一种基于形成杂多核络合物的荧光增敏效应的研究：Ⅲ.锰（Ⅱ）,钴（…

本研究了Ｍｎ＾２＋和Ｃｏ＾２＋对７－（８－羟基－３，６－二磺基萘偶氮）－８－羟基喹啉－５－磺酸－硼砂反应体系的混合荧光增敏作用。实验条件下，荧光增敏强度满足线性加和关系的范围是：Ｍｎ＾２＋浓度０￣２．９×１０＾－７ｍｏｌ／Ｌ；Ｃｏ＾２＋浓度０￣８．８～１０＾－７ｍｏｌ／Ｌ；总浓度不超过１．０×１０＾－６ｍｏｌ／Ｌ。检出限量为Ｍｎ＾２＋４．５×１０＾－９ｍｏｌ／Ｌ和Ｃｏ＾２＋１．４×１０＾－８ｍｏ     

含有吸附络合物溶液的倒数示波计时电位法的应用

Ｐｂ（Ⅱ）在０．２％乙二胺－５×１０＾－３ｍｏｌ·Ｌ＾－１ＨＯｘ－０．３ｍｏｌ·Ｌ＾－１ＫＯＨ溶液中，有良好的全数示波图，其峰电位Ｅｐ＝－１．０５（ｖｓ．ＳＣＥ），峰高与Ｐｂ＾２＋溶度在４．０×１０＾－７～２．０×１０＾－５ｍｏｌ·Ｌ＾－１内成正比，检测下限可达２．０×１０＾－７ｍｏｌ·Ｌ＾－１。本实验采用倒数示波计时电位法对铝合金“Ａ”中铅进行了测定，并直接通过示波图，对络合物的吸附属于性进行了     

阴离子表面活性剂—溴化十二烷基二甲基苄基铵—溴百里酚蓝显色反应…

本文研究了溴化十二烷基二甲基苄铵－溴百里酚蓝与阴离子表面活性剂显色反应的适宜条件结果表明，在ｐＨ７．４～８．２范围内阴离子表面活性剂与题示试剂形成１：２：１的绿色离子缔合物，其最大吸收峰位于６１４ｎｍ处。表观摩尔吸光系数分别为ε＾ＳＤＢＳ６１４＝３．９９×１０＾４Ｌ．ｍｏｌ＾－１．ｃｍ＾－１；ε＾ＳＤＳ６１４＝３．７０×１０＾４Ｌ．ｍｏｌ＾－１．ｃｍ＾－１，ε＾ＳＬＳ６１４＝１．７１×１０＾４Ｌ．     

钼—桑色素的极谱波及其用于钨精矿中钼的测定

本提出了测定钼的新极谱体系，最佳底液条件为ｐＨ２．１的盐酸－２．３７×１０＾－６ｍｏｌ／Ｌ桑色素－０．１７２ｍｏｌ／Ｌ氯酸钠。极谱波峰电位为－０．４３Ｖ（ｖｓ．ＳＣＥ），钼（Ⅵ）浓度在１．０４×１０＾－９￣４．５９×１０＾－８ｍｏｌ／Ｌ范围内与波高有线性关系，检出限３．６７×１０＾－１０ｍｏｌ／Ｌ。方法简便，快速、准确，并已直接应用于钨精矿中微量钼的测定。     

二溴邻羧基偶氮氯膦光度测定铝合金中微量锶

本介绍在一定量钙、钡共存下测定锶的新方法。在０．４８ｍｏｌ／Ｌ Ｈ２ＳＯ４介质中，二溴邻羧基偶氮氯膦与锶形成２：１的蓝色络合物，最大吸收波长为６３０ｎｍ。摩尔吸光系数为３．２×１０＾４Ｌ．ｍｏｌ＾－１．ｃｍ＾－１，锶量在０－１ｍｇ／Ｌ范围内符合比耳定律，经过二氧化锰共沉淀分离富集后，可测定各种复杂铝合金样品中痕量锶。     

乳酸环丙沙星单扫描示波极谱法研究

研究了乳酸环丙沙星的极谱伏安行为，在ｐＨ＝８．３的０．０２ｍｏｌ／Ｌ，ＮＨ４Ｃｌ－ＮＨ３．Ｈ２Ｏ底液中，乳酸环丙沙星能产生１个灵敏的还原峰，峰电位为－１．６１Ｖ，其导数峰高与浓度在３．９×１０＾－８～１．８×１０＾－６ｍｏｌ／Ｌ和１．８×１０＾６～１．１×１０＾－５ｍｏｌ／Ｌ范围内呈现良好的线性关系，相关系数ｒ＝０．９９９７，检测下限为２．５×１０＾－８ｍｏｌ／Ｌ，用于乳酸环丙沙星注射液的测定，相     

催化动力学光度法测定痕量苯酚

研究了在硫酸介质中苯酚对Ｉ＾－１催化Ｃｅ＾４＋－Ａｓ（Ⅲ）反应的抑制作用及其动力学条件。建立了用催化动力这光度法测定痕量苯酚的新方法，结果表明，在０．００１ｍｏｌ／ＬＣｅ（ＳＯ４）２，０．００１２５ｍｏｌ／Ｌ，Ａｓ２Ｏ３，０．０１ｍｇ／Ｌ，ＫＩ，０．０１２５ｍｏｌ／Ｌ，Ｈ２ＳＯ４和０．１３％（ｗ／ｖ）ＮａＣｌ溶液中测定苯酚，其表面摩尔吸光系数为２．１×１０＾５Ｌ．ｍｏｌ＾－１．ｃｍ＾－１，线性范围     

高锰酸钾—抗坏血酸化学发光体系测定抗坏血酸

本文研究了高锰酸钾－抗坏血酸化学发光体系，建立了测定抗坏血酸的化学发光分析新方法，线性响应的浓度范围为５．０×１０＾－７ｍｏｌ／Ｌ～４．０×１０＾－５ｍｏｌ／Ｌ，检出限为３．０×１０＾－７ｍｏｌ／Ｌ，对２．５×１０＾－６ｍｏｌ／Ｌ抗坏血酸进行１０次平行测定，相对标准偏差为１．６％，考察了２２种物质的干扰情况。用于维生素Ｃ片剂及注射液中抗坏血酸含量测定，结果令人满意。     

新显色剂二溴对甲基偶氮磺光度测定铅的研究与应用

在０．２４ｍｏｌ．Ｌ＾－１Ｈ３ＰＯ４介质中，铅与二溴对甲基偶氮磺形成１：２的蓝色配合物，最大吸收波长在６３０ｎｍ表现摩尔吸光系数为７．９９×１０＾４Ｌ．ｍｏｌ＾－１．ｃｍ＾－１铅量在０－２０μｇ／２５ｍＬ，内符合比耳定律，方法应用于铜合金中微量铅的测定，结果满意。     

KBrO3—KBr紫外分光光度法测定痕量水杨酸

研究了ＨＣｌ溶液中ＫＢｒＯ３－ＫＢｒ紫外分光光度法测定水杨酸的条件,建立了测定痕量水杨酸的新方法。结果表明,在０．６ｍｏｌ／ＬＨＣｌ,３＊１０＾－５ｍｏｌ／ＬＫＢｒＯ３,５＊１０＾－４ｍｏｌ／ＬＫＢｒ,６＊１０＾－４ｍｏｌ／ｌＫＩ溶中测定水杨酸,其线性范围为０．２－４．０ｍｇ／Ｌ,表观摩尔吸光系数为１．９＊１０＾－４Ｌ．ｍｏｌ＾－１．ｃｍ＾－１,Ｓａｎｄｅｌｌ为７．３μｇ／ｃｍ＾２。ｓｇ ｉｆ ｅ     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.