Cis- and trans-3-hexene: infrared spectrum in liquid argon solution, ab initio calculations of equilibrium geometry, normal coordinate analysis, and vibrational assignments

The infrared spectra of cis-3-hexene and trans-3-hexene dissolved in liquid argon have been obtained at temperatures from 93 to 120 K. The absorptions were observed with a low-temperature cell and a Fourier transform infrared spectrophotometer. Ab initio molecular orbital calculations were performed to obtain the equilibrium geometry, vibrational frequencies, force fields, and infrared intensities. The calculations were done at the Hartree-Fock level using 6-31G basis set. The Cartesian force fields from ab initio calculations have been converted to the force field in symmetry coordinates. The scale factors of ab initio calculated force fields were determined. Normal coordinate calculations were performed using a scaled quantum mechanical (SQM) force field. Vibrational normal modes calculated for the lowest energy rotamers of cis- and trans-3-hexene have been assigned to infrared absorption bands observed in liquid argon solution. The assignments were based on calculated frequencies and potential energy distributions. The equilibrium geometries of the two lowest energy rotamers (symmetry C₂ and C_s) of cis-3-hexene and of the three lowest energy rotamers (symmetry C_i, C₂, and C₁) of trans-3-hexene were calculated. Variable temperature studies of the infrared spectrum of cis- and trans-3-hexenes dissolved in liquid argon were done to obtain the ΔH of conversion between the rotamers C₂ and C_s of cis-3-hexene and between the rotamers C_i, C₂, and C₁ of trans-3-hexene.     

Y/ASA复合材料的制备及加氢裂化性能

采用原位包覆技术制备了无定形硅铝(ASA)包覆Y型分子筛的Y/ASA复合材料。分别以Y/ASA复合材料和工业Y分子筛与ASA的机械混合材料Y-ASA为载体,Ni-W为活性组分,制备了两种负载型催化剂,并考察了两种催化剂的加氢裂化性能,通过XRD、SEM、吸附吡啶的原位红外光谱和N₂吸附-脱附对载体和催化剂进行了表征。结果表明,Y/ASA载体和Ni-W/Y/ASA的总酸量较低,但强酸量和强弱酸比例均高于Y-ASA和Ni-W/Y-ASA,Y/ASA载体和Ni-W/Y/ASA催化剂拥有更大的介孔比表面积、孔容及平均孔径。正癸烷的加氢裂化反应结果表明,Ni-W/Y/ASA催化剂上正癸烷的转化率和中间组分(C_5~9)收率比Ni-W/Y-ASA催化剂分别高7.6 %和12.4 %。     

Vapor-liquid equilibria for the system water + tert.-pentanol at 4 temperatures

Precise isothermal vapor-liquid equilibrium data at 10, 30, 55 and 70°C for the system water + tert.-pentanol were measured using a computer-operated differential static apparatus. Activity coefficients at infinite dilution were derived from the experimental P − x data in the dilute region using a flexible Legendre polynomial, and the vapor-liquid-liquid locus was derived directly from the P − x data near the liquid-liquid phase boundary. Heteroazeotropic points were measured directly by distillation using a rotating band column. Furthermore the UNIQUAC and the NRTL models were used to correlate the experimental P − x data and to derive the azeotropic data.

Experimental H^E data were taken from literature and used together with the experimental P − x data to simultaneously fit temperature dependent interaction parameters for UNIQUAC and NRTL. The parameters were used to predict the azeotropic composition over a large temperature range. The results were compared with those of a simple analytical thermodynamic equation using only the pure component vapor pressure data, heats of mixing in the heterogeneous region and the azeotropic composition at one temperature.

Heats of mixing were measured at 140°C with the help of a flow calorimeter in order to determine the slope of H^E vs. x₁ in the heterogeneous region. The H^E data were used to check the reliability of the G^E model parameters and the equation to calculate the temperature dependence of the heteroazeotropic composition.     

Co3O4/Ti电催化膜电极制备及其苯甲醇催化氧化性能

本文采用浸渍涂覆法成功制备出多孔Ti负载纳米Co₃O₄电催化膜电极（Co₃O₄/Ti）,以该膜电极为阳极,辅助电极为阴极,构建电催化膜反应器（electrocatalytic membrane reactor,ECMR）用于可控催化氧化苯甲醇制备苯甲醛和苯甲酸,并考察了 Co₃O₄/Ti 膜电极结构、电化学性能以及ECMR不同操作参数对苯甲醇转化率、苯甲醛和苯甲酸选择性的影响. 结果表明,负载Co₃O₄纳米颗粒可以显著提高Ti膜电极的电化学性能和催化活性. 在常温常压下,当反应物苯甲醇浓度为10 mmol·L^-1,pH为7.0,停留时间为5.0 min,电流密度为2.5 mA·cm^-2,苯甲醇的转化率达到49.8%,苯甲醛选择性为51.5%,苯甲酸选择性为23.6%.     

Preparation of polystyrene/montmorillonite nanocomposites using a new radical initiator-montmorillonite hybrid via in situ intercalative polymerization

Polystyrene/montmorillonite (PS/MMT) nanocomposites were prepared by in situ free radical intercalative polymerization, using 1, 3 and 5 wt% of a new cationic radical initiator-MMT hybrid. The corresponding nanocomposites were designated as PS/MMT-1, PS/MMT-3 and PS/MMT-5, respectively. The silicate layers were well exfoliated and randomly dispersed in the PS/MMT-1 and PS/MMT-3, but were less exfoliated in the PS/MMT-5, due to the predominant extra-gallery polymerization over the intra-gallery polymerization. The unique properties of nanocomposites resulted from the strong interactions between the nano-sized silicate layer surfaces and the polymer chains. The onset temperature of thermal degradation, and the glass transition temperature, increased with increasing hybrid content, up to 3 wt%. The molecular weights of the PS in the PS/MMT-1 and PS/MMT-3 were less than those calculated theoretically, due to the predominant intra-gallery polymerization.     

接枝和交联对纳米Si02改性NR／PP共混型热塑弹性体的影响

动态硫化制备纳米二氧化硅（SiO2）改性天然橡胶，聚丙烯共混型热塑性弹性体（NR/PPTPE）．研究了马来酸酐，苯乙烯，过氧化二异丙苯（MAH／St／DCP）多单体“就地”熔融接枝、交联对TPE力学性能、耐溶剂性能和耐热变形性能的影响，并用SEM分析了TPE的断面形貌．结果表明：纳米SiO2和MAH／St／DCP的最佳质量分数分别为0．03和0．0375／0．0188／0．00375时，MAH／St／DCP接枝、交联改性NR／PP／纳米SiO：TPE的力学性能、耐溶剂性能和耐热变形性能最佳．MAH／St／DCP“就地”接枝、交联通过细化交联NR分散相、改善交联NR分散的均匀性和增加两相之间的共交联，使NR与PP两相界面结合强度明显提高，NR／PPTPE的综合性能得到明显的改善．     

A novel hydrogen peroxide sensor based on Ag nanoparticles electrodeposited on chitosan-graphene oxide/cysteamine-modified gold electrode

A novel strategy to fabricate a hydrogen peroxide sensor based on Ag nanoparticles electrodeposited on chitosan-graphene oxide nanocomposites/cysteamine-modified gold (Au) electrode was reported. The chitosan-graphene oxide nanocomposites were first assembled on a cysteamine-modified Au electrode to produce chitosan-graphene oxide/cysteamine/Au electrode. Then Ag nanoparticles were electrodeposited on the modified Au electrode and formed Ag nanoparticles/chitosan-graphene oxide/cysteamine/Au electrode. The chitosan-graphene oxide nanocomposites and the electrodeposited Ag nanoparticles were characterized by atomic force microscopy and scanning electron microscopy. The results showed the Ag nanoparticles were uniformly dispersed on the chitosan-graphene oxide/cysteamine/Au electrode. The cyclic voltammagrams and amperometric method were used to evaluate electrocatalytic properties of the Ag nanoparticles/chitosan-graphene oxide/cysteamine/Au electrode. The results showed that the modified electrode displayed good electrocatalytic activity to the reduction of hydrogen peroxide with a detection limit of 0.7 μM hydrogen peroxide based on a signal-to-noise ratio of 3. The sensor has good reproducibility, wide linear range, and long-term stability.     

High-performance thin-layer chromatography determination of some antimycotic imidazole derivatives and preservatives in medicinal creams and a gel

Simple and reliable thin-layer chromatography-densitometry methods for determination of antimycotics (bifonazole, clotrimazole, and miconazole) and preservatives (benzyl alcohol and benzoic acid) were developed. The pairs bifonazole/benzyl alcohol, clotrimazole/benzyl alcohol, and miconazole/benzoic acid were determined simultaneously. The following mobile phases were used: ethyl acetate-n-heptane-methanoldiethylamine (3 + 4.5 + 1 + 0.2, v/v/v/v) for bifonazole and benzyl alcohol; n-butyl acetate-n-heptane-methanol-dietylamine (3 + 4.5 + 1 + 0.2, v/v/v/v) for clotrimazole and benzyl alcohol; and n-butyl acetate-carbon tetrachloride-methanol-diethylamine (3 + 6 + 2.5 + 0.5, v/v/v/v) for miconazole and benzoic acid. The chromatographic zones on silica gel plates were scanned in the reflectance/absorbance mode at 230 nm (bifonazole, benzyl alcohol, miconazole, and benzoic acid) and 210 nm (clotrimazole and benzyl alcohol). The recovery for all substances ranged from 98.7 to 100.7%. The limits of detection and quantitation were 0.03 to 0.2 microg and 0.1 to 0.5 microg/spot, respectively. The proposed methods were applied for determination of antimycotics and preservatives in commercially available pharmaceuticals.     

Anion recognition with porphyrin-bottomed tetraurea receptors

Three tetraurea-appended porphyrin-derived anion receptors were synthesized and were found to efficiently encapsulate various anions with high association constants of up to 1.1×10⁸ L/mol.     

Gas phase chemical equilibrium in dinitrogen trioxide and dinitrogen tetroxide

The ideal gas chemical thermodynamic properties for NO, NO₂, N₂O₃, and N₂O₄ for the temperature range 50 to 5000 K were evaluated by the statistical thermodynamic method using the most recent molecular parameters. In the calculations for NO and NO₂, the effects of anharmonicity and vibration—rotation interaction were included. The contributions due to centrifugal distortion were also included for NO₂. For evaluation of the thermodynamic properties for N₂O₃ and N₂O₄ molecules, the rigid-rotor and harmonic-oscillator model were adopted. A free internal rotation was assumed for N₂O₃ and an internal rotation barrier height (V₂) of 1.58 kcal mol⁻¹ was derived for N₂O₄. The thermodynamic properties due to hindered internal rotation were clculated using a partition function formed by summation of internal rotation energy levels. The thermodynamic properties for two equilibrium mixtures: NO₂---N₂O₄ and N₂O₃---NO---NO₂---N₂O₄ were also calculated. The effects of temperature and pressure on heat capacities and compositions of these two mixtures are illustrated graphically and the calculated heat capacities and equilibrim constants are in good agreement with available experimental values.     

微波辅助萃取/气相色谱-质谱联用分析蔬菜中的有机磷农药

建立了微波辅助萃取（MAE）/气相色谱-质谱联用法（GC-MS）测定蔬菜样品中二嗪磷、水胺硫磷的分析方法，研究了不同溶剂的萃取效率。选择二氯甲烷为萃取溶剂，采用二因素三水平的正交设计实验优化了萃取溶剂体积和萃取时间。方法的线性范围分别为二嗪磷和对硫磷4ng/g-400ng/g，水胺硫磷20ng/g-400ng/g，检出限分别为二嗪磷和对硫磷4ng/g-400ng/g、水胺硫磷20ng/g-400ng/g，检出限分别为二嗪磷0.29ng/g、对硫磷1.70ng/g、水胺硫磷2.30ng/g。测定200.0ng/g和50.0ng/g加标蔬菜样品，回收率为72.2%-102.0%,RSD为1.5%-11.0%。与传统的机械振荡萃取法相比，不仅萃取效率相当，而且还具有省时省溶剂的优点。     

TiO_2载体掺杂对Mn-Ce/TiO_2催化剂低温脱硝性能影响研究

以TiO_2、TiO_2-Al_2O_3及TiO_2-SiO_2为载体,选取Mn为活性组分,Ce为活性助剂,采用分布共混法制备低温SCR催化剂,分析了TiO_2载体掺杂Al_2O_3、SiO_2改性后对Mn-Ce/TiO_2催化剂低温脱硝活性的影响,运用BET、SEM、XRD、H2-TPR以及NH_3-TPD等测试手段对催化剂进行了表征。结果表明,TiO_2载体经掺杂改性后,Mn-Ce/TiO_2催化剂的比表面积、孔结构参数以及表面孔结构形貌均得到改善和提高;Mn-Ce/TiO_2-Al_2O_3和Mn-Ce/TiO_2-SiO_2催化剂中TiO_2的结晶度均有不同程度降低;经TiO_2载体掺杂改性后的催化剂表面低温还原峰面积及催化剂表面酸性位种类及酸性大小显著改善,这都有助于提高催化剂的脱硝活性。通过对TiO_2载体掺杂SiO_2和Al_2O_3改性后,催化剂的脱硝活性明显提高,反应温度在80-140℃时,催化剂SCR脱硝活性的顺序是:Mn-Ce/TiO_2-SiO_2M n-Ce/TiO_2-Al_2O_3M n-Ce/TiO_2。     

接枝和交联对纳米SiO_2改性NR/PP共混型热塑弹性体的影响

动态硫化制备纳米二氧化硅(SiO2)改性天然橡胶/聚丙烯共混型热塑性弹性体(NR/PP TPE).研究了马来酸酐/苯乙烯/过氧化二异丙苯(MAH/St/DCP)多单体“就地”熔融接枝、交联对TPE力学性能、耐溶剂性能和耐热变形性能的影响,并用SEM分析了TPE的断面形貌.结果表明:纳米SiO2和MAH/St/DCP的最佳质量分数分别为0.03和0.0375/0.0188/0.00375时,MAH/St/DCP接枝、交联改性NR/PP/纳米SiO2TPE的力学性能、耐溶剂性能和耐热变形性能最佳.MAH/St/DCP“就地”接枝、交联通过细化交联NR分散相、改善交联NR分散的均匀性和增加两相之间的共交联,使NR与PP两相界面结合强度明显提高,NR/PP TPE的综合性能得到明显的改善.     

亚胺连接的多孔共价有机骨架材料结合固相萃取-液相色谱-串联质谱检测蜂蜜中雌激素

以亚胺连接的多孔共价有机骨架材料(IL-COF-1)作为固相萃取的吸附剂,建立了液相色谱-串联质谱快速检测蜂蜜样品中痕量雌激素的方法。该研究选择雌二醇、己烯雌酚、雌三醇、β-雌二醇和炔雌醇5种雌激素作为目标分析物。在蜂蜜样品中添加雌激素,采用单因素优化法对影响萃取效果的重要因素进行优化,获得最佳条件:IL-COF-1用量为30 mg,样品流速为3 mL/min,样品溶液pH值为7,以5 mL的1%(v/v)氨水-甲醇溶液进行洗脱,流速为0.4 mL/min,萃取过程中不添加NaCl。采用高效液相色谱-三重四极杆质谱联用技术对提取物中的雌激素进行定量分析。以乙腈和5 mmol/L的乙酸铵溶液作为流动相进行梯度洗脱,经C18色谱柱分离,采用电喷雾离子源、质谱多反应监测和负离子扫描模式,实现了蜂蜜样品中5种雌激素的快速定性定量分析。在最佳条件下,方法验证结果中雌三醇、β-雌二醇和炔雌醇的线性范围为1~500 ng/g,雌二醇和己烯雌酚的线性范围为0.1~100 ng/g,相关系数(r)为0.9934~0.9972。检出限(S/N=3)为0.01~0.30 ng/g,定量限(S/N=10)为0.05~0.95 ng/g。添加50 ng/g 5种雌激素进行重复性实验,日内精密度相对标准偏差(RSD)为3.2%~6.6%,日间精密度RSD为4.2%~7.9%。基于IL-COF-1的固相萃取-液相色谱-串联质谱法具有快速准确、灵敏度高等特点,适用于蜂蜜中雌激素的分析和检测。将该方法应用于4个实际蜂蜜样品中雌激素的检测,均未检出目标物;在低中高3个水平下,5种雌激素的加标回收率为80.1%~115.2%,结果令人满意。     

-电感耦合等离子体质谱法测定硅锰冶炼渣中8种金属元素

实验采用HCl-HNO₃-HF-HClO₄混合酸为消解体系对样品进行前处理,加入1.0 mL盐酸羟胺溶液(100 g/L)溶解残渣,选择合适的同位素,以¹⁰³Rh为内标测定Cr、Co、Ni、Cu、Zn和Cd,以¹⁹³Ir为内标测定Tl和Pb,建立了电感耦合等离子体质谱(ICP-MS)法测定硅锰冶炼渣中8种重金属元素的方法。实验发现,样品前处理选择HCl∶HNO₃∶HF∶HClO₄=5∶5∶5∶1,并在复溶阶段加入1.0 mL盐酸羟胺溶液(100 g/L)可以完全消解样品,实验采用KED模式和干扰系数校正法消除质谱干扰,样品中待测元素的测定结果不受基体成分的干扰。通过绘制校准曲线及测定流程空白,各元素校准曲线的相关系数均大于0.9999,方法检出限为0.006~0.19 mg/kg,方法定量限为0.018~0.57 mg/kg。对硅锰渣实际样品进行测定,各元素的相对标准偏差(RSD,n=11)在0.83%~4.1%,加标回收率为94.7%~106%;经过人员比对实验,相对偏差为-4.54%~4.24%。测定结果稳定可靠,能满足硅锰冶炼渣中8种微量金属元素含量的分析检测要求。     

Phase Behavior of Bicontinuous and Water/Diesel Fuel Microemulsions Using Nonionic Surfactants Combined with Hydrophilic Alcohol Ethoxylates

Bicontinuous and water-in-diesel microemulsions were formulated using single nonionic alkyl poly glycol ethers combined with hydrophilic alcohol ethoxylates. The phase behavior at temperatures ranging from 0°C to 50°C was investigated. Visual inspection as well as cross-polarizers were used to detect anisotropy. The fish phase diagrams were determined. The presence of the hydrophilic alcohol ethoxylates was necessary to initiate both types of microemulsions. Increasing the hydrophobic chain length of the surfactant led to a wider range of temperature stability at lower surfactant concentration. Meanwhile, increasing the ethylene oxide units in the headgroup by two units led to a phase diagram that is dominated by lyotropic liquid crystal. The formulated water in diesel microemulsions were tested experimentally in a 4-cylinder diesel engine. From this it is observed that the emissions of NO_x, soot, and CO₂ were reduced substantially compared to neat diesel, while for the CO the reduction occurs just at low load.      

正相高效液相色谱法测定食物中8种维生素E异构体及维生素A

建立了正相高效液相色谱测定食物中8种维生素E异构体及维生素A的方法。样品中的维生素E异构体和维生素A经皂化和液液萃取,Waters ACQUITY^TM UPLC BEH Amide色谱柱(150 mm×3.0 mm, 1.7 μm)分离,体积比为90 : 10的正己烷与叔丁基甲基醚-四氢呋喃-甲醇(20:10:1, v/v/v)为流动相,荧光检测器和紫外检测器串联检测。4种生育酚在5.0~60.0 mg/L(r²≥0.9999)、维生素A和4种三烯生育酚在0.5~6.0 mg/L(r²≥0.9996)范围内具有良好的线性,各基质中目标物的检出限在20~60 μg/kg之间;9个组分在各基质中的加标回收率为79.2%~114.2%,相对标准偏差(RSD)为1%~12%。该方法简便、灵敏、可靠、环保,可用于食物中8种维生素E异构体以及维生素A含量的同时测定。     

Impact tensile fracture testing of a brittle polymer

The fracture behavior of a brittle polymer, methylmethacrylate–butadiene–styrene resin, under impact tensile loading was studied using single-edge-cracked specimens. The dynamic load and displacement were measured with a Piezo sensor and a high-speed extensometer, respectively. The load and displacement diagram, i.e., the external work, U_ex, applied to the specimen was used to determine the elastic energy, E_e, and non-elastic energy, E_n, due to viscoelastic and plastic deformation, and the fracture energy, E_f, for creating new fracture surface, A_s. The energy-release rates were then estimated using G_t=U_ex/A_s and G_f=E_f/A_s. The values of G_t and G_f were correlated with the fracture loads and the mean crack velocities determined from the load and time relationships.     

含喹喔啉杨梅素衍生物的合成及生物活性

利用活性拼接原理, 将喹喔啉引入到杨梅素结构中, 合成了一系列含喹喔啉基团的杨梅素新型衍生物. 采用浊度法测试了目标化合物的体外抑菌活性, 结果表明, 目标化合物对柑橘溃疡病菌(X. Citri)和水稻白叶枯病菌(X. Oryzae)均表现出较好的抑制活性. 目标化合物对柑橘溃疡病菌的抑制活性(EC₅₀)均优于对照药叶枯唑和噻菌铜(EC₅₀分别为54.85和61.13 μg/mL), 其中化合物4o抑制活性(EC₅₀=11.17 μg/mL)最优; 目标化合物对水稻白叶枯病菌的抑制活性EC₅₀均优于对照药叶枯唑和噻菌铜(EC₅₀分别为148.20和175.47 μg/mL), 其中化合物4f抑制活性(EC₅₀=34.49 μg/mL)最优. 采用半叶枯斑法测试了目标化合物的抗烟草花叶病毒(TMV)活性, 结果表明, 所有目标化合物在浓度为500 mg/L时均有一定的抑制作用.     

QuEChERS-超高效液相色谱-串联质谱法同时测定畜禽组织中6种黄曲霉毒素和杂色曲霉素

建立了QuEChERS前处理技术结合超高效液相色谱-串联质谱（UHPLC-MS/MS）检测畜禽组织中6种黄曲霉毒素和杂色曲霉素残留的分析方法。样品经20 μL β-葡萄糖苷酶酶解和10 mL乙腈-水（84：16,v/v）提取,然后用1.0 g氯化钠和1.0 g无水硫酸镁净化、5 mL正己烷脱脂,最后采用1 mL含5 mmol/L乙酸铵的乙腈-水溶液（80：20,v/v）复溶。以甲醇和5 mmol/L乙酸铵为流动相,在多反应监测正离子模式下进行检测,采用基质匹配标准曲线外标法进行定量分析。结果显示,6种黄曲霉毒素和杂色曲霉素在各自的范围内线性关系良好,相关系数（R²）>0.99,检出限（LOD,S/N=3）为0.007~0.30 μg/kg,定量限（LOQ,S/N=10）为0.02~0.91 μg/kg,加标回收率为77.3%~118.5%（n=6）。该法简单、快速,灵敏度高,适用于不同畜禽产品中6种黄曲霉毒素和杂色曲霉素的确证分析。