Investigation on Eu doped Sr2MgSi2O7 red-emitting phosphors for white-light-emitting diodes

In this work, we report the high temperature solid-state synthesis of red phosphors Sr₂MgSi₂O₇: Eu³⁺ with various Eu³⁺ concentrations. Their luminescent properties at room temperature are investigated. The X-ray diffraction patterns indicate that the red phosphors powder conforms to the tetragonal Sr₂MgSi₂O₇. Impurity structure appears when more than 20% Eu³⁺ is doped. The samples show a strong emission line at 615 nm and the intensity increases with the increase of Eu³⁺ concentration until concentration quenching occurs. Charge compensation assists in the reduction of the impurity structure and vacancies; hence the luminescent intensity is enhanced. The decay measurement indicates that the lifetime of Eu³⁺ emission is about 2-3 ms. Some of the Eu³⁺ can be reduced to Eu²⁺; this is also discussed.     

Enhanced luminescent properties of long-persistent Sr2MgSi2O7:Eu, Dy phosphor prepared by the co-precipitation method

Sr₂MgSi₂O₇:Eu²⁺, Dy³⁺ phosphors were prepared by the (aminopropyl)-triethoxysilane (APTES) co-precipitation method. Effects of synthesis temperature on the crystal characteristics, luminescent properties and afterglow performance of Sr₂MgSi₂O₇:Eu²⁺, Dy³⁺ phosphors have been discussed in detail and compared with the corresponding commercial product. The experimental results indicated that the sample could be synthesized at a relatively lower temperature and had better performance on the above-mentioned properties using the co-precipitation method.     

Effects of dopant concentrations on phosphorescence properties of Eu/Dy-doped Sr3MgSi2O8

Long afterglow Sr₃MgSi₂O₈: Eu, Dy phosphor with high brightness was prepared by sintering at high temperature and weak reductive atmosphere. The luminescent properties of this photoluminescent pigment were studied systematically by investigating concentration effects. The analytical results indicated that the main emission peaks appear at 482 nm. The excitation and emission spectra of this phosphor show that both of them are broadband. This is ascribed to the 4f⁷→4f⁶5d¹ transition of Eu²⁺ in the pigment matrix, which is in good agreement with the calculated value of 470 nm, and implies that luminescent centers Eu²⁺ occupy the deca-coordinated Sr²⁺ sites with the host of Sr₃MgSi₂O₈.     

Effects of non-stoichiometry on crystallinity, photoluminescence and afterglow properties of Sr2MgSi2O7:Eu, Dy phosphors

Eu²⁺, Dy³⁺ co-doped Sr₂MgSi₂O₇ phosphors with deficient, stoichiometric or excess amounts of silicon are prepared by solid-state reaction. XRD and SEM results indicate that all the samples studied are found to be free from impurities and samples with SiO₂ excess possess better crystallinity and larger grain size. Photoluminescence reveals that the position of Eu²⁺ emission is not changed with various compositions. However, both photoluminescence intensity and afterglow properties are increased by an incorporation of excess SiO₂ and are decreased by SiO₂ deficiency. The thermoluminescence results show that the corresponding increase or decrease in afterglow is associated with trap density, but no change in trap depth. The underlying reason of photoluminescence and afterglow enhancement is discussed.     

Electronic structure of the Sr2MgSi2O7:Eu persistent luminescence material

The electronic structures of the distrontium magnesium disilicate (Sr₂MgSi₂O₇(:Eu²⁺)) materials were studied by a combined experimental and theoretical approach. The UV-VUV synchrotron radiation was applied in the experimental study while the electronic structures were investigated theoretically by using the density functional theory. The structure of the valence and conduction bands and the band gap energy of the material as well as the position of the Eu²⁺ 4f ground state were calculated. The calculated band gap energy (6.7 eV) agrees well with the experimental value of 7.1 eV. The valence band consists mainly of the oxygen states and the bottom of the conduction band of the Sr states. The calculated occupied 4f ground state of Eu²⁺ lies in the energy gap of the host though the position depends strongly on the Coulomb repulsion strength. The position of the 4f ground state with respect to the valence and conduction bands is discussed using the theoretical and experimental evidence available.     

Photoluminescence and afterglow behavior of Eu, Dy and Eu, Dy in Sr3Al2O6 matrix

This paper reports the photoluminescence and afterglow behavior of Eu²⁺ and Eu³⁺ in Sr₃Al₂O₆ matrix co-doped with Dy³⁺. The samples containing Eu²⁺ and Eu³⁺ were prepared via solid-state reaction. X-ray diffraction (XRD), photo luminescent spectroscope (PLS) and thermal luminescent spectroscope (TLS) were employed to characterize the phosphors. The comparison between the emission spectra revealed that Sr₃Al₂O₆ phosphors doped with Eu²⁺, Dy³⁺ and Eu³⁺, Dy³⁺ showed different photoluminescence. The phosphor doped with Eu³⁺, Dy³⁺ showed an intrinsic f-f transition generated from Eu³⁺, with two significant emissions at 591 and 610 nm. However, the phosphor doped with Eu²⁺, Dy³⁺ revealed a broad d-f emission centering around 512 nm. After the UV source was turned off, Eu²⁺, Dy³⁺ activated Sr₃Al₂O₆ phosphor showed excellent afterglow while Eu³⁺, Dy³⁺ activated phosphor almost showed no afterglow. Thermal simulated luminescence study indicated that the persistent afterglow of Sr₃Al₂O₆: Eu²⁺, Dy³⁺ phosphor was generated by suitable electron traps formed by the co-doped rare-earth ions (Dy³⁺) within the host.     

Luminescence properties of Tm co-doped Sr2Si5N8:Eu red phosphor

The Sr₂Si₅N₈:Eu²⁺ phosphors, both undoped and doped with Tm³⁺, were synthesized by high temperature solid-state method. The XRD pattern shows that only Sr₂Si₅N₈ phase is formed whatever Tm³⁺ was doped or not. The peak positions of both phosphors are centered at 612 nm which is assigned to the 4f⁶5d→4f⁷ transition of Eu²⁺. It implies that the crystal field, which affects the 5d electron states of Eu²⁺, is not changed dramatically after the phosphor is doped with Tm³⁺. The afterglow time is about 10 min after Tm³⁺ ion is introduced into the phosphor. The concentration of Tm³⁺ has little influence on the afterglow time of the phosphor. The depths of trap energy level of the two phosphors were calculated based on the TL spectra. The depths of Sr₂Si₅N₈:Eu²⁺ and Sr₂Si₅N₈:Eu²⁺, Tm³⁺ are 1.75 and 1.01 eV, respectively.     

Orange emission enhancement by energy transfer in Sr3Al2O5Cl2:Ce, Eu phosphor for solid-state lighting

Orange-emissive Ce³⁺/Eu²⁺ co-doped Sr₃Al₂O₅Cl₂ phosphors were synthesized by a solid-state reaction. The large overlap between the emission spectrum of blue Sr₃Al₂O₅Cl₂:Ce³⁺ and the excitation spectrum of orange Sr₃Al₂O₅Cl₂:Eu²⁺, and the shortening trend in lifetime of Ce³⁺ donors with increasing Eu²⁺ concentration in Sr₃Al₂O₅Cl₂:Ce³⁺, Eu²⁺ provide the strong evidence of energy transfer from Ce³⁺ to Eu²⁺ ions. It supports that the orange emission intensity of the optimal co-doped phosphor is 1.5 times stronger than that of single Eu²⁺-doped one. The Sr₃Al₂O₅Cl₂:Ce³⁺, Eu²⁺ phosphor is a promising orange-emitting phosphor for warm-white-light-emitting diode because of its effective excitation in the near ultraviolet range.     

Photoluminescence and gamma-ray irradiation of SrAl2O4:Euand Y2O3:Eu phosphors

Y₂O₃:Eu³⁺ phosphor is a very attractive material for use as a red phosphor in many fields. SrAl₂O₄:Eu²⁺ belongs to long lasting phosphor (LLP) and it is a useful bluish-green luminescence material, which can also be a promising candidate as a simple and easy-to-use radiation detection element for visual display of two dimensional radiation distributions. In the present study, both these two kinds of phosphors were synthesized using high temperature solid state reactions. In our work, the influence of gamma-ray irradiation on the properties of these two kinds of phosphors was studied by comparing photoluminescence, brightness and the decay curve of unirradiated and gamma-ray-irradiated samples. Conclusions from the present work can be briefly summarized as follows. In irradiated samples, the brightness is decreased without sensible change in the wavelength distribution of the luminescence spectrum and in the decay kinetic upon gamma exposure. Moreover, the emission due to Eu³⁺→Eu²⁺ conversion in Y₂O₃:Eu³⁺ phosphors was not observed in our sample after irradiation to high exposure. Also the brightness of SrAl₂O₄:Eu²⁺ phosphor turned out to decrease after the exposition to ionizing radiation while the luminescence wavelength distribution remained unchanged. The reason for the effect of gamma-ray irradiation on the properties of phosphors is also discussed in the paper.     

Preparation of long-afterglow colloidal solution of Sr2MgSi2O7: Eu, Dy by laser ablation in liquid

We have successfully prepared a novel nanoparticle solution of Sr₂MgSi₂O₇: Eu²⁺, Dy³⁺ with afterglow properties by means of laser ablation in liquid. This process also produced by-products of different kinds, depending on the liquid used. The amount of by-product and the size of the nanoparticles were controlled by the energy density of laser ablation. The amount of by-product was reduced by a decrease in the energy density, which also decreased the particle size of the nanoparticles. The PL spectrum of the nanoparticles was the same as that of the target materials used for laser ablation. The afterglow properties deteriorated with a decrease in particle size. We concluded that an increase in specific surface area caused by a decrease in particle size resulted in the decrease of luminescent intensity.     

Crystal structure of BaCa2MgSi2O8 and the photoluminescent properties activated by Eu

Rietveld refinements of X-ray powder diffraction data have confirmed the crystal structure of BaCa₂MgSi₂O₈ prepared by a standard solid-state method. The final reliable factors were R_wp=10.91%, R_p=8.10%, R_I=2.71%, and R_F=1.14%. BaCa₂MgSi₂O₈ crystallizes in the trigonal space group P3¯m1 (no. 164) with a=5.430(3) Å and c=6.807(2) Å. The oxide has a layered structure constructed from the unit layers built up by corner-sharing MgO₆ octahedra and SiO₄ tetrahedra. Ba and Ca atoms occupy the distinct crystallographic sites; Ba atom is sited in the interlayer space and Ca atom is embedded in the layer framework. This structure was not disrupted by doping of Eu²⁺ ions.The Eu²⁺-doped BaCa₂MgSi₂O₈ exhibited an intense blue emission based on 5d-4f electron transitions of Eu²⁺ ions under 254 nm excitation. This emission has a sufficient chromaticity as a blue phosphor. An additional analysis of the emission spectra using an empirical formula indicates that Eu²⁺ is distributed into both Ba and Ca sites.     

Synthesis and luminescence properties of Eu, Ce and Tb-activated Sr3La2(BO3)4 under UV excitation

The spectroscopic properties in UV-excitable range for the phosphors of Sr₃La₂(BO₃)₄:RE³⁺ (RE³⁺=Eu³⁺, Ce³⁺, Tb³⁺) were investigated. The phosphors were synthesized by conventional solid-state reactions. The photoluminescence (PL) spectra and commission international de I'Eclairage (CIE) coordinates of Sr₃La₂(BO₃)₄:RE³⁺ were investigated. The f-d transitions of Eu³⁺, Ce³⁺ and Tb³⁺ in the host lattices are assumed and corroborated. The PL and PL excitation (PLE) spectra indicate that the main emission wavelength of Sr₃La₂(BO₃)₄:Eu³⁺ is 611 nm, and Sr₃La₂(BO₃)₄:Ce³⁺ shows dominating emission peak at 425 nm, while Sr₃La₂(BO₃)₄:Tb³⁺ displays green emission at 487, 542, 582 and 620 nm. These phosphors were prepared by simple solid-state reaction at 1000 °C. There are lower reactive temperature and more convenient than commercial phosphors. The Sr₃La₂(BO₃)₄:Tb³⁺ applied to cold cathode fluorescent lamp was found to emit green light and have a major peak wavelength at around 542 nm. These phosphors may provide a new kind of luminescent materials under ultraviolet excitation.     

Sr2CeO4:Eu and Sr2CeO4:5 mol% Eu, 3 mol% Dy microphosphors: Wet chemistry synthesis from hybrid precursor and photoluminescence properties

In this article, Sr₂CeO₄:x mol% Eu³⁺ and Sr₂CeO₄:5 mol%Eu³⁺, 3 mol% Dy³⁺ phosphors were synthesized from assembling hybrid precursors by wet chemical method. As-prepared samples present uniform grain-like morphology and the particle size is about 0.2 μm. The luminescence spectra of Sr₂CeO₄:x mol% Eu³⁺ have been measured to examine the influence of the intensity of red emission lines for Eu³⁺ on the concentration of Eu³⁺, showing that the intensity of the red emission increases with an increase of the concentration from 1 to 5 mol%. Additionally, from the emission spectra of Sr₂CeO₄:5 mol%Eu³⁺, 3 mol% Dy³⁺ phosphors, the characteristic lines of Dy³⁺ have also been observed. This result indicates that there also exists an energy transfer process between Sr₂CeO₄ and Dy³⁺.     

Eu/Tb ions co-doped white light luminescence Y2O3 phosphors

Y₂O₃:Eu³⁺, Tb³⁺ phosphors with white emission are prepared with different doping concentration of Eu³⁺ and Tb³⁺ ions and synthesizing temperatures from 750 to 950 °C by the co-precipitation method. The resulted phosphors were characterized by X-ray diffraction (XRD) and photoluminescence (PL) spectroscopy. The results of XRD indicate that the crystallinity of the synthesized samples increases with enhancing the firing temperature. The photoluminescence spectra indicate the Eu³⁺ and Tb³⁺ co-doped Y₂O₃ phosphors show five main emission peaks: three at 590, 611 and 629 nm originate from Eu³⁺ and two at 481 and 541 nm originate from Tb³⁺, under excitation of 250-320 nm irradition. The white light luminescence color could be changed by varying the excitation wavelength. Different concentrations of Eu³⁺ and Tb³⁺ ions were induced into the Y₂O₃ lattice and the energy transfer from Tb³⁺→Eu³⁺ ions in these phosphors was found. The Commission International de l’Eclairage (CIE) chromaticity shows that the Y₂O₃:Eu³⁺, Tb³⁺ phosphors can obtain an intense white emission.     

Synthesis and characterization of Sr3Al2O6：Eu2＋, Dy3＋ phosphors prepared by sol-gel-combustion processing

A type of red luminescent Sr3Al2O6:Eu2+, Dy3+ phosphor powder is synthesised by sol-gel-combustion processing, with metal nitrates used as the source of metal ions and citric acid as a chelating agent of metal ions. By tracing the formation process of the sol-gel, it is found that it is necessary to reduce the amount of NO3- by dropping ethanol into the solution for forming a stable and homogeneous sol-gel. Thermogravimetric and Differential Scanning Calorimeter Analysis, x-ray diffractionmeter, scanning electron microscopy and photoluminescence spectroscopy are used to investigate the luminescent properties of the as-synthesised Sr3Al2O6:Eu2+, Dy3+. The results reveal that the Sr3Al2O6 crystallises completely when the combustion ash is sintered at 1250 C. The excitation and the emission spectra indicate that the excitation broadband lies mainly in a visible range and the phosphors emit a strong light at 618 nm under the excitation of 472 nm. The afterglow of (Sr0.94Eu0.03Dy0.03)3Al2O6 phosphors sintered at 1250 ℃ lasts for over 1000 s when the excited source is cut off.     

Highly water resistant surface coating by fluoride on long persistent Sr4Al14O25:Eu/Dy phosphor

A novel and efficient method of providing moisture resistance of inorganic particles such as divalent europium activated strontium aluminate phosphors (Sr₄Al₁₄O₂₅:Eu²⁺/Dy³⁺) was developed by firing the phosphor in the presence of appropriate amount of ammonium fluoride at a temperature of 600-700 °C. Scanning electron microscopy, X-ray diffraction, FT-IR, EDAX and Photoluminescence measurements were carried out to characterize the uncoated and coated samples. The pH measurements were carried out for the water resistivity measurements. The phosphor particles became coated with a moisture-impervious thin coating that did not suppress the luminescence of the phosphor and can withstand complete immersion in water for long periods of time, showing very high water resistivity.     

Tunable luminescent properties by adjusting the Sr/Ba ratio in Sr1.97−xBaxMgSi2O7:Eu0.01, Dy0.02 phosphors

The long afterglow phosphors Sr_1.97−xBa_xMgSi₂O₇:Eu²⁺_0.01, Dy³⁺_0.02 (x=0, 0.4, 0.8, 1.2, 1.6 and 1.97) were synthesized via high temperature solid-state reaction. The phase identification reveals that the crystal plane spacing becomes greater with the decrease in the Sr/Ba ratio. Phase transition occurs when x=1.97. A nonlinear relationship between the emission peak and the crystal plane spacing is obtained with the decrease of the Sr/Ba ratio. This ascribes to the splitting of the 5d level of the Eu²⁺ and the change of the crystal field strength. The duration of the afterglow becomes shorter with the decrease of the Sr/Ba ratio. It may ascribe to deeper trap depth, lower trap concentration and the embarrassment of the transfer of carriers.     

Photoluminescence properties of Sr1-xSi2O2N2: Eux as green to yellow-emitting phosphor for blue pumped white LEDs

This study evaluated potential applications of green to yellow-emitting phosphors (Sr_1−xSi₂O₂N₂: Eu²⁺_x) in blue pumped white light emitting diodes. Sr_1-xSi₂O₂N₂: Eu²⁺_x was synthesized at different Eu²⁺ doping concentrations at 1450 °C for 5 h under a reducing nitrogen atmosphere containing 5% H₂ using a conventional solid reaction method. The X-ray diffraction patterns of the prepared phosphor (Sr_1-xSi₂O₂N₂: Eu²⁺_x) were indexed to the SrSi₂O₂N₂ phase and an unknown intermediate phase. The photoluminescence properties of these phosphors (Sr_1−xSi₂O₂N₂: Eu²⁺_x) showed that the samples were excited from the UV to visible region due to the strong crystal field splitting of the Eu²⁺ ion. The emission spectra under excitation of 450 nm showed a bright color at 545-561 nm. The emission intensity increased gradually with increasing Eu²⁺ doping concentration ratio from 0.05 to 0.15. However, the emission intensity decreased suddenly when the Eu²⁺ concentration ratio was >0.2. As the doping concentration of Eu²⁺ was increased, there was a red shift in the continuous emission peak. These results suggest that Sr_1-xSi₂O₂N₂: Eu₂⁺_x phosphor can be used in blue-pumped white light emitting diodes.     

A novel blue-emitting long-lasting proyphosphate phosphor Sr2P2O7:Eu,Y

By introducing the Y³⁺ into Sr₂P₂O₇:Eu²⁺, we successfully prepared a kind of new phosphor with blue long-lasting phosphorescence by the high-temperature solid-state reaction method. In this paper, the properties of Sr₂P₂O₇:Eu²⁺,Y³⁺ were investigated utilizing XRD, photoluminescence, luminescence decay, long-lasting phosphorescence and thermoluminescence (TL) spectra. The phosphor emitted blue light that was related to the 4f⁶5d¹-⁸S_7/2 transition of Eu²⁺. The bright blue phosphorescence could be observed by naked eyes even 8 h after the excitation source was removed. Two TL peaks at 317 and 378 K related to two types of defects appeared in the TL spectrum. By analyzing the TL curve the depths of traps were calculated to be 0.61 and 0.66 eV. Also, the mechanism of LLP was discussed in this report.     

Phosphorescent and thermoluminescent properties of SrAl2O4:Eu,Dy phosphors prepared by solid state reaction method

Long persistent SrAl₂O₄:Eu²⁺ phosphors co-doped with Dy³⁺ were prepared by the solid state reaction method. The main diffraction peaks of the monoclinic structure of SrAl₂O₄ were observed in all the samples. The broad band emission spectra at 497 nm for SrAl₂O₄:Eu²⁺, Dy³⁺ were observed and the emission is attributed to the 4f⁶5d¹ to 4f⁷ transition of Eu²⁺ ions. The samples annealed at 1100–1200 °C showed similar broad TL glow curves centered at 120 °C. The similar TL glow curves suggest that the traps responsible for them are similar. The long afterglow displayed by the phosphors annealed at different temperatures, may be attributed to the Dy³⁺ ions acting as the hole trap levels, which play an important role in prolonging the duration of luminescence.