Stoichiometric and catalytic reactivity of the N-heterocyclic carbene ruthenium hydride complexes [Ru(NHC)(L)(CO)HCl] and [Ru(NHC)(L)(CO)H(eta2-BH4)] (L=NHC, PPh3)

Thermolysis of [Ru(AsPh3)3(CO)H2] with the N-aryl heterocyclic carbenes (NHCs) IMes (1,3-bis(2,4,6-trimethylphenyl)imidazol-2-ylidene), IPr (1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene) or the adduct SIPr.(C6F5)H (SIPr=1,3-bis(2,6-diisopropylphenyl)-4,5-dihydroimidazol-2-ylidene), followed by addition of CH2Cl2, affords the coordinatively unsaturated ruthenium hydride chloride complexes [Ru(NHC)2(CO)HCl] (NHC=IMes , IPr , SIPr ). These react with CO at room temperature to yield the corresponding 18-electron dicarbonyl complexes . Reduction of and [Ru(IMes)(PPh3)(CO)HCl] () with NaBH4 yields the isolable borohydride complexes [Ru(NHC)(L)(CO)H(eta2-BH4)] (, L=NHC, PPh3). Both the bis-IMes complex and the IMes-PPh3 species react with CO at low temperature to give the eta1-borohydride species [Ru(IMes)(L)(CO)2H(eta1-BH4)] (L=IMes , PPh3), which can be spectroscopically characterised. Upon warming to room temperature, further reaction with CO takes place to afford initially [Ru(IMes)(L)(CO)2H2] (L=IMes, L=PPh3) and, ultimately, [Ru(IMes)(L)(CO)3] (L=IMes , L=PPh3). Both and lose BH3 on addition of PMe2Ph to give [Ru(IMes)(L)(L')(CO)H2](L=L'=PMe2Ph; L=PPh3, L'=PMe2Ph). Compounds and have been tested as catalysts for the hydrogenation of aromatic ketones in the presence of (i)PrOH and H2. For the reduction of acetophenone, catalytic activity varies with the NHC present, decreasing in the order IPr>IMes>SIMes.     

Novel tailoring reaction for two adjacent coordinated nitriles giving platinum 1,3,5-triazapentadiene complexes

The tailoring reaction of the two adjacent nitrile ligands in cis-[PtCl(2)(RCN)(2)] (R = Me, Et, CH(2)Ph, Ph) and [Pt(tmeda)(EtCN)(2)][SO(3)CF(3)](2) (8.(OTf)(2); tmeda = N,N,N',N'-tetramethylethylenediamine) upon their interplay with N,N'-diphenylguanidine (DPG; NH=C(NHPh)(2)), in a 1:2 molar ratio gives the 1,3,5-triazapentadiene complexes [PtCl(2){NHC(R)NHC(R)=NH}] (1-4) and [Pt(tmeda){NHC(Et)NHC(Et)NH}][SO(3)CF(3)](2) (10.(OTf)(2)), respectively. In contrast to the reaction of 8.(OTf)(2) with NH=C(NHPh)(2), interaction of 8.(OTf)(2) with excess gaseous NH(3) leads to formation of the platinum(II) bis(amidine) complex cis-[Pt(tmeda){NH=C(NH(2))Et}(2)][SO(3)CF(3)](2) (9.(OTf)(2)). Treatment of trans-[PtCl(2)(RCN)(2)] (R = Et, CH(2)Ph, Ph) with 2 equiv of NH=C(NHPh)(2) in EtCN (R = Et) and CH(2)Cl(2) (R = CH(2)Ph, Ph) solutions at 20-25 degrees C leads to [PtCl{NH=C(R)NC(NHPh)=NPh}(RCN)] (11-13). When any of the trans-[PtCl(2)(RCN)(2)] (R = Et, CH(2)Ph, Ph) complexes reacts in the corresponding nitrile RCN with 4 equiv of DPG at prolonged reaction time (75 degrees C, 1-2 days), complexes containing two bidentate 1,3,5-triazapentadiene ligands, i.e. [Pt{NH=C(R)NC(NHPh)=NPh}(2)] (14-16), are formed. Complexes 14-16 exhibit strong phosphorescence in the solid state, with quantum yields (peak wavelengths) of 0.39 (530 nm), 0.61 (460 nm), and 0.74 (530 nm), respectively. The formulation of the obtained complexes was supported by satisfactory C, H, and N elemental analyses, in agreement with FAB-MS, ESI-MS, IR, and (1)H and (13)C{(1)H} NMR spectra. The structures of 1, 2, 4, 11, 13, 14, 9.(picrate)(2), and 10.(picrate)(2) were determined by single-crystal X-ray diffraction.     

Syntheses, reactions, and ethylene polymerization of titanium complexes with [N,N,S] ligands

Tridentate dianionic arylsulfide free ligands [ArNHCH(2)C(6)H(4)NHC(6)H(4)-2-SPh] (Ar = Ph (3a); Ar = 2,4,6-trimethylphenyl (3b); Ar = 2,6-diisopropylphenyl (3c)) have been prepared by reduction of the corresponding imine compounds [ArN[double bond, length as m-dash]CHC(6)H(4)NHC(6)H(4)-2-SPh] (Ar = Ph (2a); Ar = 2,4,6-trimethylphenyl (2b); Ar = 2,6-diisopropylphenyl (2c)) with LiAlH(4) in high yields. Reactions of TiCl(4) with the tridentate dianionic arylsulfide free ligands (3a-3c) afford five-coordinate and four-coordinate titanium complexes [κS, κ(2)N-(ArNHCH(2)C(6)H(4)NHC(6)H(4)-2-SPh)TiCl(2)] (Ar = Ph (4a); Ar = 2,4,6-trimethylphenyl (4b)] and [κ(2)N-(ArNHCH(2)C(6)H(4)NHC(6)H(4)-2-SPh)TiCl(2)] (Ar = 2,6-diisopropylphenyl (4c)], respectively. The molecular structures of compounds 2b, 2c, 3b and 3c·HCl have been characterized by single crystal X-ray diffraction analyses. Complexes 2a-4c are characterized by IR,(1)H-NMR spectra, and elemental analysis. EXAFS spectroscopy performed on complexes 4b and 4c reveals the expected different coordination geometry due to steric hindrance effect. When activated by excess methylaluminoxane (MAO), 4a-4c can be used as catalysts for ethylene polymerization and exhibit moderate to good activities.     

Dimethylaluminium iminophosphoranylenamides and iminophosphoranylanilides: synthesis, characterisation, and their controlled ring-opening polymerisation of ε-caprolactone

A series of aluminium iminophosphoranylenamide complexes, [Me(2)Al{N(Ar)C(Ph)=CHP(Ph(2))=N-Ar(1)}] (Ar = Ph, Ar(1) = p-MeC(6)H(4) (9); Ar = Ph, Ar(1) = o-ClC(6)H(4) (10); Ar = Ph, Ar(1) = o-FC(6)H(4) (11); Ar = p-MeC(6)H(4), Ar(1) = o-FC(6)H(4) (12)), were synthesised by the reactions of ArN=C(Ph)CH(2)P(Ph(2))=NAr(1) (5-8) with AlMe(3) in toluene. Similar reactions between o-{ArN=P(Ph(2))}C(6)H(4)NHC(Ph)=CHP(Ph(2))=NAr (Ar = p-MeC(6)H(4), 13), and AlMe(3) in toluene generates aluminium iminophosphoranylanilide, 14. All new compounds were characterised by NMR spectroscopy and elemental analysis. The molecular structures of complexes 9 and 14 were further characterised by single-crystal X-ray structure determination. In the presence of benzyl alcohol (BnOH) each of the complexes is catalytically active for the ring-opening polymerisation (ROP) of ε-caprolactone (ε-CL), and complex 14 has the highest activity among them.     

Cyclometalated iridium(III) diimine bis(biotin) complexes as the first luminescent biotin-based cross-linkers for avidin

Four luminescent cyclometalated iridium(III) diimine complexes [Ir(N-C)2(N-N)](PF6) (HN-C = 2-(4-(N-((2-biotinamido)ethyl)aminomethyl)phenyl)pyridine, Hppy-4-CH2NHC2NH-biotin, N-N = 3,4,7,8-tetramethyl-1,10-phenanthroline, Me4-phen (1a); N-N = 4,7-diphenyl-1,10-phenanthroline, Ph2-phen (2a); HN-C = 2-(4-(N-((6-biotinamido)hexyl)aminomethyl)phenyl)pyridine, Hppy-4-CH2NHC6NH-biotin, N-N = Me4-phen (1b); N-N = Ph2-phen (2b)), each containing two biotin units, have been synthesized and characterized. The photophysical and electrochemical properties of these complexes have been investigated. Photoexcitation of these iridium(III) diimine bis(biotin) complexes in fluid solutions at 298 K and in alcohol glass at 77 K resulted in intense and long-lived luminescence. The emission is assigned to a triplet metal-to-ligand charge-transfer (3MLCT) (d pi(Ir) --> pi*(N-N)) excited state. The emissive states of complexes 1a,b are probably mixed with some 3IL (pi --> pi*) (Me4-phen) character. The interactions of these iridium(III) diimine bis(biotin) complexes with avidin have been studied by 4'-hydroxyazobenzene-2-carboxylic acid (HABA) assays and emission titrations. The potential for these complexes to act as cross-linkers for avidin has been examined by resonance-energy transfer- (RET-) based emission quenching experiments, microscopy studies using avidin-conjugated microspheres, and HPLC analysis.     

Reversible N-Heterocyclic Carbene-Induced α-H Abstraction in Tungsten(VI) Imido Dialkyl Dialkoxide Complexes

The first reversible N-heterocyclic carbene (NHC) induced α-H abstraction in tungsten(VI) imido-dialkyl dialkoxide complexes is reported. Treatment of W(NAr)(CH₂Ph)₂(OtBu)₂ (Ar=2,6-dichlorophenyl, 2,6-dimethylphenyl, 2,6-diisopropylphenyl) with different NHCs leads to the formation of complexes of the type W(NAr)(CHPh)(NHC)(CH₂Ph)(OtBu) in excellent isolated yields of up to 96 %. The highly unusual release of the tert-butoxide ligand as tBuOH in the course of the reaction was observed. The formed alkylidene complexes and tBuOH are in an equilibrium with the NHC and the dialkyl complexes. Reaction kinetics were monitored by ¹H NMR spectroscopy. A correlation between the steric and electronic properties of the NHC and the reaction rates was observed. Kinetics of a deuterium-labeled complex in comparison to its non-deuterated counterpart revealed the presence of a strong primary kinetic isotope effect (KIE) of 4.2, indicating that α-H abstraction is the rate-determining step (RDS) of the reaction.     

Chemistry surrounding monomeric copper(I) methyl, phenyl, anilido, ethoxide, and phenoxide complexes supported by N-heterocyclic carbene ligands: reactivity consistent with both early and late transition metal systems

Monomeric copper(I) alkyl complexes that possess the N-heterocyclic carbene (NHC) ligands IPr, SIPr, and IMes [IPr = 1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene, SIPr = 1,3-bis(2,6-diisopropylphenyl)imidazolin-2-ylidene, IMes = 1,3-bis(2,4,6-trimethylphenyl)imidazol-2-ylidene] react with amines or alcohols to release alkane and form the corresponding monomeric copper(I) amido, alkoxide, or aryloxide complexes. Thermal decomposition reactions of (NHC)Cu(I) methyl complexes at temperatures between 100 and 130 degrees C produce methane, ethane, and ethylene. The reactions of (NHC)Cu(NHPh) complexes with bromoethane reveal increasing nucleophilic reactivity at the anilido ligand in the order (SIPr)Cu(NHPh) < (IPr)Cu(NHPh) < (IMes)Cu(NHPh) < (dtbpe)Cu(NHPh) [dtbpe = 1,2-bis(di-tert-butylphosphino)ethane]. DFT calculations suggest that the HOMO for the series of Cu anilido complexes is localized primarily on the amido nitrogen with some ppi(anilido)-dpi(Cu) pi-character. [(IPr)Cu(mu-H)]2 and (IPr)Cu(Ph) react with aniline to quantitatively produce (IPr)Cu(NHPh)/dihydrogen and (IPr)Cu(NHPh)/benzene, respectively. Analysis of the DFT calculations reveals that the conversion of [(IPr)Cu(mu-H)]2 and aniline to (IPr)Cu(NHPh) and dihydrogen is favorable with DeltaH approximately -7 kcal/mol and DeltaG approximately -9 kcal/mol.     

A theoretical study of an unusual Y-shaped three-coordinate Pt complex: Pt(0) σ-disilane complex or Pt(II) disilyl complex?

The unusual Y-shaped structure of the recently reported three-coordinate Pt complex Pt[NHC(Dip)(2)](SiMe(2)Ph)(2) (NHC = N-heterocyclic carbene; Dip = 2,6-diisopropylphenyl) was considered a snapshot of the reductive elimination of disilane. A density functional theory study indicates that this structure arises from the strong trans influence of the extremely σ-donating carbene and silyl ligands. Though this complex can be understood to be a Pt(II) disilyl complex bearing a distorted geometry due to the Jahn-Teller effect, its (195)Pt NMR chemical shift is considerably different from those of Pt(II) complexes but close to those of typical Pt(0) complexes. Its Si···Si bonding interaction is ~50% of the usual energy of a Si-Si single bond. The interaction between the Pt center and the (SiMe(2)Ph)(2) moiety can be understood in terms of donation and back-donation interactions of the Si-Si σ-bonding and σ*-antibonding molecular orbitals with the Pt center. Thus, we conclude that this is likely a Pt(0) σ-disilane complex and thus a snapshot after a considerable amount of the charge transfer from disilane to the Pt center has occurred. Phenyl anion (Ph(-)) and [R-Ar](-) [R-Ar = 2,6-(2,6-iPr(2)C(6)H(3))(2)C(6)H(3)] as well as the divalent carbon(0) ligand C(NHC)(2) also provide similar unusual Y-shaped structures. Three-coordinate digermyl, diboryl, and silyl-boryl complexes of Pt and a disilyl complex of Pd are theoretically predicted to have similar unusual Y-shaped structures when a strongly donating ligand coordinates to the metal center. In a trigonal-bipyramidal Ir disilyl complex [Ir{NHC(Dip)(2)}(PH(3))(2)(SiMe(3))(2)](+), the equatorial plane has a similar unusual Y-shaped structure. These results suggest that various snapshots can be shown for the reductive eliminations of the Ge-Ge, B-B, and B-Si σ-bonds.     

Synthesis and activity of ruthenium alkylidene complexes coordinated with phosphine and N-heterocyclic carbene ligands

This paper reports the synthesis and characterization of a variety of ruthenium complexes coordinated with phosphine and N-heterocyclic carbene (NHC) ligands. These complexes include several alkylidene derivatives of the general formula (NHC)(PR(3))(Cl)(2)Ru=CHR', which are highly active olefin metathesis catalysts. Although these catalysts can be prepared adequately by the reaction of bis(phosphine) ruthenium alkylidene precursors with free NHCs, we have developed an alternative route that employs NHC-alcohol or -chloroform adducts as "protected" forms of the NHC ligands. This route is advantageous because NHC adducts are easier to handle than their free carbene counterparts. We also demonstrate that sterically bulky bis(NHC) complexes can be made by reaction of the pyridine-coordinated precursor (NHC)(py)(2)(Cl)(2)Ru=CHPh with free NHCs or NHC adducts. Two crystal structures are presented, one of the mixed bis(NHC) derivative (H(2)IMes)(IMes)(Cl)(2)Ru=CHPh, and the other of (PCy(3))(Cl)(CO)Ru[eta(2)-(CH(2)-C(6)H(2)Me(2))(N(2)C(3)H(4))(C(6)H(2)Me(3))], the product of ortho methyl C-H bond activation. Other side reactions encountered during the synthesis of new ruthenium alkylidene complexes include the formation of hydrido-carbonyl-chloride derivatives in the presence of primary alcohols and the deprotonation of ruthenium vinylcarbene ligands by KOBu(t). We also evaluate the olefin metathesis activity of NHC-coordinated complexes in representative RCM and ROMP reactions.     

Stabilisation of iridium(III) fluoride complexes with NHCs

The first neutral, [IrClF(2)(NHC)(COD)] and [IrClF(2)(CO)(2)(NHC)] (NHC = IMes, IPr), and cationic, [IrF(2)py(IMes)(COD)][BF(4)] and [IrF(2)L(CO)(2)(NHC)][BF(4)] (NHC = IMes, L = PPh(2)Et, PPh(2)CCPh, py; NHC = IPr, L = py), NHC iridium(III) fluoride complexes, have been synthesised by the xenon difluoride oxidation of iridium(I) substrates. The stereochemistries of these iridium(III) complexes have been confirmed by multinuclear NMR spectroscopy in solution and no examples of fluoride-trans-NHC arrangements were observed. Throughout, CO was found to be a better co-ligand for the stabilisation of the iridium(III) fluoride complexes than COD. Attempts to generate neutral trifluoroiridium(III) complexes, [IrF(3)(CO)(NHC)], via the ligand substitution reaction of [IrF(3)(CO)(3)] with the free NHCs were unsuccessful.     

Mechanochemical synthesis of platinum(<Emphasis Type="SmallCaps">IV</Emphasis>) complexes with <Emphasis Type="Italic">N</Emphasis>-heterocyclic carbenes

A new method for the synthesis of complexes Pt^IV(NHC)X₄L (NHC is N-heterocyclic carbene of imidazole or benzimidazole series; X = Cl, Br; L is N-coordinated pyridine or NHC) based on mechanochemical oxidation of complexes Pt^II(NHC)X₂L with dichloroiodobenzene (PhICl₂) or pyridinium hydrobromide perbromide (PyHBr₃) was proposed. Mechanochemical activation led to reduction in the synthesis time and increase in the selectivity of halogenation and yields of the target Pt^IV complexes (74–98%) as compared to the reaction in solutions.     

<Emphasis Type="Italic">N</Emphasis>-Propylphthalimide-substituted bis-(NHC)PdX<Subscript>2</Subscript> complexes: synthesis,characterization and catalytic activity in direct arylation reactions

Palladium-catalyzed direct arylation of heteroaromatics has become a popular method for producing carbon–carbon bonds via C–H bond activation. A wide diversity of heteroaromatics such as furan, thiophenes and thiazoles can be used for this reaction. This paper reports the synthesis of N-propylphthalimide-substituted bis-(NHC)PdX₂ complexes (NHC = N-heterocyclic carbene), and their catalytic activity in direct arylation reactions. The complexes have been prepared from Ag(I)NHC precursors by transmetallation and characterized by spectroscopy and elemental analysis. The bis-(NHC)PdX₂ complexes show excellent activity as catalysts in the direct arylation reactions of 2-n-butylfuran, 2-n-butylthiophene and 2-isopropylthiazole.     

N-heterocyclic carbene complexes of Zn(II): synthesis, X-ray structures and reactivity

The synthesis of six novel zinc (II) mono(N-heterocyclic carbene) complexes is described. 1,3-Bis(mesityl)-imidazol-2-ylidene was reacted with the zinc salts ZnX₂ (X=Cl, CH₃COO, PhCOO, and PhCH₂COO) to yield the corresponding monomeric Zn-NHC complex ZnCl₂(NHC)(THF) (1) and dimeric [Zn(OOCCH₃)₂(NHC)]₂ (2), [Zn(OOCPh)₂(NHC)]₂ (3), [Zn(OOCCH₂Ph)₂(NHC)]₂ (4) (NHC=1,3-bis(mesityl)-imidazol-2-ylidene). Reaction of 1 with 2 equivalents of silver trifluoromethanesulfonate yielded monomeric Zn(O₃SCF₃)₂(NHC)(THF) (5), reaction of 1 with sodium {[R(+)-α-2-(1-phenyl-ethylimino)-methyl]-phenolate} yielded monomeric ZnCl(OC₆H₄-2-CHN(CHPhCH₃)(NHC) (6). Compounds 1, 4-6 were structurally characterized by X-ray analysis. Selected compounds were investigated for their activity in the copolymerization of carbon dioxide with cyclohexene oxide as well as in the ring-opening polymerization of cyclohexene oxide and ε-caprolactone.     

Density functional theory studies on the mechanism of the reduction of CO2 to CO catalyzed by copper(I) boryl complexes

The detailed reaction mechanism for the reduction of CO2 to CO catalyzed by (NHC)Cu(boryl) complexes (NHC = N-heterocyclic carbene) was studied with the aid of DFT by calculating the relevant intermediates and transition state structures. Our DFT calculations show that the reaction occurs through CO2 insertion into the Cu-B bond to give a Cu-OC(=O)-boryl species (i.e., containing Cu-O and C-B bonds), and subsequent boryl migration from C to O, followed by alpha-bond metathesis between pinB-Bpin (B2pin2, pin = pinacolate = OCMe2CMe2O) and (NHC)Cu(OBpin). The overall reaction is exergonic by 38.0 kcal/mol. It is the nucleophilicity of the Cu-B bond, a function of the very strong alpha-donor properties of the boryl ligand, rather than the oxophilicity of boron, which determines the direction of the CO2 insertion process. The boryl migration from C to O, which releases the product CO, is the rate-determining step and involves the "vacant" orbital orbital on boron. The (NHC)Cu(boryl) complexes show unique activity in the catalytic process. For the analogous (NHC)Cu(alkyl) complexes, the CO2 insertion into the Cu-C bond giving a copper acetate intermediate occurs with a readily achievable barrier. However, the elimination of CO from the acetate intermediate through a methyl migration from C to O is energetically inaccessible.     

N-heterocyclic carbene stabilized copper- and silver-phenylchalcogenolate ring complexes

The ligation of a N-heterocyclic carbene (NHC) to group 11 metal salts (Cu, Ag) was explored as an alternative to PR(3) ligands for the formation of copper- and silver-chalcogenolate cluster complexes. AgOAc and CuCl salts ligate with the NHC 1,3-di-isopropylbenzimidazole-2-ylidene ((i)Pr(2)-bimy) forming [Ag(OAc)((i)Pr(2)-bimy)] 1, [Ag(OAc)((i)Pr(2)-bimy)(2)] 2, [CuCl((i)Pr(2)-bimy)](2)3 and [CuCl((i)Pr(2)-bimy)(2)] 4 depending on the ratio of ligand to metal used. These have been characterized via spectroscopic and crystallographic methods. Complexes 1 and 3 were reacted with S(Ph)SiMe(3) and Se(Ph)SiMe(3) to form the polynuclear metal-chalcogenolates [Ag(4)(μ-EPh)(4)((i)Pr(2)-bimy)(4)] (5, E = S; 6, E = Se) and [Cu(3)(μ-EPh)(3)((i)Pr(2)-bimy)(3)] (7, E = S; 8, E = Se) in good yields. The structures of 5-8, as determined by single crystal X-ray crystallography, are described.     

Are N-heterocyclic carbenes "better" ligands than phosphines in main group chemistry? A theoretical case study of ligand-stabilized E2 molecules, L-E-E-L (L = NHC, phosphine; E = C, Si, Ge, Sn, Pb, N, P, As, Sb, Bi)

A theoretical examination of the L-E-E-L class of molecules has been carried out (E = group 14, group 15 element; L = N-heterocyclic carbene, phosphine), for which Si, Ge, P, and As-NHC complexes have recently been synthesized. The focus of this study is to predict whether it is possible to stabilize the elusive E(2) molecule via formation of L-E-E-L beyond the few known examples, and if the ligand set for this class of compounds can be extended from the NHC to the phosphine class of ligands. It is predicted that thermodynamically stable L-E-E-L complexes are possible for all group 14 and 15 elements, with the exception of nitrogen. The unknown ligand-stabilized Sn(2) and Pb(2) complexes may be considered attractive synthetic targets. In all cases the NHC complexes are more stable than the phosphines, however several of the phosphine derivatives may be isolable. The root of the extra stability conferred by the NHC ligands over the phosphines is determined to be a combination of the NHCs greater donating ability, and for the group 15 complexes, superior π acceptor capability from the E-E core. This later factor is the opposite as to what is normally observed in transition metal chemistry when comparing NHC and phosphine ligands, and may be an important consideration in the ongoing "renaissance" of low-valent main group compounds supported by ligands.     

Synthesis of monodentate bis(N-heterocyclic carbene) complexes of iridium: Mixed complexes of abnormal NHCs, normal NHCs, and triazole NHCs

A stepwise synthesis of mixed monodentate bis-NHC complexes of Ir(I), employing Ag(I)NHC complexes as transfer agents, yields complexes with two monodentate NHCs having different steric and electronic characteristics. The crystal structure of the mixed complex (5) with both a triazole-derived NHC ligand and an imidazole-derived NHC ligand is reported and both the NHC ring geometry and the M-NHC bond lengths are similar to related complexes. The complexes maintain their integrity over time and do not disproportionate, consistent with the NHC ligands not being labile.     

Aryl and NHC compounds of technetium and rhenium

Air- and water-stable phenyl complexes with nitridotechnetium(V) cores can be prepared by straightforward procedures. [TcNPh(2)(PPh(3))(2)] is formed by the reaction of [TcNCl(2)(PPh(3))(2)] with PhLi. The analogous N-heterocyclic carbene (NHC) compound [TcNPh(2)(HL(Ph))(2)], where HL(Ph) is 1,3,4-triphenyl-1,2,4-triazol-5-ylidene, is available from (NBu(4))[TcNCl(4)] and HL(Ph) or its methoxo-protected form. The latter compound allows the comparison of different Tc-C bonds within one compound. Surprisingly, the Tc chemistry with such NHCs does not resemble that of corresponding Re complexes, where CH activation and orthometalation dominate.     

Structure and bonding in three-coordinate N-heterocyclic carbene adducts of iron(II) bis(trimethylsilyl)amide

The molecular structures, chemical bonding and magnetochemistry of the three-coordinate iron(II) NHC complexes [(NHC)Fe{N(SiMe(3))(2)}(2)] (NHC = IPr, 2; NHC = IMes, 3) are reported.     

Structures and stabilities of group 13 adducts [(NHC)(EX3)] and [(NHC)2(E2X(n))] (E=B to In; X=H, Cl; n=4, 2, 0; NHC=N-heterocyclic carbene) and the search for hydrogen storage systems: a theoretical study

Quantum chemical calculations using density functional theory at the BP86/TZVPP level and ab initio calculations at the SCS-MP2/TZVPP level have been carried out for the group 13 complexes [(NHC)(EX(3))] and [(NHC)(2)(E(2)X(n))] (E=B to In; X=H, Cl; n=4, 2, 0; NHC=N-heterocyclic carbene). The monodentate Lewis acids EX(3) and the bidentate Lewis acids E(2) X(n) bind N-heterocyclic carbenes rather strongly in donor-acceptor complexes [(NHC)(EX(3))] and [(NHC)(2)(E(2)X(n))]. The equilibrium structures of the bidentate complexes depend on the electronic reference state of E(2)X(n), which may vary for different atoms E and X. All complexes [(NHC)(2)(E(2)X(4))] possess C(s) symmetry in which the NHC ligands bind in a trans conformation to the group 13 atoms E. The complexes [(NHC)(2)(E(2)H(2))] with E=B, Al, Ga have also C(s) symmetry with a trans arrangement of the NHC ligands and a planar CE(H)E(H)C moiety that has a E=E π bond. In contrast, the indium complex [(NHC)(2)(In(2) H(2))] has C(i) symmetry with pyramidal-coordinated In atoms in which the hydrogen atoms are twisted above and below the CInInC plane. The latter C(i) form is calculated for all chloride systems [(NHC)(2)(E(2)Cl(2))], but the boron complex [(NHC)(2)(B(2)Cl(2))] deviates only slightly from C(s) symmetry. The B(2) fragment in the linear coordinated complex [(NHC)(2)(B(2))] has a highly excited (3)(1)Σ(g)(-) reference state, which gives an effective B≡B triple bond with a very short interatomic distance. The heavier homologues [(NHC)(2)(E(2))] (E=Al to In) exhibit a anti-periplanar arrangement of the NHC ligands in which the E(2) fragments have a (1)(1) Δ(g) reference state and an E=E double bond. The calculated energies suggest that the dihydrogen release from the complexes [(NHC)(EH(3))] and [(NHC)(2)(E(2)H(n))] becomes energetically more favourable when atom E becomes heavier. The indium complexes should therefore be the best candidates of the investigated series for hydrogen-storage systems that could potentially deliver dihydrogen at close to ambient temperature. The hydrogenation reaction of the dimeric magnesium(I) compound [LMgMgL] (L=β-diketiminate) with [(NHC)(EH(3))] becomes increasingly exothermic with the trend B相似文献