Polystyrene latex particles coated with crosslinked poly(N-isopropylacrylamide)

Thermoresponsive colloidal particles were prepared by seeded precipitation polymerization of N-isopropylacrylamide (NIPAM) in the presence of a crosslinking monomer, N,N-methylenebisacrylamide (MBA), using polystyrene latex particles (ca. 50 nm in diameter) as seeds in aqueous dispersion. Phase transitions of the prepared poly(N-isopropylacrylamide), PNIPAM, shells on polystyrene cores were studied in comparison to colloidal PNIPAM microgel particles, in H₂O and/or in D₂O by dynamic light scattering, microcalorimetry and by ¹H NMR spectroscopy including the measurements of spin–lattice (T1) and spin–spin (T2) relaxation times for the protons of PNIPAM. As expected, the seed particles grew in hydrodynamic size during the crosslinking polymerization of NIPAM, and a larger NIPAM to seed mass ratio in the polymerization batch led to a larger increase of particle size indicating a product coated with a thicker PNIPAM shell. Broader microcalorimetric endotherms of dehydration were observed for crosslinked PNIPAM on the solid cores compared to the PNIPAM microgels and also an increase of the transition temperature was observed. The calorimetric results were complemented by the NMR spectroscopy data of the ¹H-signal intensities upon heating in D₂O, showing that the phase transition of crosslinked PNIPAM on polystyrene core shifts towards higher temperatures when compared to the microgels, and also that the temperature range of the transition is broader.     

基于一种新型有机聚合物整体柱的毛细管电色谱技术用于利尿剂的分离与检测

采用自制的新型有机聚1-十六碳烯-三羟甲基丙烷三甲基丙烯酸酯［poly(1-hexadecene-co-TMPTMA)］整体柱,建立了一种同时分离检测6种利尿剂(氯噻酮、氢氯噻嗪、美托拉宗、吲哒帕胺、坎利酮和螺内酯)的毛细管电色谱(CEC)新方法,并成功应用于志愿者实际尿样的分析测定。在最佳实验条件下,6种利尿剂包含2种中性物质(坎利酮和螺内酯)和2种同分异构体(美托拉宗和吲哒帕胺)在11.0 min内得到基线分离,柱效分别达到218000、176000、143000、121000、108000、103000 塔板/m。6种利尿剂在1.15～86.0 μg/mL范围内呈良好的线性关系,相关系数R2 ≥0.990 8,检出限(LOD)在0.35～0.65 μg/mL范围内,回收率为81.9%~105%,相对标准偏差(RSD)小于4.7%。结果表明,实验所建立的基于poly(1-hexadecene-co-TMPTMA)整体柱的CEC方法,具有良好的重复性和稳定性,能够实现对多种利尿剂的同时分离检测。该方法已成功应用于来自志愿者实际尿样的分析,该方法可以用于利尿剂类药物的初筛。     

Synthesis and phase separation of amine-functional temperature responsive copolymers based on poly(N-isopropylacrylamide)

Free radical copolymerizations of N-isopropyl acrylamide (NIPAM) and cationic N-(3-aminopropyl) methacrylamide hydrochloride (APMH) were investigated to prepare amine-functional temperature responsive copolymers. The reactivity ratios for NIPAM and APMH were evaluated in media of different ionic strength (r_NIPAM = 0.7 and r_APMH = 0.7-1.2). Phase separation behavior of the random copolymers with only 5 mol% of the APMH was found to be suppressed in pure water at temperatures up to 45 °C due to electrostatic repulsion among the cationic amine groups randomly distributed along the copolymer chain. Alternate sequential addition of PNIPAM/APMH mixtures and pure NIPAM was used to provide increased control of the location of APMH units along the chain. Consequently (close to) homo-PNIPAM block(s) were formed as evidenced by its characteristic phase transition at 33 °C. The influences of the monomer feeding time and feeding interval time to the APMH distribution were investigated to prepare copolymers with thermo-induced phase separation under physiologically relevant temperature and to determine the extent of conjugation to poly(ethylene oxide).     

原位聚合法制备碳十八甲基丙烯酸酯聚合物及其用作开管毛细管电色谱固定相

以十八碳醇甲基丙烯酸酯为单体、乙二醇二甲基丙烯酸酯为交联剂,采用原位聚合法合成了一种新型毛细管开管柱固定相,优化了毛细管开管柱的制备参数。柱内表面的电镜图像显示其具有多孔皱褶、质地均匀的结构特征。将其应用于甲苯、乙苯、丙苯、丁苯、戊苯和己苯的分离试验中,6种化合物达到了完全分离,出峰顺序与它们的疏水性一致,表明该柱有明显的疏水色谱作用。在10 mmol/L磷酸盐(pH 8.5,含50%(v/v)乙腈)流动相、16 kV电压下,该开管柱成功地分离了4种抗癫痫类药物,柱效范围为35300~49800 塔板/m,与空柱管相比分离效果明显提高。结果表明通过本实验的原位聚合法可制备具有反相色谱作用的有机基质碳十八开管毛细管电色谱柱。     

动态磁涂覆混合固定相开管毛细管电色谱中电渗流的特征

将表面分别被改性成C18和氨基的磁性纳米颗粒按照不同比例混合,制备成具有不同分离选择性的混合固定相,进一步采用动态磁涂覆的方法制备开管毛细管电色谱柱。通过考察这种色谱柱中不同种类固定相表面物理化学性质对电渗流的综合影响,从理论上说明了其电渗流的特征。分别在不同固定相配比及不同涂覆长度条件下进行实验,理论与实验结果相符,证实通过调节固定相配比或磁铁对数可以便捷地调节电渗流的大小。     

Thermoresponsive nanostructured poly(N-isopropylacrylamide) hydrogels made via inverse microemulsion polymerization

The synthesis of nanostructured poly(N-isopropylacrylamide) (polyNIPA) hydrogels by a two-stage polymerization process is reported here. The process involves the synthesis of slightly crosslinked polyNIPA nanoparticles by inverse (w/o) microemulsion polymerization; then, these particles are dried, cleaned and dispersed in an aqueous solution of NIPA and a crosslinking agent (N,N-methylene-bis-acrylamide or NMBA) and polymerized to produce the nanostructured hydrogels. Their swelling and de-swelling kinetics, volume phase transition temperatures (T _VPT) and mechanical properties at the equilibrium swollen state are investigated as a function of the weight ratio of polyNIPA particles to monomer (NIPA). The nanostructured gels exhibit larger equilibrium water uptake, faster swelling and de-swelling rates and similar T _VPT than those of the conventional ones; moreover, the elastic and Young moduli are larger than those of the conventional hydrogels at similar swelling ratios. The fast swelling and de-swelling kinetics are explained in terms of the controlled inhomogeneities introduced by the method of synthesis.     

Analyses of synthetic antioxidants by capillary electrochromatography using poly(styrene-divinylbenzene-lauryl methacrylate) monolith

In this study, several organic polymer-based monoliths prepared by single step in situ copolymerization of styrene- and methacrylate ester-based monomers (styrene (S), divinylbenzene (DVB) and lauryl methacrylate (LMA)) were developed as stationary phases of capillary electrochromatography (CEC) for the analyses of synthetic antioxidants. These monoliths were characterized by examining the SEM image, IR spectrum, and measuring the pore size, surface area, conversion yield, and thermal decomposition temperature. The polymerization procedure was optimized by varying the reaction temperature, the reaction time, and the LMA-styrene ratio. The LMA-styrene ratio had the most significant influence on the peak symmetry of butylated hydroxyanisole (BHA) and 2, 6-di-tert-butyl-4-methyl phenol (BHT), the latter being greatly affected by excessive peak tailing in the poly(S-DVB) monolith. It showed that the interaction between the poly(S-DVB) monolith and the antioxidant (BHT or BHA) was significantly altered by the insertion of LMA. Compared with the best HPLC and CE methods previously reported, this proposed CEC method provides a comparable separation ability for the five antioxidants analyzed. This study demonstrates that the potentiality of poly(S-DVB-LMA) monolith as stationary phase, especially for CEC system, because of high thermal stability and good column reproducibility.     

Study on interaction between Tb(III) and poly(N-isopropylacrylamide)

A new kind of the thermo-sensitive and fluorescent complex of poly(N-isopropylacrylamide) (PNIPAM) and Tb(III) was synthesized by free radical polymerization, in which PNIPAM was used as a polymer ligand. The complex was characterized by using X-ray photoelectron spectroscopy (XPS), ultraviolet-visual (UV), Fourier transform infrared (FT-IR) and fluorescence spectroscopy. The results from the experiments indicated that there is a strong interaction between PNIPAM and Tb(III), leading to a decrease in the electron density of nitrogen and oxygen atoms and an increase in the electron density of Tb(III) in the PNIPAM containing Tb(III) by contrast with PNIPAM and Tb(III), respectively, meanwhile, exhibiting that the Tb(III) is mainly bonded to oxygen atoms in the polymer chain of PNIPAM and formed the complex of PNIPAM-Tb(III). After forming the PNIPAM-Tb(III) complex, the emission fluorescence intensity of Tb(III) in the PNIPAM-Tb(III) complex is significantly enhanced because the effective intramolecular energy transfer from PNIPAM to Tb(III). Especially, the emission intensity of the fluorescence peak at 547 nm can be increased as high as 145 times comparing with that of the pure Tb(III). The intramolecular energy transfer efficiency for fluorescence peak at 547 nm can reach as high as 68%. The fluorescence intensity is related the weight ratio of Tb(III) and PNIPAM in the PNIPAM-Tb(III) complex. When the weight ratio is 1.4%, the maximum fluorescence enhancement can be obtained. Nevertheless, the lower critical solution temperature of PNIPAM containing a low content of Tb(III) has not obviously changed after the formation of the complex of PNIPAM-Tb(III) by the interaction between PNIPAM and Tb(III). This novel thermosensitive and fluorescence characterization of the PNIPAM-Tb(III) complex may be useful in the fluorescence systems and the biomedical field.     

Volume phase transition and structure of poly(N-isopropylacrylamide) microgels studied with 1H-NMR spectroscopy in D2O

Thermoresponsive colloidal microgels were prepared by polymerisation of N-isopropylacrylamide (NIPAM) with varying concentration of a cross-linking monomer, N,N-methylenebisacrylamide (MBA), in water with either 0.4 or 6.7 mM concentration of an anionic surfactant, sodium dodecylsulphate (SDS). Volume phase transitions of the prepared microgels were studied in D₂O by ¹H-NMR spectroscopy including the measurements of spin–lattice (T1) and spin–spin (T2) relaxation times for the protons of poly(N-isopropylacrylamide) (PNIPAM) at temperature range 22–50 °C. In addition, microcalorimetry, turbidometry, dynamic light scattering and electrophoretic mobility measurements were used to characterise the aqueous microgels. The results from the different characterisation methods indicated that PNIPAM microgels prepared in 6.7 mM SDS concentration are structurally different compared to their correspondences prepared in 0.4 mM concentration. Increasing MBA concentration in the microgel synthesis appears to increase the structural heterogeneity in both cases of SDS concentration. PNIPAM structures with significantly higher molecular mobilities at temperatures above 35 °C were observed in the microgels prepared in 0.4 mM SDS concentration, as indicated by the ¹H NMR relaxation times of different PNIPAM protons. We conclude that the high mobilities measured with NMR at elevated temperatures and also the clearly negative values of zeta potential are in connection to a fairly mobile surface layer with polyelectrolyte nature and a consequent high local lower critical solution temperature.     

Coil-to-globule-type transition of poly(N-isopropylacrylamide) adsorbed on colloidal silica particles

 The temperature dependence of the dimensions of poly(N-isopropylacrylamide) (PNIPAM) adsorbed on two different colloidal silica particles was studied with dynamic light scattering. The hydrodynamic diameter was measured when the temperature was varied stepwise from 10 to 60 °C. PNIPAM molecules free in solution undergo a conformational transition at the θ temperature. We have found that PNIPAM adsorbed onto silica particles also undergoes a transition below the θ temperature. When a small amount of polymer was adsorbed the coil-to-globule transition at the θ temperature did not occur. Potentiometric titrations showed that the surface charge of the silica particles was not affected by the polymer adsorption. Sodium dodecyl sulfate (SDS) (100–1200 mg/l) was added to improve the stability. The particles with a higher zeta potential required a smaller addition of SDS to prevent coagulation compared to the particles with a smaller surface potential. For low additions of SDS the transition curves of adsorbed PNIPAM were unaffected. For larger additions of SDS the collapse of PNIPAM was shifted to higher temperatures. When as much as 1200 mg/l SDS was added, two regions with weak transitions were observed before the collapse. It was also observed that the presence of SDS results in a smaller adsorption of PNIPAM onto the particles. The addition of SDS strongly increased the magnitude of the electrophoretic mobility of the polymer–particle unit. From the electrophoretic measurements an electrokinetic layer thickness was calculated and it was found to be smaller than the corresponding hydrodynamic layer thickness, as obtained by dynamic light scattering. Received: 14 December 1999/In revised form: 22 February 2000/Accepted: 6 March 2000     

Effects of synthesis-solvent on swelling and elastic properties of poly(N-isopropylacrylamide) hydrogels

Thermosensitive N-isopropylacrylamide (NIPA) hydrogels were synthesized by a free radical copolymerization with N,N′-methylenebisacrylamide (MBAA) in four solvents: water, ethanol, acetone and N,N-dimethylformamide. The swelling and elastic properties of the hydrogels were affected by the synthesis-solvents; the hydrogels (e.g. NIPA/MBAA = 1000/50 mol/m³-pre-gel solution) synthesized in water have smaller swelling volume and larger shear modulus at 10 °C than those synthesized in amphiphilic solvents. The network structure of hydrogels was estimated in terms of the conversion and two sorts of effective crosslinking density based on the Flory theory and the concentration of crosslinker. The hydrogels synthesized in water can have the microscopic inhomogeneous network arising from the entanglement of polymer chains, while the hydrogels synthesized in amphiphilic solvents can have the homogeneous network arising from the polymer concentration lower than the pre-gel solution and can be similar in network structure to the lightly crosslinked hydrogel synthesized in water.     

Poly(N-isopropylacrylamide)/poly[(N-acetylimino)ethylene] thermosensitive block and graft copolymers

Block and graft copolymers with poly(N-isopropylacrylamide) and poly[(N-acetylimino)ethylene] (PNAI) sequences were synthesized via PNAI derivatives (macroinitiators or macromers). The polymerization yields for block copolymers synthesized in ethanol, using the PNAI macroinitiator, were low (<10%), except where photochemical polymerization was applied. By contrast, for the copolymerizations of N-isopropylacrylamide with the PNAI macromers, performed in alcoholic solution, quite high polymerization yields, around 80-90%, were reached. ¹H-NMR and IR spectral and differential scanning calorimeter thermal data confirmed the copolymer formation. Thermosensitivity of the copolymers was investigated by means of turbidimetric technique as a function of their nature, average molecular weight and composition. It was found that the length of the chain of the PNAI macromer and the content in hydrophilic PNAI units of the resulted copolymer affected this behavior.     

The synthesis, characterisation, phase behaviour and swelling of temperature sensitive physically crosslinked poly(1-vinyl-2-pyrrolidinone)/poly(N-isopropylacrylamide) hydrogels

Physically crosslinked complexes of polyvinyl pyrrolidinone-poly (N-isopropylacrylamide) (PVP-PNIPAAm) were prepared by photopolymerisation from a mixture of the monomers 1-vinyl-2-pyrrolidinone and N-isopropylacrylamide. IR spectroscopy and calorimetry were used to characterise the resulting xerogels. By alternating the monomer feed ratio, copolymers were synthesised to have their own distinctive lower critical solution temperature (LCST). The transition temperature of the gels was established using cloud point measurement and modulated differential scanning calorimeter (MDSC). This ability to shift the phase transition temperature of the copolymers provides excellent flexibility in tailoring transitions for specific uses. Swelling experiments were performed on the copolymer disks in distilled water at varying temperatures to establish the behaviour of the gels above and below phase transition temperature. The results obtained show that below transition temperature, the gels are water soluble but above this temperature they are slightly less water soluble; significantly less water soluble; or water insoluble; depending on the composition and LCST of the gel.     

Preparation and characterization of temperature-responsive poly(N-isopropylacrylamide-co-N,N'-methylenebisacrylamide) monolith for HPLC

A temperature-responsive poly(N-isopropylacrylamide-co-N,N'-methylenebisacrylamide) [poly(NIPAAm-co-BIS)] monolith was prepared via a free-radical polymerization technique using an aqueous redox initiator in solution at -12°C. The effect of the % T (total monomer concentration/100 mL) and % C (cross-linker concentration/100 mL) on the visual form was investigated. The effect of the porogen on the pore structure was characterized by SEM. Under the optimum condition, the monolith for HPLC was successfully prepared and its mechanical strength and permeability have been studied. Furthermore, a temperature-dependent resolution of aromatic ketones was achieved using only water as mobile phase. The increasing interaction between solutes and the monolith was observed when temperature increased. The theoretical plate number of every analyte was more than 10(4).     

Thermosensitive aggregates self-assembled by an asymmetric block copolymer of dendritic polyether and poly(N-isopropylacrylamide)

An asymmetric linear-dendritic block copolymer of polyether dendrimer and poly(N-isopropylacrylamide) was prepared by an atom transfer radical polymerization method. The self-assembly behavior and thermosensitive property of this copolymer in water were studied by dynamic light scattering (DLS), transmission electron microscopy (TEM) and fluorescence probe spectroscopy. It was found that the thermosensitive phase transition takes place at the temperature of 37.5 °C; simultaneously the spherical aggregates grow into larger entangled nanotubules. The unique temperature-sensitive supramolecular aggregates may make them especially useful as intelligent capsules for drug delivery systems and as chemical sensors.     

Study on interaction between Tb(III) and poly(N-isopropylacrylamide)-g-poly(N-isopropylacrylamide-co-styrene) core-shell nanoparticles

Based on the synthesis of poly(N-isopropylacrylamide-co-styrene) P(NIPAM-co-St) and poly(N-isopropylacrylamide) (PNIPAM) grafted P(NIPAM-co-St) core-shell nanoparticle, a new kind of thermoresponsive and fluorescent complex of Tb(III) and PNIPAM-g-P(NIPAM-co-St) (PNNS) was successfully prepared. The PNNS-Tb(III) complex was characterized with the different techniques. It was found that when PNNS with the core-shell structure interact with Tb(III), Tb(III) mainly bonded to O of the carbonyl groups of PNNS, forming the novel PNNS-Tb(III) complex. After forming the complex, the emission fluorescence intensity of Tb(III) in the complex is significantly enhanced. Especially, the maximum emission intensity of the PNNS-Tb(III) complex at 545 nm is enhanced about 223 times comparing to that of the pure Tb(III) because the effective intramolecular energy transfer from PNNS to Tb(III). The intramolecular energy transfer efficiency from PNNS to Tb(III) reaches 50%. The fluorescence intensity is related the weight ratio of Tb(III) and PNNS in the PNNS-Tb(III) complex. When the weight ratio of Tb(III) and the PNNS is 12 wt%, the enhancement of the emission fluorescence intensity at 545 nm is highest. This novel fluorescence characterization of the PNNS-Tb(III) complex may be useful in the fluorescence systems and the biomedical field.     

Complexation between poly(N,N-diethylacrylamide) and poly(acrylic acid) in aqueous solution

The complexation between poly(N,N-diethylacrylamide) (PDEA) and poly(acrylic acid) (PAA) in aqueous solution was studied by viscometric, potentiometric, and fluorescence techniques. It was found that an interpolymer complex formed between the two polymers through hydrogen bonding interactions with the stoichiometry of r=0.6 (r is unit molar ratio of PAA/PDEA), and the complex formation show the dependence on pH values. The phase behaviour studies showed that the lower critical solution temperature of the PDEA-PAA aqueous solution gradually increased with the increasing of r from 0.01 to 0.15, until a soluble system in the whole temperature region was obtained, which remained in the range of r=0.15-0.3. At higher PAA concentrations, when r is above 0.3, the system appeared phase separation, and almost no temperature dependence was observed. Based on these conclusion and structure characteristics of PDEA and PAA, a model containing only short sequences of monomer residues was proposed for the structure of PDEA-PAA complex.     

Nano‐amylose‐2,3‐bis(3,5‐dimethylphenylcarbamate)‐silica hybrid sol immobilized on open tubular capillary column for capillary electrochromatography enantioseparation

The chiral organic‐inorganic hybrid materials can exhibit a high loading, and the chiral selector nanoparticles can create efficient stationary phases for open‐tubular capillary electrochromatography (OT‐CEC). Hence, a novel protocol for the preparation of an OT column coated with nano‐amylose‐2,3‐bis(3,5‐dimethylphenylcarbamate) (nano‐ABDMPC)‐silica hybrid sol through in situ layer‐by‐layer self‐assembly method was developed for CEC enantioseparation. By controlling the assembly cycle number of nano‐ABDMPC‐silica hybrid sol, a homogeneous, dense and stable coating was successfully prepared, which was confirmed by SEM and elemental analysis. As the main parameter influencing the chiral separating effect, the nano‐ABDMPC bearing 3‐(triethoxysilyl)propyl residues concentration was investigated. The experimental results showed that 10.0 mg/mL nano‐ABDMPC bearing 3‐(triethoxysilyl)propyl residues coated OT capillary column possessed chiral recognition ability toward the six enantiomers (phenylalanine, tyrosine, tryptophan, phenethyl alcohol, 1‐phenyl‐2‐propanol, and Tröger's base) at some of the different conditions tested. Additionally, the coated OT column revealed adequate repeatability concerning run‐to‐run, day‐to‐day and column‐to‐column. These results demonstrated the promising applicability of nano‐ABDMPC‐silica hybrid sol coated OT column in CEC enantioseparations.     

FTIR study on molecular structure of poly(N-isopropylacrylamide) in mixed solvent of methanol and water

The intrachain and interchain hydrogen bonding of poly(N-isopropylacrylamide) (PNIPA) and intermolecular hydrogen bonding between PNIPA chains and the solvent molecules in the mixed solvent of methanol and water have been quantitatively investigated by using Fourier transform infrared (FTIR) spectroscopy at 25 °C. In this spectroscopic system with curve fitting program, we found that in the C-H stretching region, both the N-isopropyl group and the backbone underwent conformational change upon the solvent composition. An analysis of the amide I band suggested that the amide groups of PNIPA were mainly involved in intermolecular hydrogen bonding with water molecules, and the polymer chains were flexible and disordered in the mixed solvent when the methanol volume fraction (χ_v) was lower than 15%. While χ_v was in the range of 15-65%, about 30% of these intermolecular hydrogen bonding between the polymer and water were replaced by intrachain and interchain hydrogen bonding, consequently, PNIPA shrinked as aggregates. If χ_v was above 65%, the interchain hydrogen bonding became predominant due to the solubility characteristics of amphiphilic methanol, and the PNIPA system was homogeneous solution again. We believe that the reentrant transition is related to the weaker interaction between PNIPA molecules and methanol-water complexes, (H₂O)_m(CH₃OH)_n (m/n = 5/1, 5/2, 5/3, 5/4, 5/5) as compared to that between PNIPA and free water or free methanol.