A theoretical investigation on Pt3Sn(1 0 2) surface alloy and CO-Pt3Sn(1 0 2) system

The adsorption properties of CO on experimentally verified stepped Pt₃Sn(1 0 2) surface were investigated using quantum mechanical calculations. The two possible terminations of Pt₃Sn(1 0 2) were generated and on these terminations all types of possible adsorption sites were determined. The adsorption energies and geometries of the CO molecule for all those sites were calculated. The most favorable sites for adsorption were determined as the short bridge site on the terrace of pure-Pt row of the mixed-atom-ending termination, atop site at the step-edge of the pure row of pure-Pt-ending termination and atop site at the step-edge of the pure-Pt row of the mixed-atom-ending termination. The results were compared with those for similar sites on the flat Pt₃Sn(1 1 0) surface considering the fact that Pt₃Sn(1 0 2) has terraces with (1 1 0) orientation. The LDOS analysis of bare sites clearly shows that there are significant differences between the electronic properties of Pt atoms at stepped Pt₃Sn(1 0 2) surface and the electronic properties of Pt atoms at flat (1 1 0) surface, which leads to changes in the CO bonding energies of these Pt atoms. Adsorption on Pt₃Sn(1 0 2) surface is in general stronger compared to that on Pt₃Sn(1 1 0) surface. The difference in adsorption strength of similar sites on these two surface terminations is a result of stepped structure of Pt₃Sn(1 0 2). The local density of states (LDOS) of the adsorbent Pt and C of adsorbed CO was utilized. The LDOS of the surface metal atoms with CO-adsorbed atop and of their bare state were compared to see the effect of CO chemisorption on the electron density distribution of the corresponding Pt atom. The downward shift in energy peak in the LDOS curves as well as changes in the electron densities of the corresponding energy levels indicate the orbital mixing between CO molecular orbitals and metal d-states. The present study showed that the adsorption strength of the sites has a direct relation with their LDOS profiles.     

CO and O coadsorption on Pt3Sn studied by DFT: Changes in the adsorptive properties of the surface with alloying and coverage

Adsorption of CO and coadsorption of O and CO on Pt₃Sn(1 1 1) was studied using periodic DFT calculations. Calculations were performed on Pt(1 1 1) by using the same set of parameters and their results were used as reference basis. The calculations showed that the most stable configuration with the minimum energy for coadsorption of CO and O is CO adsorbed atop Pt and O adsorbed on fcc Pt2Sn hollow site and that the decrease in the adsorption strength of the system at a total surface coverage of 0.5 ML is by 0.063 eV as a result of coadsorption, with respect to the adsorption of one species individually. Results show that the interaction between the adsorbed CO and O is short range on PtSn alloy, contrary to that on pure Pt, and this is mainly related to stronger Sn–O bonds compared to Pt–O bonds which eventually reduce the surface strain at the coadsorption structure. There is a pronounced effect of total surface concentration on the adsorption energy of coadsorbed species; the adsorption strength is not directly proportional to the surface coverage but is also related to the distribution of the coadsorbed species on the surface.     

Nb3Sn��������CICC�ȶ��Է���

介绍了国内首个聚变堆用Nb3Sn超导磁体模型线圈。采用一维数学模型Gandalf对其管内电缆导体(CICC)结构的超导体稳定性进行仿真,得到了CICC稳定性裕度与磁场强度和运行电流之间的关系。这对于磁体的设计和运行都有十分重要的意义。     

Magnetization study of ITER-type internal-Sn Nb3Sn superconducting wire

Through magnetization measurement with a SQUID magnetometer the heat treatment optimization of an international thermonuclear experimental reactor （ITER）-type internal-Sn Nb3Sn superconducting wire has been investigated. The irreversibility temperature T^＊ （H）, which is mainly dependent on A15 phase composition, was obtained by a warming and cooling cycle at a fixed field. The hysteresis width △M（H） which reflects the flux pinning situation of the A15 phase is determined by the sweeping of magnetic field at a constant temperature. The results obtained from differently heat-treated samples show that the combination of T^＊ （H） with AM（H） measurement is very effective for optimizing the heat reaction process. The heat treatment condition of the ITER-type wire is optimized at 675℃/128 h, which results in a composition closer to stoichiometric Nb3Sn and a state with best flux pinning.     

机械合金化过程对硫化铋块体热电性能的影响机理

以机械合金化法(MA)结合放电等离子烧结技术(SPS)制备了Bi₂S₃多晶块体热电材料. 研究了MA过程中干磨转速、湿磨时间和湿磨介质对Bi₂S₃多晶热电材料电传输性能的影响. 分析了样品的物相, 观察了显微组织, 测试了电传输性能和热传输性能. 研究表明, 以无水乙醇为湿磨介质时, 随着湿磨时间的延长, 出现了微量Bi₂O₃第二相, 样品的晶粒尺寸减小, 电阻率大幅增加, 功率因子下降. 以丙酮为湿磨介质时, 虽然不存在微氧化反应, 但是由于样品中存在大量孔洞, 导致功率因子降低. 425 r/min 干磨15 h后未湿磨的样品在573 K取得最大的ZT值0.25, 是目前文献报道的最高值.     

焙烧温度对SiO2负载的Co3O4纳米粒子表面氧缺陷浓度和CO氧化催化性能的影响

以传统的浸渍法,在不同焙烧温度下制备了用于CO氧化反应的Co₃O₄/SiO₂催化剂．通过激光拉曼光谱(Raman)、X射线光电子能谱(XPS)、X射线衍射(XRD)、程序升温还原(TPR)和X射线吸收精细结构谱(XAFS)表征了该系列催化剂的结构．在所有的催化剂中,XRD和Raman光谱都只检测到了Co₃O₄晶相的存在．与Co₃O₄体相相比,XPS结果表明在200 oC焙烧的(Co₃O₄(200)/SiO₂)催化剂中Co₃O₄表面上存在着过量的Co²⁺．与XPS的结果一致,TPR结果表明Co₃O₄(200)/SiO₂催化剂中Co₃O₄表面上存在氧缺陷, 并且XAFS结果也表明Co₃O₄(200)/SiO₂催化剂中Co₃O₄具有更多的Co²⁺．提高焙烧温度使得过量的Co²⁺进一步氧化为Co³⁺,同时降低了表面氧缺陷浓度,从而得到计量比的Co₃O₄4/SiO₂催化剂．在所有的负载催化剂中Co₃O₄(200)/SiO₂催化剂表现出了最好的CO氧化催化性能,表明过量Co²⁺和表面氧缺陷的存在能够促进Co₃O₄催化CO氧化反应的活性.     

First-principles investigations of the Ni3Sn alloy at steam reforming conditions

The structure and surface composition of a Ni₃Sn alloy at conditions relevant for the steam reforming reaction was investigated using density functional theory calculations. Both the flat Ni₃Sn(0 0 0 1) surface and a surface with steps in the closed packed direction [1 0  0]were considered. The adsorption geometries and energies of the species CO, C, OH and H were calculated. Chemical potentials were used to map out which adsorbates are on the surface under varying conditions. It was found that adsorbates preferably bind to Ni as nearest neighbor with Sn as second-nearest neighbor. The binding energy is slightly stronger than on pure Ni. Adsorbate binding to Sn was found to be very unfavorable. Binding free energies indicate that at high temperature the alloy surface will be predominantly covered by CO and C, and at low temperatures one may find H and almost no OH. Even though the nominal composition of the investigated alloy is Ni₃Sn, the surface composition may differ significantly depending on temperature and pressure of the gas phase. This effect was investigated by calculating segregation energies both in the absence and in the presence of adsorbates. For the flat surface, it was found that only the bulk termination is present under relevant conditions. In contrast, it was found that for steps preferential adsorption of CO and C on Ni sites may lead to adsorption-induced segregation at temperatures below 400 °C. When taking segregation into account, the most stable Ni₃Sn surfaces will not bind CO or C at the same condition that Ni does. This is in excellent agreement with the previously proven ability of Ni-Sn alloys to inhibit graphite formation.     

Field suppression of the modulated phase of Ce2Pd2Sn

Low temperature magnetic (M) and thermal (C_P) properties of the intermetallic compound Ce₂Pd₂Sn have been investigated at zero and different magnetic fields. Two transitions were recognized at and , with latter nearly coinciding with the extrapolated Curie-Weiss temperature . The Curie factor evaluated from T≥T_M, is ≈2μ_B. The positive value of θ_P, the triangular coordination of the magnetic (Ce) atoms and the weak effect of applied magnetic field, reveal that T_M cannot be considered as a canonic antiferromagnetic transition like claimed in the literature. M(T) measurements under moderate magnetic fields () show T_C(B) increasing while T_M(B) is practically not affected. Both transition merge in a critical point at for , where the intermediate phase is suppressed. At , the cusp of a first order transition is observed in C_P(T). According to the proposed ferromagnetic ground state, it is followed by a C_P(T)∝T^3/2exp(-E_g/T) dependence, with a gap of anisotropy .     

A computational study on nanocrystalline SnO2: Adsorption of CO and O2 onto defective nanograins

This work presents a study of the adsorption properties of defective nanostructures. The calculations have quantum mechanical detail and are based on a semi-empirical Hamiltonian, which is applied to the evaluation of both the electronic structure and of the conductance. The material considered in this study, i.e. SnO₂, has a widespread use as gas sensor and oxygen vacancies are known to act as active catalytic sites for the adsorption of small molecules. In the following calculations crystalline SnO₂ nanograins, with a size and shape comparable with the experimental ones, have been considered. The grains lattice, which has the rutile structure of the bulk material, includes oxygen vacancies and the adsorbed system is generated by depositing a gaseous molecule, either CO or O₂, above an atom on the grain surface. The calculations show that the presence of the defects enhances the grain cohesion and favors adsorption. The conductance has a functional relationship with the structure and the defective state of the nanograins and its dependence on these quantities parallels the one of the binding energy.     

Effect of Li2O and CoO-doping of CuO/Fe2O3 system on its surface and catalytic properties

Physicochemical, surface and catalytic properties of pure and doped CuO/Fe₂O₃ system were investigated using X-ray diffraction (XRD), energy dispersive X-ray analysis (EDX), nitrogen adsorption at −196 °C and CO-oxidation by O₂ at 80-220 °C using a static method. The dopants were Li₂O (2.5 mol%) and CoO (2.5 and 5 mol%). The results revealed that the increase in precalcination temperature from 400 to 600 °C and Li₂O-doping of CuO/Fe₂O₃ system enhanced CuFe₂O₄ formation. However, heating both pure and doped solids at 600 °C did not lead to complete conversion of reacting oxides into CuFe₂O₄. The promotion effect of Li₂O dopant was attributed to dissolution of some of dopant ions in the lattices of CuO and Fe₂O₃ with subsequent increase in the mobility of reacting cations. CoO-doping led also to the formation of mixed ferrite Co_xCu_1−xFe₂O₄. The doping process of the system investigated decreased to a large extent the crystallite size of unreacted portion of Fe₂O₃ in mixed solids calcined at 600 °C. This process led to a significant increase in the S_BET of the treated solids. Doping CuO/Fe₂O₃ system with either Li₂O or CoO, followed by calcination at 400 and 600 °C decreased its catalytic activity in CO-oxidation by O₂. However, the activation energy of the catalyzed reaction was not much affected by doping.     

H2 分子在Li3N(110)表面吸附的第一性原理研究

采用第一性原理方法研究了H₂分子在Li₃N(110)晶面的表面吸附. 通过研究H₂/Li₃N(110)体系的吸附位置、吸附能和电子结构发现: H₂分子吸附在N桥位要比吸附在其他位置稳定,此时在Li₃N(110)面形成两个-NH基,其吸附能为1.909 eV,属于强化学吸附;H₂与Li₃N(110)面的相互作用主要是H 1s轨道与N 关键词： 第一性原理 3N(110)')" href="#">Li₃N(110) 2')" href="#">H₂ 吸附和解离     

Adsorption of CO, CO2 and NO molecules on a BaTiO3 (0 0 1) surface

Since the development of Scanning Tunnelling Microscopy (STM) technique, considerable attention has been devoted to various molecules adsorbed on various surfaces. Also, a new concept emerged with molecules on surfaces considered as nano machines by themselves. In this context, a thorough knowledge of surfaces and adsorbed molecules at an atomic scale are thus particularly invaluable. The present work describes the first Density Functional Theory (DFT) study of adsorption of CO, CO₂ and NO molecules on a BaTiO₃ surface following a first preliminary calculation of O and O₂ adsorption on the same surface. In the previously considered work, we found that a (0 0 1) surface with BaO termination is more stable than the one with TiO₂-termination. Consequently, we extended our study to CO, CO₂ and NO molecules adsorbed on a (0 0 1) surface with BaO termination. The present calculation was performed on a (1 × 1) cell with one monolayer of adsorbed molecules. Especially, a series of cases implying CO molecules adsorbed in various geometrical configurations has been examined. The corresponding adsorption energy varies in the range of −0.17 to −0.10 eV. The adsorption energy of a CO₂ molecule directly located above an O surface atom (called O_s) is of the order of −0.18 eV. The O-C distance length is then 1.24 Å and the O-C-O and O-C-O_s angles are 134.0° and 113.0°, respectively. For NO adsorption, the most important induced structural changes are the followings: (i) the N-O bond is broken when a NO molecule is absorbed on a Ba-O_s bridge site. In that case, N and O atoms are located above an O and a Ba surface atom, respectively, whereas the O-Ba-O_s and N-O_s-Ba angles are 106.5° and 63.0°, respectively. The N-O distance is as large as 2.58 Å and the adsorption energy is as much as −2.28 eV. (ii) In the second stable position, the NO molecule has its N atom adsorbed above an O_s atom, the N-O axis being tilted toward the Ba atom. The N-O_s-Ba angle is then 41.1° while the adsorption energy is only −0.10 eV. At last, the local densities of states around C, O as well as N atoms of the considered adsorbed molecules have also been discussed.     

Magnetic properties of Nd0.9Dy0.1Fe3(BO3)4

The magnetic properties of trigonal Nd_0.9Dy_0.1Fe₃(BO₃)₄ substituted compound with the competitive Nd-Fe and Dy-Fe exchange interactions have been investigated. It has been shown that in Nd_0.9Dy_0.1Fe₃(BO₃)₄ a spontaneous spin-reorientation transition from an ease-axis state to an easy-plane occurs near 8 K. Anomalies of the magnetization curves are observed in a spin-flop transition induced by the magnetic field B‖c. The calculations were performed using a molecular-field approximation and a crystal-field model for the rare-earth subsystem. Extensive experimental data on the magnetic properties of Nd_0.9Dy_0.1Fe₃(BO₃)₄ have been interpreted and good agreement between theory and experiment has been achieved using the obtained theoretical dependences.     

高压下Nb3Sn单晶的超导相转变

研究高压下Nb₃Sn单晶的超导相转变行为对探究力学变形诱导的材料超导性能弱化机理有重要意义。通过分子动力学模拟研究了Nb₃Sn单晶在高压下的原子尺度变形和晶体结构变化,在此基础上,建立了高压下Nb₃Sn单晶的超导相转变模型,模型预测结果与实验观测结果吻合较好。结果表明:静水压作用下,Nb₃Sn单晶体发生了明显的晶格畸变,但晶体结构保持完整;压力诱导的费米面上电子态密度的变化在高压下Nb₃Sn单晶体超导相转变中起主导作用。所得研究结果为研究高压下Nb₃Sn多晶体以及复合多晶体的相转变行为奠定了基础,同时有助于进一步认识Nb₃Sn材料超导性能的弱化机理。     

Effects of RE2O3 (RE = Tm, Sc, Yb) addition on the superconducting properties of ErBa2Cu3Oy

We investigated the effects of added Tm₂O₃, Sc₂O₃, and Yb₂O₃ on the superconducting properties of sintered Er123 samples. Tm₂O₃ addition caused the least T_c degradation, exhibiting a T_c above 90 K even for 17 vol% addition. Samples with added Sc₂O₃ maintained a T_c at above 90 K up to an addition of 7.2 vol%, while Yb₂O₃-containing samples showed a monotonic decrease in T_c with increased vol% of added Yb₂O₃. Tm₂O₃-containing samples exhibited a slight increase in J_c(0.1 T)/J_c(0) and had constant J_c values even for 17 vol% addition. XRD and SEM results indicate that the Tm₂O₃ is very stable in the superconducting matrix.     

Deposition and characterization of binary Al2O3/SiO2 coating layers on the surfaces of rutile TiO2 and the pigmentary properties

Binary Al₂O₃/SiO₂-coated rutile TiO₂ composites were prepared by a liquid-phase deposition method starting from Na₂SiO₃·9H₂O and NaAlO₂. The chemical structure and morphology of binary Al₂O₃/SiO₂ coating layers were investigated by Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, TG-DSC, Zeta potential, powder X-ray diffraction, and transmission electron microscopy techniques. Binary Al₂O₃/SiO₂ coating layers both in amorphous phase were formed at TiO₂ surfaces. The silica coating layers were anchored at TiO₂ surfaces via Si-O-Ti bonds and the alumina coating layers were probably anchored at the SiO₂-coated TiO₂ surfaces via Al-O-Si bonds. The formation of continuous and dense binary Al₂O₃/SiO₂ coating layers depended on the pH value of reaction solution and the alumina loading. The binary Al₂O₃/SiO₂-coated TiO₂ composites had a high dispersibility in water. The whiteness and brightness of the binary Al₂O₃/SiO₂-coated TiO₂ composites were higher than those of the naked rutile TiO₂ and the SiO₂-coated TiO₂ samples. The relative light scattering index was found to depend on the composition of coating layers.     

Effect of hydrogen-doping on bonding properties of Ti3SiC2

Using the first principles method based on the density functional theory, we investigated the effect of hydrogen-doping on bonding properties of Ti₃SiC₂. The formation energies of hydrogen interstitials in three possible positions were calculated. The results show that hydrogen favors residing near the (0 0 1) Si plane. In these positions, hydrogen is hybridized most with 1s states of lattice atoms (Si and C), instead of Ti. The presence of hydrogen does not substantially influence the bonding nature of Ti₃SiC₂; chemical bonding is characterized by the hybridizations of Ti d-Si p and Ti d-C p states, and yields high strength. This is contrary to hydrogen-doping in transition metals, where the electron of hydrogen fills in the d bands of the metals and, as a consequence, decreases the cohesive strength of the lattice.     

Effects of dopant concentrations on phosphorescence properties of Eu/Dy-doped Sr3MgSi2O8

Long afterglow Sr₃MgSi₂O₈: Eu, Dy phosphor with high brightness was prepared by sintering at high temperature and weak reductive atmosphere. The luminescent properties of this photoluminescent pigment were studied systematically by investigating concentration effects. The analytical results indicated that the main emission peaks appear at 482 nm. The excitation and emission spectra of this phosphor show that both of them are broadband. This is ascribed to the 4f⁷→4f⁶5d¹ transition of Eu²⁺ in the pigment matrix, which is in good agreement with the calculated value of 470 nm, and implies that luminescent centers Eu²⁺ occupy the deca-coordinated Sr²⁺ sites with the host of Sr₃MgSi₂O₈.     

Er3+/Yb3+共掺Gd3Sc2Ga3O12晶体的上转换发光

研究了提拉法生长的Er³⁺/Yb³⁺:Gd₃Sc₂Ga₃O₁₂和Er³⁺:Gd₃Sc₂Ga₃O₁₂晶体在室温下320—1700nm范围的吸收光谱和500—750nm范围内的上转换荧光谱,同时对其上转换荧光的可能发生机制、途径以及上转换过程可能对Er^{3+相似文献}   

Luminescence of La3F3[Si3O9]:Ce

The luminescence properties of Ce³⁺ in La₃F₃[Si₃O₉] are reported. Excitation and emission bands corresponding to 4f¹→5d¹ transitions of Ce³⁺ were identified. The center of gravity of the 5d states lies at remarkable high energy (43.2×10³ cm⁻¹) for Ce³⁺ in a silicate compound. This high value is attributed to the combined oxygen/fluoride coordination of the Ce³⁺ ion. Emission from the lowest 4f5d level to the ²F_5/2 and ²F_7/2 levels was found at 32.4×10³ and 30.4×10³ cm⁻¹. These results are compared with literature data on silicates and fluorides. From the values found for Ce³⁺, predictions are made for the positions of the 4f5d bands of Pr³⁺ and Er³⁺ in La₃F₃[Si₃O₉]. For both ions, it is concluded that in this host lattice emission is expected from high lying 4fⁿ energy levels.