Oxidation of low-index FeAl surfaces

The oxidation of the (100), (110) and (111) surfaces of the intermetallic compound FeAl has been investigated using LEED and XPS. On all three surfaces, oxidation at room temperature leads to the formation of an amorphous oxide film on top of an Al-depleted interlayer. The film growth can be divided into two regions of differing kinetics, i.e. the initial formation of a closed oxide film and a subsequent thickening. In the first region, the oxygen-uptake rate varies significantly with surface orientation, while in the thickening regime the uptake is the same for all surfaces. The maximum thickness as well as the composition of the oxide films were found to depend on the initial oxidation rate. At higher oxidation temperatures, ordered oxide films of around 5–8 Å in thickness are formed, very similar to those observed on NiAl. Photoemission spectra from these ordered phases showed evidence for Al atoms in two different chemical environments, i.e. the well-known oxide species in the interior of the film and an additional species present at the oxide/alloy interface.     

Interface effects for metal oxide thin films deposited on another metal oxide I. SnO deposited on SiO2

The growing mode of SnO overlayers deposited on SiO₂ has been studied by ISS and XPS. This study has shown that SnO spreads on the surface of SiO₂. The oxidation state of tin under different experimental conditions of preparation has been characterized by XPS and ELS and a procedure has been found to produce pure SnO. For comparison, SnO has been evaporated on highly oriented pyrolytic graphite (HOPG). In this case, independent of the deposited amount of SnO, XPS and ELS did not show any significant difference in the photoemission and loss features of this material as a function of coverage (i.e. there are no size effects). On the contrary, at low coverages of SnO deposited on SiO₂ XPS showed a shift of 1 eV in the BE of the Sn 3d_5/2 peak another of 1.7 eV in the values of the Auger parameter with respect to the values found for the bulk material. These shifts, very common on deposited metal particles, have been previously reported by us for TiO₂/SiO₂, and are tentatively attributed to t of the interaction of small deposits of SnO with the surface of SiO₂. The characterization by ELS and valence band photoemission of SnO completes the set of results reported in this paper.     

Alloy formation at the Ni–Al interface for nickel films deposited on Al(110) surfaces

Alloy formation at the Ni–Al interface for thin nickel films deposited on Al(110) surfaces has been studied using high-energy ion scattering/channeling (HEIS) and X-ray photoelectron spectroscopy (XPS). For nickel atoms deposited at room temperature on Al(110), a large amount of nickel–aluminum intermixing occurs at the interface. For the first two monolayers (ML) of deposited nickel, an NiAl-like compound is formed. The intermixing continues with a different rate, forming an Ni₃Al-like compound for nickel coverages from 2 to 8 ML, at which point a nickel metal film begins to grow on the surface. Nickel atoms deposited at 250°C on the Al(110) surface exhibit no surface compound formation, but diffuse up to 400 Å into the aluminum substrate. Interatomic potentials based on the embedded-atom method (EAM) are used in a Monte Carlo approach to simulate the evolution of the Ni–Al(110) interface as a function of the nickel coverage. The calculated ion-scattering yields and X-ray photoelectron intensities from nickel and aluminum atoms in these simulated interfaces are in good quantitative agreement with the experimental results. The simulations show a high-density Ni–Al alloy forming at the Al(110) surface which apparently inhibits outward diffusion of aluminum, leading to the more nickel-rich alloy and finally nickel film growth. The ion-scattering simulations show an unusually large amount of backscattering occurring below the Ni–Al(110) interface, apparently associated with defocusing of the incident ion beam.     

Model NSR catalysts: Fabrication and reactivity of barium oxide layers on Cu(1 1 1)

The growth of barium oxide on a Cu(1 1 1) substrate, formed by the deposition of barium and its subsequent oxidation, yields stable BaO films which expose predominantly the BaO(1 0 0) surface. The interaction of the oxide films with common components of motor-vehicle exhaust gases (CO₂, H₂O, NO_x) has been studied using surface analytical techniques, including X-ray photoelectron spectroscopy (XPS), temperature programmed desorption (TPD) and reflection IR spectroscopy (RAIRS). The spectroscopic identification of Ba(OH)₂, BaCO₃ and Ba(NO₂)₂ phases is discussed, and the relative stabilities and decomposition mechanisms of these materials when supported on Cu(1 1 1) is revealed by a combination of TPD and XPS. BaO is shown to be resistant to reaction with pure NO and NO/O₂ mixtures, but exposure to NO₂ leads to the rapid formation of barium nitrite. The formation of the nitrite is proposed to be the first-step in the production of barium nitrate, which has previously been shown to be the main phase involved in NO_x storage and reduction (NSR) catalysis.     

The effect of Pt on Ni3Al surface oxidation at low-pressures

The fully-oxidized surface that forms on (1 1 1) oriented Ni₃Al single crystals, with and without Pt addition, at 300-900 K under oxygen pressures of ca. 10⁻⁷ Torr was studied using XPS, AES, and LEIS. Two main types of surfaces form, depending upon oxidation temperature. At low-temperature, the predominant oxide is NiO, capped by a thin layer of aluminum oxide, which we refer to generically as Al_xO_y. At high-temperature (i.e., 700-800 K), NiO is replaced by a thick layer of Al_xO_y. By comparing samples that contain 0, 10 and 20 at.% Pt in the bulk, we find that the effect of Pt is to: (1) reduce the maximum amount of both NiO and Al_xO_y; and (2) shift the establishment of the thick Al_xO_y layer to lower temperatures. Platinum also decreases the adsorption probability of oxygen on the clean surface.     

Reactivities of ultrathin alumina films exposed to intermediate pressures of H2O: Substrate-mediated mechanism for growth and loss of surface order

The response of ordered ultrathin Al₂O₃ films on NiAl(1 1 0) and Ni₃Al(1 1 0) substrates to sequential exposures at varying pressures of H₂O between 10⁻⁷ Torr and 10⁻³ Torr, ambient temperature, was characterized by LEED, AES and density functional theory (DFT) calculations. In all cases, an increase in average oxide thickness, as determined by AES, was observed, consistent with a field-induced oxide growth mechanism. Ordered oxide films of initial average thicknesses of 7 Å and 12 Å grown on NiAl(1 1 0) achieved a limiting thickness of 17(1) Å, while films of initial thickness of 7 Å and 11 Å grown on Ni₃Al(1 1 0) achieved a limiting thickness of 12(1) Å. The LEED patterns for the thinner (7 Å) films were not observed after exposure to 10⁻⁵ Torr (NiAl(1 1 0)), or 10⁻⁴ Torr (Ni₃Al(1 1 0)). In contrast, LEED patterns for the films of greater initial thickness persisted after exposures to 10⁻³ Torr UHV. DFT calculations indicate an Al vacancy formation energy that is significantly greater (by ∼0.5 eV) on the surface that has the thicker oxide film, directly opposite to what may be naively expected. A simple coordination argument supports these numerical results. Therefore, the greater limiting oxide thickness observed on NiAl(1 1 0) demonstrates that the rate determining step in the oxide growth process is not Al removal from the metal substrate and transport across the oxide/metal interface. Instead, the results indicate that the determining factor in the oxide growth mechanism is the kinetic barrier to Al diffusion from the substrate bulk to the oxide/metal interface. The persistence of the LEED patterns observed for the films of greater initial oxide thickness indicates that the surface disorder generally observed for alumina films grown on aluminide substrates and exposed to intermediate pressures of H₂O is due to the growth of a disordered alumina layer over an ordered substrate, rather than to direct H₂O interaction with terrace sites.     

RT growth of acetonitrile and acrylonitrile on Si(0 0 1)-2 × 1 studied by XPS and LEED

In this work we show the adsorption of acetonitrile (CH₃CN) and acrylonitrile (CH₂CHCN) on Si(0 0 1)-2 × 1 at room temperature by increasing the molecular doses. Especially, by means of XPS and LEED data, we stress the action of these molecules on the silicon surface locating the dangling-bonds quasi-saturation within 10 L. The shortage of nitrogen XPS signal and some anomalies in carbon spectra point to an invading action from a traditional X-ray source (Al-K_α line) against chemisorbed molecules. In particular, we think that a long exposure to this radiation could break carbon-silicon bonds changing some adsorption geometries and making desorb molecular fragments.     

Initial growth of platinum on oxygen-covered Ni(1 1 0) surfaces

The initial growth of Pt on the Ni(1 1 0)-(3 × 1)-O and NiO(1 1 0) surfaces has been studied by coaxial impact collision ion scattering spectroscopy (CAICISS), low energy electron diffraction (LEED) and X-ray photoelectron spectroscopy (XPS). Prior to Pt deposition, the atomic structure of the near-surface regions of the Ni(1 1 0)-(3 × 1)-O and NiO(1 1 0) structures were studied using CAICISS, finding changes to the interlayer spacings due to the adsorption of oxygen. Deposition of Pt on the Ni(1 1 0)-(3 × 1)-O surface led to a random substitutional alloy in the near-surface region at Pt coverages both below and in excess of 1 ML. In contrast, when the surface was treated with 1800 L of atomic oxygen in order to form a NiO(1 1 0) surface, a thin Pt layer was formed upon room temperature Pt deposition. XPS and LEED data are presented throughout to support the CAICISS observations.     

Growth and oxidation of a Ni3Al alloy on Ni(1 0 0)

The growth and oxidation of a thin film of Ni₃Al grown on Ni(1 0 0) were studied using Auger electron spectroscopy (AES), low energy electron diffraction (LEED), and high resolution electron energy loss spectroscopy (EELS). At 300 K, a 12 Å thick layer of aluminium was deposited on a Ni(1 0 0) surface and subsequently annealed to 1150 K resulting in a thin film of Ni₃Al which grows with the (1 0 0) plane parallel to the (1 0 0) surface of the substrate. Oxidation at 300 K of Ni₃Al/Ni(1 0 0) until saturation leads to the growth of an aluminium oxide layer consisting of different alumina phases. By annealing up to 1000 K, a well ordered film of the Al₂O₃ film is formed which exhibits in the EEL spectra Fuchs-Kliewer phonons at 420, 640 and 880 cm⁻¹. The LEED pattern of the oxide shows a twelvefold ring structure. This LEED pattern is explained by two domains with hexagonal structure which are rotated by 90° with respect to each other. The lattice constant of the hexagonal structure amounts to ∼2.87 Å. The EELS data and the LEED pattern suggest that the γ^′-Al₂O₃ phase is formed which grows with the (1 1 1) plane parallel to the Ni(1 0 0) surface.     

Silicidation in Ni/Si thin film system investigated by X-ray diffraction and Auger electron spectroscopy

Silicide formation induced by thermal annealing in Ni/Si thin film system has been investigated using glancing incidence X-ray diffraction (GIXRD) and Auger electron spectroscopy (AES). Silicide formation takes place at 870 K with Ni₂Si, NiSi and NiSi₂ phases co-existing with Ni. Complete conversion of intermediate silicide phases to the final NiSi₂ phase takes place at 1170 K. Atomic force microscopy measurements have revealed the coalescence of pillar-like structures to ridge-like structures upon silicidation. A comparison of the experimental results in terms of the evolution of various silicide phases is presented.     

Ultra-thin film growth of titanium dioxide on W(1 0 0)

We have employed low energy electron diffraction (LEED) and X-ray photoelectron spectroscopy to follow the epitaxial growth of thin films of TiO₂ on W(1 0 0). The films were grown both by metal vapour deposition of titanium onto the substrate in UHV with subsequent annealing in a low partial pressure of oxygen, and by metal vapour deposition in a low partial pressure of oxygen. LEED patterns showed the characteristic patterns of (1 1 0) oriented rutile. A systematic spot splitting was observed and attributed to a stepped surface. The calculated step height was found to be in good agreement with that expected for rutile TiO₂(1 1 0), 3.3 Å. Titanium core level shifts were used to identify oxidation states as a function of film thickness allowing the interpretation in terms of a slightly sub-stoichiometric interface layer in contact with the substrate. In combination with the LEED patterns, the film structure is therefore determined to be (1 1 0) oriented rutile with a comparable level of stoichiometry to UHV prepared bulk crystals. The ordered step structure indicates considerable structural complexity of the surface.     

New interpretations of XPS spectra of nickel metal and oxides

A current interpretation of XPS spectra of Ni metal assumes that the main 6 eV satellite is due to a two hole c3d⁹4s² (c is a core hole) final state effect. We report REELS observation in AES at low voltages of losses (plasmons and inter-band transitions) corresponding to the satellite structures in Ni metal 2p spectra. The satellite near 6 eV is attributed to a predominant surface plasmon loss. A current interpretation of Ni 2p spectra of oxides and other compounds is based on charge transfer assignments of the main peak at 854.6 eV and the broad satellite centred at around 861 eV to the cd⁹L and the unscreened cd⁸ final-state configurations, respectively (L is a ligand hole). Multiplet splittings have been shown to be necessary for assignment of Fe 2p and Cr 2p spectral profiles and chemical states. The assignments of Ni 2p states are re-examined with intra-atomic multiplet envelopes applied to Ni(OH)₂, NiOOH and NiO spectra. It is shown that the free ion multiplet envelopes for Ni²⁺ and Ni³⁺ simulate the main line and satellite structures for Ni(OH)₂ and NiOOH. Fitting the NiO Ni 2p spectral profile is not as straightforward as the hydroxide and oxyhydroxide. It may involve contributions from inter-atomic, non-local electronic coupling and screening effects with multiplet structures significantly different from the free ions as found for MnO. A scheme for fitting these spectra using multiplet envelopes is proposed.     

Alloy formation of Co/Ni/Pt(1 1 1)

The initial growth and alloy formation of ultrathin Co films deposited on 1 ML Ni/Pt(1 1 1) were investigated by Auger electron spectroscopy (AES), low energy electron diffraction (LEED), and ultraviolet photoelectron spectroscopy (UPS). A sequence of samples of d_Co Co/1 ML Ni/Pt(1 1 1) (d_Co = 1, 2, and 3 ML) were prepared at room temperature, and then heated up to investigate the diffusion process. The Co and Ni atoms intermix at lower annealing temperature, and Co-Ni intermixing layer diffuses into the Pt substrate to form Ni-Co-Pt alloys at higher annealing temperature. The diffusion temperatures are Co coverage dependent. The evolution of UPS with annealing temperatures also shows the formation of surface alloys. Some interesting LEED patterns of 1 ML Co/1 ML Ni/Pt(1 1 1) show the formation of ordered alloys at different annealing temperature ranges. Further studies in the Curie temperature and concentration analysis, show that the ordered alloys corresponding to different LEED patterns are Ni_xCo_1−xPt and Ni_xCo_1−xPt₃. The relationship between the interface structure and magnetic properties was investigated.     

单晶Si表面离子束溅射沉积Co纳米薄膜的研究

采用离子束溅射沉积法，在单晶Si基片上制备了不同厚度(1—100nm)的Co纳米薄膜.利用原子力显微镜、X射线光电子能谱(XPS)仪和X射线衍射仪对不同厚度的Co纳米薄膜进行了分析和研究.结果表明：当薄膜厚度为1—10nm时，沉积颗粒形态随薄膜厚度增加将由二维生长的细长胞状过渡到多个颗粒聚集成的球状.当膜厚大于10nm时，小颗粒球聚集成大颗粒球，颗粒球呈现三维生长状态.表面粗糙度随膜厚的增加呈现先增加后减小的趋势，在膜厚为3nm时出现极值.XPS全程宽扫描和窄扫描显示：薄膜表面的元素成分为Co，化学态分别 关键词： 离子束沉积 纳米薄膜 X射线光电子能谱 X射线衍射     

Segregation of Pt at clean surfaces of (Pt, Ni)3Al

Experimental evidence for surface segregation of Pt at (1 1 1) surfaces of ternary (Pt, Ni)₃Al alloys is presented, based upon Auger electron spectroscopy, low energy ion scattering, and angle-resolved X-ray photoelectron spectroscopy. Density functional calculations in the dilute limit confirm that Pt segregation is energetically favored.     

Effect of freon flow rate on tin oxide thin films deposited by chemical vapor deposition

High quality fluorine-doped tin oxide (SnO₂:F) films on glass substrates were been prepared using chemical vapor deposition (CVD) method. The electrical properties, surface morphologies, structural properties and optical properties of the films were studied by varying the freon flow rates. The structure was analyzed by X-ray diffraction (XRD). Scanning electron microscopy (SEM) and atomic force microscopy (AFM) were used to study the morphology. Energy-dispersive spectroscopy (EDS) was conducted to understand the surface fluorine composition of the film. The results showed that crystalline structure of the film had a have cassiterite-like diffraction patterns with a preferred orientation of (1 1 0). Surface roughness was evaluated by atomic force microscopy, characterized by root mean square (RMS) and average value (Ra). The SnO₂:F resistivity decreased as the freon flow rate increased. The films had a uniform thickness and a transmittance of 80–90% within the visible region of the spectrum.     

Structural and compositional stability of Co oxide grown on (001) bct Co

Room temperature (RT) adsorption of oxygen on the (001) surface of metastable, cubic Co film epitaxially grown on a Fe substrate results in the formation of about 7 monolayers (ML) crystalline CoO film, in the typical rocksalt structure 45° rotated with respect to the square unit mesh of the underlying Co film. We investigated the stability of this oxide layer upon annealing in the RT–620 K temperature range, by means of primary-beam diffraction modulated electron emission (PDMEE), and X-ray photoelectron spectroscopy (XPS). For temperatures up to 570 K, film thickness and local order are preserved, in spite of an increasing number of Co and O atoms bonded in sites of reduced coordination. For larger temperatures, thickness also reduces, but the oxide film is still characterized by a high degree of CoO-like local order.     

Dissociative adsorption of NO on TiO2(1 1 0) argon ion bombarded surfaces

The interaction of NO with TiO₂(1 1 0) Ar⁺-ion-bombarded surfaces has been studied by X-ray photoelectron spectroscopy, ultraviolet photoelectron spectroscopy, Auger electron spectroscopy. Surfaces with different degrees of defects have been characterized by monitoring the evolution of the electronic structure of the surface, with the aim of studying the influence of the surface defects on the interaction with NO. The interaction was studied for exposures up to 500 L. However, the main effects occur already in the first 10 L. The exposure of the surfaces to NO resulted in the removal of defect sites without adsorption of N.     

Influence of oxygen partial pressure on the properties of pulsed laser deposited nanocrystalline zirconia thin films

ZrO₂ thin films were deposited at various oxygen partial pressures (2.0 × 10⁻⁵-3.5 × 10⁻¹ mbar) at 973 K on (1 0 0) silicon and quartz substrates by pulsed laser deposition. The influence of oxygen partial pressure on structure, surface morphology and optical properties of the films were investigated. X-ray diffraction results indicated that the films are polycrystalline containing both monoclinic and tetragonal phases. The films prepared in the oxygen partial pressures range 2.0 × 10⁻⁵-3.5 × 10⁻¹ mbar contain nanocrystals of sizes in the range 54-31 nm for tetragonal phase. The peak intensity of the tetragonal phase decreases with the increase of oxygen partial pressures. Surface morphology of the films examined by AFM shows the formation of nanostructures. The RMS surface roughness of the film prepared at 2.0 × 10⁻⁵ mbar is 1.3 nm while it is 3.2 nm at 3.5 × 10⁻¹ mbar. The optical properties of the films were investigated using UV-visible spectroscopy technique in the wavelength range of 200-800 nm. The refractive index is found to decrease from 2.26 to 1.87 as the oxygen partial pressure increases from 2.0 × 10⁻⁵ to 3.5 × 10⁻¹ mbar. The optical studies show two different absorption edges corresponding to monoclinic and tetragonal phases.     

Epitaxial growth of MnO/Ag(0 0 1) films

Among the 3d transition metal monoxides, MnO plays a particular role due to the high spin ground state of the 3d⁵ configuration of Mn²⁺. Therefore, MnO could be an excellent model system to investigate many kinds of spin dependent or magnetic interactions between electrons in the surface of an antiferromagnetic solid. But in practice, most experimental investigations on crystalline MnO(0 0 1) surfaces suffer from the bad structural quality of the surface of cleaved bulk crystals. In this paper, we report on the epitaxial growth of MnO/Ag(0 0 1) surfaces, which is proved to be a method to produce crystalline MnO(0 0 1) surfaces of high structural order.