共查询到20条相似文献,搜索用时 31 毫秒
1.
A series of Mo-impregnated Hβ samples, with MoO3 loading in Hβ zeolite in the mass fraction range of 0. 5%-6.0%, were studied by means of XRD and IR in order to characterize their structures. Mo/Hβ sampies‘ crystallinity almost linearly decreases with increasing the amount of MoO3 loaded, The IR spectra and XRD patterns suggest that the progressive destabilization of the Hβ zeolite structure is caused by increasing Mo loading in (MoO3 Hβ zeolite). During the calcination, Al2(MoO4)3 formed from the dealumination of Hβ zeolite, causes the substantially partial breakdown of the zeolite framework when the Mo loading in MoO3 Hβ is relatively high. 相似文献
2.
LIUSheng-lin HUANGSheng-jun XINWen-jie BAIJie XIESu-juan XULong-ya 《高等学校化学研究》2005,21(2):213-216
A series of 3. OMo/(Hβ γ-Al2O3) samples with γ-Al2O3 contents in the range of 0-100% (mass fraction) was studied by means of XRD, NH3-TPD, TPR and BET determinations for characterizing their structures. The Hβ zeolite structure in the 3.0Mo/Hβ sample can be effectively stabilized by adding some γ-Al2O3 to Hβ zeolite. γ-Al2O3 mainly favors the formation of polymolybdate or multilayered Mo oxide, while Hβ mainly forms the Al2(MoO4)3 species, as evaluated by the TPR technique. When used as the catalyst for the metathesis of butylene-2 and ethylene to propylene, there exists a close correlation between the specific surface area and stability of the catalyst. The specific surface area of the catalyst shows the maximum when (Hβ γ-Al2O3) contains 30%γ-Al2O3, which is in agreement with that of the time needed for the reaction stablization. In the case of maximum surface area, the rate of coke deposition is the minimum. 相似文献
3.
A series of 3. 0Mo/(Hβ γ-Al2O3) samples with γ-Al2O3 contents in the range of 0-100% (mass fraction) was studied by means of XRD, NH3-TPD, TPR and BET determinations for characterizing their structures. The Hβ zeolite structure in the 3. 0Mo/Hβ sample can be effectively stabilized by adding some γ-Al2O3to Hβ zeolite. γ-Al2O3 mainly favors the formation of polymolybdate or multilayered Mo oxide, while Hβmainly forms the Al2(MoO4)3 species, as evaluated by the TPR technique. When used as the catalyst for the metathesis of butylene-2 and ethylene to propylene, there exists a close correlation between the specific surface area and stability of the catalyst. The specific surface area of the catalyst shows the maximum when (Hβ γ-Al2O3) contains 30%γ-Al2O3, which is in agreement with that of the time needed for the reaction stablization. In the case of maximum surface area, the rate of coke deposition is the minimum. 相似文献
4.
SHEN Jian-Ping MA Jun SUN Tie JIANG Da-ZhenDepartment of Chemistry Jilin University Changchun Jilin ChinaMIN En-ZeResearch Institute of Petroleum Processing Beijing China 《中国化学》1995,13(2):124-130
The effects of alkali metals (Na+,K+) on the exchange degree of Hβ zeolite under different conditions and the conversion of α(or β)-methylnaphthalene over the alkalized zeolites were studied. The results showed that the H+ of Hβ zeolite is totally replaced by the Na+ of NaCl solution, while partially exchanged by the K+ of KC1 solution, there is an exchange equilibrium between the H+ and K+ for Hβ zeolite (Si/Al=17.23) and the value of equilibrium is 88.39. The exchange degree also increases with increasing the Si/Al of the samples. It was suggested that these resluts are attributed to the electrostatic field in the pore of Hβ zeolite and the nature of zeolite and the properties of alkali metal. The isomerization of α(or β)-methylnaphthalene is the main reaction over the samples and it is more favour on the proper acid-base sites of KHβ zeolite. 相似文献
5.
ZSM-5/β co-crystalline zeolites with different content of ZSM-5 have been synthesized by adding different amount of ZSM-5 to the synthetic system ofβ zeolite with NaAlO2, silica sol as the source of aluminum and silica, respectively, and TEA as the template under controlled condition of the synthesis. The ZSM-5/β co-crystalline zeolite was studied by XRD, SEM, BET and NH3-TPD. The reaction activity of toluene alkylation was investigated with a mixture of toluene-methanol as the feedstock in a pulse micro-reactor over the ZSM-5/β co-crystalline zeolite. It is found that ZSM-5/β co-crystalline zeolite has two kinds of zeolite structure including ZSM-5 and β zeolite, not in the form of a physical mixture. The pore structure of ZSM-5/β co-crystalline zeolites is different from that forβ zeolite, ZSM-5and their physical mixture. In addition, the peaks of both high and low temperature desorption of ammonia over the ZSM-5/β co-crystalline zeolite shift 23 ℃ to lower temperatures and the acid amount of its strong acid is 3% more than the physical mixture. So the ZSM-5/β co-crystalline zeolite produces the highest content of xylene, which is 10.4% higher than the physical mixture. And the ZSM-5/β co-crystalline zeolite has better selectivity for toluene alkylation and weaker de-methylation than β zeolite, ZSM-5 and their physical mixture. 相似文献
6.
A series of Mo-containing ZSM-11 zeolite catalysts has been prepared by calcining mixtures of MoO3 and ZSM-11 zeolite, and studied by using X-ray diffraction and infrared spectroscopy. It has been found that MoO3 can be well dispersed on ZSM-11 zeolite as a surface molybdenum species, and mostly within the zeolite cavities. With increasing the amount of dispersed MoO3, the zeolite framework is destroyed, and the crystallinity of the zeolite decreases. It seems that this perturbation is due to the strong interaction between dispersed MoO3 and zeolite framework. 相似文献
7.
TianboZhao HuiyingZhang FengyanLi ChaoYang BaoningZong 《天然气化学杂志》2005,14(2):95-100
ZSM-5/β co-crystalline zeolites with different content of ZSM-5 have been synthesized by adding different amount of ZSM-5 to the synthetic system of β zeolite with NaAlO2, silica sol as the source of aluminum and silica, respectively, and TEA as the template under controlled condition of the synthesis. The ZSM-5/β co-crystalline zeolite was studied by XRD, SEM, BET and NH3-TPD. The reaction activity of toluene alkylation was investigated with a mixture of toluene-methanol as the feedstock in a pulse micro-reactor over the ZSM-5/β co-crystalline zeolite. It is found that ZSM-5/β co-crystalline zeolite has two kinds of zeolite structure including ZSM-5 and β zeolite, not in the form of a physical mixture. The pore structure of ZSM-5/β co-crystalline zeolites is different from that for β zeolite, ZSM-5 and their physical mixture. In addition, the peaks of both high and low temperature desorption of ammonia over the ZSM-5/β co-crystalline zeolite shift 23 ℃ to lower temperatures and the acid amount of its strong acid is 3% more than the physical mixture. So the ZSM-5/β co-crystalline zeolite produces the highest content of xylene, which is 10.4% higher than the physical mixture. And the ZSM-5/β co-crystalline zeolite has better selectivity for toluene alkylation and weaker de-methylation than β zeolite, ZSM-5 and their physical mixture. 相似文献
8.
ZIFeng-lan GUOHong-you WUNian-zu XIEYa-ning HUTian-dou 《高等学校化学研究》2004,20(6):685-689
X-ray photoelectron spectroscopy (XPS) and extended X-ray absorption fine structure (EXAFS) were used to characterize the structure of the mixture of molybdenum oxide and anatase calcined at 723 K. The resuits indicate that molybdenum oxide can disperse onto the surface of anatase (TiO2) and the dispersion threshold is 11.2 mg in per gram of MoO3 or 4.8 Mo atoms/nm^2 TiO2. When the coment of MoO3 is below the dispersion threshold, MoO3 species is in highly dispersed state interacting strongly with TiO2 support and in discrete tetrahedral coordination. [MoO4], on the surface of TiO2. When the MoO3 loading is above this value, MoO3 exists in both dispersed phase and crystalline phase. MoO3 in dispersed phase is still a discrete [MoO4] tetrahedron; MoO3 in crystal phase is in octahedral coordination. 相似文献
9.
《中国科学B辑(英文版)》2008,(2)
The bimetal-bearing (CePt or LaPt) 12-tungstophosphoric acid (H3PW12O40 (PW)) catalysts supported on dealuminated USY zeolite (DUSY) were prepared by impregnation and characterized by XRD, BET, IR, and H2-chemisorption. Their catalytic activities were tested in the hydroisomerization of n-heptane with a continuous atmospheric fixed-bed reactor. After the steam treatment combined with the acid leaching, as well as the supporting with PW and the bimetals, the DUSY support retains the Y zeolite porosity and the PW well keeps its Keggin structure in catalysts. The doping of Ce into the catalysts enhances the dispersion of Pt on the catalyst surface. The Pt-bearing PW catalysts doped with Ce or La, especially Ce, exhibit much higher catalytic activity and selectivity than the catalysts without dopants at lowered reaction temperatures. At the optimal reaction conditions, i.e., the reaction temperature of 250℃ and WHSV of 1.4 h1, the catalyst with a Pt loading of 0.4%, PW loading of 10% and a molar ratio of Ce to Pt of 15:1 shows a conversion of n-heptane of 70.3% with a high selectivity for isomerization products of 94.1%. 相似文献
10.
The effect of pure and high silica Hβ zeolites on the catalytic performance of toluene combustion over Pd/H/3 catalyst was evaluated.Pure and high silica β zeolites were prepared by direct synthesis procedures,then 0.1 wt% of palladium was impregnated on different Hβ zeolites via incipient wetness technique using palladium nitrate as the Pd source.The Pd/Hβ catalysts were characterized by XRD,N2 adsorption/desorption,H2O adsorption,NH3-TPD,H2-TPR and XPS techniques.With increasing the SIO2/Al2O3 ratio of β zeolite,the activity of the Pd/Hβ catalysts for toluene combustion increased clearly and the pure silica β zeolite supported Pd catalyst showed the best catalytic activity.The superior catalytic performance of Pd/β catalyst prepared from pure silica β zeolite was attributed to its high hydrophobicity and the preserving ability for PdO active species. 相似文献
11.
Hongyan Shang Chenguang Liu Yongqiang Xu Jieshan Qiu Fei Wei 《天然气化学杂志》2006,15(3):203-210
The dispersion of the active phase and loading capacity of the Mo species on carbon nanotube (CNT) was studied by the XRD technique. The reducibility properties of Co-Mo catalysts in the oxide state over CNTs were investigated by TPR, while the sulfided Co-Mo/CNT catalysts were characterized by means of the XRD and LRS techniques. The activity and selectivity with respect to the hydrodesulfurization (HDS) performances on carbon nanotube supported Co-Mo catalysts were evaluated. It was found that the main active molybdenum species in the oxide state MoO3/CNT catalysts were MoO2, but not MoO3, as generally expected. The maximum loading before the formation of the bulk phase was lower than 6% (percent by mass, based on MoO3). TPR studies revealed that the active species in the oxide state Co-Mo/CNT catalysts were reduced more easily at relatively lower temperatures in comparison to those of the Co-Mo/γ-Al2O3 catalysts, indicating that the CNT support promoted or favored the reduction of the active species. The active species of a Co-Mo-0.7/CNT catalyst were more easily reduced than those of the Co-Mo/CNT catalysts with Co/Mo atomic ratios of 0.2, 0.35, and 0.5, respectively, suggesting that the Co/Mo atomic ratio has a great effect on the reducibility of the active species. It was found that the incorporation of cobalt improved the dispersion of the molybdenum species on the support, and a phenomenon of mobilization and re-dispersion had occurred during the sulfurization process, resulting in low valence state Mo3S4 and Co-MoS2.17 active phases. HDS measurements showed that the Co-Mo/CNT catalysts were more active than the Co-Mo/γ-Al2O3 ones for the desulfurization of DBT, and the hydrogenolysis/hydrogenation selectivity of the Co-Mo/CNT catalysts was also much higher than those of the Co-Mo/γ-Al2O3. The Co-Mo/CNT catalyst with a Co/Mo atomic ratio of 0.7 showed the highest activity, whereas the catalyst with a Co/Mo atomic ratio of 0.35 had the highest selectivity. 相似文献
12.
《Journal of Energy Chemistry》2010,(4)
The effect of pure and high silica Hβ zeolites on the catalytic performance of toluene combustion over Pd/Hβ catalyst was evaluated.Pure and high silica β zeolites were prepared by direct synthesis procedures,then 0.1 wt% of palladium was impregnated on different Hβ zeolites via in-cipient wetness technique using palladium nitrate as the Pd source.The Pd/Hβ catalysts were characterized by XRD,N2 adsorption/desorption,H2O adsorption,NH3-TPD,H2-TPR and XPS techniques.With increasing the SiO2/Al2O3 ratio of β zeolite,the activity of the Pd/Hβ catalysts for toluene combustion increased clearly and the pure silica β zeolite supported Pd catalyst showed the best catalytic activity.The superior catalytic performance of Pd/β catalyst prepared from pure silica β zeolite was attributed to its high hydrophobicity and the preserving ability for PdO active species. 相似文献
13.
In this paper, the effect of catalytic support and sulfiding method on the chemical state of supported Co-Mo catalysts is studied by XPS. After sulfidation with in-situ method, the majority of molybdenum in CNT supported CoMo catalyst is transferred to a species with a formal chemical state Mo(Ⅳ) in MoS2 phase, and the rest to Mo(Ⅴ) which consists of Mo coordinated both to O and S, such as MoO2S2^2- and MoO3S^2-. In case of CoMo/γ-Al2O3 catalyst sulfided with in-situ method, a fraction of molybdenum is transferred to formal state Mo(Ⅳ) in the form of MoS2, but there is still a mount of unreduced Mo(VI) phase which is difficult to be sulfided. In CoMo/CNT catalyric system sulfided with ex-situ method, Mo(IV) in the form of MoS2 is detected along with a portion of unreduced Mo(VI) phase, suggesting that not all the Mo phases are reduced and sulfided by ex-situ method. As for CoMo/γ-Al2O3, a portion of molybdenum is sulfided to intermediate reduced state Mo(V) which consists of Mo coordinated both to O and S, such as MoO2S2^2- and MoO3S^2-, in addition, there is still a fraction of unreduced Mo(Ⅵ)phase. XPS analyses results suggest that CNT support facilitates the reduction and sulfidation of active species to a large extent, and that alumina support strongly interacts with active species, hereby producing a fraction of phase which resists complete sulfiding. Catalytic measurements of catalysts in the HDS of dibenzothiophene (DBT) show that CoMo/CNT catalysts are of higher HDS activity and selectivity than CoMo/γ-Al2O3 catalyst, which is in good relation with the sulfiding behavior of the corresponding catalyst. 相似文献
14.
《Journal of Energy Chemistry》2010,(5)
A series of 3.0Mo/MCM-22-Al2O3 catalysts with γ-Al2O3 contents in the range of 0-100 wt%were prepared and applied in the metathesis reaction of ethene and butene-2.Addition of γ-Al2O3 did not affect the structure of MCM-22 zeolite as evidenced by XRD and N2 adsorption measurements.It was deduced from TPR experiments that γ-Al2O3 phase favored the formation of polymolybdate or multilayered Mo oxide,while more Al2(MoO4)3 species were generated over MCM-22 zeolites.Alumina content in the support was directly related to the metathesis activity of ethene and butene-2 to propene.Mo species with higher valence(Mo6+or Mo5+)contributed more to the excellent performance of catalyst than metallic Mo.The best catalyst activity and stability was obtained over 3.0Mo/(MCM-22-30%Al2O3)under the reaction condition of 1.0 MPa and 125℃ using N2 as the pretreatment gas. 相似文献
15.
ZHUANG Bo-Tao LAN An-Jian HE Ling-Jie HUANG Liang-RenFujian Institute of Research on the Structure of Matter Chinese Academy of Sciences State Key Laboratory of Structural Chemistry Fuzhou Fujian China 《中国化学》1994,12(6):495-502
Reaction of [Mo3(CO)7(S,O-C6H4-1,2)3]2- with FeCl2 in MeCN at 60℃ affords a new Mo-Fe-S cluster complex containing MoO3S3 unit and mixed-valeut Mo atoms, [Et4N]2[Mo2Fe-(CO)4(O,S-C6H4-1,2)aCl2] (1). 1 is characterized by elemental analysis, IR, Mossbauer spectra, X-ray photoelectron spectra and mass spectra. And the structure of 1 is suggested as the structure which contains a [Mo(S,O-C6H4-1,2)3] unit of which the two of three sulfur atoms link to a Mo(CO)4-moiety and the three oxygen atoms are coordinated to a FeCl2 ligand. 相似文献
16.
ZENG Yue YAO Su-Wei CAO Xue-Qiang HUANG Hong-Xin ZHONG Zi-Yi GUO He-Tong Department of Chemistry Hunan Normal University Changsha Hunan China Department of Applied Chemistry Tianjin University Tianjin . China 《中国化学》1997,(3)
The induced codeposition mechanism of Mo, P and Ni from the solution of ammoniac citrate was studied by means of steady-state polarization, AC impedance and X-ray Photoelectron Spectroscopy (XPS). The result of electrochemical measurements proved that [NiCit(NH3)2]- is the electro-active species of nickel, though nickel ions exist mainly as [NiCit(NH3)3]- in ammoniac citrate. XPS experiments proved the existence of tetravalent molybdenum corresponding to MoO2 on the surface of some deposits. The intermediate product, MoO2, was probably reduced to Mo in the alloy deposit by atomic hydrogen adsorbed on the induced metal nickel. The reduction of H2PO2- occurs through two distinctive steps with PH3 as an intermediate, which subsequently reacts with atomic hydrogen to form P in the alloy deposit. The electrodeposition mechanism was proposed in this paper. 相似文献
17.
《结构化学》1990,(3)
<正> Guanidinium bis (o - aminophenylarsenic) hexamolybdate belongs to monoclinic space group P21/c,with a=10. 217(2),b= 18. 870(2),c= 10. 939(2)A,β = 102. 82(3)°,Z = 2,V=2056. 4A3,and Dc=2. 477 g·cm-3. Each molecule contains one [(o-NH2C6H4As)2Mo6O24]4- anion and four CN3H6+ cations. In the anion,six distorted MoO6 octahedra are connected with edges-sharing to form a six-membered Mo ring which is capped above and below by two o - aminophenylarsenic groups. There is half a molecule in an asymmetric unit. It is interesting that both phenyl planes are almost perpendicular to the plane of the Mo atoms. The structure of the anion is similar to that of [ (CH3 As)2Mo6O24]4-,[(n-C3H7As)2Mo6O24]4- or [(C6H5CH2As)2Mo6O24]4-. This is the first example of this type of compounds in which the As atom is directly connected to a substituted phenyl group. 相似文献
18.
The substitutions of Ti, Fe and Zr into zeolite Y in the aqueous solutions of (NH4)2TiF6, (NH4)3ZrF7 and (NH4)3FeF6 were systematically Investigated. It was found that Ai atoms in the framework can be replaced by some metallic elements and the extent of substitution depends on the M/A1 ratio of the solution. The maximum allowable M/A1 ratio of the aqueous solution Is related with the radius of the M atom and the stability constant of the MFnm- complex. The substituted zeolite samples with crystallinity greater than 80% were characterized by means of XRD, IR, DTA, TPR and NH3-TPD measurements. The incorporation of Ti, Fe and Zr into the zeolite leads to an increase in the unit cell parameter, a lowering of thermal stability and a red shift of the asymmetric stretching frequency. The extent of these changes is apparently related with the ionic radius of the metallic element and the degree of substitution. The results of various characterization methods show that the het-eroatoms are readily Introduced int 相似文献
19.
The Reaction of Molybdenum with 2,3-Dihydroxynaphthalene 总被引:1,自引:0,他引:1
[H2N(CH2)3NH312[MoO2(C10H6O2)2] (1) was synthesized by the 2,3-dihydroxynaphthalene in the mixed solvent of CH3OH, CH3CN reaction of (n-Bu4N)4[Mo8O26] with and 1,3-propanediarnine. (C5HllN2)2- [HeN(CH2)3NH2][MoO2(CloH6O2)2] (2) was obtained by the reaction of Na2MoO4.2H20 with 2,3-dihydroxynaphthalene in the same solvent above. Both of the complexes possess complex anion [Mo(VI)O2(OC10H6O)2]^2- which shows pseudo-octahedrally coordinated fashion, while the counterions are two protonated 1,3-propanediamine in complex 1 and (CsH11N2)^+ in complex 2. (C5H11N2)+ is the byproduct of reaction 2, which results from combination of acetonitrile with 1,3-propanediamine. Packing diagrams of the two complexes are also different. There is anti-parallel-aligned-double-meso-bilayer unit in complex 1. However there are four chiral anions arranged in anticlockwise orientation in complex 2. 相似文献
20.
Effect of different alkali metal salts on the crystal size and the crystallization rate of ZSM-5 zeolite was de-tailedly investigated in this paper. The samples prepared by adding the different alkali metal salts were character-ized by using XRD, TEM, TG-DSC, BET and IR techniques. The XRD results showed that, for the nanosized ZSM-5 zeolite, the characteristic peaks broadened on the XRD patterns in comparison with the microsized ZSM-5 zeolite. The SEM results verified that the crystal size of zeolites prepared by adding different alkali metal salts had different results, and adding NaCl, NaC2H3O2 and KCl showed the better effect of reducing crystal size, which are about of 40~60nm size. The crystallization curve of adding the different alkali metal salts suggested that the crystallization rate was significantly affected by the anions in the alkali metal salt besides the cations. Moreover, the crystal size likewise depended on the anion in the alkali metal salt. In addition, the BET results suggested that the nanosized ZSM-5 zeolite possessed a larger outer surface area in comparison with the microsized ZSM-5 zeolite. The thermostability of the samples was determined by TG-DSC technique, indicating that the nanosized ZSM-5 zeolite had a poor thermostability as compared with the microsized ZSM-5 zeolite. The possible difference of the samples with different crystal sizes on IR spectra was also given. 相似文献