Synthesis and crystallographic studies of garnet-type AgCa2Mn2V3O12 and NaPb2Mn2V3O12

High-purity powder specimens of AgCa₂Mn₂V₃O₁₂ and NaPb₂Mn₂V₃O₁₂ have been successfully synthesized by solid-state chemical reaction. The Rietveld refinements from X-ray powder diffraction data verified that these compounds have the garnet-type structure (space group , No. 230) with the lattice constant of a=12.596(2) Å for AgCa₂Mn₂V₃O₁₂ and a=12.876(2) Å for NaPb₂Mn₂V₃O₁₂. Calculation of the bond valence sum supported that Mn is divalent and V is pentavalent in these garnets. Estimation of the quadratic elongation and the bond angle variance showed that the distortions of the MnO₆ octahedra and the VO₄ tetrahedra are significantly suppressed. Our new results of AgCa₂Mn₂V₃O₁₂ and NaPb₂Mn₂V₃O₁₂ are compared to those of AgCa₂M₂V₃O₁₂ and NaPb₂M₂V₃O₁₂ (M=Mg, Co, Ni, Zn).     

Structural phase transition behaviour of ZnaSb3 and its substitutional compounds （Zn0.98M0.02）4Sb3 （M = Al,Ga and In） at low temperatures

Structural phase transitions of Zn4Sb3 and its substitutional compounds (Zn0.98M0.02)4Sb3 (M = Al, Ga and In) are investigated by electrical transport measurement and differential scanning calorimetry below room temperature. The results indicate that both β→α and α→α′ phase transitions of Zn4Sb3 are reversible and exothermic processes, which may be explained as that both the transitions originate from the ordering of the disordered interstitial Zn and vacancies in regular sizes. The derived activation energies of β→α and α→α′ phase transition processes for Zn4Sb3 are E1 = 3.9 eV and E2 = 4.1 eV, respectively. Although no remarkable influence on activation energy E2 is observed after Al doping, Al substitution for Zn causes E1 to increase to 4.6 eV, implying its suppression of βα transition to a great extent. Moreover, it is found that both βα and αα′ transitions are completely prohibited by substitution of either In or Ga for Zn in Zn4Sb3. The underlying mechanisms for these phenomena are discussed.     

Study on the photocatalytic activity of K2La2Ti3O10 doped with zinc(Zn)

The layered perovskite type oxides, K₂La₂Ti₃O₁₀ and zinc(Zn)-doped K₂La₂Ti₃O₁₀ were prepared by sol-gel method and were characterized by power X-ray diffraction, UV-vis diffuse reflectance and X-ray photoelectron spectroscopy. The photocatalytic activity for water splitting of the catalyst powders was investigated with I⁻ as electron donor under ultraviolet and visible light irradiation respectively. The electronic structure of the powders has been analyzed by the first principles calculation, which reveals the photo responses in the visible region and the improvement of the photocatalytic activity of K₂La₂Ti₃O₁₀. Conclusions were made that zinc(Zn)-doped K₂La₂Ti₃O₁₀ exhibited higher reactivity for hydrogen production. When I⁻ was used as electron donor, the optimum doping concentration of zinc(Zn) was found to be 0.015:1 (n_Zn:n_Ti). The average hydrogen production rates were 126.6 μmol/(gcat h) under ultraviolet irradiation and 55.5 μmol/(gcat h) under visible light irradiation which were raised by 131% and 251% compared with undoped K₂La₂Ti₃O₁₀ photocatalyst, respectively.     

Hydrothermal synthesis of C-doped Zn3(OH)2V2O7 nanorods and their photocatalytic properties under visible light illumination

A visible light-driven photocatalyst, C-doped Zn₃(OH)₂V₂O₇, prepared by a hydrothermal method was studied. The as-prepared catalyst was characterized by SEM, XRD, DRS, and XPS, and exhibited efficient photocatalytic activity in the degradation of methylene blue (MB) under visible-light irradiation. Besides decoloring, the decomposition of MB was also observed, further demonstrating the performance of the photocatalyst. The carbon existing on the surface of Zn₃(OH)₂V₂O₇ nanorods was free and in carbide form. Dye degradation followed first-order kinetics, and was explained on the basis of the Langmuir-Hinshelwood mechanism.     

Mn:BiFeO3/Zn:BiFeO3 bilayered thin films of (1 1 1) orientation

Ferroelectric and fatigue behavior of bilayered thin films consisting of Mn⁴⁺-modified BiFeO₃ and Zn²⁺-modified BiFeO₃, which were deposited on SrRuO₃-buffered Pt coated silicon substrates, were systematically investigated. The (1 1 1) orientation is induced for the BiFe_0.95Mn_0.05O₃/BiFe_0.95Zn_0.05O₃ bilayer, due to the introduction of the bottom BiFe_0.95Zn_0.05O₃ layer. With increasing the thickness ratio of the BiFe_0.95Mn_0.05O₃ layer, their leakage current decreases, and the fatigue endurance is greatly improved owing to the introduction of the BiFe_0.95Mn_0.05O₃ layer with a lower fatigue rate. The BiFe_0.95Mn_0.05O₃/BiFe_0.95Zn_0.05O₃ bilayer with the thickness ratio of 3:1 exhibits a larger remanent polarization of 2P_r ∼ 161.0 μC/cm² than those of bilayers with different thickness ratios, while their coercive field slightly increases with increasing the thickness ratio of the BiFe_0.95Mn_0.05O₃ layer.     

Optical properties of (ZnO)0.5(P2O5)0.5 glasses doped with Gd2O3:Eu nanoparticles and Eu2O3

Binary (ZnO)_0.5(P₂O₅)_0.5 glasses doped with Eu₂O₃ and nanoparticles of Gd₂O₃:Eu were prepared by conventional melt-quench method and their luminescence properties were compared. Undoped (ZnO)_0.5(P₂O₅)_0.5 glass is characterized by a luminescent defect centre (similar to L-centre present in Na₂O-SiO₂ glasses) with emission around 324 nm and having an excited state lifetime of 18 ns. Such defect centres can transfer the energy to Eu³⁺ ions leading to improved Eu³⁺ luminescence from such glasses. Based on the decay curves corresponding to the ⁵D₀ level of Eu³⁺ ions in both Gd₂O₃:Eu nanoparticles incorporated as well as Eu₂O₃ incorporated glasses, a significant clustering of Eu³⁺ ions taking place with the latter sample is confirmed. From the lifetime studies of the excited state of L-centre emission from (ZnO)_0.5(P₂O₅)_0.5 glass doped with Gd₂O₃:Eu nanoparticles, it is established that there exists weak energy transfer from L-centres to Eu³⁺ ions. Poor energy transfer from the defect centres to Eu³⁺ ions in Gd₂O₃:Eu nanoparticles doped (ZnO)_0.5(P₂O₅)_0.5 glass has been attributed to effective shielding of Eu³⁺ ions from the luminescence centre by Gd-O-P type of linkages, leading to an increased distance between luminescent centre and Eu³⁺ ions.     

Magnetic,electronic and structural properties of ZnxFe3−xO4

A series of samples Zn_xFe_3−xO₄ have been prepared by the chemical coprecipitation technique and characterized by X-ray diffraction (XRD), vibrating sample magnetometry (VSM) and X-ray photoelectron spectroscopy (XPS). XRD demonstrates all the samples of Zn_xFe_3−xO₄ have a spinel structure same as Fe₃O₄. The magnetic hysteresis loops of Zn_xFe_3−xO₄ obtained from VSM indicate that the saturation magnetization has a maximum when x is ∼1/3. The chemical states of Fe atoms and Zn atoms in zinc ferrites have been measured using XPS and Auger electron spectroscopy (AES). The Fe 2p core-level XPS spectra and Zn L₃M₄₅M₄₅ Auger peaks have been analyzed and the results have been discussed in correlation with the samples’ magnetic properties. These results suggest most of Zn atoms occupy the tetrahedral sites and a small amount of them occupy the octahedral sites.     

Facile fabrication of Zn/Zn5(OH)8Cl2·H2O flower-like nanostructure on the surface of Zn coated with poly (N-methyl pyrrole)

Zn/Zn₅(OH)₈Cl₂·H₂O flower-like nanostructures was electrodeposited on the coated Zn with poly (N-methyl pyrrole) in 0.1 M Zn (NO₃)₂ and 0.1 M KCl solution. The morphology and the structure of the Zn/Zn₅(OH)₈Cl₂·H₂O were characterized by Field Emission Scanning Electron Microscopy (FESEM), Fourier transform infrared (FT-IR) spectroscopy and X-ray diffraction analysis (XRD). The FT-IR results showed special peaks at 908 and 728 cm⁻¹ related to Zn₅(OH)₈Cl₂·H₂O. The FESEM results indicated that Zn/Zn₅(OH)₈Cl₂·H₂O consists of a flower-like nanostructure and these flower-shaped structures contain many shaped nanopetals with the thickness of 27.8 nm. The XRD result confirmed that the major phase of electrodeposited product in 0.1 M KCl as supporting electrolyte was Zn₅(OH)₈Cl₂·H₂O. The ability of PMPy to create a thin film and the existence of several pores in its matrix act as a mold for the growth of Zn/Zn₅(OH)₈Cl₂·H₂O flower-like nanostructure. The trapping of Cl⁻ and OH⁻ within pores can be considered as the reason for the formation of flowerlike Zn/Zn₅(OH)₈Cl₂·H₂O nanostructures in 0.1 M KCl.     

Dielectric and impedance measurements on (1−x)Ba(Fe1/2Ta1/2)O3-xBa(Zn1/3Ta2/3)O3 ceramics

In this work, ((1−x)Ba(Fe_1/2Ta_1/2)O₃-xBa(Zn_1/3Ta_2/3)O₃), ((1−x)BFT-xBZT) ceramics with x = 0.00–0.12 were synthesized by the solid–state reaction method. X-ray diffraction data revealed that both the powders and ceramics were of a pure-phase cubic perovskite structure. All ceramics showed large dielectric constants. For the x = 0.12 sample, a very high dielectric constant (>20,600) was observed. A lowering in the dielectric loss compared to pure BFT ceramics was observed with the BZT addition. The impedance measurements indicated that BZT has a strong effect on the bulk grain and grain boundary resistance of BFT ceramics. These results are in agreement with the measured dielectric properties. Based on dielectric and impedance results, (1−x)BFT-xBZT ceramics could be of great interest for high performance dielectric materials applications due their giant dielectric constant behavior.     

Synthesis and characterization of Mn-doped Zn2SiO4/SiO2 phosphor particles in core-shell structure

Manganese-doped zinc silicate (Zn₂SiO₄:Mn) is a kind of phosphor material that has a photo-luminescent (PL) and cathode-luminescent (CL) properties with intensive green light emission at 520 nm. The particles consisting of SiO₂@Zn₂SiO₄:Mn (SiO₂ core-Zn₂SiO₄:Mn shell) were synthesized via colloidal process and forced precipitation. After drying, the Zn/Mn precipitates were coated on the surface of SiO₂ particles. The Zn/Mn precipitates reacted with SiO₂ and transformed to Zn₂SiO₄:Mn by suitable calcination. The microstructure, crystalline phase, and luminescent characteristics of the products were studied. Besides, a CL device consisting of the core-shell powder was characterized.     

Study of the electron paramagnetic resonance spectra of Zn(antipyrine)2(NO3)2:VO

In this work, a full ligand-field energy matrix (10×10) diagonalization treatment for 3d¹ ions in tetragonal symmetry is developed on the basis of the two-s.o.-coupling-parameter model. Spin Hamiltonian parameters (g factors g_∥, g_⊥ and hyperfine structure constants A_∥, A_⊥) of the tetragonal V⁴⁺ center in Zn(antipyrine)₂(NO₃)₂ are calculated from the complete energy matrix diagonalization method and the perturbation theory method. The calculated results from both methods are not only close to each other but also in good agreement with the experimental values. Furthermore, the compressed defect structure of V⁴⁺ center is discussed.     

Synthesis of Y2O3:(Li,Eu) films using phosphor powders coated with SiO2 nano particles

Y_1.9−xLi_0.1Eu_xO₃ (x=0.02, 0.05, 0.08, and 0.12) films were fabricated by spin-coating method. A colloidal silica suspension with Y_1.9−xLi_0.1Eu_xO₃ phosphor powder was exploited to obtain the highly stable and effective luminescent films onto the glass substrate. After heating as-prepared Y_1.9−xLi_0.1Eu_xO₃ films at 700 °C for 1 h, the phosphor films exhibit a high luminescent brightness as well as a strong adhesiveness on the glass substrate. The emission spectra of spin-coated and pulse-laser deposited Y_1.82Li_0.1Eu_0.08O₃ films were compared. The cathodoluminescence of the phosphor films was carried out at the anode voltage 1 kV.     

Semiconductor-metal transition in v-doped Ti3O5

The semiconductor-metal transition in Ti₃O₅ is significantly affected by vanadium doping. The unit cell volume, ΔH, Δ? as well as Δ_χM decrease markedly up to 0.1% V₃O₅ and gradually thereafter until at ～ 10% V₃O₅, the transition disappears.     

Substrate effects on V2O3 thin films

We apply density functional theory and the augmented spherical wave method to analyze the electronic structure of V₂O₃ in the vicinity of an interface to Al₂O₃. The interface is modeled by a heterostructure setup of alternating vanadate and aluminate slabs. We focus on the possible modifications of the V₂O₃ electronic states in this geometry, induced by the presence of the aluminate layers. In particular, we find that the tendency of the V 3d states to localize is enhanced and may even cause a metal-insulator transition.     

Chemical quenching of positronium in Fe2O3/Al2O3 catalysts

Fe₂O₃/Al₂O₃ catalysts were prepared by solid state reaction method using α-Fe₂O₃ and γ-Al₂O₃ nano powders. The microstructure and surface properties of the catalyst were studied using positron lifetime and coincidence Doppler broadening annihilation radiation measurements. The positron lifetime spectrum shows four components. The two long lifetimes τ₃ and τ₄ are attributed to positronium annihilation in two types of pores distributed inside Al₂O₃ grain and between the grains, respectively. With increasing Fe₂O₃ content from 3 wt% to 40 wt%, the lifetime τ₃ keeps nearly unchanged, while the longest lifetime τ₄ shows decrease from 96 ns to 64 ns. Its intensity decreases drastically from 24% to less than 8%. The Doppler broadening S parameter shows also a continuous decrease. Further analysis of the Doppler broadening spectra reveals a decrease in the p-Ps intensity with increasing Fe₂O₃ content, which rules out the possibility of spin-conversion of positronium. Therefore the decrease of τ₄ is most probably due to the chemical quenching reaction of positronium with Fe ions on the surface of the large pores.     

Luminescence studies on ZnO-P2O5 glasses doped with Gd2O3:Eu nanoparticles and Eu2O3

Zinc phosphate glasses doped with Gd₂O₃:Eu nanoparticles and Eu₂O₃ were prepared by conventional melt-quench method and characterized for their luminescence properties. Binary ZnO-P₂O₅ glass is characterized by an intrinsic defect centre emission around 324 nm. Strong energy transfer from these defect centres to Eu³⁺ ions has been observed when Eu₂O₃ is incorporated in ZnO-P₂O₅ glasses. Lack of energy transfer from these defect centres to Eu³⁺ in Gd₂O₃:Eu nanoparticles doped ZnO-P₂O₅ glass has been attributed to effective shielding of Eu³⁺ ions from the luminescence centre by Gd-O-P type of linkages, leading to an increased distance between the luminescent centre and Eu³⁺ ions. Both doped and undoped glasses have the same glass transition temperature, suggesting that the phosphate network is not significantly affected by the Gd₂O₃:Eu nanoparticles or Eu₂O₃ incorporation.     

Synthesis and ion conductivity of (Bi2O3)0.75(Dy2O3)0.25 ceramics with grain sizes from the nano to the micro scale

Using (Bi₂O₃)_0.75(Dy₂O₃)_0.25 nano-powder synthesized by reverse titration co-precipitation method as raw material, dense ceramics were sintered by both Spark Plasma Sintering (SPS) and pressureless sintering. According to the predominance area diagram of Bi-O binary system, the sintering conditions under SPS were optimized. (Bi₂O₃)_0.75(Dy₂O₃)_0.25 ceramics with relative density higher than 95% and an average grain size of 20 nm were sintered in only 10 min up to 500 °C. During the pressureless sintering process, the grain growth behavior of (Bi₂O₃)_0.75(Dy₂O₃)_0.25 followed a parabolic trend, expressed as D² − D₀² = Kt, and the apparent activation energy of grain growth was found to be 284 kJ mol^− 1. Dense (Bi₂O₃)_0.75(Dy₂O₃)_0.25 ceramics with different grain sizes were obtained, and the effect of grain size on ion conductivity was investigated by impedance spectroscopy. It was shown that the total ion conductivity was not affected by the grain size down to 100 nm, however lower conductivity was measured for the sample with the smallest grain size (20 nm). But, although only the δ phase was evidenced by X-ray diffraction for this sample, a closer inspection by Raman spectroscopy revealed traces of α-Bi₂O₃.     

Influence of fluoride on f-f transitions of Eu in LiEuM2O8 (M=Mo, W)

The influence of fluoride on the luminescence of LiEuM₂O₈ (M=Mo, W) was studied. LiEuMo₂O₈ and LiEuW₂O₈ formed the whole range of solid solutions, which emitted intense red luminescence under the excitations by 395, 465 and 535 nm wavelengths. When doped with fluoride, the materials also formed solid solutions and the luminescent intensity was remarkably enhanced. The phosphor with optimized compositions in this system would be a promising red component for solid-state lighting devices based on GaN light-emitting diodes.     

Effect of composition on the conductivity of CTAB-butanol-octane-nitrate salts (Al(NO3)3 + Zn(NO3)2) microemulsions and on the surface and textural properties of resulting spinels ZnAl2O4

The conductivity σ of a microemulsion series consisting of CTAB + butanol + octane, in which a solution of Al(NO₃)₃ 0.8 M + Zn(NO₃)₂ 0.4 M was gradually added, was studied at room temperature as a function of its composition φ. The addition of nitrate salts solution took place in four different ratios of (butanol + CTAB):octane = 0.2, 0.4, 0.6 and 0.8. Initially, all those four systems are (water in oil, w/o) microemulsions and the gradual addition of the solution of the nitrate salts transforms them to bicontinuous ones. The conductivity increases gradually, but with different rate in each case, and the corresponding critical exponents at the percolation threshold were determined from the curves σ = f(φ). Next at three different compositions of microemulsions, corresponding to ratios (butanol + CTAB):octane = 0.4, 0.6 and 0.8 and ratio of the nitrate salts solution x ≈ 0.25, spinels ZnAl₂O₄ were isolated/prepared. XRD, SEM and N₂ adsorption-desorption measurements were used to determine the structure and texture of those solids. From those measurements the surface area (S_p), the pore volume (V_p), the size of crystallites and the average pore connectivity (c) were found. Those properties showed considerable variation and dependence on the composition of the original microemulsions employed in the preparation, a fact indicating that the structure and texture of the obtained solids can be manipulated at will via the composition of microemulsion used.     

A new self-activated yellow-emitting phosphor Zn2V2O7 for white LED

A new self-activated yellow-emitting Zn₂V₂O₇ phosphor was synthesized by high temperature solid-state reaction. X-ray powder diffraction (XRD) analysis confirmed the sample with monoclinic formation of Zn₂V₂O₇. The excitation and emission spectra indicated the phosphor can be efficiently excited by near ultraviolet (NUV) light in 220–400 nm range and exhibit a bright broad yellow emission with the highest emission intensity at 531 nm. The broad emission band from 400 to 650 nm can be attributed to the charge transfer transition in the VO₄ tetrahedra, which suggests that the phosphor is a promising yellow phosphor applied for white light-emitting diodes (WLED).