Luminescent properties of PEG-added nanocrystalline YVO4:Eu phosphor prepared by a hydrothermal method

In an effort to obtain enhanced luminescence under photoexcitation as well as to clarify the underlying correlation between non-radiative sites and a surface modifier in a nanoscale phosphor, YVO₄:Eu³⁺ was synthesized via a polyethylene glycol (PEG)-assisted hydrothermal process. The temperature variable photoluminescence reveals that the overall emission behaviors of PEG-added YVO₄:Eu³⁺ phosphor was similar to those of a post-annealed sample without PEG addition. This polymeric agent induces a rough thin layer onto the YVO₄:Eu³⁺ nanoparticle during synthetic procedure, resulting in the prevention of surface-adsorbed species known as non-radiative sites such as NH₄⁺ as well as hydroxyl groups.     

NaEu0.96Sm0.04(MoO4)2 as a promising red-emitting phosphor for LED solid-state lighting prepared by the Pechini process

NaEu_0.96Sm_0.04(MoO₄)₂ was prepared by the Pechini method (P phosphor) and as a comparison, also by solid-state reaction technique (S phosphor). The photo-luminescent properties, the morphology and the grain size were investigated. The phosphors show broadened excitation band around 400 nm, high intensity of Eu³⁺⁵D₀→⁷F₂ emission upon excitation around 400 nm, and appropriate CIE chromaticity coordinates. Intensive red light-emitting diodes (LEDs) were fabricated by combining the phosphor and a 400 nm InGaN chip for the first time, which confirm that the phosphor is a good candidate for near UV LED. The luminescent intensity of P phosphor prepared at 700 °C is near that of S phosphor prepared at 800 °C. In addition, P phosphor shows advantages of lower calcining temperature, shorter heating time, and smaller grain size. Considering all these factors, the suitable method for preparing the promising near UV LED phosphor NaEu_0.96Sm_0.04(MoO₄)₂ is recommended to be the Pechini process at 700 °C.     

Photoluminescence properties of nanocrystalline La2TeO6:Eu phosphor prepared by Pechini sol-gel method

La₂TeO₆:Eu³⁺ nanophosphors were prepared by Pechini sol-gel process, using lanthanide nitrates and telluric acid as precursor. X-ray diffraction (XRD), scanning electron microscopy (SEM), atomic force microscopy (AFM), thermogravimetric analysis (TG), photoluminescence spectra (PL) and fluorescence lifetime were used to characterize the resulting phosphors. The results of XRD indicate that all samples crystallized completely at 1023 K and are isostructural with the orthorhombic La₂TeO₆. SEM study reveals that the samples have a strong tendency to form agglomerates with an average size ranging from 50 to 80 nm. The photoluminescence intensity and chromaticity were improved for excitation at 254 and 395 nm. The optimized phosphor La_1.80Eu_0.10TeO₆ could be considered as an efficient red-emitting phosphor for solid-state lighting devices based on GaN LEDs.     

Photoluminescence of cubic and monoclinic Gd2O3:Eu phosphors prepared by flame spray pyrolysis

In this paper, europium-doped gadolinium phosphor, which is a potentially bifunctional material with both fluorescent and magnetic properties, has been prepared in a one-step procedure via flame spray pyrolysis, and its crystal structure, morphology, and PL intensity were investigated. All the prepared phosphors were submicron-sized with spherical shapes and either a pure cubic or pure monoclinic phase. In order to observe the effects of temperature on the crystal phases of the prepared phosphors, we applied a H₂ vs. N₂/O₂ diffusion flame, with the maximum flame temperature ranging from T_max=1375 to 2050 K. The temperature profiles under various flame conditions are also reported herein to further elucidate the rapid synthesis process. The PL intensity in the cubic phase improved linearly with increasing flame temperature until the transition to a monoclinic phase. The peak of the photoluminescence(PL) spectrum from the phosphors prepared at T_max=1733 K in the cubic phase was narrower and twice as strong as the peak of the PL spectrum from the phosphors prepared at T_max=2050 K in the monoclinic phase. This paper provides important data showing the relationship between the synthesis temperature and the phase transition in Gd₂O₃:Eu in the continuous one-step use of flame spray pyrolysis.     

Luminescent properties of a novel red-emitting phosphor: Eu-activated Ca3Sr3(VO4)4

A new luminescent material, Eu³⁺ activated Ca₃Sr₃(VO₄)₄, was investigated. This compound shows a strong red emission centered at 618 nm under near-UV light with two distinct absorption bands; charge transfer state of VO₄³⁻ and f-f transitions of europium ions. As the europium concentration is increased, an additional red-emitting phosphor, EuVO₄, which is known to be a prominent luminescent material in the near-UV region can be traced. The UV excited luminescent properties of this material may find application in the production of red phosphors for white light-emitting diodes.     

Enhanced luminescent properties of Y3Al5O12:Tb,Ce phosphor prepared by spray pyrolysis

Yttrium aluminum garnet (YAG) particles doped with Tb³⁺ or double doped with Tb³⁺ and Ce³⁺ were prepared by spray pyrolysis and characterized by photo- and cathode-luminescence. It was tried to incorporate a broad band of Ce³⁺ activator into the line peaks of Tb³⁺ in YAG host without the reduction of emission intensity. Ce-codoped YAG:Tb particles showed a broad band emission due to the d-f transition of Ce³⁺ and a reduction in the intensity of emission peaks due to ⁵D₃-⁷F_j (j=3, 4, 5, 6) transition of Tb³⁺ when they were excited by the ultraviolet light of 270 nm. These results supported that an effective energy transfer occurs from Tb³⁺ to Ce³⁺ in YAG host. Codoping Ce³⁺ ions greatly intensified the excitation peak at 270 nm for the emission at 540 nm of Tb³⁺, which means that more lattice defects, involving in the energy absorption and transfer to Tb³⁺, are formed by the Ce³⁺ codoping. The finding gives a promising approach for enhancing the luminescence efficiency.     

Continuous nano-coating of Y2O3:Eu phosphor shell on SiO2 core particles and its photoluminescence properties

In order to investigate the effects of the crystallite size on the photoluminescence (PL) properties of a phosphor, monodisperse spherical SiO₂/Y₂O₃:Eu³⁺ phosphor core/shell particles were synthesized. On the surface of the core particles prepared by the Stöber method, the phosphor shell was continuously coated by a heterogeneous precipitation method. Because the growth of the crystallite was restricted by the shell thickness, the crystallite size could be successfully controlled at the same firing conditions. The PL intensity, the asymmetric ratio and thus the color purity were significantly decreased with the decrease of the crystallite size. In addition, the position of charge transfer band in the PL excitation spectrum was red-shifted with the decrease of the crystallite size.     

Sensitized photoluminescent properties of manganese-activated magnesium gallate phosphor

The vaccum-ultra-violet (VUV)- and UV-excited luminescent properties of MgGa₂O₄:Mn²⁺ phosphor with various co-dopants were investigated. Spinel-structured manganese-activated magnesium gallate exhibited intense green emission with the spectrum centered at 503 nm under 147 and 254 nm excitation induced by the transition from the lowest excited state to the ground state, ⁴T₁-⁶A₁, of the tetrahedral-sited Mn²⁺. With optimized incorporation ranges, Eu³⁺, Ce³⁺ and Al³⁺ co-doping, enhanced the overall fluorescence efficiency under 147 nm and these could be tentatively interpreted in terms of optical properties of host compounds and co-doped ions.     

Hydrothermal preparation and photoluminescent properties of MgAl2O4: Eu spinel nanocrystals

Nanoplates of the MgAl₂O₄ spinel doped with Eu³⁺ ions were prepared by a microwave assisted hydrothermal method. Structural properties of the precursor calcined at 700 and 1000 ^oC powders were characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM). According to the obtained XRD patterns the formation of single-phase spinels after calcination was confirmed. The average spinel particle size was determined to be 11 nm after calcination at 700 °C and it increased up to 14 nm after calcination at 1000 °C. The photoluminescent properties of prepared powders with different Eu³⁺ ion concentrations (0-5% mol) were investigated using excitation and emission spectroscopy at room and low temperatures (77 K).     

An analysis of Y2O3:Eu thin films for thermographic phosphor applications

A comparative study of the luminescent properties of Y₂O₃:Eu³⁺ phosphor powders and thin films sputtered from targets prepared from combustion synthesized powders is reported. Thin films of (Y_0.96Eu_0.04)₂O₃ were deposited on silicon substrates. Films deposited at 600 °C had both monoclinic and cubic phases of Y₂O₃, which developed to an oriented cubic phase after annealing. Films and powders showed a linear dependence of the intensity of the ⁵D₇→⁷F₂ (611 nm) transition with temperature in the range 26-660 °C with an average rate of change of 1.8×10⁻⁴ °C⁻¹. The rate of change appears to be dependent on the Eu³⁺ concentration. This work shows that these thin films can be used as thermographic phosphors for remote temperature measurements.     

Correlated ESR, PL and TL studies on Sr5(PO4)3Cl:Eu thermoluminescence dosimetry phosphor

Electron spin resonance (ESR), thermoluminescence and photoluminescence studies in Eu²⁺ activated Sr₅(PO₄)₃Cl phosphor are reported in this paper. The Sr₅(PO₄)₃Cl:Eu²⁺ phosphor is twice as sensitive as the conventional CaSO₄:Dy phosphor used in thermoluminescence dosimetry of ionizing radiations. It has a linear response, simple glow curve, emission peaking at 456 nm. The defect centers formed in the Sr₅(PO₄)₃Cl:Eu²⁺phosphor are studied by using the technique of ESR. A dominant TL glow peak at 430 K with a smaller shoulder at 410 K is observed in the phosphor. ESR studies indicate the presence at three centers at room temperature. Step annealing measurements show a connection between one of the centers and the dominant glow peak at 430 K. The 430 K TL peak is well correlated with center I, which is tentatively identified as (PO₄)²⁻ radical.     

Synthesis and characterization of Eu doped SrY2O4 phosphor

The present paper reports that TL glow curve and kinetic parameter of Eu³⁺ doped SrY₂O₄ phosphor irradiated by beta source. Sample was prepared by solid state preparation method. Sample was characterized by XRD analysis and particle size was calculated by Debye–Scherrer formula. The sample was irradiated with Sr-90 beta source giving a dose of 10 Gy and the heating rate used for TL measurements are 6.7 °C/s. The samples display good TL peaks at 106 °C, 225 °C and 382 °C. The corresponding kinetic parameters are calculated. The photoluminescence excitation spectrum at 247 and 364 nm monitored with 400 nm excitation and the corresponding emission peaks at 590, 612 and 624 nm are reported.     

Preparation, structural and photoluminescent properties of CeO2:Eu films derived by Pechini sol-gel process

In this study, CeO₂ and CeO₂:Eu films were prepared by a simple Pechini sol-gel process and dip-coating method. CeO₂ were successfully synthesized by hydrolysis of cerium nitrate. Thermogravimetric analysis was used to study the thermal chemical properties of sol-gel powder. Structural properties of CeO₂ films annealed at different temperature ranging from 400 to 900 °C were investigated by X-ray diffraction, field emission scanning electron microscopy, and Fourier transform infrared spectroscopy. Luminescent properties of CeO₂:Eu³⁺ films were investigated by excitation and emission spectra. Our results show that CeO₂ is a good host material for rare earth ions doping and Pechini sol-gel process is a useful method to derive high quality, macrocrack free, pure and doped CeO₂ films.     

Synthesis and luminescence properties of YVO4:Eu,Bi phosphor with enhanced photoluminescence by Bi doping

YVO₄:Eu³⁺,Bi³⁺ phosphors have been prepared by the high-temperature solid-state (HT) method and the Pechini-type sol-gel (SG) method. Spherical SiO₂ particles have been further coated with YVO₄:Eu³⁺,Bi³⁺ phosphor layers by the Pechini-type SG process, and it leads to the formation of core-shell structured SiO₂/YVO₄:Eu³⁺,Bi³⁺ phosphors. Therefore, the phase formations, structures, morphologies, and photoluminescence properties of the three types of as-prepared YVO₄:Eu³⁺,Bi³⁺ phosphors were studied in detail. The average diameters for the phosphor particles are 2-4 μm for HT method, 0.1-0.4 μm for SG method, and 0.5 μm for core-shell structured SiO₂/YVO₄:Eu³⁺,Bi³⁺ particles, respectively. Photoluminescence spectra show that effective energy transfer takes place between Bi³⁺ and Eu³⁺ ions in each type of as-prepared YVO₄:Eu³⁺,Bi³⁺ phosphors. Introduction of Bi³⁺ into YVO₄:Eu³⁺ leads to the shift of excitation band to the long-wavelength region, thus the emission intensities of ⁵D₀-⁷F₂ electric dipole transition of Eu³⁺ at 615 nm upon 365 nm excitation increases sharply, which makes this phosphor a suitable red-emitting materials that can be pumped with near-UV light emitting diodes (LEDs).     

Orange emission enhancement by energy transfer in Sr3Al2O5Cl2:Ce, Eu phosphor for solid-state lighting

Orange-emissive Ce³⁺/Eu²⁺ co-doped Sr₃Al₂O₅Cl₂ phosphors were synthesized by a solid-state reaction. The large overlap between the emission spectrum of blue Sr₃Al₂O₅Cl₂:Ce³⁺ and the excitation spectrum of orange Sr₃Al₂O₅Cl₂:Eu²⁺, and the shortening trend in lifetime of Ce³⁺ donors with increasing Eu²⁺ concentration in Sr₃Al₂O₅Cl₂:Ce³⁺, Eu²⁺ provide the strong evidence of energy transfer from Ce³⁺ to Eu²⁺ ions. It supports that the orange emission intensity of the optimal co-doped phosphor is 1.5 times stronger than that of single Eu²⁺-doped one. The Sr₃Al₂O₅Cl₂:Ce³⁺, Eu²⁺ phosphor is a promising orange-emitting phosphor for warm-white-light-emitting diode because of its effective excitation in the near ultraviolet range.     

Synthesis and optical properties of Er and Eu doped SrAl2O4 phosphor ceramic

We report, for the first time on luminescence from a Er³⁺ doped SrAl₂O₄ phosphor. Effects of Eu³⁺ doping were also studied. The influence of rare-earth doping in crystal structure and its optical properties were analysed by means of X-ray diffraction (XRD), Raman scattering, optical absorption, excitation and emission (PL) spectroscopy, thermally stimulated luminescence (TSL) and scanning electron microscope (SEM). Luminescence spectra and luminescence decay curves for Er³⁺ transitions in the near infrared region were recorded. The PL maximum for Eu doped SrAl₂O₄ is obtained at 620 nm and corresponds to the orange region of the spectrum. Diffraction patterns reveal a dominant phase, characteristic of the monoclinic SrAl₂O₄ compound and the presence of dopants has no effect on the basic crystal structure of SrAl₂O₄. The shapes of the glow curves are different for each dopant irradiated with either a ⁹⁰Sr-⁹⁰Y beta source, or UV light at 311 nm, and in detail the TL signals differ somewhat between Er and Eu dopants.     

Synthesis and properties of solution-processed Eu:BaY2F8

The structural and optical properties of solution-processed Eu³⁺:BaY₂F₈ were characterized and compared to those of the sample synthesized by a solid-state reaction method. Precipitated from solution Eu³⁺:BaY₂F₈ has the fluorite (CaF₂) type of structure, which transforms completely into monoclinic form when powder is heated at 750 °C. This temperature is also sufficient for entire elimination of hydroxyl groups. The intensities of f-f emission transitions of Eu³⁺ in BaY₂F₈ were analyzed in the frame of Judd-Ofelt model and the values of 1.23×10⁻²⁰ and 1.95×10⁻²⁰ cm² were determined for Ω₂ and Ω₄ intensity parameters. The experimental lifetimes of the ⁵D₀ and ⁵D₁ levels are equal to 8.4 and 2.3 ms, respectively. The quantum efficiency of Eu³⁺ in BaY₂F₈ was evaluated to be ∼35%.     

Synthesis and optical properties of red emitting Eu doped CaZrO3 phosphor

Eu³⁺ activated Ca_1−xEu_xZrO₃ (x = 0.01–0.05) phosphor with perovskite structure has been synthesized by sol–gel combustion method. The structure, morphology and optical properties of materials were characterized by X-ray diffraction, scanning electron microscopy and fluorescence spectrometry. The XRD results indicate that crystals of CaZrO₃:Eu³⁺ belongs to orthorhombic perovskite structure. The phosphors can be effectively excited by UV light and the emission spectra results indicate that red luminescence of CaZrO₃:Eu³⁺ due to electric dipole transition ⁵D₀ → ⁷F₂ at 616 nm is dominant. Thus, these prepared phosphors show remarkable luminescent properties which find applications in display devices.     

A potential green-emitting phosphor Ca8Mg(SiO4)4Cl2:Eu for white light emitting diodes prepared by sol-gel method

A potential green emitting phosphor Ca₈Mg(SiO₄)₄Cl₂:Eu²⁺ was prepared by modified sol-gel method. The factors those affect the photoluminescence intensity including heating temperature, the usage of the chlorine source CaCl₂ and the concentration of dopant Eu²⁺ were also investigated in detail. As comparison, the phosphor prepared by solid-state reaction was also prepared. The phosphors show intense absorption in the range of 375-450 nm, which makes it a potential candidate of green emitting phosphor used for near-UV or blue light excited white LEDs.     

Dyand Mn emission in KMgSO4Cl phosphor

In the present paper, KMgSO₄Cl:Ce³⁺, KMgSO₄Cl:Ce³⁺,Dy³⁺, and KMgSO₄Cl:Ce³⁺,Mn²⁺, new halosulphate phosphors were synthesized by wet chemical method. X-ray powder diffraction (XRD) and photoluminescence (PL) characterization of phosphors have been reported in this paper. The effects of Dy³⁺ co-doping on the PL characteristics of KMgSO₄Cl:Ce phosphor were studied. Energy transfer from Ce³⁺→Dy³⁺and Ce³⁺→Mn²⁺ results in increase in PL peak intensity suggesting that Ce³⁺ plays an important role in PL emission in the present matrix. The PL emission spectra have two peaks (482 and 571 nm) and a single peak (564 nm), which could be attributed to the Ce³⁺→Dy³⁺and Ce³⁺→Mn²⁺ emissions, respectively.