Effect of isoelectronic impurities K<Superscript>+</Superscript> and I<Superscript>−</Superscript> on luminescence of CsBr:Eu<Superscript>2+</Superscript> crystals

We have investigated the photoluminescence (PL) and photostimulated luminescence (PSL) spectra at 300 K to study the effect of isoelectronic impurities K⁺ and I⁻ on the formation and energy structure of Eu²⁺-V_Cs isolated dipole centers and aggregate centers in the form of single crystals of CsEuBr₃ in CsBr:Eu²⁺ single crystals. We have shown that K⁺ and I⁻ impurities in a concentration of 5 mol% do not have a substantial effect on the energy spectrum of isolated dipole centers in CsBr:Eu²⁺ single crystals and the processes for the formation of such centers during growth of CsBr:Eu single crystals from the melt by the Bridgman method. We have established that in Cs_0.95K^0.05Br:Eu²⁺, more favorable conditions are realized for the formation of aggregate centers than in CsBr:Eu²⁺ and CsBr^0.95K^0.05Br:Eu²⁺ single crystals. So in order to improve the storage properties of phosphors based on CsBr:Eu²⁺, in particular for increasing the efficiency of PSL excitation, it is expedient to dope them with K⁺ impurity in a concentration up to 5 mol%. __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 74, No. 5, pp. 627–630, September–October, 2007.     

Luminescence of aggregate centers in CsBr:Eu2+ single crystals

We have used the Bridgman method to grow CsBr:Eu²⁺ single crystals, adding an activator to the mix in the form of Eu₂O₃ in amounts of 0.0125, 0.0250, and 0.0500 mole %. At T = 300 K, we studied the absorption spectra, the photoluminescence (PL) spectra, and the photostimulated luminescence (PSL) spectra of the grown crystals. We have established that the structure of the photoluminescence and photostimulated luminescence centers in crystals grown from the CsBr:Eu₂O₃ mix includes isolated dipole centers Eu²⁺-V_Cs, emitting in bands with maxima at 432 nm and 455 nm respectively, and in crystals grown at activator concentrations of 0.025 and 0.050 mole % they also include aggregate centers (AC) based on CsEuBr₃ nanocrystals with emission bands at 515 m and 523 nm. We have shown that the maximum concentration of aggregate centers of the CsEuBr₃ nanocrystal type in CsBr:Eu²⁺ crystals is achieved for an activator content in the mix within the range 0.01–0.05 mole %. __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 73, No. 3, pp. 359–362, May–June, 2006.     

Luminescence studies of thallium co-doped KBr:Eu2+ powder phosphors

In this study, photoluminescence (PL) and photostimulated luminescence (PSL) properties in KBr:Eu²⁺, Tl⁺ powder phosphors are reported. PL emission spectra of these Tl⁺ co-doped KBr:Eu²⁺ phosphors show four overlapping bands around 310, 325, 360 and 375 nm in addition to the characteristic of Eu²⁺ ions at 420 nm. These additional short wavelength bands were attributed to centres involving Tl⁺ ions. The decrease in PSL intensity of γ-irradiated KBr:Eu²⁺, Tl⁺ powder phosphors with Tl⁺ concentration and the absence of thallium emission bands in PSL were attributed to the efficient electron trapping by Tl⁺ ions during irradiation.     

Specific features of absorption and luminescence in CsBr: EuOBr crystals

The specific features of the absorption, photoluminescence, x-ray luminescence, thermally stimulated luminescence, and photostimulated luminescence spectra of CsBr: Eu²⁺ single crystals grown using the Bridgman method are investigated in the temperature range 80–500 K at the highest possible dopant content (0.1–0.4 mol % EuOBr in the batch) required for preparing perfect crystals. It is shown that an increase in the dopant content leads to a broadening of the absorption and photoluminescence excitation bands with maxima at wavelengths of 250 and 350 nm due to the interconfigurational transitions 4f⁷(⁸S_7/2) → 4f⁶5d(e _g , t_2g) in Eu²⁺ ions. The photoluminescence and photostimulated luminescence spectra of CsBr: EuOBr single crystals (0.1–0.4 mol % EuOBr) contain a band at a wavelength of λ_max=450 nm and bands at wavelengths of λ_max=508–523 and 436 nm. The last two bands are assigned to Eu²⁺-V_Cs isolated dipole centers and Eu²⁺-containing aggregate centers, respectively. It is revealed that the intensity of the luminescence associated with the aggregate centers (λ_max=508–523 nm) is maximum at an EuOBr content of less than or equal to 0.1 mol % and decreases with an increase in the dopant content. The possibility of forming CsEuBr₃-type nanocrystals that are responsible for the green luminescence observed at a wavelength λ_max=508–523 nm in CsBr: Eu crystals is discussed. The intensity of photostimulated luminescence in the CsBr: EuOBr crystals irradiated with x-ray photons is found to increase as the dopant content increases. It is demonstrated that CsBr: EuOBr crystals at a dopant content in the range 0.3–0.4 mol % can be used as x-ray storage phosphors for visualizing x-ray images with high spatial resolution.     

新型电子俘获型材料β-Sr2SiO4:Eu2+, La3+长余辉和光激励发光性能的研究

通过高温固相法在还原气体保护下制备出β-Sr₂SiO₄: Eu²⁺, La³⁺系列样品. 通过样品光谱显示, 光致发光、余辉及光激励发光中心均来自于Eu²⁺离子; 并且La³⁺ 的掺入有效增强光致发光、余辉及光激励发光强度. 热释光与余辉衰减测试证明, 与单掺Eu²⁺样品所具备的缺陷数量相比, 共掺La³⁺样品在浅陷阱区(T1区)较多的俘获中心数量是导致其余辉性能优化的主要因素; 其光激励发光强度的增强则归因于在深陷阱(T3区)的俘获中心数量增加. 共掺样品放置15h并在980nm红外激光激励后, 表现出光激励长余辉发光现象. 此现象的出现, 为电子俘获型材料的浅陷阱对深陷阱中的载流子再俘获过程的存在提供了直接证据. 因此, β-Sr₂ SiO₄: Eu²⁺, La³⁺ 材料可视为一种潜在的长余辉和光激励发光材料.     

Influence of co-doping different rare earth ions on CaGa2S4: Eu, RE(RE=Ln) phosphors

Photoluminescent phosphors CaGa₂S₄: Eu²⁺, RE³⁺ (RE³⁺ including all rare earth ions except for Sc³⁺, Pm³⁺, Eu³⁺ and Lu³⁺) were prepared by sintering at high temperature in a reductive atmosphere, and their luminescent properties were studied intensively. The influences of co-doping rare earth ions on their luminescent properties were also investigated. No remarkable differences were found from excitation spectra of co-doped phosphors CaGa₂S₄: Eu²⁺, RE³⁺ in contrast with that of phosphor CaGa₂S₄: Eu²⁺, but there were a few differences in emission spectra of Ce³⁺, Pr³⁺ or Ho³⁺ co-doped phosphors. Phosphors CaGa₂S₄: Eu²⁺, RE³⁺ (RE=Ce, Pr, Gd, Tb, Ho and Y) had persistent afterglow, and very short afterglow was shown for Nd³⁺ or Er³⁺ co-doped phosphors, but no long afterglow appeared when auxiliary activator was La³⁺, Sm³⁺, Dy³⁺, Tm³⁺ or Yb³⁺. Among the phosphors with long-lasting phosphorescence, in our experiments, CaGa₂S₄: Eu²⁺, Ho³⁺ had the longest and the highest brightness long yellow afterglow. Thermo-luminescence of all co-doped phosphors was measured to find the answer of different influences from different rare earth auxiliary activators.     

Luminescence of CsBr:Eu films grown by liquid-phase epitaxy

By liquid-phase epitaxy from an aqueous alcoholic solution, we have obtained films of the well-known storage phospor CsBr:Eu, and we have studied their cathodoluminescence and photoluminescence (PL) spectra compared with the undoped CsBr films. We have established that the structure of the photoluminescence centers of the CsBr:Eu films when excited by laser radiation in the absorption band of the Eu²⁺ ions (λ = 337 nm) includes Eu²⁺-V_Cs isolated dipole centers and CsEuBr₃ aggregate centers, and also luminescence centers based on inclusions of hydroxyl group OH⁻ with the corresponding emission bands in the 440 nm, 520 nm, and 600 nm regions. We have studied the dependence of the spectra and the intensity of the photoluminescence for CsBr:Eu films on annealing temperature in air at 423–483 K, compared with analogous dependences for CsBr:Eu single crystals obtained from the melt. We have shown that annealing the films at T = 423–463 K leads to rapid formation of CsEuBr3 aggregate luminescence centers, while for T > 473 K thermal degradation of these centers occurs. We conclude that the observed differences between the photoluminescence spectra of CsBr:Eu films and CsBr:Eu single crystals may be due to additional doping of the films with OH⁻ ions. __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 73, No. 2, pp. 191–194, March–April, 2006.     

Radiation hardness of CsBr:Eu

In this study,results on the radiation damage of the storage phosphor CsBr:Eu²⁺ are presented. It is shown that a high X-ray dose causes a significant deterioration of the photostimulated luminescence accompanied by a degradation of the UV-excited Eu²⁺ fluorescence. Since no related dose-dependent increase of Eu³⁺ luminescence is observed, the decrease of Eu²⁺ fluorescence is attributed to an agglomeration of Eu²⁺ leading to luminescence quenching. The correlated diffusivity of Eu²⁺ ions is ascribed to the presence of aggregated F-centres such as M_Eu-centres observed by means of absorption spectroscopy.     

Eu red long afterglow in Y2O2S:Ti, Eu phosphor through afterglow energy transfer

Eu,Ti co-doped Y₂O₂S:0.03Ti,0.03Eu phosphors and single Eu or Ti doped Y₂O₂S phosphors were prepared and their luminescent properties were investigated in detail by photoluminescence (PL) spectra, long afterglow spectra and thermoluminescence spectra measurements. The results showed that Y₂O₂S:Ti,Eu phosphors possess orange-red afterglow color with afterglow time above 5 h. The reddish afterglow color, which corresponds to a set of linear Eu³⁺ emissions at low-energy range (540-630 nm), was demonstrated to come from the energy transfer process from yellow Ti afterglow emissions, the proposed energy transfer mechanism may well explain the Eu³⁺ afterglow emission.     

Emission analysis of Eu:MgLaLiSi2O7 powder phosphor

Newly synthesized reference MgLaLiSi₂O₇ and red luminescent Eu³⁺:MgLaLiSi₂O₇ powder phosphors have been successfully developed by a solid-state reaction method to analyze their emission and structural properties from the measurement of their XRD, SEM, FTIR and PL spectra. Emission spectra of Eu³⁺ powder phosphors have shown strong red emissions at 613 nm (⁵D₀→⁷F₂). These phosphors have also shown bright red emissions under a UV source. Based on the red emission performance, the Eu³⁺ concentration has been optimized to be at 0.3 mol%.     

Sol-gel method and luminescence properties of the ZrO<Subscript>2</Subscript>:Eu<Superscript>3+</Superscript> phosphors with different charge compensation

Eu³⁺-doped ZrO₂ phosphors with different charge compensators (Li⁺, Na⁺, K⁺) were prepared by the sol-gel method. The properties of the as-obtained samples are characterized by X-ray diffraction, scanning electron microscope, photoluminescence spectra, and decay curve. The results show that ZrO₂:Eu³⁺ phosphors with different charge compensation are mixed phase of tetragonal and monoclinic phase, and the volume fraction of tetragonal phase of ZrO₂:Eu³⁺/Na⁺ phosphor is bigger than the other phosphors. The phosphors can emit strong red light at 606~616 nm (⁵D₀ → ⁷F₂) excited by ultraviolet light (395 nm). Compared with two charge compensation patterns in the ZrO₂:Eu³⁺, it has been found that ZrO₂:Eu³⁺ phosphors used Na⁺ as charge compensator show greatly enhanced red emission under 395 nm excitation and longer luminescence lifetime.     

Synthesis and luminescence properties of YVO4:Eu,Bi phosphor with enhanced photoluminescence by Bi doping

YVO₄:Eu³⁺,Bi³⁺ phosphors have been prepared by the high-temperature solid-state (HT) method and the Pechini-type sol-gel (SG) method. Spherical SiO₂ particles have been further coated with YVO₄:Eu³⁺,Bi³⁺ phosphor layers by the Pechini-type SG process, and it leads to the formation of core-shell structured SiO₂/YVO₄:Eu³⁺,Bi³⁺ phosphors. Therefore, the phase formations, structures, morphologies, and photoluminescence properties of the three types of as-prepared YVO₄:Eu³⁺,Bi³⁺ phosphors were studied in detail. The average diameters for the phosphor particles are 2-4 μm for HT method, 0.1-0.4 μm for SG method, and 0.5 μm for core-shell structured SiO₂/YVO₄:Eu³⁺,Bi³⁺ particles, respectively. Photoluminescence spectra show that effective energy transfer takes place between Bi³⁺ and Eu³⁺ ions in each type of as-prepared YVO₄:Eu³⁺,Bi³⁺ phosphors. Introduction of Bi³⁺ into YVO₄:Eu³⁺ leads to the shift of excitation band to the long-wavelength region, thus the emission intensities of ⁵D₀-⁷F₂ electric dipole transition of Eu³⁺ at 615 nm upon 365 nm excitation increases sharply, which makes this phosphor a suitable red-emitting materials that can be pumped with near-UV light emitting diodes (LEDs).     

Temperature-dependent emission spectra of M2SiO4:Eu (M=Ca, Sr, Ba) phosphors for green and greenish white LEDs

The temperature dependence of emission spectra of alkaline earth ortho-silicates M₂SiO₄ (M=Ca, Sr, Ba) doped with Eu²⁺ ions is investigated. Two emission bands of Sr₂SiO₄:Eu²⁺ show the normal redshift with broadening bandwidth and decreasing emission intensity as an increase in temperature. On the other hand, emission bands of Ca₂SiO₄:Eu²⁺ and Ba₂SiO₄:Eu²⁺ show the anomalous blueshift with increasing temperature. For Ca₂SiO₄:Eu²⁺ and Ba₂SiO₄:Eu²⁺, the temperature dependence of the emission color can be described in terms of back tunneling from the excited state of low-energy emission band to the excited state of high-energy emission band in the configuration coordinate diagram. Our phosphors have a promising potential as phosphors for green or greenish white-light-emitting diode pumped by ultraviolet chip.     

Synthesis and luminescence properties of needle-like SrAl2O4:Eu, Dy phosphor via a hydrothermal co-precipitation method

Needle-like SrAl₂O₄:Eu²⁺, Dy³⁺ phosphors had been prepared by calcining the precursors obtained from hydrothermal process at the temperature of 1100 °C in a weak reductive atmosphere of active carbon. The crystal structure, morphology and optical properties of the composites were characterized. X-ray diffraction (XRD) patterns illustrated that the single-phase SrAl₂O₄ was formed at 1100 °C, which is much lower than that prepared by the traditional method. The transmission electron microscope (TEM) observation revealed the precursors and the resulted SrAl₂O₄:Eu²⁺, Dy³⁺ phosphors had well-dispersed distribution and needle-like morphology with an average diameter about 150 nm at the center and the length up to 1 μm. After irradiation by ultraviolet radiation with 350 nm for 5 min, the phosphors emit green color long-lasting phosphorescence corresponding to the typical emission of Eu²⁺ ion, both the PL spectra and luminance decay revealed that the phosphors had efficient luminescent and long lasting properties.     

Sol-gel synthesis and photoluminescence of CaSiO3:Eu nanophosphors using novel silicate sources

In this paper, seven kinds of silane coupling reagents were employed as silicate sources to prepare CaSiO₃:Eu³⁺ phosphors by the sol-gel method. The different silicate precursors were used to adjust the microstructure and size of the resulting phosphors. The crystallite size of phosphors is in the range of 30-35 nm and some of them show regular microstructure after high-temperature thermolysis. The photoluminescence properties show that all of them exhibit the characteristic fluorescence ⁵D₀→⁷F_J (J=0, 1, 2, 3, 4) of the Eu³⁺ ion and the strongest one is the red emission at 610 nm. Furthermore, the emission quantum efficiency (η) of the ⁵D₀ Eu³⁺ excited state has been calculated to be around 33% from the emission spectrum and the lifetime of the Eu³⁺ first excited level (τ, ⁵D₀).     

Eu3+ emission in SrAl2B2O7 based phosphors

Eu³⁺ doped SrAl₂B₂O₇ phosphors were fabricated by the wet method. The structures of the phosphors were characterized by XRD. The doping content of Eu³⁺ ions in SrAl₂B₂O₇:Eu³⁺ phosphors are 1%, 4%, 6%, 8%, 10% (molar fraction), respectively. Luminescence properties were analyzed by measuring the excitation and photoluminescence spectra. The luminescent properties of SrAl₂B₂O₇:Eu³⁺ phosphors are discussed. It is shown that from 4% to 6% of doping content of Eu³⁺ ions under 392 nm excitation in SrAl₂B₂O₇:Eu³⁺ phosphors is optimum.     

Novel green-emitting Na2CaPO4F:Eu phosphors for near-ultraviolet white light-emitting diodes

In this study, green-emitting Na₂CaPO₄F:Eu²⁺ phosphors were synthesized by solid-state reactions. The excitation spectra of the phosphors showed a broad hump between 250 and 450 nm; the spectra match well with the near-ultraviolet (NUV) emission spectra of light-emitting diodes (LEDs). The emission spectrum showed an intense broad emission band centered at 506 nm. White LEDs were fabricated by integrating a 390 nm NUV chip comprising blue-emitting BaMgAl₁₀O₁₇:Eu²⁺, green-emitting Na₂CaPO₄F:0.02 Eu²⁺, and red-emitting CaAlSiN₃:Eu²⁺ phosphors into a single package; the white LEDs exhibited white light with a correlated color temperature of 5540 K, a color-rendering index of 90.75, and color coordinates (0.332, 0.365) close to those of ideal white light.     

Photoluminescence and phosphorescence properties of MAl2O4:Eu, Dy (M=Ca, Ba, Sr) phosphors prepared at an initiating combustion temperature of 500 °C

Eu²⁺ and Dy³⁺ co-doped calcium aluminate, barium aluminate and strontium aluminate phosphors were synthesized at an initiating combustion temperature of 500 °C using urea as an organic fuel. The crystallinity of the phosphors was investigated by using X-ray diffraction (XRD) and the morphology was determined by a scanning electron microscope (SEM). The low temperature monoclinic structure for both CaAl₂O₄ and SrAl₂O₄ and the hexagonal structure of BaAl₂O₄ were observed. The effect of the host materials on the photoluminescence (PL) and phosphorescence properties were investigated by using a He-Cd Laser and a Cary Eclipse fluorescence spectrophotometer, respectively. The broad band emission spectra observed at 449 nm for CaAl₂O₄:Eu²⁺, Dy³⁺, 450 nm (with a shoulder-peak at 500 nm) for BaAl₂O₄:Eu²⁺, Dy³⁺ and 528 nm for SrAl₂O₄:Eu²⁺, Dy³⁺ are attributed to the 4f⁶5d¹ to 4f⁷ transition in the Eu²⁺ ion in the different hosts.     

Influence of Ba-doping on structural and luminescence properties of Sr2SiO4:Eu phosphors

Ba²⁺-doped Sr₂SiO₄:Eu²⁺ phosphors were synthesized with the high-temperature solid-state reaction technique. The experimental results, summarized in the successful production of a single-phase powder with fine microstructure of spherical particles with smooth surface, suggest that Ba²⁺-doping favors the stabilization of α′-Sr₂SiO₄. Rietveld refinement of X-ray diffractograms suggests that Ba²⁺ and Eu²⁺ ions occupy the sites of Sr²⁺ in the lattice of α′-Sr₂SiO₄. The produced phosphors show two intense emission bands at green and yellow regions of spectrum, originated from Eu²⁺ ions accommodated at two different sites in the host crystal, whose peaks depend on the concentrations of Ba²⁺ and Eu²⁺. Intense and broad excitation spectra extend from ultraviolet to the blue region.     

Sr2CeO4:Eu and Sr2CeO4:5 mol% Eu, 3 mol% Dy microphosphors: Wet chemistry synthesis from hybrid precursor and photoluminescence properties

In this article, Sr₂CeO₄:x mol% Eu³⁺ and Sr₂CeO₄:5 mol%Eu³⁺, 3 mol% Dy³⁺ phosphors were synthesized from assembling hybrid precursors by wet chemical method. As-prepared samples present uniform grain-like morphology and the particle size is about 0.2 μm. The luminescence spectra of Sr₂CeO₄:x mol% Eu³⁺ have been measured to examine the influence of the intensity of red emission lines for Eu³⁺ on the concentration of Eu³⁺, showing that the intensity of the red emission increases with an increase of the concentration from 1 to 5 mol%. Additionally, from the emission spectra of Sr₂CeO₄:5 mol%Eu³⁺, 3 mol% Dy³⁺ phosphors, the characteristic lines of Dy³⁺ have also been observed. This result indicates that there also exists an energy transfer process between Sr₂CeO₄ and Dy³⁺.