Thermoluminescence and absorption spectra of CdSe quantum dot-doped glass irradiated by X-rays

Thermally stimulated luminescence (TSL) of aluminoborosilicate glass doped with CdSe nanoparticles (28 and 47 Å) has been studied after exposure to ionizing radiation; the intense TSL peaks were observed at temperatures 150 and 85 °C, respectively. The optical absorption spectra, as well as TSL of the irradiated samples containing CuBr nanoparticles (44 Å) were also measured. In the case of CuBr, TSL was observed neither before nor after irradiation. The dependence of TSL intensity on irradiation time indicates that glass activated by CdSe nanoparticles shows promise as a dosimetric material.     

High work function of Al-doped zinc-oxide thin films as transparent conductive anodes in organic light-emitting devices

Deposition of Al-doped ZnO (AZO) films with various film thicknesses on glass substrates was performed to investigate the feasibility of using AZO films as anode electrodes in organic light-emitting devices (OLEDs). The electrical resistivity of the AZO films with a 180-nm thickness was 4.085 × 10⁻² Ω cm, and the average optical transmittance in the visible range was 80.2%. The surface work function for the AZO films, determined from the secondary electron emission coefficients obtained with a focused ion beam, was as high as 4.62 eV. These results indicate that AZO films grown on glass substrates hold promise for potential applications as anode electrodes in high-efficiency OLEDs.     

Effect of thickness on the structure, morphology and optical properties of sputter deposited Nb2O5 films

Nb₂O₅ films with the thickness (d) ranging from 55 to 2900 nm were deposited on BK-7 substrates at room temperature by a low frequency reactive magnetron sputtering system. The structure, morphology and optical properties of the films were investigated by X-ray diffraction, atomic force microscopy and spectrophotometer, respectively. The experimental results indicated that the thickness affects drastically the structure, morphology and optical properties of the film. There exists a critical thickness of the film, d_cri =2010 nm. The structure of the film remains amorphous as d < d_cri. However, it becomes crystallized as d > d_cri. The root mean square of surface roughness increases with increasing thickness as d > 1080 nm. Widths and depths of the holes on film surface increase monotonously with increasing thickness, and widths of the holes are larger than 1000 nm for the crystalline films. Refractive index increases with increasing thickness as d < d_cri, while it decreases with increasing thickness as d > d_cri. In addition, the extinction coefficient increases with increasing thickness as d > d_cri.     

Pulsed Nd:YAG laser depositions of ITO and DLC films for OLED applications

Indium-tin oxide (ITO) films deposited on heated and non-heated glass substrates by a pulsed Nd:YAG laser at 355 nm and ∼2.5 J/cm² were used in the fabrication of simple organic light-emitting diodes (OLEDs), ITO/(PVK + Alq₃ + TPD)/Al. The ITO was deposited on heated glass substrates which possessed resistivity as low as ∼3 × 10⁻⁴ Ω cm, optical transmission as high as ∼92% and carrier concentration of about ∼5 × 10²⁰ cm⁻³, were comparable to the commercial ITO. Substrate heating transformed the ITO microstructure from amorphous to polycrystalline, as revealed by the XRD spectrum. While the polycrystalline ITO produced higher OLED brightness, it was still lower than that on the commercial ITO due to surface roughness. A DLC layer of ∼1.5 nm deposited on this ITO at laser fluence of >12.5 J/cm² improved its device brightness by suppressing the surface roughness effect.     

Annealing induced microstructural evolution of electrodeposited electrochromic tungsten oxide films

A significant influence of microstructure on the electrochromic and electrochemical performance characteristics of tungsten oxide (WO₃) films potentiostatically electrodeposited from a peroxopolytungstic acid (PPTA) sol has been evaluated as a function of annealing temperature. Powerful probes like X-ray diffractometry (XRD), transmission electron microscopy (TEM), UV-vis spectrophotometry, multiple step chronoamperometry and cyclic voltammetry have been employed for the thin film characterization. The as-deposited and the film annealed at 60 °C are composed of nanosized grains with a dominant amorphous phase, as well as open structure which ensues from a nanoporous matrix. This ensures a greater number of electroactive sites and a higher reaction area thereby manifesting in electrochromic responses superior to that of the films annealed at higher temperatures. The films annealed at temperatures ≥250 °C are characterized by a prominent triclinic crystalline structure and a hexagonal phase co-exists at temperatures ≥400 °C. The deleterious effect on the electrochromic properties of the film with annealing is ascribed to the loss of porosity, densification and the increasing crystallinity and grain size. Amongst all films under investigation, the film annealed at 60 °C exhibits a high transmission modulation (ΔT ∼ 68%) and coloration efficiency (η ∼ 77.6 cm² C⁻¹) at λ = 632.8 nm, charge storage capacity (Q_ins ∼ 21 mC cm⁻²), diffusion coefficient (6.08 × 10⁻¹⁰ cm² s⁻¹), fast color-bleach kinetics (t_c ∼ 275 s and t_b ∼ 12.5 s) and good electrochemical activity, as well as reversibility for the lithium insertion-extraction process upon cycling. The remarkable potential, which the film annealed at 60 °C has, for practical “smart window” applications has been demonstrated.     

High repetition rate Q-switched microchip Nd:YVO4 laser with pulse duration as short as 1.1 ns

We have demonstrated a compact and an efficient passively Q-switched microchip Nd:YVO₄ laser by using a composite semiconductor absorber as well as an output coupler. The composite semiconductor absorber was composed of an LT (low-temperature grown) In_0.25Ga_0.75As absorber and a pure GaAs absorber. To our knowledge, it was the first demonstration of the special absorber for Q-switching operation of microchip lasers. Laser pulses with durations of 1.1 ns were generated with a 350 μm thick laser crystal and the repetition rate of the pulses was as high as 4.6 MHz. The average output power was 120 mW at the pump power of 700 mW. Pulse duration can be varied from 1.1 to 15.7 ns by changing the cavity length from 0.45 to 5 mm. Pulses with duration of 1.67 and 2.41 ns were also obtained with a 0.7 mm thick laser crystal and a 1 mm thick laser crystal, respectively.     

Preparation of transparent conductive TiO2:Nb thin films by pulsed laser deposition

This study investigated the optical and electrical properties of Nb-doped TiO₂ thin films prepared by pulsed laser deposition (PLD). The PLD conditions were optimized to fabricate Nb-doped TiO₂ thin films with an improved electrical conductivity and crystalline structure. XRD analyses revealed that the deposition at room temperature in 0.92 Pa O₂ was suitable to produce anatase-type TiO₂. A Nb-doped TiO₂ thin film attained a resistivity as low as 6.7 × 10⁻⁴ Ω cm after annealing at 350 °C in vacuum (<10⁻⁵ Pa), thereby maintaining the transmittance as high as 60% in the UV-vis region.     

Influence of poly acrylic acid on the dispersion of calcite nano-particles

Dispersive calcite (CaCO₃) nano-particles with a primary particle size of about 100 nm and an average agglomerate size of about 2.8 μm were synthesized via carbonation in the presence of poly acrylic acid (PAA). The experimental results showed that PAA was liable to be adsorbed on the calcite surface, leading to the decrease of the agglomeration size from 8.7 μm to 2.8 μm and the zeta potential from −8.5 mV to −28.6 mV. The deformation and adsorption behaviors of PAA on the typical planes of calcite were studied by the molecular simulation method, using DISCOVER model and the COMPASS force field. The simulation results indicated that PAA was easy to be deformed and adsorbed on the calcite planes owing to mainly the coulomb interaction as well as the possible formation of CaO and hydrogen bonds between PAA and calcite. The adsorption tendency of PAA on the CaCO₃ planes was as follows based on the values of the corresponding interaction energies: (2 0 2) > (1 1 6) > (1 1 3) > (0 1 8) > (1 1 0) > (1 0 4).     

An electrostatic force microscope study of Si nanostructures on Si(1 0 0) as a function of post-annealing temperature and time

The evolution of Si nanostructures induced by Ar⁺ ion sputtering on Si(1 0 0) was studied with electrostatic force microscopy (EFM) as a function of post-annealing temperature (T = room temperature-800 °C) and time (t = 0-160 min). The post-annealing of the nanostructure was conducted in vacuum. It was found that with T increasing, the EFM contrast degraded steadily and became nearly undetectable at T = 800 °C; with t increasing at T = 800 °C, the EFM contrast fell down steadily as well. However, the surface morphology and roughness were much less affected after annealing. The results suggest that the as-formed Si nanostructures may not be epitaxially grown on Si(1 0 0) substrate as claimed before. A plane capacitance model supported this conclusion.     

Phantom Friedmann cosmologies and higher-order characteristics of expansion

We discuss a more general class of phantom (p < −?) cosmologies with various forms of both phantom (w < −1), and standard (w > −1) matter. We show that many types of evolution which include both Big-Bang and Big-Rip singularities are admitted and give explicit examples. Among some interesting models, there exist non-singular oscillating (or “bounce”) cosmologies, which appear due to a competition between positive and negative pressure of variety of matter content. From the point of view of the current observations the most interesting cosmologies are the ones which start with a Big-Bang and terminate at a Big-Rip. A related consequence of having a possibility of two types of singularities is that there exists an unstable static universe approached by the two asymptotic models—one of them reaches Big-Bang, and another reaches Big-Rip. We also give explicit relations between density parameters Ω and the dynamical characteristics for these generalized phantom models, including higher-order observational characteristics such as jerk and “kerk.” Finally, we discuss the observational quantities such as luminosity distance, angular diameter, and source counts, both in series expansion and explicitly, for phantom models. Our series expansion formulas for the luminosity distance and the apparent magnitude go as far as to the fourth-order in redshift z term, which includes explicitly not only the jerk, but also the “kerk” (or “snap”) which may serve as an indicator of the curvature of the universe.     

Microstructure of epitaxial SrRuO3 thin films on MgO substrates

SrRuO₃ thin films have been grown on singular (1 0 0) MgO substrates using pulsed laser deposition (PLD) in 30 Pa oxygen ambient and at a temperature of 400-700 °C. Ex situ reflection high-energy electron diffraction (RHEED) as well as X-ray diffraction (XRD) θ/2θ scan indicated that the films deposited above 650 °C were well crystallized though they had a rough surface as shown by atom force microscopy (AFM). XRD Φ scans revealed that these films were composed of all three different types of orientation domains, which was further confirmed by the RHEED patterns. The heteroepitaxial relationship between SrRuO₃ and MgO was found to be [1 1 0] SRO//[1 0 0] MgO and 45°-rotated cube-on-cube [0 0 1] SRO//[1 0 0] MgO. These domain structures and surface morphology are similar to that of ever-reported SrRuO₃ thin films deposited on the (0 0 1) LaAlO₃ substrates, and different from those deposited on (0 0 1) SrTiO₃ substrates that have an atomically flat surface and are composed of only the [1 1 0]-type domains. The reason for this difference was ascribed to the effect of lattice mismatch across the film/substrate interface. The room temperature resistivity of SrRuO₃ films fabricated at 700 °C was 300 μΩ cm. Therefore, epitaxial SrRuO₃ films on MgO substrate could serve as a promising candidate of electrode materials for the fabrication of ferroelectric or dielectric films.     

Synthesis of GaN phase by ion implantation

GaN phase is synthesized using systemic implantation of nitrogen ions of multiple energies (290, 130 and 50 keV) into Zn-doped GaAs (1 0 0) at room temperature and subsequent annealing at 850 °C for 30 min in Ar + H₂ atmosphere. The implanted doses of nitrogen ions are 5 × 10¹⁶ and 1 × 10¹⁷ ions-cm⁻². Glancing angle X-ray diffraction studies show that hexagonal phase of GaN were formed. The photoluminescence studies show the emission from the band edge as well as from point defects.     

Self-Q-switched and mode-locked 946 nm Cr,Nd:YAG laser

A simultaneous self-Q-switched and mode-locked diode-pumped 946 nm laser by using a Cr,Nd:YAG crystal as gain medium as well as saturable absorber is demonstrated for the first time as we know. The maximum average output power of 751 mW with a slope efficiency of 18.38% is obtained at an intra-cavity average peak power intensity of 4.83 × 10⁶ W/cm². Under this circumstance, the repetition rate of Q-switched envelopes is 9.63 kHz and the pulse width is about 460 ns. Almost 100% mode-locked modulation depth is obtained at all time in the experiment process whether the incident pump power is low or high. The repetition rate of mode-locked pulses within a Q-switched envelope is 135.13 MHz and the mode-locked pulse width is within 600 ps. The laser produces high-quality pulses in TEM₀₀-mode in the simultaneous self-Q-switched and mode-locked experiment.     

Epitaxial growth of Sc-doped ZnO films on Si by sol-gel route

The epitaxial growth of doped ZnO films is of great technological importance. Present paper reports a detailed investigation of Sc-doped ZnO films grown on (1 0 0) silicon p-type substrates. The films were deposited by sol-gel technique using zinc acetate dihydrate as precursor, 2-methoxyethanol as solvent and monoethanolamine (MEA) as a stabilizer. Scandium was introduced as dopant in the solution by taking 0.5 wt%¹ of scandium nitrate hexahydrate. The effect of annealing on structural and photoluminescence properties of nano-textured Sc-doped films was investigated in the temperature range of 300-550 °C. Structural investigations were carried out using X-ray diffraction, scanning electron microscopy and atomic force microscopy. X-ray diffraction study revealed that highly c-axis oriented films with full-width half maximum of 0.21° are obtained at an annealing temperature of 400 °C. The SEM images of ZnO:Sc films have revealed that coalescence of ZnO grains occurs due to annealing. Ostwald ripening was found to be the dominant mass transport mechanism in the coalescence process. A surface roughness of 4.7 nm and packing density of 0.93 were observed for the films annealed at 400 °C. Room temperature photoluminescence (PL) measurements of ZnO:Sc films annealed at 400 °C showed ultraviolet peak at about (382 nm) with FWHM of 141 meV, which are comparable to those found in high-quality ZnO films. The films annealed below or above 400 °C exhibited green emission as well. The presence of green emission has been correlated with the structural changes due to annealing. Reflection high energy electron diffraction pattern confirmed the nearly epitaxial growth of the films.     

Some studies about the green and red light emitting structures in NaCl1−xBrx:Mn

In this work we present the results obtained from the luminescence spectra and X-ray diffraction as well as transmission electron microscopy, at room temperature on crystals of NaCl_1−xNaBr_x:MnCl₂:0.3% (x=0.00, 0.05, 0.25, and 0.50). The results suggest the existence of structures between the crystal planes (1 1 1) and (2 0 0), which may be associated with different types of Mn²⁺ arrangements, such as dipole complexes, octahedral and rhombohedral structures as well as other possible nanostructures that include mixtures of bromine/chlorine ions. These are responsible for the emission spectra of “as grown” crystals consisting of maxima around 500 nm and 600 nm. The green emission has been usually attributed to rhombohedral/tetrahedral symmetry sites; the present results point out that this is due to Mn–Cl/Br nanostructures with rhombohedral structure. On the other hand when the crystals are thermally quenched from 500 °C to room temperature the structures previously detected present changes. Only a red band appears around 620 nm if the samples are later annealed at 80 °C.     

Algebraic treatments of the problems of the spin-1/2 particles in the one- and two-dimensional geometry: A systematic study

We consider solutions of the 2 × 2 matrix Hamiltonians of the physical systems within the context of the su (2) and su (1, 1) Lie algebras. Our technique is relatively simple when compared with those of others and treats those Hamiltonians which can be treated in a unified framework of the Sp (4, R) algebra. The systematic study presented here reproduces a number of earlier results in a natural way as well as leads to a novel finding. Possible generalizations of the method are also suggested.     

InSb quantum dots and quantum rings on InAs-rich surface

We report a study of InSb nanoobjects (quantum dots and quantum rings) grown on InAs-rich surface by liquid phase epitaxy. Characterization of the sample surface was performed using atomic force microscopy (AFM). The bimodal formation of the uncapped InSb quantum dots (QDs) was observed for the growing on a binary InAs substrate. Uniform high-density (1 × 10¹⁰ cm⁻²) quantum dots with a height of 3 nm were obtained at T = 420-430 °C, whereas low-density (5 × 10⁸ cm⁻²) big quantum dots were 9 nm in height. As a buffer layer, lattice-matched InAsSb_0.12P_0.25 solid solution was deposed on InAs substrate using metal-organic vapour phase epitaxy. Deposition from the InSb melt on the buffer layer resulted in the formation of InSb nanoobjects with density as high as 3 × 10¹⁰ cm⁻².     

Passive Q-switching of short-length Tm-doped silica fiber lasers by polycrystalline Cr:ZnSe microchips

We demonstrate passive Q-switching of short-length double-clad Tm³⁺-doped silica fiber lasers near 2 μm pumped by a laser diode array (LDA) at 790 nm. Polycrystalline Cr²⁺:ZnSe microchips with thickness from 0.3 to 1 mm are adopted as the Q-switching elements. Pulse duration of 120 ns, pulse energy over 14 μJ and repetition rate of 53 kHz are obtained from a 5-cm long fiber laser. As high as 530 kHz repetition rate is achieved from a 50-cm long fiber laser at ∼10-W pump power. The performance of the Q-switched fiber lasers as a function of fiber length is also analyzed.     

Determination of the positron diffusion length in Kapton by analysing the positronium emission

Doppler profile spectroscopy and Compton-to-peak ratio analysis have been used to study the positronium (Ps) emission from the Kapton surface as a function of the positron implantation energy E.Two different positions for the sample have been performed in the experiment.In the first case the sample and the Ge-detector are perpendicular to the positron beam. With this geometry the emission of para-positronium (p-Ps) is detected as a narrow central peak.In the second case, by rotating the sample 45° with respect to the beam axis, the emission of p-Ps is detected as a blue-shifted fly away peak. The implantation of the positrons is described by the Makhov profile, where we used the modified median implantation for polymers as given by Algers et al. [J. Algers, P. Sperr, W. Egger, G. Kögel, F.H.J. Maurer, Phys. Rev. B 67 (2003) 125404].Thermalised positrons can diffuse to the surface and may pick up an electron to be emitted as Ps. We found a thermal and or epithermal positron diffusion length L₊ = 5.43 ± 0.71 nm and L₊ = 5.51 ± 0.28 nm correspondingly for both cases, which is much more than the one found by Brusa et al. [R.S. Brusa, A. Dupasquier, E. Galvanetto, A. Zecca, Appl. Phys. A 54 (1992) 233]. The respective efficiency for the emission of Ps by picking up an electron from the surface is found to be f_pu = 0.247 ± 0.012 and f_pu = 0.156 ± 0.003.     

Effect of uniaxial strain on adatom diffusion across {1 1 1}-faceted step

Diffusion of Pt adatom across the strained {1 1 1}-faceted step is studied by embedded atom method along with nudged elastic band method. For adatom on the flat (1 1 1) surface, the anisotropic diffusion behavior is found as the uniaxial strain is imposed. For the strained {1 1 1}-faceted step, our results show that the maximum energy barrier for adatom crossing step edge remains approximately constant as the strain varied from −1.0% to 1.0%, and there is a rise as the larger uniaxial strain is applied. The calculated energy barrier for adatom diffusion along the step edge increases with increasing tensile strain, and the slope of the straight line is small.