Electronic structure and surface reconstruction of adsorbed oxygen on copper(0 0 1)

The electronic structure of the c(2 × 2) and the missing row phases of chemisorbed O on Cu(0 0 1) at a coverage of 0.5 monolayers has been calculated using a full-potential semi-infinite embedding technique. Calculations are made over a range of Cu-O layer spacings, and from the change in the work function, the effective charge on O is obtained. The effective charge is the same for both phases of the O/Cu(0 0 1) surface with a value of −0.3|e| on O, and consequently too small to drive any surface instability. The angular momentum-resolved density of states and energy-resolved charge densities are used to describe the binding and the spatial electronic overlap at the surfaces. In the reconstructed phase the O and the surface Cu atoms undergo displacements, which optimises the bonding.     

CO oxidation on Pd(1 1 1), Pt(1 1 1), and Rh(1 1 1) surfaces studied by infrared chemiluminescence spectroscopy

The infrared (IR) chemiluminescence studies of CO₂ formed during steady-state CO oxidation over Pd(1 1 1), Pt(1 1 1), and Rh(1 1 1) surfaces were carried out. Analysis of their emission spectra indicates that the order of the average vibrational temperature () values of CO₂ formed during CO oxidation was as follows: Pd(1 1 1) > Pt(1 1 1) > Rh(1 1 1), and the order is coincident with the potential energy in the transition state expected by the theoretical calculations. Furthermore, it is suggested that the bending vibrational temperature () can also be influenced by the angle of O-C-O (∠_OCO) of the activated complex in the transition state, which has also been proposed by the theoretical calculations.     

Atomic structure of Cu2O(1 1 1)

Low-energy electron diffraction and scanning tunneling microscopy have been used to probe the surface atomic structure of Cu₂O(1 1 1) after various sample preparations. Annealing in oxygen gives a stoichiometric (1 × 1) oxygen terminated surface and further annealing in ultra-high vacuum results in a clear reconstruction and surface faceting. Tunneling from filled states in the reconstructed surface reveals a hexagonal pattern of large protrusions, which show an internal structure. The reconstruction is believed to be due to one-third of a monolayer of ordered oxygen vacancies. At areas on the surface where the large features are missing, another smaller type of protrusions is visible, which is associated with the ideal (1 × 1) surface. The relative position of the two types of features gives two possible models of the (1 1 1) surface. In the first model, the (1 × 1) surface is the ideal bulk terminated surface and coordinatively unsaturated oxygen ions are missing in the reconstructed surface. The second model agrees with the first model with the exception that coordinatively unsaturated copper ions in the outmost copper layer are missing in both the (1 × 1) and the reconstructed surface. The latter model is supported by previous surface free energy calculations. Since the undercoordinated copper ions have been suggested to be the catalytic active sites of Cu₂O(1 1 1), the presence or absence of these cations could be of great importance for the fundamental understanding of the surface reactivity of Cu₂O and of copper-based catalysts.     

Ge adsorption on SiC(0 0 0 1): An ab initio study

In this work we have performed an ab initio total energy investigation of the Ge adsorption process on the Si-terminated SiC(0 0 0 1)- and (3 × 3) surfaces. We find that Ge adatoms lying on the topmost sites of the and (3 × 3) surfaces represent the energetically more stable configurations at the initial stage of the Ge adsorption on the SiC(0 0 0 1) surface. The Si → Ge substitutional adsorption processes have been examined as a function of the Si and Ge chemical potentials. Increasing the Ge coverage, we verify that the formation of Ge wetting layer on the surface, and Ge nanocluster on the (3 × 3) surface are the energetically more stable configurations, in accordance with recent experimental findings.     

First-principles study of adsorption and diffusion on Ge/Si(0 0 1)-(2 × 8) and Ge/Si(1 0 5)-(1 × 2) surfaces

Using first-principles total-energy calculations, we have investigated the adsorption and diffusion of Si and Ge adatoms on Ge/Si(0 0 1)-(2 × 8) and Ge/Si(1 0 5)-(1 × 2) surfaces. The dimer vacancy lines on Ge/Si(0 0 1)-(2 × 8) and the alternate S_A and rebonded S_B steps on Ge/Si(1 0 5)-(1 × 2) are found to strongly influence the adatom kinetics. On Ge/Si(0 0 1)-(2 × 8) surface, the fast diffusion path is found to be along the dimer vacancy line (DVL), reversing the diffusion anisotropy on Si(0 0 1). Also, there exists a repulsion between the adatom and the DVL, which is expected to increase the adatom density and hence island nucleation rate in between the DVLs. On Ge/Si(1 0 5)-(1 × 2) surface, the overall diffusion barrier of Si(Ge) along direction is relative fast with a barrier of ∼0.83(0.61) eV, despite of the large surface undulation. This indicates that the adatoms can rapidly diffuse up and down the (1 0 5)-faceted Ge hut island. The diffusion is also almost isotropic along [0 1 0] and directions.     

NO dissociation pathways on Rh(1 0 0), (1 1 0), and (1 1 1) surfaces: A comparative density functional theory study

The chemisorption and dissociation pathways of NO on the Rh(1 0 0), (1 1 0), and (1 1 1) surfaces are studied by the plane-wave density functional theory (DFT) with CASTEP program. In addition, the electronic and geometrical effects that affect the NO dissociation reactions have been investigated in detail. The calculation results are presented as following: The effective activation energies of the best NO dissociation pathways on the Rh(1 0 0), the Rh(1 1 0), and the Rh(1 1 1) are 0.63, 0.66 and 1.77 eV, respectively. The activity of the Rh planes for NO dissociation is in the order of Rh(1 0 0) ≈ Rh(1 1 0) > Rh(1 1 1). The low dissociation barrier for Rh(1 0 0) and Rh(1 1 0) is associated with the existence of a lying-down NO structure which acts as a precursor for dissociation. By Mulliken population analysis and structure analysis, both electronic and geometrical effects are found to affect the NO dissociation reactions, but the geometrical effect exceed the electronic. The energy decomposition scheme has been used to provide further insight into the NO dissociation reactions. Based on the calculations, the interaction energy between N and O in the transition state on the Rh(1 1 1) is found much larger than that on the Rh(1 0 0) and the Rh(1 1 0). The major differences of should originate from the variation of the bonding competition effect.     

Edge-dimer row - The reason of three-bilayer steps and islands stability on Si(1 1 1)-7 × 7

A hypothesis of perpendicular dimer row formation along three-bilayer (3 BL) step was suggested. The hypothesis, explains the stability of 3 BL steps on the vicinal Si(1 1 1) surface deflected in direction as well as the limitation of Ge and Si island height by 3 BL at the initial nucleation stages on Si(1 1 1) surface. The detailed examinations of STM images of 3 BL steps were carried out. New peculiarities of atomic structure of 3 BL single step on Si(1 1 1) and 3 BL steps on Si(5 5 7) surfaces were revealed. The results of STM images examination verify the hypothesis of perpendicular dimer row formation along the boundary of the 3 BL step.     

Adsorption structure of germanium on the Ru(0 0 0 1) surface

Coverage-dependent adsorption energy of the Ge/Ru(0 0 0 1) growth system and the geometrical distortions of the most stable adsorption structure are investigated through first-principles calculations within density functional theory. A local minimum in adsorption energy is found to be at a Ge coverage of 1/7 monolayer with a Ru(0 0 0 1)- symmetry. Based on this stale superstructure, the scanning tunneling microscopy (STM) and scanning tunneling spectroscopy (STS) images are simulated by means of surface local-density of states (LDOS). The results are consistent well with the STM measurements on the phase for Ge overlayer on Ru(0 0 0 1). From this stimulation, the relations between the STM images and the lattice distortion are also clarified.     

Photoemission study of the Li/Ge(1 1 1)-3 × 1 reconstruction

In this article we report our findings on the electronic structure of the Li induced Ge(1 1 1)-3 × 1 reconstruction as determined by angle-resolved ultraviolet photoelectron spectroscopy (ARUPS) and core-level spectroscopy using synchrotron radiation. The results are compared to the theoretical honeycomb-chain-channel (HCC) model for the 3 × 1 reconstruction as calculated using density functional theory (DFT). ARUPS measurements were performed in both the and directions of the 1 × 1 surface Brillouin zone at photon energies of 17 and 21.2 eV. Three surface related states were observed in the direction. In the direction, at least two surface states were seen. The calculated band structure using the single-domain HCC model for Li/Ge(1 1 1)-3 × 1 was in good agreement with experiment, allowing for the determination of the origin of the experimentally observed surface states. In the Ge 3d core-level spectra, two surface related components were identified, both at lower binding energy with respect to the Ge 3d bulk peak. Our DFT calculations of the surface core-level shifts were found to be in fair agreement with the experimental results. Finally, in contrast to the Li/Si(1 1 1)-3 × 1 case, no double bond between Ge atoms in the top layer was found.     

Polarity inversion of GaN(0 0 0 1) surfaces induced by Si adsorption

We employ density-functional theory within the local-density approximation to study the structural and electronic properties of Si monolayers adsorbed at GaN(0 0 0 1) surfaces. We find that when the N atoms reside in the outermost layer of the surface, the (0 0 0 1) surface converts into a surface, giving rise to a polarity inversion. We explain this inversion as a charge compensation effect between the N dangling bonds states at the outermost surface layer and the Si donor state in the subsurface layer.     

Photoelectron spectroscopy study of Pb/Ag(1 1 1) in the submonolayer range

The vacuum deposition of Pb onto Ag(1 1 1) gives rise to two different surface structures depending on coverage and deposition temperature. At room temperature (RT), low energy electron diffraction (LEED) reveals a sharp reconstruction completed at 1/3 Pb monolayer (ML). Beyond, a close-packed Pb(1 1 1) incommensurate overlayer develops. At low temperature (LT, ∼100 K) the incommensurate structure is directly observed whatever the coverage, corresponding to the growth of close-packed two-dimensional Pb(1 1 1) islands. Synchrotron radiation Pb 5d core-level spectra clearly demonstrate that in each surface structure all Pb atoms have essentially a unique, but different, environment. This reflects the surface alloy formation between the two immiscible metals in the reconstruction and a clear signature of the de-alloying process at RT beyond 1/3 ML coverage.     

Stable surface termination on vicinal 6H-SiC(0 0 0 1) surfaces

Ordered nanofacet structures on vicinal 6H-SiC(0 0 0 1) surfaces, consisting of pairs of a (0 0 0 1) basal plane and a facet, are investigated in terms of stable surface stacking of the (0 0 0 1) basal planes. The surface termination of S3 (or S3*), i.e., ABC (or A*C*B*), was suggested by a structural model based on quantized step-bunching, which typically gives a one-unit-cell bunched step configuration at the facet. Here, we evaluate the surface termination at basal planes covered with a layer of silicon oxynitride by means of quantitative low-energy electron diffraction (LEED) analysis combined with scanning tunneling microscopy (STM), and show the validity of the structural model proposed.     

Electronic structure of the Sb-induced Si(1 1 3)2 × 5 surface

The surface electronic structure of Sb/Si(1 1 3)2 × 5 was investigated by angle-resolved photoemission spectroscopy experiments. This reveals Sb/Si(1 1 3)2 × 5 to have three surface bands with anisotropic two-dimensional characteristics. The band widths of the surface bands along is larger than along . The number of surface bands of Sb/Si(1 1 3)2 × 5 and their band dispersions along and are quite analogous with those of Sb/Si(1 1 3)2 × 2 composed of Sb adatom and Si tetramer chains. The electronic structure analogy suggests that Sb/Si(1 1 3)2 × 5 and Sb/Si(1 1 3)2 × 2 have common building blocks such as Sb adatom and Si tetramer chains.     

The local adsorption geometry and electronic structure of alanine on Cu{1 1 0}

The adsorption of alanine on Cu{1 1 0} was studied by a combination of near edge X-ray absorption fine structure (NEXAFS) spectroscopy, X-ray photoelectron spectroscopy (XPS) and density functional theory (DFT). Large chemical shifts in the C 1s, N 1s, and O 1s XP spectra were found between the alanine multilayer and the chemisorbed and pseudo-(3 × 2) alaninate layers. From C, N, and O K-shell NEXAFS spectra the tilt angles of the carboxylate group (≈26° in plane with respect to and ≈45° out of plane) and the C-N bond angle with respect to could be determined for the pseudo-(3 × 2) overlayer. Using this information three adsorption geometries could be eliminated from five p(3 × 2) structures which lead to almost identical heats of adsorption in the DFT calculations between 1.40 and 1.47 eV/molecule. Due to the small energy difference between the remaining two structures it is not unlikely that these coexist on the surface at room temperature.     

CO adsorption on the Cu(1 1 1) surface: A density functional study

The adsorption of CO on the Cu(1 1 1) surface has been studied with ab initio density functional theory. The adsorbate-metal system was analyzed with the local density approximation, the gradient corrected functional of Perdew and Wang and the B3LYP hybrid functional, for comparison. A slab model was used for the pattern at a coverage of 1/3. The local density approximation and the gradient corrected functional give the fcc site as the favorable adsorption site. In contrast, the B3LYP functional results in the preference of the top site, in agreement with the experiment. These results confirm the suggested explanation for the failure of standard functionals, based on the position of the highest occupied and lowest unoccupied molecular orbital. The results of total energy calculations are presented, together with projected densities of states and Mulliken populations. In addition, the basis set superposition error is discussed for CO/Cu(1 1 1) and for CO/Pt(1 1 1).     

Growth of well-aligned Bi nanowire on Ag(1 1 1)

We report the fabrication of one-dimensional (1D) Bi nanowires grown on Ag(1 1 1) with average lateral width from 9 to 20 nm by physical vapor deposition in ultra high vacuum conditions. In situ low-temperature scanning tunneling microscopy analyses reveal that the preferred growth of 1D Bi nanostructures is driven by the highly anisotropic bonding in the crystallographic structure of the Bi(1 1 0) plane. The Bi nanowires grow along direction and align with the directions on Ag(1 1 1). The growth of the Bi nanowires proceeds in a bilayer growth mode resulting from the layer pairing in Bi(1 1 0) which saturates the dangling bonds and lowers the total energy.     

Stranski-Krastanov like oxide growth on Ag(1 1 1) at atmospheric oxygen pressures

The oxidation behavior of Ag(1 1 1) was studied by means of in situ surface X-ray diffraction at atmospheric oxygen pressure. Exposure to 1 bar oxygen at 773 K reveals a competing growth of three different oxygen-induced structures on Ag(1 1 1), namely the well-known p(4 × 4) reconstruction, a surface oxide in a p(7 × 7) coincidence structure and the bulk oxide Ag₂O in orientation. The latter two exhibit the same honeycomb on hexagon arrangement of the Ag sublattice with respect to the Ag(1 1 1) surface. An inverted stacking of Ag planes in the bulk oxide islands is observed as compared to the Ag(1 1 1) substrate, which sheds new light on the Ag₂O formation process. Finally, we present a structural model of the p(7 × 7) reconstruction, based on a three-layer O-Ag-O slab of Ag₂O(1 1 1).     

Structural and statistical analysis of Yb/Si(1 1 1) and Eu/Si(1 1 1) reconstructions

We have performed the structural and statistical analysis of Yb/Si(1 1 1) and Eu/Si(1 1 1) surfaces in the submonolayer regime utilizing low-energy electron diffraction and scanning tunneling microscopy (STM). The almost identical series of one-dimensional chain structures (e.g., 3 × 2/3 × 1, 5 × 1, 7 × 1, 9 × 1, and 2 × 1 phases) are found in order of increasing metal coverage for both adsorbed systems, however, only the Eu/Si system reveals the ‘√3’-like reconstruction before the 2 × 1 endpoint phase. The atomic models of chain structures are proposed and discussed. In particular, our results suggest the odd-order n×1 (n=5,7,9,…) intermediate reconstructions to incorporate the Seiwatz chains and honeycomb chains with the proportion of m:1, where . The statistical analysis of STM images is carried out to examine the correlation of atomic rows on Eu/Si and Yb/Si surfaces. It is found that Eu stabilizes more ordered row configuration compared to Yb, which can be explained in terms of indirect electronic interaction of atomic chains or/and different magnetic properties of adsorbed species.