固-固接触界面热传输研究

提出了固-固接触热传导接触界面层的概念并进行了解释。接触界面层的建立,把微结构的散射和辐射热传导机制统一于界面层内,通过对接触界面层、接触界面层的厚度和界面层热导率等的讨论,初步揭示了接触界面层热传导的机制。在界面层微观传热的机制上,建立了接触界面层热阻预测模型,并把模型预测接触热阻值与扩散失陪模型(DMM)以及实验值进行了比较。结果显示该模型克服了DMM模型预测值偏低的缺陷,这些将对接触界面层的微尺度热分析有一定的帮助。     

Acoustic backscattering enhancements resulting from the interaction of an obliquely incident plane wave with an infinite cylinder

Background and objective

The analysis of the acoustic backscattering enhancements from tilted cylinders is of particular importance in determining some of the (visco)elastic properties of the cylinder, and/or its surrounding fluid in ultrasonic non-destructive evaluation (NDE) and imaging (NDI) applications. Previous related investigations on an aluminum cylinder limited to incidence angles varying from 0° to 40°, revealed the existence of an anomalous “pseudo-Rayleigh” mode (above the critical Rayleigh angle) identified as the rigid-body translational dipole (n = 1) mode. The objective here is to provide a complete investigation on the backscattering enhancements for incidence angles larger than 40° for various elastic and viscoelastic cylinder materials.

Method

Using the partial-wave series solution for the linear scattering by an infinite circular cylinder, the acoustic backscattering from isotropic elastic and viscoelastic (polymer-type) cylinders excited by an obliquely incident plane acoustic wave is investigated. Total and resonance backscattering form functions are calculated for several elastic and viscoelastic cylinder materials immersed in water versus the angle of incidence 0° ? α < 90°. The “pure” resonance peaks are isolated by subtracting a rigid background from the total form function, so the associated resonance modes are properly identified.

Results and conclusion

The plots of the partial-wave series reveal acoustic backscattering enhancements (not shown in previous investigations) generally occurring at ka? 0.1 at a critical angle α_c bounded by the longitudinal and shear waves coupling angles θ_L=sin^-1(c/c_L) and θ_S=sin^-1(c/c_S) such that θ_L<α_c<θ_S (where c_L and c_S are the phase velocities of the longitudinal and shear waves inside the elastic cylinder, and c is the speed of sound in the surrounding medium). It is shown here that the backscattering enhancements with a critical angle θ_L<α_c<θ_S result from the excitation of the monopole (n = 0) resonance mode. Moreover, additional acoustic backscattering enhancements still occur in the range 1 ?ka? 6 even though the angle of tilt is greater than the Rayleigh wave coupling angle θ_R=sin^-1(c/c_R) (where c_R is the Rayleigh wave velocity in an elastic half-space). The resonance scattering theory shows that such additional enhancements are associated with the excitation of a dipole (n = 1) resonance mode which may result from the interference of meridional and/or helical waves propagating along the cylinder’s surface. It is therefore essential to consider tilt angles ranging from normal to end-on incidence for a complete analysis of the backscattering by elastic and viscoelastic cylinders.     

Harmonic generation in superconducting Bi(Pb)SrCaCuO thick films

We present a detailed study of harmonic generation in Bi(Pb)SrCaCuO superconducting thick film prepared by screen printing technique. A comparative study of amplitude of harmonics of two films of different J_c have been carried out. The variation of amplitudes of the harmonics are studied as a function of magnitude of ac and dc field. The temperature dependence of amplitude of third harmonic (V³) is studied with increasing amplitude as well as frequency of ac field. These results are analyzed in the frame work of critical state model. V₃ -T curve also indicates the presence of two phases in Bi(Pb)SrCaCuO film.     

Role of topological phase-defects in the parametric generation process

We show that topological phase-defects are spontaneously generated from noise fluctuations in the degenerate configuration of the parametric interaction. These localized coherent structures are shown to affect the coherence properties of the parametrically generated field. It is shown that the emergence of coherence in the fundamental field relies on a previously unrecognized process of mutual annihilation of pairs of neighboring phase-defects. More precisely, the density of phase-defects N, and the time correlation τ_c of the generated field, are shown to exhibit a power-law behavior with the propagation length, i.e., .     

A study of contact interface and wear diagnosis for hand taps using ultrasonic method

This work was to study the contact interface between a set of used hand taps and another new one based on the regional scanning of ultrasound. The contact image was a novel disclosure for hand taps contact. The objective of this work was to provide a wear diagnosis by making a comparison of contact area between the used and the new hand taps. The 2D maps showed an apparent change not only in area sizes but also in contact shapes between the used and the new hand taps. The 3D contact images also provided useful information to show the degree of contact.The contact area between the tap and the workpiece was calculated using an image analysis software package. The range of contact areas varied from 2.49 mm² to 35.31 mm² for the used hand taps and from 1.19 mm² to 28.55 mm² for the new taps, depending on the definition of the contrast ratio. The result provided another scientific data for users to decide a correct timing for the tool replacement. In addition, maps of reflection coefficient and pressure contour distribution were presented. The range of contact pressure varied from 2.5 Mpa to 4.2 Mpa.     

Harmonic generation studies in laser ablated YBCO thin film grown on 〈100〉 MgO

The generation of harmonics in a laser ablated YBCO film deposited on a 〈100〉 MgO substrate is reported. Higher odd harmonics appeared when the film was subjected to an ac field. The presence of a dc field induces only the second harmonic with a small value of slope ofV ₂−H _dc curve (δV ₂/δH _dc) compared to bulk YBCO. The variation of the amplitude of third harmonic (V ₃) withH _ac and temperature was studied. These results are explained in terms of a critical state model. The observation of only a small amplitude of second harmonic (V ₂) with a smallδV ₂/δH _dc is explained in terms of a special kind of clean grain boundary present in YBCO laser ablated films on 〈100〉 MgO.     

Evolution of an intense elliptically polarized electromagnetic wave in underdense plasmas

An elliptically polarized electromagnetic wave in an underdense plasma acquires a longitudinal component of the electric field which oscillates as even harmonics of the fundamental frequency. The phase shift between transverse field components and the wave amplitudes exhibit nonlinear oscillations.     

一种用于界面接触状态评价的超声信号相似度分析方法*

针对常规超声反射系数对界面接触状态灵敏度受限问题,论文发展一种用于界面接触状态评价的超声信号相似度分析方法。针对不同压力下承压界面超声检测信号,研究了激励信号带宽、相似度函数类型及分析域对相似度分析方法对界面接触状态评价的影响。结果表明,检测信号的相似度指标随压力增加呈现明显规律性。激励信号带宽、相似度函数类型和分析域对界面接触状态评价效果有很大的影响。宽带激励下的时域欧式距离指标对界面压力微变化最为敏感,可用于界面接触状态的定量评价。     

非线性电磁超声对铝合金拉伸变形评价研究

非线性系数是描述材料中微纳尺度损伤的特征参量,非线性系数常通过接触式压电超声进行检测,但耦合剂引起的非线性一般是未知的,针对这一问题,提出了一种非接触式电磁超声非线性纵波检测方法。该方法基于洛伦兹力机理在试件表面产生的振动弹性波,利用不同拉伸载荷下所制备的损伤试件,分别利用压电超声、电磁超声进行非线性超声系数测量。实验结果表明:利用两种非线性超声检测的相对非线性系数与铝合金的拉伸形变呈单调关系,同时也论证了电磁超声纵波基于非线性理论对塑性变形评估的可行性。     

Multiple scattering of an obliquely incident plane acoustic wave from a grating of immersed cylindrical shells

The study of the interaction of acoustic waves with cylindrical structures has numerous applications including the ultrasonic nondestructive testing of materials. In this paper, using a new mathematical model presented for the scattering of obliquely incident plane acoustic waves from a grating of immersed cylindrical shells, a detailed study of the resonant interaction of A-wave resonances originating from the shells is conducted. The nature of A-wave resonances and the effect of center-to-center distance of the shells on these resonances are examined. It is observed that this resonant interaction not only results in the splitting of A-wave resonances, but also causes an increase in resonance amplitudes. This interaction phenomenon is not seen in Rayleigh, whispering gallery and guided wave resonances. It is also shown that increasing the angle of wave incidence to the grating weakens the A-wave resonant interactions. The numerical results obtained from the mathematical model are compared to experimental results available in the literature for gratings composed of two and three aluminum shells. The numerical results are in very good agreement with their experimental counterparts.     

Pure elastic resonance scattering of an obliquely incident plane acoustic wave by a submerged infinite cylinder

I.IntroductionTheResonanceScattcringThcory(RST)asanimportantmethodtoana1yzeacousticscat-teringofsubmergede1asticbodieswascxtcnsivelyuscdforcy1indrica1andspherica1geometries,inc1udingsolidstructuresandho11owoncs.RSTismain1yappliedtostudytheresonancescat-teringspcctra(oracousticspcctra)ofanc1astictargctcxcitedby'theinciderttacousticwavesoastOidentifythetargct.Tocxtracttheresonancescattcringspcctra,anappropriatebackgroundsuchasrigidbackgroundorsoftonemust-besubtractcd.Expcrimenta1ly,theReson…     

Harmonic balance approach to the periodic solutions of the (an)harmonic relativistic oscillator

The first-order harmonic balance method via the first Fourier coefficient is used to construct two approximate frequency-amplitude relations for the relativistic oscillator for which the nonlinearity (anharmonicity) is a relativistic effect due to the time line dilation along the world line. Making a change of variable, a new nonlinear differential equation is obtained and two procedures are used to approximately solve this differential equation. In the first the differential equation is rewritten in a form that does not contain a square-root expression, while in the second the differential equation is solved directly. The approximate frequency obtained using the second procedure is more accurate than the frequency obtained with the first due to the fact that, in the second procedure, application of the harmonic balance method produces an infinite set of harmonics, while in the first procedure only two harmonics are produced. Both approximate frequencies are valid for the complete range of oscillation amplitudes, and excellent agreement of the approximate frequencies with the exact one are demonstrated and discussed. The discrepancy between the first-order approximate frequency obtained by means of the second procedure and the exact frequency never exceeds 1.6%. We also obtained the approximate frequency by applying the second-order harmonic balance method and in this case the relative error is as low 0.31% for all the range of values of amplitude of oscillation A.     

Harmonic Generation of High-Power Microwave in Plasma Filled Waveguide

The harmonic generation of high power microwave in plasma filled waveguide is studied and the analytical theory is presented, and the numerical calculation and analysis of second harmonic are done in this paper. The theoretical and numerical analysis show that high power microwave can generate harmonic in the plasma filled waveguide.     

Selective generation of ultrasonic Lamb waves by electromagnetic acoustic transducers

In this paper, we describe a modal expansion approach for the analysis of the selective generation of ultrasonic Lamb waves by electromagnetic acoustic transducers(EMATs). With the modal expansion approach for waveguide excitation, an analytical expression of the Lamb wave's mode expansion coefficient is deduced, which is related to the driving frequency and the geometrical parameters of the EMAT's meander coil, and lays a theoretical foundation for exactly analyzing the selective generation of Lamb waves with EMATs. The influences of the driving frequency on the mode expansion coefficient of ultrasonic Lamb waves are analyzed when the EMAT's geometrical parameters are given. The numerical simulations and experimental examinations show that the ultrasonic Lamb wave modes can be effectively regulated(strengthened or restrained) by choosing an appropriate driving frequency of EMAT, with the geometrical parameters given. This result provides a theoretical and experimental basis for selectively generating a single and pure Lamb wave mode with EMATs.     

Observation of the second harmonic generation pumped by microscopic to extraterrestrial incoherent light sources

I report on the experimental demonstration of the second harmonic generation in bulk nonlinear crystals excited by light emitting diode, halogen lamp and the Sun. Practical application for measurement of autocorrelation functions of incoherent non-laser driven sources via second order nonlinearity is demonstrated for the first time.     

The constancy of the contact angle in viscous liquid motions with pinned contact lines

Consider motion initiated in a viscous liquid in a smooth walled container. The liquid is initially at rest under uniform pressure from an inert gas of negligible inertia. We show that if the contact line is pinned and the interface is single valued, the contact angle has to remain constant throughout the motion. This is true even for motions of finite amplitude. Some implications of the result are discussed.     

界面条件下线型超声相控阵声场特性研究

开展了界面条件下线型超声相控阵声场特性的研究.将带有楔块的超声相控阵问题合理简化为液固界面的情况进行讨论.根据射线声学理论,计算了单阵元在液固界面存在时的辐射声场,进而推导了聚焦法则,得到了超声线型阵在液固界面存在时的声场、位移场表达式.对安装在楔块上的相控阵换能器的辐射声场进行了仿真,并讨论了聚焦对换能器轴向和横向声场的影响,结果表明利用聚焦能提高分辨率和灵敏度,但聚焦区域之外声束性能更差,在实际检测中要合理利用聚焦. 关键词： 超声相控阵 界面 声场 聚焦     

Microcrack localization using a collinear Lamb wave frequency-mixing technique in a thin plate

A novel Lamb wave frequency-mixing technique is proposed for locating microcracks in a thin plate,which does not require the resonance condition of Lamb wave mixing and can accurately locate the microcracks through only one-time sensing.Based on the bilinear stress-strain constitutive model,a two-dimensional finite element(FE)model is built to investigate the frequency-mixing response induced by the interaction between two primary Lamb waves and a microcrack.When two primary Lamb waves of A0 and S0 modes with different frequencies excited on the same side of the plate simultaneously impinge on the examined microcrack,under the modulation of the contact acoustic nonlinearity,the microcrack itself can be deemed as the secondary sound source and it will radiate the Lamb waves of new combined frequencies.Based on the time of flight of the generated A0 mode at difference frequency,an indicator named normalized amplitude index(NAI)is defined to directly locate the multi-microcracks in the given plate.It is found that the number and location of the microcracks can be intuitively visualized by using the NAI based frequency-mixing technique.It is also demonstrated that the proposed frequency mixing technique is a promising approach for the microcrack localization.     

Harmonic balancing approach to nonlinear oscillations of a punctual charge in the electric field of charged ring

The harmonic balance method is used to construct approximate frequency-amplitude relations and periodic solutions to an oscillating charge in the electric field of a ring. By combining linearization of the governing equation with the harmonic balance method, we construct analytical approximations to the oscillation frequencies and periodic solutions for the oscillator. To solve the nonlinear differential equation, firstly we make a change of variable and secondly the differential equation is rewritten in a form that does not contain the square-root expression. The approximate frequencies obtained are valid for the complete range of oscillation amplitudes and excellent agreement of the approximate frequencies and periodic solutions with the exact ones are demonstrated and discussed.     

Electrical contact resistance and dynamic contact stiffness for a cluster of microcontacts: cross-property connection in the low-frequency range

An explicit cross-property connection for a rough interface between the electrical contact resistance and dynamic contact stiffness has been established in the low-frequency limit. The present analysis is based on the first-order asymptotic model of multiple dynamic contact between small flat-ended indenters on an elastic half-space, which is a dynamic analogue of the quasi-static Greenwood model. The obtained results can be used in developing a vibration method for measuring the interface contact stiffness in tribological systems, and in estimating the surface-roughness effect in oscillation indentation tests.