RAIRS investigations on the orientation and intermolecular interactions of adenine on Cu(1 1 0)

The adsorption of the DNA base adenine (C₅N₅H₅) on Cu(1 1 0) has been investigated as a function of coverage and temperature using reflection absorption infrared spectroscopy. These data provide important information on the nature of the local adsorbed complex and the intermolecular lateral interactions that come into play at high coverages. The RAIR spectra are consistent with an adsorption geometry in which the molecular ring is substantially tilted from the surface plane and in which the two amino hydrogens are equidistant from the surface, thus rationalising the appearance of a very strong βNH₂ scissoring mode, along with the activity of in-plane vibrational modes and the observation of the symmetric ν_symNH₂ stretch, but not the asymmetric ν_asymNH₂ stretch. In addition, coordination to the metal surface is proposed to occur at the N(9) position with a possible additional interaction through the N(3) position, both of which are the favoured coordination points in the metal complexes of adenine. This is a strong interaction and leads to a highly stable adsorbed layer. Our data also provide the first direct evidence of hydrogen bonding in the adlayer as coverage is increased, attributed to interactions between the amino group of one molecule and the N(1) and N(7) positions of a neighbouring species. When adsorption is carried out at room temperature, a very heterogeneous adlayer is created in which a diversity of molecular aggregates co-exist. However, upon annealing, a more ordered hydrogen bonded adlayer is formed in which one type of hydrogen bonding assembly is preferred. Finally, we propose that the hydrogen bonded assemblies created at a surface probably involve bent hydrogen bonds which arise from a compromise between the strong molecule-metal interactions that orientate the molecule and weaker lateral hydrogen bonding interactions that dictate the two-dimensional architecture.     

Deactivation of Pd particles supported on Nb2O5/Cu3Au(1 0 0): SFG and TPD studies from UHV to 100 mbar

Structural changes that occur on Pd-Nb₂O₅/Cu₃Au(1 0 0) model catalysts upon thermal annealing were followed by sum frequency generation (SFG) and temperature-programmed desorption (TPD) using CO as probe molecule. SFG experiments were performed both under ultrahigh vacuum and mbar pressure. Heating the catalyst to temperatures above 300 K lead to an irreversible 50% decrease in the CO adsorption capacity and modified the remaining adsorption sites. Alterations of the phase between resonant and non-resonant SFG signals upon annealing indicate a change in the electronic structure of the surface, which excludes Pd sintering or migration of Nb₂O₅ over Pd particles to cause the observed effect and rather suggests the formation of “mixed Pd-NbO_x” sites. The same changes in surface properties also occur during CO hydrogenation at 1 bar and high temperature, pointing to an involvement of “mixed Pd-NbO_x” sites in catalytic reactions.     

Surface (electro-)chemistry on Pt(1 1 1) modified by a Pseudomorphic Pd monolayer

The formic acid and methanol oxidation reaction are studied on Pt(1 1 1) modified by a pseudomorphic Pd monolayer (denoted hereafter as the Pt(1 1 1)-Pd_1 ML system) in 0.1 M HClO₄ solution. The results are compared to the bare Pt(1 1 1) surface. The nature of adsorbed intermediates (CO_ad) and the electrocatalytic properties (the onset of CO₂ formation) were studied by FTIR spectroscopy. The results show that Pd has a unique catalytic activity for HCOOH oxidation, with Pd surface atoms being about four times more active than Pt surface atoms at 0.4 V. FTIR spectra reveal that on Pt atoms adsorbed CO is produced from dehydration of HCOOH, whereas no CO adsorbed on Pd can be detected although a high production rate of CO₂ is observed at low potentials. This indicates that the reaction can proceed on Pd at low potentials without the typical “poison” formation. In contrast to its high activity for formic acid oxidation, the Pd film is completely inactive for methanol oxidation. The FTIR spectra show that neither adsorbed CO is formed on the Pd sites nor significant amounts of CO₂ are produced during the electrooxidation of methanol.     

Probing the properties of the (1 1 1) and (1 0 0) surfaces of LaB6 through infrared spectroscopy of adsorbed CO

The adsorption of carbon monoxide on the LaB₆(1 0 0) and LaB₆(1 1 1) surfaces was studied experimentally with the techniques of reflection absorption infrared spectroscopy and X-ray photoelectron spectroscopy. The interaction of CO with the two surfaces was also studied with density functional theory. Both surfaces adsorb CO molecularly at low temperatures but in markedly different forms. On the LaB₆(1 1 1) surface CO initially adsorbs at 90 K in a form that yields a CO stretching mode at 1502-1512 cm⁻¹. With gentle annealing to 120 K, the CO switches to a bonding environment characterized by multiple CO stretch values from 1980 to 2080 cm⁻¹, assigned to one, two, or three CO molecules terminally bonded to the B atoms of a triangular B₃ unit at the (1 1 1) surface. In contrast, on the LaB₆(1 0 0) surface only a single CO stretch is observed at 2094 cm⁻¹, which is assigned to an atop CO molecule bonded to a La atom. The maximum intensity of the CO stretch vibration on the (1 0 0) surface is higher than on the (1 1 1) surface by a factor of 5. This difference is related to the different orientations of the CO molecules on the two surfaces and to reduced screening of the CO dynamic dipole moment on the (1 0 0) surface, where the bonding occurs further from the surface plane. On LaB₆(1 0 0), XPS measurements indicate that CO dissociates on the surface at temperatures above 400 K.     

CO stretching vibrations on Pt(111) and Pt(110) studied by sumfrequency generation

Optical sum-frequency generation (SFG) is used to characterize CO stretching vibrations on Pt(111) and Pt(110) surfaces. Different adsorption sites (terminal, bridge and step sites) are identified in the SFG spectra of CO on Pt(111), in good quantitative agreement with previous infrared reflection-absorption experiments on this system. For CO on Pt(110) we only observe CO molecules on terminal sites. The measured CO stretching vibration frequencies on Pt(110), both for low and high coverages, are at variance with the results of previous infrared studies. Our SFG results for CO on Pt(110) are confirmed by independent EELS measurements which, in addition, also reveal the frustrated rotational mode and the metal-CO vibration. The measured frequency of 2065 cm⁻¹ for low CO coverage on Pt(110)-(1 × 2) is consistent with a previously proposed empirical relation between the frequency of an isolated adsorbed CO molecule and the coordination number of the binding Pt surface atom.     

Infrared reflection absorption spectral study for CO adsorption on Pd/Pt(1 1 1) bimetallic surfaces

Infrared reflection absorption spectroscopy (IRRAS) was used to investigate carbon monoxide (CO) adsorption on 0.15 nm-thick-0.6 nm-thick Pd-deposited Pt(1 1 1) bimetallic surfaces: Pd_x/Pt(1 1 1) (where x is the Pd thickness in nanometers) fabricated using molecular beam epitaxial method at substrate temperatures of 343 K, 473 K, and 673 K. Reflection high-energy electron diffraction (RHEED) measurements for Pd_0.15-0.6 nm/Pt(1 1 1) surfaces fabricated at 343 K showed that Pd grows epitaxially on a clean Pt(1 1 1), having an almost identical lattice constant of Pt(1 1 1). The 1.0 L CO exposure to the clean Pt(1 1 1) at room temperature yielded linearly bonded and bridge-bonded CO-Pt bands at 2093 and 1855 cm⁻¹. The CO-Pt band intensities for the CO-exposed Pd_x/Pt(1 1 1) surfaces decreased with increasing Pd thickness. For Pd_0.3 nm/Pt(1 1 1) deposited at 343 K, the 1933 cm⁻¹ band caused by bridge-bonded CO-Pd enhanced the spectral intensity. The linear-bonded CO-Pt band (2090 cm⁻¹) almost disappeared and the bridge-bonded CO-Pd band dominated the spectra for Pd_0.6 nm/Pt(1 1 1). With increasing substrate temperature during the Pd depositions, the relative band intensities of the CO-Pt/CO-Pd increased. For the Pd_0.3 nm/Pt(1 1 1) deposited at 673 K, the linear-bonded CO-Pt and bridge-bonded CO-Pd bands are located respectively at 2071 and 1928 cm⁻¹. The temperature-programmed desorption (TPD) spectrum for the 673 K-deposited Pd_0.3 nm/Pt(1 1 1) showed that a desorption signal for the adsorbed CO on the Pt sites decreased in intensity and shifted ca. 20 K to a lower temperature than those for the clean Pt(1 1 1). We discuss the CO adsorption behavior on well-defined Pd-deposited Pt(1 1 1) bimetallic surfaces.     

Reactivity of 3-hexyne on oxygen modified Ru(0 0 1) surfaces: Observation of oxametallacycles by RAIRS

The chemical behaviour of 3-hexyne on oxygen modified Ru(0 0 1) surfaces has been analysed under ultrahigh-vacuum, using reflection-absorption infrared spectroscopy (RAIRS). The effects of oxygen coverage, 3-hexyne exposure and adsorption temperature were studied. Two modified Ru(0 0 1) surfaces were prepared: Ru(0 0 1)-(2 × 2)-O and Ru(0 0 1)-(2 × 1)-O that correspond to oxygen coverages (θ_O) of 0.25 and 0.5 ML, respectively. The striking result is the direct bonding to an O atom when the modified surfaces are exposed to a very low dose (0.2 L) of 3-hexyne at low temperature (100 K). For θ_O = 0.25 ML, an unsaturated oxametallacycle [Ru-O-C(C₂H₅)C(C₂H₅)-Ru] is proposed, identified by RAIRS for the first time, through the νCC and νCO modes. Further decomposition at 110 K yields smaller oxygenated intermediates, such as acetyl [μ₃-η²(C,O)-CH₃CO], co-adsorbed with a small amount of carbon monoxide and non-dissociated species. The temperature at which a fraction of molecules undergoes complete C-C and C-H bond breaking is thus much lower than on clean Ru(0 0 1). The ultimate decomposition product observed by RAIRS at 220 K is methylidyne [CH]. Another key observation was that the adsorption temperature is not determinant of the reaction route, contrarily to what occurs on clean Ru(0 0 1): even when 3- hexyne strikes the surface at a rather high temperature (220 K), the multiple bond does not break completely. For θ_O = 0.5 ML, a saturated oxametallacycle [Ru-O-CH(C₂H₅)-CH(C₂H₅)-Ru] is also proposed at 100 K, identified by the ν_asO-C-C (at 1043 cm⁻¹) and ν_sO-C-C (at 897 cm⁻¹) modes, showing that some decomposition with C-H bond breaking occurs. For this oxygen coverage, the reaction temperatures are lower, and the intermediate surface species are less stable.     

Carbon monoxide adsorption on Co deposited Pt(1 0 0)-hex: IRRAS and LEED investigations

Infrared reflection absorption spectroscopy (IRRAS) was used to investigate carbon monoxide (CO) adsorption on Pt(1 0 0) surfaces deposited with Co layers with different thicknesses. Pt(1 0 0) surfaces cleaned in ultrahigh vacuum showed surface reconstruction, i.e., Pt(1 0 0)-hex: two absorption bands ascribable to adsorbed CO on the 1 × 1 surface and hex domains emerge at 2086 and 2074 cm⁻¹, respectively, after 1.0 L CO exposure. Deposition of a 0.3-nm-thick-Co layer on Pt(1 0 0)-hex at 333 K changes the low-energy electron diffraction (LEED) pattern from hex to p(1 × 1), indicating that the deposited Co lifts the reconstruction. The IRRAS spectrum for 1.0-L-CO-exposed Co_0.3 nm/Pt(1 0 0)-hex fabricated at 333 K yields a single absorption band at 2059 cm⁻¹. For Co_0.3 nm/Pt(1 0 0)-hex fabricated at 693 K, the LEED pattern shows a less-contrasted hex and the pattern remains nearly unchanged even after CO exposure of 11 L, although only 1.0 L CO exposure to Pt(1 0 0)-hex lifts the surface reconstruction. A Co_0.3 nm/Pt(1 0 0)-hex surface fabricated at 753 K exhibits an absorption band at 2077 cm⁻¹, which is considered to originate from CO adsorbed on the Pt-enriched surface alloy. Co_0.3 nm/Pt(1 0 0)-hex surfaces fabricated above 773 K show a clear hex-reconstructed LEED pattern, and the frequencies of the adsorbed CO bands are comparable to those of Pt(1 0 0)-hex, indicating that the deposited Co atoms are diffused near the surface region. The outermost surface of the 3.0-nm-thick-Co-deposited Pt(1 0 0)-hex is composed of Pt-Co alloy domains even at a deposition temperature of 873 K. Based on the LEED and IRRAS results, the outermost surface structures of Co_x/Pt(1 0 0)-hex are discussed.     

The adsorption of ethylene on Au/Pd(1 1 1) alloy surfaces

The adsorption of ethylene on gold-palladium alloys formed on a Pd(1 1 1) surface is investigated using a combination of temperature-programmed desorption (TPD) and reflection absorption infrared spectroscopy (RAIRS). Various alloy compositions are obtained by depositing four monolayers of gold on a clean Pd(1 1 1) surface and annealing to various temperatures. For gold coverages greater than ∼0.7, ethylene adsorbs primarily on gold sites, desorbing with an activation energy of less than 55 kJ/mol. At gold coverages between ∼0.5 and ∼0.7, ethylene is detected on palladium sites in a π-bonded configuration (with a σ-π parameter of ∼0.1) desorbing with an activation energy of between ∼57 and 62 kJ/mol. Further reducing the gold coverage leads to an almost linear increase in the desorption activation energy of ethylene with increasing palladium content until it eventually reaches a value of ∼76 kJ/mol found for ethylene on clean Pd(1 1 1). A corresponding increase in the σ-π parameter is also found as the gold coverage decreases reaching a value of ∼0.8, assigned to di-σ-bonded ethylene as found on clean Pd(1 1 1).     

Characterization of methylidyne on Pt(1 1 1) with infrared spectroscopy

Methylidyne (CH) was prepared on Pt(1 1 1) by three methods: thermal decomposition of diiodomethane (CH₂I₂), ethylene decomposition at temperatures above 450 K, and surface carbon hydrogenation. Methylidyne and its precursors are characterized by reflection absorption infrared spectroscopy (RAIRS). The C-I bond of diiodomethane breaks upon adsorption to produce methylene (CH₂), which decomposes to methylidyne at temperatures above 130 K. Above 200 K, methylidyne is the only hydrocarbon species observed with RAIRS, although reaction channels for the formation of methane (CH₄) and ethylene (C₂H₄) are indicated by temperature programmed desorption (TPD). As is well known from numerous previous studies, ethylene decomposes to ethylidyne (CCH₃) upon exposure to Pt(1 1 1) at 410 K. Upon annealing to 450 K, ethylidyne dissociates through two reaction pathways, dehydrogenation to ethynyl (CCH) and C-C bond scission to methylidyne. Ethylene dehydrogenation on the surface at 750 K and under low ethylene exposures produces surface carbon that can be hydrogenated to methylidyne with C-H and C-D stretch frequencies of 2956 and 2206 cm⁻¹, respectively. Hydrogen co-adsorption on the surface causes these frequencies to shift to higher values. Methylidyne is stable on Pt(1 1 1) to temperatures up to 500 K.     

Methanol adsorption on a CeO2(1 1 1)/Cu(1 1 1) thin film model catalyst

Adsorption and desorption of methanol on a CeO₂(1 1 1)/Cu(1 1 1) thin film surface was investigated by XPS and soft X-ray synchrotron radiation PES. Resonance PES was used to determine the occupancy of the Ce 4f states with high sensitivity. Methanol adsorbed at 110 K formed adsorbate multilayers, which were partially desorbed at 140 K. Low temperature desorption was accompanied by formation of chemisorbed methoxy groups. Methanol strongly reduced cerium oxide by forming hydroxyl groups at first, which with increasing temperature was followed by creation of oxygen vacancies in the topmost cerium oxide layer due to water desorption. Dissociative methanol adsorption and creation of oxygen vacancies was observed as a Ce⁴⁺ → Ce³⁺ transition and an increase of the Ce 4f electronic state occupancy.     

Search for adsorption potential energy minima of NO on Pt(9 9 7) at 11 K

We observed four kinds of adsorbed NO molecules on Pt(9 9 7) at 11 K using infrared reflection absorption spectroscopy (IRAS). The peaks at 1690, 1484 and 1615 cm⁻¹ are assigned to the N-O stretching modes of the on-top site and the hollow site on the terrace and the bridge site at the step, respectively. The 1385 cm⁻¹ peak is observed below ∼70 K. We assign the 1385 cm⁻¹ peak to the hollow site of the (1 1 1) microfacet at the step or the lower-terrace hollow site nearest to the step. By heating, site-to-site hopping to the more stable site occurs and the relative stability of four adsorption sites can be determined.     

A quantum-mechanical study of the vinyl fluoride adsorbed on the rutile TiO2(1 1 0) surface

The adsorption of vinyl fluoride on the rutile TiO₂(1 1 0) surface has been simulated, on the basis of a recently proposed experimental model, using hybrid-exchange density functional theory. Different surface coverages have been considered and the lateral interaction between adsorbed vinyl fluoride molecules has been quantified through a simple model of nearest and next nearest neighbouring molecules. The vibrational frequencies of the adsorbed molecule have been calculated and are found to be in excellent agreement with those observed providing support for the proposed adsorption model. The effect of the adsorption on the electronic structure of the molecule and the surface have been characterised by computing electrostatic potential maps and the local density of states.     

Sum frequency generation and density functional studies of CO-H interaction and hydrogen bulk dissolution on Pd(1 1 1)

CO-H interaction and H bulk dissolution on Pd(1 1 1) were studied by sum frequency generation (SFG) vibrational spectroscopy and density functional theory (DFT). The theoretical findings are particularly important to rationalize the experimentally observed mutual site blocking of CO and H and the effect of H dissolution on coadsorbate structures. Dissociative hydrogen adsorption on CO-precovered Pd(1 1 1) is impeded due to an activation barrier of ∼2.5 eV for a CO coverage of 0.75 ML, an effect which is maintained down to 0.33 ML CO. Preadsorbed hydrogen prevented CO adsorption at 100 K, while hydrogen was replaced from the surface by CO above 125 K. The temperature-dependent site blocking of hydrogen originates from the onset of hydrogen diffusion into the Pd bulk around 125 K, as shown by SFG and theoretical calculations using various approaches. When Pd(1 1 1) was exposed to 1:1 CO/H₂ mixtures at 100 K, on-top CO was absent in the SFG spectra although hydrogen occupies only threefold hollow sites on Pd(1 1 1). DFT attributes the absence of on-top CO to H atoms diffusing between hollow sites via bridge sites, thereby destabilizing neighboring on-top CO molecules. According to the calculations, the stretching frequency of bridge-bonded CO with a neighboring bridge-bonded hydrogen atom is redshifted by 16 cm⁻¹ when compared to bridging CO on the clean surface. Implications of the observed effects on hydrogenation reactions are discussed and compared to the C₂H₄-H coadsorption system.     

Growth of epitaxial thin Pd(1 1 1) films on Pt(1 1 1) and oxygen-terminated FeO(1 1 1) surfaces

Thin Pd films (1-10 monolayers, ML) were deposited at 35 K on a Pt(1 1 1) single crystal and on an oxygen-terminated FeO(1 1 1) monolayer supported on Pt(1 1 1). Low energy electron diffraction, Auger electron spectroscopy, and Kr and CO temperature programmed desorption techniques were used to investigate the annealing induced changes in the film surface morphology. For growth on Pt(1 1 1), the films order upon annealing to 500 K and form epitaxial Pd(1 1 1). Further annealing above 900 K results in Pd diffusion into the Pt(1 1 1) bulk and Pt-Pd alloy formation. Chemisorption of CO shows that even the first ordered monolayer of Pd on Pt(1 1 1) has adsorption properties identical to bulk Pd(1 1 1). Similar experiments conducted on FeO(1 1 1) indicate that 500 K annealing of a 10 ML thick Pd deposit also yields ordered Pd(1 1 1). In contrast, annealing of 1 and 3 ML thick Pd films did not result in formation of continuous Pd(1 1 1). We speculate that for these thinner films Pd diffuses underneath the FeO(1 1 1).     

Collision-induced migration of CO on Pt(9 9 7) surface

Lateral displacement of adsorbates induced by collisions with energy-controlled rare gas atoms was examined in an ultra high vacuum chamber using Fourier-transform infrared (FTIR) spectroscopy and a supersonic molecular beam apparatus. A stepped Pt(9 9 7) surface was exposed to CO molecules and subsequently to energy-controlled Ne or Ar atoms. There was no change in the CO stretching mode region of the FTIR spectrum of the Pt(9 9 7) surface after Ne atoms having an average translational energy of 0.23 eV were collided with it. However, when Ne atoms having an average translational energy of 0.56 eV were collided with the surface, the intensity of the peak assigned to the CO stretching mode at terrace sites decreased, while that at step sites increased with increasing the exposure to the Ne atoms. This is the demonstration of collision-induced migration, showing that CO molecules adsorbed at the terrace sites migrate laterally to the step sites upon collision with high-energy Ne atoms. In addition, the experimental results demonstrate the existence of an additional energy barrier for jumps across the steps. This investigation demonstrates an advantage of using a molecular beam for studying adsorbate migration.     

Ceria nanoformations in CO oxidation on Pt(1 1 1): Promotional effects and reversible redox behaviour

A well-defined CeO_x/Pt(1 1 1) model catalytic system has been fabricated using the self-assembling of Ce adatoms on a Pt(1 1 1) surface with a subsequent oxidation of the nucleating Ce submonolayer (0.3 ML). The resulting system of the “inverse supported catalyst” type consists of CeO_x nanoformations (2D islands of 5-15 nm size and ∼0.3 nm in height) more or less uniformly distributed over the Pt(1 1 1) surface. This CeO_x/Pt(1 1 1) system has been tested in the CO oxidation reaction where both the CO₂ production rate and the Ce oxidation state were monitored in situ. An enhanced reactivity and a remarkable shift of the bistable region of the reaction towards higher CO pressures were observed when compared to a clean Pt(1 1 1) surface. The CeO_x islands exhibit a pronounced redox behaviour that follows the hysteresis cycle of the reaction. The usefulness of such a type of the “inverse model catalyst” for studying the oxygen diffusion supply and the redox behaviour of ceria in the ceria-platinum catalysts is demonstrated.     

Controlling metal/oxide interactions in bifunctional nanostructured model catalysts: Pd and BaO on Al2O3/NiAl(1 1 0)

We have investigated the structure and growth of Pd and BaO containing nanoparticles sequentially co-deposited on an ordered Al₂O₃/NiAl(1 1 0) by scanning tunneling microscopy (STM), and their interaction with CO and NO₂ by infrared reflection absorption spectroscopy (IRAS).Ba deposition and subsequent oxidation result in Ba_xAl_2yO_x+3y nanoparticles being formed which are characterized by high particle densities and nucleation both on regular terraces and at oxide defects. In contrast, Pd interaction with the model support is weaker and preferential nucleation occurs mainly at rotational domain boundaries and to a lesser extent at anti-phase domain boundaries. For subsequent co-deposition of Pd on preformed Ba_xAl_2yO_x+3y/Al₂O₃/NiAl(1 1 0), Pd nucleates at the Ba_xAl_2yO_x+3y nanoparticles and covers them. The reverse deposition sequence, i.e. subsequent Ba co-deposition and oxidation on preformed Pd/Al₂O₃/NiAl(1 1 0), leads to formation of small isolated Ba_xAl_2yO_x+3y nanoparticles without contact to Pd, together with large Pd crystallites modified by Ba_xAl_2yO_x+3y. The present results provide control over the degree of interaction between metal nanoparticles and oxide nanoparticles on a well-defined model catalyst and thus allow us to study effects related effects on the reactivity and catalytic behavior.     

Coverage dependent promoter action: K coadsorption and reactions with CO and CO2 on Pd{1 1 0}

The adsorption of CO and CO₂ on K-predosed Pd{1 1 0} at room temperature has been examined via reflection–absorption infrared spectroscopy (RAIRS). CO₂ adsorbs on 0.37 ML K-predosed Pd{1 1 0} with high sticking probability and a reactive chemisorbed intermediate, CO₂⁻, is detected in RAIRS at room temperature. Reaction of this species ultimately yields carbonate. The same high K precoverage induces dissociation of CO at low CO exposure. Carbonate is detected at higher CO exposure and is probably produced via stepwise oxidation of molecularly adsorbed CO. In contrast at low K precoverage (0.11 ML), CO remains intact but the C–O bond is considerably weakened with respect to CO chemisorbed on clean Pd{1 1 0}. These findings illustrate a dual promoter mechanism of K in the adsorption and reaction of CO or CO₂ at high K coverage. The alkali metal induces dissociation of these molecules and directly participates in the formation of a surface compound, K₂CO₃.     

Electrochemical properties of palladium adlayers on Pt(1 0 0) substrates

The formation of submonolayers of palladium on well-defined Pt(1 0 0) electrodes is described. It has been found that the adsorption of NO at open circuit and its further reductive stripping enable the possibility to prepare Pt(1 0 0) electrodes fully covered by the first palladium layer, without contributions coming from palladium in the subsequent layers. This method enables a better characterization of the palladium islands formed in the submonolayer range. The CO displacement method points out that hydrogen and anion adsorption play a role in the charge transfer processes involved in the voltammetric profile. The analysis of the charge-potential curves is used to determine the values of the potentials of zero total charge (pztc) of the different adelectrodes. The pztc diminishes almost linearly with palladium coverage, this shift being related to increasing anion adsorption at low potentials. Adsorbed palladium does not electrocatalyze the oxidation of adsorbed CO.