Selective membranes with biologically active surface

Composite membranes have been developed for media where accumulation of pathogenic microorganisms on the membrane surface is possible. It has been proposed to use as membrane skin layer a polymer nanocomposite modified with detonation nanodiamonds containing surface-bound dibutyltin dilaurate as biologically active substance, which should ensure self-cleaning of the membrane surface.     

Preparation of hydrophilic poly(vinylidene fluoride) membrane by in-situ grafting of N-vinyl pyrrolidone via a reactive vapor induced phase separation procedure

Increasing hydrophilicity of hydrophobic membrane is one of the strategies to improve its antifouling performance. Herein we report a procedure of reactive-vapor induced phase separation to prepare an N-vinyl pyrrolidone (NVP) modified poly(vinylidene fluoride) (PVDF) membrane to improve its hydrophilicity. PVDF solution containing NVP monomer was cast in ammonia water vapor atmosphere to prepare the modified membrane. During the process, PVDF was dehydrofluorinated by the reactive vapor of ammonia water to generate double bond of FC═CH, and then NVP was grafted. The degree of grafting modification and the microstructure evolution of the membrane were studied by adjusting the amount of NVP addition. A possible mechanism of membrane formation from crystallization gelling to non-crystallization gelling has been proposed to understand the morphology change from nodular sphere to bi-continuous microstructure with fibril matrix. It has been found that rising the degree of modification has changed the polymorph of PVDF from β to α crystalline phase, as well as turned the hydrophobic PVDF membrane into hydrophilic. Moreover, the modified membrane displayed obvious reduction in bovine serum albumin adsorption, suggesting improvement in anti-fouling performance. Therefore, our work provides an easy strategy to prepare hydrophilic PVDF membrane, which may have promising potential applications.     

Drop size prediction in liquid membrane systems

The design of separation equipment using liquid membranes requires predictive methods for the estimation of drop diameters of the dispersed liquid membrane “macrodrop”. Existing models for drop breakage in liquid-liquid systems underpredict drop diameters of liquid membrane macrodrops even after incorporating the effects of dispersed phase viscosity and hold-up. By considering that the microdroplets within a liquid membrane macrodrop cause a damping of induced drop oscillations arising from external turbulence, the recently proposed model of Calabrese et al. (1986) has been modified and the resulting model equations have been shown to predict drop diameters of both oil as well as water liquid membrane macrodrops reasonably well.     

Synthesis and modeling of composite poly (styrene-co-acrylonitrile) membrane for the separation of chromic acid

In this work, we have prepared a composite styrene acrylonitrile (SAN) membrane on a ceramic clay plate by coating a prepolymer solution prepared using a dual initiator system. This membrane is chemically modified by gas phase nitration followed by amination and quaternization to make it charged and has been characterized by FTIR, SEM, contact angle measurements, AFM, water content, water permeability measurements and molecular weight cut-off experiments. The membrane has been further characterized using chromic acid rejection (real and observed) at different pressures, feed concentrations and pH. The modified membrane is found to possess a real rejection of above 90% with high water flux at low pressure drop.     

甲苯二异氰酸酯改性醋酸纤维素膜材料

本文研究了用甲苯二异氰酸酯对醋酸纤维素进行改性,以增强高聚物的物理性能和耐菌性能。探讨了反应时间、原料配比、反应温度、催化剂用量及产物分离用的溶剂等因素对合成高聚物材料的影响。对交联后的醋酸纤维素苯基氨基甲酸酯铸成的反渗透膜的水通量、脱盐率、耐水解性和耐微生物的稳定性能的测试表明,经改性的醋酸纤维素膜具有较好的上述性能,是一种良好的膜材料。     

Determination of the surface potential for hollow-fiber membranes by the streaming-potential method

A procedure has been proposed for measuring the surface potential of hollow-fiber membranes by the streaming-potential method under the conditions of a tangential flow of a solution. The zeta-potential and surface charge of nanofiltration hollow-fiber polyacrylonitrile membranes have been measured. The measurements have been performed for membranes with different porosities, which were obtained by partial drying of initial humid membranes. The porosity has been determined from the electrical conductivity of a membrane. An equation has been proposed for calculating the charge transfer by a solution flow in a porous layer. It has been shown that the use of the proposed equation makes it possible to obtain more correct values of the membrane surface potential.     

分子筛改性气—液毛细管柱及其性能考察

以原位合成法制备的分子筛膜对玻璃毛细管内壁进行改性后，成功地制备了常规口径及大口径分配ＳＣＯＴ柱，并对毛细管柱的性能进行了评价。     

表面修饰乙烯－乙烯醇共聚物膜的“原地”聚离子复合化及其若干性能

表面修饰乙烯－乙烯醇共聚物膜的“原地”聚离子复合化及其若干性能张军，王大力，刘新三（天津市合成材料研究所，天津，３００２２０）李福绵（北京大学化学系，北京，１００８７１）关键词聚离子复合物，“原地”聚离子复合，磷酸酯化，乙烯－乙烯醇共聚物膜聚离子复合...     

表面修饰乙烯－乙烯醇共聚物膜的“原地”聚离子复合化及其若干性能

he ethylene-vinyl alcohol copolymer membrane with polyionically complexationalized layer has been prepared by in situ polyionic complexation from cationically modified surface of EVAL membrane and phosphorylated EVAL aqueous solution, which can be considered as a feasible route to modify the surface of membrane for improving the properties , and which is a way to avoid the using of shielding solvent for the processing of polygonic complexes. The condition for the phosphorylation of EVAL has been studied. The effect of the chemical composition of the polyionic complex membrane on the contact angle, water con-tent,mechanical and thermal properties,as well as blood compatibility have been investigated.     

聚苯胺膜修饰电极对儿茶酚及对苯二酚的催化氧化

研究了电化学条件下聚合生成的聚苯胺膜对儿茶酚及对苯二酚的催化氧化。实验分析了影响电催化的几个因素：聚合电位、膜厚、溶液酸度及底物浓度，同时分析和比较了聚苯胺膜对两种不同多酚类化合物的催化反应。提出电化学测试分析多酚类化合物的可能性。     

Modeling of the permeate flux decline during MF and UF cross-flow filtration of soy sauce lees

Cross-flow ultrafiltration and microfiltration have been used to recover refined soy sauce from soy sauce lees for over 25 years. The precise mechanism which dominated the permeate flux during batch cross-flow filtration has not been clarified. In the present study, we proposed a modified analytical method incorporated with the concept of deadend filtration to determine the initial flux of cross-flow filtration and carried out the permeate recycle and batch cross-flow filtration experiments using soy sauce lees. We used UF and MF flat membrane (0.006 m² polysulfone) module under different transmembrane pressures (TMP) and cross-flow velocities. The modified analysis provided an accurate prediction of permeate flux during the filtration of soy sauce lees, because this model can consider the change in J₀ at initial stage of filtration which was caused by the pore constriction and plugging inside membrane, and these changes may not proceed when the cake was formed on the membrane surface. Mean specific resistance of the cake increased with TMP due to the compaction of the cake and decreased with cross-flow velocity due to the change of deposited particle size, but less depended on the membrane in the present study. These results indicate that the value of J₀ determined by modified method was relevant to exclude the effects of the initial membrane fouling by pore constriction due to protein adsorption and plugging with small particles. The modified analytical method for the cake filtration developed in the present study was considered to be capable of selecting an appropriate operating conditions for many cross-flow filtration systems with UF, MF membranes.     

Immobilization of silver nanoparticles obtained by electric discharge method on a track membrane surface

Composite poly(ethylene terephthalate) track membranes containing immobilized silver nanoparticles with the aim of using them for surface-enhanced Raman scattering spectroscopy have been obtained and studied. A dispersion of negatively charged silver nanoparticles has been synthesizes by the method of pulsed electrical discharge between silver electrodes immersed in distilled water. To ensure the electrostatic deposition of nanoparticles onto the track membrane surface, it has been modified with polyethyleneimine. The composition and morphology of the surface of the obtained composite membranes have been studied by X-ray photoelectron spectroscopy and scanning electron microscopy. Aggregation of nanoparticles on the surface has been analyzed. The coefficient of Raman-scattering enhancement has been determined by the example of rhodamine 6G molecules adsorbed on a membrane with immobilized silver nanoparticles.     

Electro-adsorption of polyethyleneimine on the anion exchange membrane: Application to the nitrate removal from loaded solutions

Anion exchange membrane has been modified by fixation of polyethyleneimine. The modification has been carried out aiming to achieve a separation of anions according to their hydration radii and their sizes. The performances of the modified membranes were compared with the unmodified one by applying Donnan dialysis of nitrate ion using Cl⁻ in the strip compartment. The transfer of nitrate ions in the presence of chloride was enhanced by using immersion modified membrane. The presence of a thin layer of PEI on the strip side of the membrane improves Cl⁻ transference, by creating a chemical potential difference which increases the transfer.     

Fabrication and biocompatibility of cell outer membrane mimetic surfaces

The surface design used for improving biocompatibility is one of the most important issues for the fabrication of medical devices.For mimicking the ideal surface structure of cell outer membrane,a large number of polymers bearing phosphorylcholine(PC) groups have been employed to modify the surfaces of biomaterials and medical devices.It has been demonstrated that the biocompatibility of the modified materials whose surface is required to interact with a living organism has been obviously improved by introducing PC groups.In this review,the fabrication strategies of cell outer membrane mimetic surfaces and their resulted biocompatibilities were summarized.     

H-ras protein in a bilayer: interaction and structure perturbation

Ras GTPases become functionally active when anchored to membranes by inserting their lipid modified side chains. Their role in cell division, development, and cancer has made them targets of extensive research efforts, yet the mechanism of membrane insertion and the structure of the resulting complex remain elusive. Recently, the structure of the full-length H-ras protein in a DMPC bilayer has been computationally characterized. Here, the atomic interactions between the H-ras membrane anchor and the DMPC bilayer are investigated in detail. We find that the palmitoylated cysteines and Met182 have dual contributions to membrane affinity: hydrogen bonding by their amides and van der Waals interaction by their hydrophobic side chains. The polar side chains help maintain the orientation of the anchor. Although the overall structure of the bilayer is similar to that of a pure DMPC, there are localized perturbations. These perturbations depend on the insertion depth and backbone localization of the anchor, which in turn is modulated by the catalytic domain and the linker. The pattern of anchor amide-DMPC phosphate/carbonyl hydrogen bonds and the flexibility of Palm184 are important in discriminating between different modes of ras-DMPC interactions. The results provide structural arguments in support of the proposed participation of ras in the organization of membrane nanoclusters.     

Ion transport in MF-4SK cation-exchange membranes modified with acid zirconium phosphate

An MF-4SK cation-exchange membrane has been modified to obtain composite materials containing acid zirconium phosphate particles. It is demonstrated by electron microscopy and X-ray diffraction that acid zirconium phosphate in the resulting membrane is in the crystalline state. As compared to the initial MF-4SK membrane, the modified membrane shows a somewhat lower diffusion permeability and a higher ion selectivity.     

Investigation of poly(vinylidene chloride) distribution in perfluorinated cation-exchange membranes MF-4SK upon UV- and γ-initiated graft polymerization

A new process for grafting poly(vinylidene chloride) (PVDC) to the membrane material MF-4SK by UV-initiated graft polymerization of the monomer from the gas phase has been developed. Modified membranes containing up to 20 wt % of UV-grafted PVDC have been obtained. Microphotographs of thin sections of the modified membranes have been investigated. It has been shown that the pretreatment of the membranes and variation of UV- or γ-grafting conditions make it possible to achieve an uniform distribution of grafted PVDC both along the thickness of the membrane and in a thin surface layer. The values of the parameters determining the character of the distribution have been estimated. Numerical simulation of the UV- and γ-initiated graft polymerization of VDC gave solutions for the grafted-PVDC distribution fitting with the experimental data.     

Modification of membrane surface for anti-biofouling performance: Effect of anti-adhesion and anti-bacteria approaches

Membrane biofouling refers to the undesirable accumulation (attachment and growth) of microorganisms on a membrane surface, and has been a major problem in the application of membrane technology in water and wastewater treatment. In this study, the surface of a base membrane made of chitosan/cellulose acetate blend was modified by reacting with heparin, quaternary ammonium or being immobilized with silver ions. The purpose of the modifications was to increase the surface hydrophilicity, alter the surface charge property or endue the surface with anti-bacteria function. The modified membranes were then examined for their anti-biofouling performance in terms of the anti-adhesion and anti-bacteria effects, with Escherichia coli pure culture and mixed culture bacteria in a bioreactor that simulated the activated sludge wastewater treatment process. The results clearly show that the hydrophilicity of a membrane, although important, is not an effective indicator for the tendency of membrane biofouling but the nature of the surface charges of the membrane also plays a very important role. It was found that the anti-adhesion approach that prevents the initial attachment of bacteria on a membrane surface is a more effective method than the anti-bacteria approach that aims at killing bacteria already attached on the membrane surface. The best performance for minimizing membrane biofouling has, however, been realized through a modified membrane surface that has effective anti-adhesion property plus additional anti-bacteria function, with the latter as a safe guard in case some bacteria do attach to the surface of a membrane.     

Improvement of pore geometry and performances of poly(ethylene terephthalate) track membranes by a protective layer method using plasma-induced graft polymerization of 1H,1H,2H-perfluoro-1-octene monomer

The process of geometrical modification of pores in poly(ethylene terephthalate) track-etched membranes (TM) by use of plasma deposition of a fluorine-containing polymer protective layer on one membrane surface and alkali etching of the other surface has been studied in order to produce membranes with improved performance characteristics. Samples of membranes with conical pores have been obtained which have better filtration efficiency compared with initial TM with cylindric pores. Plasma polymerization of 1H,1H,2H-perfluoro-1-octene at the membrane surface was used to produce the protective layer resistant to alkali solutions. The occurrence of plasma modification and changing of pore geometry have been verified by X-ray photoelectron spectroscopy and scanning electron microscopy studies. The filtration efficiency and selectivity of the modified membranes have been studied.     

Application of charged membranes in water softening: modeling and experiments in the presence of polyelectrolytes

In this paper theoretical and experimental results for water softening by bipolar membranes in the presence of polyelectrolytes have been presented. A modified capillary model is introduced for flow of a multiion solution through the membrane. The most important modifications are: an integral boundary condition in Poisson equation and a coupling coefficient in the convective molar flux by using the modified Faxen equation. In addition, electrical permittivity of solution has not been considered as a constant. The predictions of the model were compared well with the experimental data obtained by using bipolar membranes in a recirculating test system in the presence of polyelectrolytes.