwise change the bonding geometry of the pentacene with respect to the surface.