二步电沉积法制备Au/氧化石墨烯复合薄膜作为SERS基底

采用二步电沉积方法在Ti片表面制备了Au-氧化石墨烯（Au-GO）复合薄膜,通过XRD、SEM、XPS等对薄膜的组成、结构和形貌进行了表征,并以罗丹明6G（R6G）为探针分子,对Au-GO/Ti基底的SERS活性进行了表征。结果显示,Au纳米颗粒尺寸约为60 nm,均匀、致密分布于GO表面,该基底显示出较高的SERS活性,对R6G分子的检测极限可达~10^-10 mol·L^-1,增强因子高达约10⁶,且基底显示出良好的稳定性,在冰箱中存放90 d后,SERS活性仅降低30%左右。     

二步电沉积法制备Au/氧化石墨烯复合薄膜作为SERS基底（英文）

采用二步电沉积方法在Ti片表面制备了Au-氧化石墨烯(Au-GO)复合薄膜,通过XRD、SEM、XPS等对薄膜的组成、结构和形貌进行了表征,并以罗丹明6G(R6G)为探针分子,对Au-GO/Ti基底的SERS活性进行了表征。结果显示,Au纳米颗粒尺寸约为60 nm,均匀、致密分布于GO表面,该基底显示出较高的SERS活性,对R6G分子的检测极限可达~10~(-1)0 mol·L~(-1),增强因子高达约106,且基底显示出良好的稳定性,在冰箱中存放90 d后,SERS活性仅降低30%左右。     

TiN纳米管的制备及其作为SERS基底的应用

采用阳极氧化法在钛片表面制备TiO₂纳米管阵列,并经氨气氮化得到TiN纳米管阵列,通过XRD、SEM、XPS、UV-Vis对基底的组成、形貌和光学性能进行了表征,并以罗丹明6G（R6G）为探针分子,对TiN基底的SERS活性进行检测。结果显示,TiO₂纳米管经800℃以上高温可转化为TiN纳米管,纳米管直径在100~200 nm,排列规整有序。氮化后的样品在500~600 nm处出现TiN的等离子体共振吸收峰,该基底显示出较高的SERS活性,对R6G分子的检测极限可达~10^-7 mol·L^-1,增强因子达~10⁵。     

碳纳米管@SiO2@Ag纳米复合材料的制备及其表面增强拉曼效应

本文以SiO₂为中间层,在多壁碳纳米管(MWCNTs)表面负载Ag纳米粒子,制备出CNTs@SiO₂@Ag纳米复合材料,并采用TEM、XRD、UV-Vis、XPS等对纳米复合材料的结构、形貌和成分进行了表征,同时对该纳米复合材料的表面增强拉曼散射(Surface-enhancedRamanscattering,SERS)效应进行了研究。结果显示,Ag纳米颗粒有效提高了CNTs的SERS活性,纳米复合材料的拉曼峰强度是单纯CNTs拉曼峰强的近5倍。进一步研究了吸附罗丹明6G生物染料分子的SERS光谱,结果表明R6G分子的拉曼信号的质量与强度得到显著提高。因此,所制备的CNTs@SiO₂@Ag纳米复合材料有望作为SERS的活性基底,应用于生物无损检测领域。     

TiN纳米管的制备及其作为SERS基底的应用（英文）

采用阳极氧化法在钛片表面制备TiO_2纳米管阵列,并经氨气氮化得到TiN纳米管阵列,通过XRD、SEM、XPS、UV-Vis对基底的组成、形貌和光学性能进行了表征,并以罗丹明6G(R6G)为探针分子,对TiN基底的SERS活性进行检测。结果显示,TiO_2纳米管经800℃以上高温可转化为TiN纳米管,纳米管直径在100~200 nm,排列规整有序。氮化后的样品在500~600 nm处出现TiN的等离子体共振吸收峰,该基底显示出较高的SERS活性,对R6G分子的检测极限可达~10~(-7) mol·L~(-1),增强因子达~105。     

三维树枝状银薄膜的可控生长及其在表面增强拉曼光谱中的应用

通过电流置换反应制备了树枝状银纳米薄膜。在反应过程中通过控制反应时间和硝酸银的浓度,得到了不同形貌、分布和密度的树枝状银薄膜,从而得到了具有不同SERS性能的树枝状银纳米薄膜。选取了具有最佳SERS性能的树枝状银纳米薄膜对罗丹明6G进行了微量检测、再现性检测和稳定性检测,其检测限可达到1×10^-11 mol·L^-1,具有优良的再现性和良好的稳定性。     

Ag/ZIF-90自组装薄膜的制备及SERS活性研究

合成了金属有机框架化合物沸石咪唑框架-90(ZIF-90)溶胶和ZIF-90晶体薄膜,分别以这2种材料为基底,制备出了Ag@ZIF-90复合材料和Ag/ZIF-90自组装薄膜.通过傅里叶变换红外(FT-IR),X射线衍射(XRD),扫描电子显微镜(SEM)对产物进行表征,分析了它们的形貌和结构特征.以罗丹明6G(R 6G)作为检测分子,对所制备材料的表面增强拉曼散射(SERS)性能进行测试.结果表明制备出的Ag/ZIF-90自组装薄膜具有好的SERS性能,而ZIF-90本身的拉曼峰并不会对Ag/ZIF-90自组装薄膜的SERS检测效果产生影响.这种材料可以作为一种较好的表面增强拉曼(SERS)活性基底,在农药残留检测方面具有很好的应用前景.     

黄曲霉素B2分子吸附在银团簇的表面增强拉曼散射机理

采用密度泛函理论（DFT）B3LYP方法,6-311G（d,p）（C,H,O）/LANL2DZ（Ag）基组,计算了黄曲霉素B₂（AFB₂）分子吸附在Ag₂团簇的表面增强拉曼散射（SERS）光谱和预共振拉曼光谱,并与实验结果比较. 结果显示：AFB₂分子在基态Ag₂团簇表面吸附时,增强因子最大达到10²,对应吡喃（pyrane）环C=O伸缩振动,主要是由AFB₂分子周围化学环境改变而引起的基态静极化率改变导致的化学增强. 不同激发波长下的AFB₂分子预共振拉曼光谱的增强强度不同：电荷转移态激发波长为1144 和544 nm时拉曼信号增强了10²倍,而选择电荷转移预共振波长432和410 nm作为入射光时,其拉曼信号增强了10⁴倍,增强机理为银团簇和黄曲霉素分子之间的电荷转移共振增强. 因此通过改变入射光波长,选择电荷转移共振激发波长,更有利于强致癌物AFB₂分子的痕量检测.     

帽状银纳米粒子的制备及表面增强拉曼活性研究

采用真空热蒸发法在自组装的单层阵列二氧化硅纳米粒子表面沉积银膜制备了帽状银纳米粒子。通过透射电镜(TEM)、扫描电镜(SEM)和紫外-可见-近红外分光光度计 (UV-Vis-NIR)对其表面形貌及光学性质进行了表征。以吡啶-(2-偶氮-4)间苯二酚作为探针分子，研究了该复合纳米粒子的表面增强拉曼散射 (SERS) 活性，增强因子高达2.88×10⁶。结果表明在二氧化硅纳米粒子表面制备的帽状银纳米粒子是很好的表面增强拉曼散射活性基底。     

纳米银修饰的超疏水界面用于农药的超灵敏检测

采用化学还原法,在具有不同微观结构的规整的不锈钢网和聚纤维素酯薄膜表面合成了银纳米颗粒.利用氟化试剂对复合界面进行处理,形成超疏水性能的界面,能有效地浓缩目标分子.以罗丹明6G(R 6G)为分析物,纳米银修饰聚纤维素酯薄膜为基底,采用表面增强拉曼散射(SERS)分析了氟化处理前后基底对目标分子的检测能力.实验结果表明,具有超疏水性能的复合基底对R 6G分子的检出限为1 ×10-16 mol/L.以纳米银修饰的不锈钢网和聚纤维素酯两种复合材料为基底,对常用杀虫剂敌百虫的检出限分别为1×10-15 mol/L和1×10-16 mol/L.     

Surface‐Enhanced Raman Scattering Based on Controllable‐Layer Graphene Shells Directly Synthesized on Cu Nanoparticles for Molecular Detection

Graphene shells with a controllable number of layers were directly synthesized on Cu nanoparticles (CuNPs) by chemical vapor deposition (CVD) to fabricate a graphene‐encapsulated CuNPs (G/CuNPs) hybrid system for surface‐enhanced Raman scattering (SERS). The enhanced Raman spectra of adenosine and rhodamine 6G (R6G) showed that the G/CuNPs hybrid system can strongly suppress background fluorescence and increase signal‐to‐noise ratio. In four different types of SERS systems, the G/CuNPs hybrid system exhibits more efficient SERS than a transferred graphene/CuNPs hybrid system and pure CuNPs and graphene substrates. The minimum detectable concentrations of adenosine and R6G by the G/CuNPs hybrid system can be as low as 10^?8 and 10^?10 M , respectively. The excellent linear relationship between Raman intensity and analyte concentration can be used for molecular detection. The graphene shell can also effectively prevent surface oxidation of Cu nanoparticles after exposure to ambient air and thus endow the hybrid system with a long lifetime. This work provides a basis for the fabrication of novel SERS substrates.     

Crystallinity engineering of Au nanoparticles on graphene for in situ SERS monitoring of Fenton-like reaction

Fabrication of multifunctional nanoplatform to in situ monitor Fenton reaction is of vital importance to probe the underlying reaction process and design high-performance catalyst.Herein,a hybrid catalyst comprising of single-crystalline Au nanoparticles（SC Au NPs） on reduced graphene oxide（RGO） sheet was prepared,which not only exhibited an excellent ¹ O₂ mediated Fenton-like catalytic activity in promoting rhodamine 6 G（R6 G） degradation by activating H₂ O_...     

Designed fabrication of ordered porous au/ag nanostructured films for surface-enhanced Raman scattering substrates

This article reports the designed preparation of two different kinds of novel porous metal nanostructured films, namely, an ordered macroporous Au/Ag nanostructured film and an ordered hollow Au/Ag nanostructured film. Different from previous reports, the presently proposed method can be conveniently used to control film structures by simply varying the experimental conditions. The morphology of these films has been characterized by scanning electron microscopy (SEM), and their performance as surface-enhanced Raman scattering (SERS) substrates has been evaluated by using rhodamine 6G (R6G) as a probe molecule. We show that such porous nanostructured films consisting of larger interconnected aggregates are highly desirable as SERS substrates in terms of high Raman intensity enhancement, excellent stability, and reproducibility. The interconnected nanostructured aggregate, long-range ordering porosity, and nanoscale roughness are important factors responsible for this large SERS enhancement ability.     

SERS and FDTD simulation of gold nanoparticles grafted on germanium wafer via galvanic displacement

Uniform and dense Au nanoparticles grown on Ge (Au/Ge) were fabricated by a facile galvanic displacement method and employed as surface‐enhanced Raman scattering (SERS) substrates. The substrates exhibited excellent reproducibility in the detection of rhodamine 6G aqueous solution with a relative standard deviation of <20%. The substrate showed a high Raman enhancement factor of 3.44 × 10⁶. This superior SERS sensitivity was numerical confirmed by the three‐dimensional finite‐difference time‐domain method, which demonstrated a stronger electric field intensity (|E/E₀|²) distribution around the Au nanoparticles grown on Ge. This facile and low‐cost prepared Au/Ge substrate with high SERS sensitivity and reproducibility might have potential applications in monitoring in situ reaction in aqueous solution. Copyright © 2014 John Wiley & Sons, Ltd.     

Trace molecules detectable by surface-enhanced Raman scattering based on newly developed Ag and Au nanoparticles-containing substrates

In this work, Ag and Au nanoparticles-containing substrates were first developed for obtaining a stronger surface-enhanced Raman scattering (SERS) intensity of Rhodamine 6G (R6G) and reducing the limit of detection (LOD) of trace molecules. First, the optimum electrochemically roughening conditions employed on Ag substrates for obtaining strongest SERS of R6G were investigated. Then the optimally roughened Ag substrates were incubated in the prepared Cl- and Au-containing solutions for different couples of minutes to undergo the galvanic replacement reactions. Encouragingly, the SERS of R6G adsorbed on this roughened Ag substrate modified by the replacement of Ag with Au for 5 min exhibits a higher intensity by 8-fold of magnitude, as compared with the SERS of R6G adsorbed on an unmodified roughened Ag substrate. Moreover, the practical LOD of R6G can be reduced by one order of magnitude from 1 ppq to 0.1 ppq. Further investigations indicate that the compositions of complexes formed on the substrates demonstrate decided effects on the improved SERS.     

Highly reproducible surface-enhanced Raman scattering-active Au nanostructures prepared by simple electrodeposition: Origin of surface-enhanced Raman scattering activity and applications as electrochemical substrates

The fabrication of effective surface-enhanced Raman scattering (SERS) substrates has been the subject of intensive research because of their useful applications. In this paper, dendritic gold (Au) rod (DAR) structures prepared by simple one-step electrodeposition in a short time were examined as an effective SERS-active substrate. The SERS activity of the DAR surfaces was compared to that of other nanostructured Au surfaces with different morphologies, and its dependence on the structural variation of DAR structures was examined. These comparisonal investigations revealed that highly faceted sharp edge sites present on the DAR surfaces play a critical role in inducing a high SERS activity. The SERS enhancement factor was estimated to be greater than 10⁵, and the detection limit of rhodamine 6G at DAR surfaces was 10⁻⁸ M. The DAR surfaces exhibit excellent spot-to-spot and substrate-to-substrate SERS enhancement reproducibility, and their long-term stability is very good. It was also demonstrated that the DAR surfaces can be effectively utilized in electrochemical SERS systems, wherein a reversible SERS behavior was obtained during the cycling to cathodic potential regions. Considering the straightforward preparation of DAR substrates and the clean nature of SERS-active Au surfaces prepared in the absence of additives, we expect that DAR surfaces can be used as cost-effective SERS substrates in analytical and electrochemical applications.     

Effects of electrolytes used in roughening gold substrates by oxidation–reduction cycles on surface-enhanced Raman scattering

In this work, the effects of electrolytes used in roughening gold substrates by electrochemical methods on surface-enhanced Raman scattering (SERS) were first investigated. First, gold substrates were roughened by triangular-wave oxidation–reduction cycles (ORC) in aqueous solutions containing different kinds of 0.1 M electrolytes. Then Rhodamine 6G (R6G) was used as Raman probe to examine this effect of electrolytes used on the SERS observed. The result indicates that the highest intensity of SERS of R6G was obtained on the roughened Au substrate prepared in 0.1 M NaCl, which was less used in the literature. Meanwhile, it was also found that the rougher surface morphology observed, which is contributive to the higher SERS obtained, is corresponding to the smaller cathodic peak area shown in the cyclic voltammograms for roughening the Au substrate.     

Facile synthesis of two-dimensional PA-Ag@C film for highly sensitive SERS detection

In this study, the surface of polyamide (PA) films are electrostatically deposited with the carbon-coated silver (Ag@C) nanoparticles, resulting in a two-dimensional (2D) PA-Ag@C film substrate. The TEM images demonstrate that the nanoparticles were successful synthesized. By adjusting the pH of the system, the core–shell structure and the 2D SERS substrate work together to improve the sensitivity, stability, and repeatability of the substrate to be used in complex real-world water samples. The SERS enhancement effect and substrate uniformity were determined using rhodamine 6G (R6G), crystal violet (CV), and malachite green (MG). The results indicate that the 2D PA-Ag@C film substrate in this study has the optimal Raman effect at a system pH of 6. Under ideal pH conditions, the R6G detection limit (LOD) is as low as 10⁻¹⁰ M (D2 attenuation), and the Raman signal intensity deviation of the same substrate is maintained within 9.49%. Overall, the Raman signal of probe molecule on the fabricated PA-Ag@C film possesses excellent sensitivity, repeatability, and stability.     

Rapid Synthesis of Hollow Ag–Au Nanodendrites in 15 Seconds by Combining Galvanic Replacement and Precursor Reduction Reactions

Metallic nanomaterials displaying hollow interiors as well as sharp tips/branches at their surface (such as hollow nanodendrites) are attractive, because these features enable higher surface‐to‐volume ratios than their solid and/or rounded counterparts. This paper describes a simple strategy for the synthesis of Ag–Au nanodendrites in 15 s using Ag nanospheres prepared in a previous synthetic step as seeds. Our approach was based on the utilization of Ag nanospheres as seeds for Au deposition by a combination of galvanic replacement reaction between Ag and AuCl₄^?(aq) and AuCl₄^?(aq) reduction using hydroquinone in the presence of polyvinylpyrrolidone (PVP) as a stabilizer and water as the solvent. The produced Ag–Au nanodendrites presented monodisperse sizes, and their surface morphologies could be tuned as a function of growth time. Owing to their hollow interiors and sharp tips, the Ag–Au nanodendrites performed as effective substrates for surface‐enhanced Raman scattering (SERS) detection of 4‐MPy (4‐mercaptopyridine) and R6G (rhodamine 6G) as probe molecules. We believe that the approach described herein can serve as a protocol for the fast and one‐step synthesis of Ag–Au hollow nanondendrites with a wide range of sizes, compositions, and surface morphologies for applications in SERS and catalysis.