Layer-by-layer engineered Co-Al hydroxide nanosheets/graphene multilayer films as flexible electrode for supercapacitor

Multilayer films of Co-Al layered double hydroxide nanosheets (Co-Al LDH-NS) and graphene oxide (GO) were fabricated through layer-by-layer (LBL) assembly. By using a three-electrode system, the electrochemical performances of the films were investigated to evaluate their potential as electrode materials to be used in flexible supercapacitor devices. The Co-Al LDH-NS/GO multilayer films exhibited a high specific capacitance of 880 F/g and area capacitance of 70 F/m(2) under the scan rate of 5 mV/s. And the film exhibited good cycle stability over 2000 cycles. After treating the films at 200 °C in H(2) atmosphere, the specific capacitance and area capacitance were largely increased up to 1204 F/g and 90 F/m(2) due to partial reduction of GO. A flexible electrode by depositing Co-Al LDH-NS/GO multilayer film onto PET substrate was prepared to show the potential of Co-Al LDH-NS/GO films for flexible energy storage.     

Layer-by-layer films of hemoglobin or myoglobin assembled with zeolite particles: electrochemistry and electrocatalysis

Positively charged hemoglobin (Hb) or myoglobin (Mb) at pH 5.0 in solutions and negatively charged zeolite particles in dispersions were alternately adsorbed onto solid surfaces forming [zeolite/protein](n) layer-by-layer films, which was confirmed by quartz crystal microbalance (QCM) and cyclic voltammetry (CV). The protein films assembled on pyrolytic graphite (PG) electrodes exhibited a pair of well-defined, nearly reversible CV peaks at about -0.35 V vs. SCE at pH 7.0, characteristic of the heme Fe(III)/Fe(II) redox couples. Hydrogen peroxide (H(2)O(2)) and nitrite (NO(2)(-)) in solution were catalytically reduced at [zeolite/protein](7) film modified electrodes, and could be quantitatively determined by CV and amperometry. The shape and position of infrared amide I and II bands of Hb or Mb in [zeolite/protein](7) films suggest that the proteins retain their near-native structure in the films. The penetration experiments of Fe(CN)(6)(3-) as the electroactive probe into these films and scanning electron microscopy (SEM) results indicate that the films possess a great amount of pores or channels. The porous structure of ]zeolite/protein](n) films is beneficial to counterion transport, which is crucial for protein electrochemistry in films controlled by the charge-hopping mechanism, and is also helpful for the diffusion of catalysis substrates into the films. The proteins with negatively charged net surface charges at pH 9.0 were also successfully assembled with like-charged zeolite particles into layer-by-layer films, although the adsorption amount was less than that assembled at pH 5.0. The possible reasons for this were discussed, and the driving forces were explored.     

Layer-by-layer assembled films of cellulose nanowires with antireflective properties

Natural nanowires (NWs) of cellulose obtained from a marine animal tunicate display surprisingly high uniformity and aspect ratio comparable with synthetic NWs. Their layer-by-layer assembled (LBL) films show strong antireflection (AR) properties having an origin in a novel highly porous architecture reminiscent of a "flattened matchsticks pile", with film-thickness-dependent porosity and optical properties created by randomly oriented and overlapping NWs. At an optimum number of LBL deposition cycles, light transmittance reaches nearly 100% (lambda approximately 400 nm) when deposited on a microscope glass slide and the refractive index is approximately 1.28 at lambda = 532 nm. In accordance with AR theory, the transmittance maximum red-shifts and begins to decrease after reaching the maximum with increasing film thickness as a result of increased light scattering. This first example of LBL layers of cellulose NWs can be seen as an exemplary structure for any rigid axial nanocolloids, for which, given the refractive index match, AR properties are expected to be a common property. Unique mechanical properties of the tunicate NWs are also a great asset for optical coatings.     

Electrochemical study of methylene blue/titanate nanotubes nanocomposite and its layer-by-layer assembly multilayer films

Titanate nanotubes (TNT) were proven to be efficient support for the immobilization of methylene blue (MB). UV–vis absorption and Fourier transform infrared spectra showed that the effect of MB absorbed on TNT was better than nanocrystalline anatase TiO₂ (TNP). The quantity of MB absorbed onto TNT was found to be greater than that of TNP and the electrode modified with the MB–TNT film was more stable due to the strong interaction between TNT and MB as well. The absorption of MB on TNT was impacted by the pH value of the reaction solution for the change of surface charge. Electrochemical oxidation of dopamine (DA) at different electrodes was studied. The result showed that the MB–TNT composite film exhibited excellent catalytic activities to DA compared to those of pure TNT, which is a result of the great promotion of the electron-transfer rate between DA and the electrode surface by the MB–TNT film. Furthermore, the layer-by-layer self-assembly behavior of the electrochemically functional MB–TNT nanocomposite was also discussed after obtaining the stable colloid suspension of MB–TNT. The excellent electrochemical ability and the easy fabrication of layered nanocomposite make the MB–TNT nanocomposite very promising in electrochemistry study and new nanotube-based devices.     

Layer-by-layer assembled protein/polymer hybrid films: nanoconstruction via specific recognition

In the present study it is shown that streptavidin-containing multilayer films with varying numbers of polyelectrolyte spacer layers can be fabricated reproducibly using optimized deposition conditions. Direct alternation of streptavidin and PLB leads to multilayer systems with an average streptavidin thickness of 5.3 nm which is in good agreement with the dimensions of the protein. When the streptavidin layers are spacered by more polyelectrolyte layers the distance between the protein sheets is increased up to e.g. 6.5 nm in the case of (PLB/PSS/PAH/PSS/PLB) as spacer layer. X-ray reflectivity reveals that streptavidin increases the surface roughness of the films probably due to the rigid three-dimensional structure of the protein. The control of surface roughness seems to be essential for a successful multilayer build-up. The property of PLB to provide for multilayer construction by two different interactions (electrostatic and specific) allowed to probe the interpenetration depth of adjacent layers. For the [PLB/(PSS/PL)₂/streptavidin] system an interpenetration depth of about 4 polymer layers corresponding to approximately 3.4 nm has been derived. These data are in agreement with a model for pure polyelectrolyte films obtained from neutron and X-ray reflectivity data.     

Layer-by-layer deposited organic/inorganic hybrid multilayer films containing noncentrosymmetrically orientated azobenzene chromophores

Organic/inorganic hybrid multilayer films with noncentrosymmetrically orientated azobenzene chromophores were fabricated by the sequential deposition of ZrO2 layers by a surface sol-gel process and subsequent layer-by-layer (LbL) adsorption of the nonlinear optical (NLO)-active azobenzene-containing polyanion PAC-azoBNS and poly(diallyldimethylammonium chloride) (PDDA). Noncentrosymmetric orientation of the NLO-active azobenzene chromophores was achieved because of the strong repulsion between the negatively charged ZrO(2) and the sulfonate groups of the azobenzene chromophore in PAC-azoBNS. Regular deposition of ZrO(2)/PAC-azoBNS/PDDA multilayer films was verified by UV-vis absorption spectroscopy and quartz crystal microbalance measurements. Both UV-vis absorption spectroscopy and transmission second harmonic generation (SHG) measurements confirmed the noncentrosymmetric orientation of the azobenzene chromophores in the as-prepared ZrO2/PAC-azoBNS/PDDA multilayer films. The square root of the SHG signal (I(2omega)(1/2)) increases with the increase of the azobenzene graft ratio in PAC-azoBNS as the number of deposition cycles of the ZrO(2)/PAC-azoBNS/PDDA films remains the same, while the second-order susceptibility chi(zzz)(2) of the film decreases with the increase of the azobenzene graft ratio. Furthermore, the present method was successfully extended to realize the noncentrosymmetric orientation of azobenzene chromophores in multilayer films when small organic azobenzene compounds with carboxylic acid and/or hydroxyl groups at one end and sulfonate groups at the other end were used. The present method was characterized by its simplicity and flexibility in film preparation, and it is anticipated to be a facile way to fabricate second-order nonlinear optical film materials.     

Layer-by-layer assembled multilayer of graphene/Prussian blue toward simultaneous electrochemical and SPR detection of H2O2

A new type of chemically converted graphene sheets, cationic polyelectrolyte-functionalized ionic liquid decorated graphene sheets (PFIL-GS) composite, was synthesized and characterized by Ultraviolet-visible (UV-vis) absorption, Fourier transform infrared, and Raman spectroscopy. It was found that the presence of PFIL enabled the formation of a very stable aqueous dispersion due to the electrostatic repulsion between PFIL modified graphene sheets. With respect to the excellent dispersibility of this material, we have fabricated a novel PFIL-GS/Prussian blue (PB) nanocomposite multilayer film via classic layer-by-layer (LBL) assembly. The assembly process was confirmed by UV-vis spectroscopy and surface plasmon resonance (SPR) spectroscopy, which showed linear responses to the numbers of the deposited PFIL-GS/PB bilayers. Moreover, the as-prepared composite films were used to detect hydrogen peroxide (H₂O₂) by electrochemical surface plasmon resonance (EC-SPR) spectroscopy. This real time EC-SPR technique can provide simultaneous monitoring of both optical SPR signal and electrochemical current responses upon injecting H₂O₂ into the reaction cell. The experimental results revealed that both the electrochemical and SPR signal exhibited splendid linear relationship to the concentration of the injected H₂O₂, and the detection limit could be up to 1 μM.     

Layer-by-layer self-assembly polytungstogermanate multilayer films and their photocatalytic properties under sunlight irradiation

Seven different types of thio- and/or amine-modified cellulose resin materials were synthesized and their mercury (II) ion adsorption properties determined. All seven resins showed good mercury (II) adsorption capability in the more neutral pH regions. However, the o-benzenedithiol- and o-aminothiophenol-modified cellulosic resins were found to be very effective in removing mercury (II) ions from strongly acidic media. For example, 93.5-100% mercury (II) ion recoveries from very acid aqueous solutions (nitric acid concentration ranged from 0.1 to 2.0 mol/L) were obtained using the o-benzenedithiol-modified resin while recoveries ranged from ca. 50% to 60% for the o-aminothiophenol-modified resin. An adsorption capacity of 23 mg (as Hg atoms) per gram of resin was observed for the o-benzenedithiol-modified cellulose in the presence of 1.0 mol/L nitric acid. This same resin shows very good selectivity for mercury (II) as only ruthenium (II) also somewhat adsorbed onto it out of 14 other metal ions studied (Ag(+), Al(3+), As(3+), Co(2+), Cd(2+), Cr(3+), Cu(2+), Fe(3+), Mn(2+), Ni(2+), Pt(2+), Pb(2+), Ru(2+), and Zn(2+)).     

Layer-by-layer assembled microgel films with high loading capacity: reversible loading and release of dyes and nanoparticles

Multilayer films containing microgels of chemically cross-linked poly(allylamine hydrochloride) (PAH) and dextran (named PAH-D) were fabricated by layer-by-layer deposition of PAH-D and poly(styrene sulfonate) (PSS). The successful fabrication of PAH-D/PSS multilayer films was verified by quartz crystal microbalance measurements and cross-sectional scanning electron microscopy. The as-prepared PAH-D/PSS multilayer films can reversibly load and release negatively charged dyes such as methyl orange (MO) and fluorescein sodium and mercaptoacetic acid-stabilized CdTe nanoparticles. The loading capacity of the film for MO can be as large as approximately 3.0 microg/cm2 per bilayer, which corresponds to a MO density of 0.75 g/cm3 in the film. The high loading capacity of the PAH-D/PSS films originates from the cross-linked film structure with sufficient binding groups of protonated amine groups, as well as their high swelling capability by solvent. The loaded material can be released slowly when immersing the films in 0.9% normal saline. Meanwhile, the PAH-D/PSS multilayer films could deposit directly on either hydrophilic or hydrophobic substrates such as quartz, polytetrafluoroethylene, polystyrene, poly(ethylene terephthalate), and polypropylene. The microgel films of PAH-D/PSS are expected to be widely useful as matrixes for loading functional guest materials and even for controlled release.     

Fabrication and photovoltaic performance of hierarchically titanate tubular structures self-assembled by nanotubes and nanosheets

Hierarchically macro-/mesoporous titanate tubular structures (HTT) self-assembled by nanotubes and nanosheets were fabricated by hydrothermal treatment of titanate glycolate rods in 0.1 M NaOH aqueous solution. Double-layered dye-sensitized solar cells (DSSCs) composed of a P25 nanoparticle (NP) underlayer and a tubular TiO(2) overlayer demonstrated an enhanced photovoltaic conversion efficiency of 6.2%.     

Layer-by-layer self-assembly of polyelectrolyte complexes and their multilayer films for pervaporation dehydration of isopropanol

Two negatively charged polyelectrolyte complex colloidal nanoparticles (PEC⁻) and one positively charged nanoparticle (PEC⁺) were prepared and used as novel layer-by-layer (LbL) building blocks. These PEC nanoparticles include poly(2-methacryloyloxy ethyl trimethylammonium chloride)/sodium carboxymethyl cellulose (PDMC/CMCNa PEC⁻), poly(diallyldimethylammonium chloride)/CMCNa (PDDA/CMCNa PEC⁻) and PDDA/poly(sodium-p-styrenesulfonate) (PDDA/PSS PEC⁺). LbL multilayer films based on (PEC⁺/PEC⁻) were constructed on both quartz slides and modified polyamide (MPA) reverse osmosis support membranes. UV–vis spectroscopy, quartz crystal microbalance (QCM), field emission scanning microscopy (FESEM) and atomic force microscopy (AFM) were utilized to follow the thickness growth and morphology evolution of these multilayer films with increasing bi-layer numbers. LbL multilayer films deposited on MPA support membranes were subjected to pervaporation dehydration of 10 wt% water–isopropanol and effect of bi-layer numbers and feed temperature on pervaporation performance was studied. Generally, PEC⁺/PEC⁻ can be LbL self-assembled successfully on both substrates with a thickness growth rate ca. 200 nm/bi-layer. Moreover, PEC⁺/PEC⁻ multilayer films show high pervaporation performance with film thickness up to several micrometers. For example, performance of the multilayer films in dehydrating 10 wt% water–isopropanol at 50 °C is J = 1.18 kg/m² h, α = 1013 for (PEC⁺/PDMC-CMCNa PEC⁻)₂₄ and J = 1.36 kg/m² h, α = 938 for (PEC⁺/PDMC-CMCNa PEC⁻)₂₅, respectively.     

Layer-by-layer self-assembly and electrocatalytic properties of poly(ethylenimine)-silicotungstate multilayer composite films

Hybrid multilayer films composed of poly(ethylenimine) and the Keggin-type polyoxometalates [ SiW₁₁O₃₉ ]^{8 -} ( SiW₁₁ ) {\left[ {{\hbox{Si}}{{\hbox{W}}_{{11}}}{{\hbox{O}}_{{39}}}} \right]^{{8} - }}\left( {{\hbox{Si}}{{\hbox{W}}_{{11}}}} \right) and [ SiW₁₁Co^II( H₂O )O₃₉ ]^{6 -} ( SiW₁₁Co ) {\left[ {{\hbox{Si}}{{\hbox{W}}_{{11}}}{\hbox{C}}{{\hbox{o}}^{\rm{II}}}\left( {{{\hbox{H}}_2}{\hbox{O}}} \right){{\hbox{O}}_{{39}}}} \right]^{{6} - }}\left( {{\hbox{Si}}{{\hbox{W}}_{{11}}}{\hbox{Co}}} \right) were prepared on glassy carbon electrodes by layer-by-layer self-assembly, and were characterized by cyclic voltammetry and scanning electron microscopy. UV-vis absorption spectroscopy of films deposited on quartz slides was used to monitor film growth, showing that the absorbance values at characteristic wavelengths of the multilayer films increase almost linearly with the number of bilayers. Cyclic voltammetry indicates that the electrochemical properties of the polyoxometalates are maintained in the multilayer films, and that the first tungsten reduction process for immobilized SiW₁₁ and SiW₁₁Co is a surface-confined process. Electron transfer to [ Fe( CN )₆ ]^{3 - /4 -} {\left[ {{\hbox{Fe}}{{\left( {\hbox{CN}} \right)}_6}} \right]^{{3} - /{4} - }} and [ Ru( NH₃ )₆ ]^{3 + /2 +} {\left[ {{\hbox{Ru}}{{\left( {{\hbox{N}}{{\hbox{H}}_3}} \right)}_6}} \right]^{{3} + /{2} + }} as electrochemical probes was also investigated by cyclic voltammetry. The (PEI/SiW₁₁Co)_n multilayer films showed excellent electrocatalytic reduction properties towards nitrite, bromate and iodate.     

Photoelectrochemical properties of alternating multilayer films composed of titania nanosheets and Zn porphyrin

Alternating multilayer films composed of titania nanosheets and Zn porphyrins were prepared by use of a previously reported Langmuir-Blodgett film-transfer method in order to fabricate photoelectrochemical devices. Closely packed titania nanosheet monolayers on indium tin oxide (ITO), mica, and quartz surfaces strongly adsorbed cationic [5,10,15,20-tetrakis(1-methylpyridinium-4-yl)porphyrinatozinc]4+ (ZnTMPyP4+) by electrostatic interactions. The alternating deposition process afforded nanometer-scale multilayer films with the following structure: solid surface/(titania nanosheet/ZnTMPyP4+)n (n is the number of layers). The multilayer films were characterized by various physical measurements, including AFM, XRD, and UV-visible spectra. The visible-light irradiation of this multilayer film on an ITO electrode in the presence of triethanolamine as an electron donor yielded an anodic photocurrent. The action spectrum was consistent with the absorption spectrum of ZnTMPyP4+, which indicates that the photoexcitation of ZnTMPyP4+ is responsible for the photocurrent generation. However, the photocurrent density decreased with an increasing number of layers, which indicates that the harvesting of photoexcited electrons vertically through the titania nanosheets in the ITO/(titania nanosheet/ZnTMPyP4+)n structure was not efficient. To overcome this problem, the use of a lateral interlayer connection to all of the titania nanosheets with Ag paste was examined. As a result, a dramatic improvement in the photocurrent density was obtained. Thus, for efficient photocurrent generation with the titania nanosheet-ZnTMPyP4+ composite material, the lateral connection to all of the titania nanosheet layers is effective.     

Layer-by-layer assembly of silicotungstate multilayer films modified on glassy carbon electrode and their electrochemical behaviors

A new electrode was modified by multilayer films composed of heteropolyanion (SiW12) and cationic polymer poly(diallyldimethylammonium chloride) through electrochemical growth. The modified electrode electrochemical behavior, the effect of solution pH and electrocatalytic response to the reduction of BrO3- and NO2- have been investigated. The result shows that the electrochemical process of multilayer films modified electrode including SiW12 is a reversible process by electrochemical step. One-electron process has no proton participation in the first step, and one-electron process is accompanied by one proton participation in the second step and two-electron process is accompanied by two protons participation in the third step. The films grow uniformly, and the peak currents increase with increasing layer numbers. The peak currents increase with scan rate, and the reduced potentials of multilayer films shift negatively with increasing pH. The electrochemical mechanism of multilayer films was suggested.     

Alternating bioactivity of multilayer thin films assembled from charged derivatives of chitosan

Charged derivatives of chitosan, N-sulfofurfuryl chitosan (SFC) and N-[(2-hydroxyl-3-trimethylammonium)propyl]chitosan chloride (HTACC) were prepared by reductive alkylation of amino groups of chitosan (CHI) using 5-formyl-2-furansulfonic acid, sodium salt (FFSA) as a reagent and ring opening of glycidyltrimethylammonium chloride (GTMAC) by amino groups of chitosan, respectively. The chemical structures of the charged derivatives were verified by (1)H NMR and FTIR analyses. Multilayer assembly of SFC, HTACC, CHI and the selected oppositely charged polyelectrolytes was monitored by a quartz crystal microbalance (QCM). Stratification of the multilayer film fabricated on plasma-treated poly(ethylene terephthalate) (treated PET) substrate was demonstrated by water contact angle data. The coverage of the assembled films was characterized by AFM and ATR-FTIR analyses. The bioactivity of the deposited multilayer film on the treated PET substrate was tested against selected proteins having a distinctive size and charge. This research strongly suggests that both SFC and HTACC are potential candidates for altering the surface bioactivity of materials.     

Layer-by-layer deposition of a polythiophene/Au nanoparticles multilayer with effective electrochemical properties

Multilayers consisting of a water soluble polythiophene derivative and Au nanoparticles have been deposited onto different electrode substrates by means of layer-by-layer deposition technique. The assembly of the films has been performed by taking advantage of the electrostatic interactions between the positively charged imidazolic moiety of the polythiophene chain and the negative charges of citrate ions surrounding Au nanoparticles, as well of the affinity of S to Au. The nanoparticles result stably grafted to the organic matrix. The resulting modified electrodes have been characterised through electrochemical, spectroelectrochemical and microscopic techniques. The results evidenced that a high number of individual nanoparticles is present inside the multilayer. The presence of nanoparticles is of chief importance for most effective charge percolation through the multilayer, as suggested by the responses to electroactive probe species in solution. The electrocatalytic performances of the modified electrodes have been tested with respect to the oxidation of ascorbic acid.     

Layer-by-layer deposition of a polythiophene/Au nanoparticles multilayer with effective electrochemical properties

Multilayers consisting of a water soluble polythiophene derivative and Au nanoparticles have been deposited onto different electrode substrates by means of layer-by-layer deposition technique. The assembly of the films has been performed by taking advantage of the electrostatic interactions between the positively charged imidazolic moiety of the polythiophene chain and the negative charges of citrate ions surrounding Au nanoparticles, as well of the affinity of S to Au. The nanoparticles result stably grafted to the organic matrix. The resulting modified electrodes have been characterised through electrochemical, spectroelectrochemical and microscopic techniques. The results evidenced that a high number of individual nanoparticles is present inside the multilayer. The presence of nanoparticles is of chief importance for most effective charge percolation through the multilayer, as suggested by the responses to electroactive probe species in solution. The electrocatalytic performances of the modified electrodes have been tested with respect to the oxidation of ascorbic acid.

     

Significant reduction of harmful compounds in tobacco smoke by the use of titanate nanosheets and nanotubes

Titanate nanosheets and nanotubes have first been introduced into cigarette filter, a great range of harmful compounds including tar, nicotine, ammonia, hydrogen cyanide, selected carbonyls and phenolic compounds can be reduced efficiently.     

Layer-by-layer self-assembly of multilayer films containing DNA and Eu3+: their characteristics and interactions with small molecules

Thin films of alternating DNA and rare earth ion Eu3+ layers from dilute aqueous solutions were fabricated onto quartz substrates and silicon wafers through the layer-by-layer (LbL) self-assembly technique. UV-visible spectroscopy shows that a uniform layer of DNA can be fully adsorbed onto each alternate Eu3+ layer. Microscopic FTIR spectra show Eu3+ interacts with both the phosphate groups and nitrogenous bases of DNA, and the formation of [DNA/Eu]n films induces a change of the conformation of the DNA secondary structure to a certain extent. Various parameters affecting the DNA or Eu3+ loading into the composite film were investigated with emphasis on the effect of the pH and ionic strength of the DNA solution used for the film preparation. Atomic force microscopy was utilized to observe the morphologies of the DNA in the films obtained at two different pH values. Small molecules, such as alpha-tenoyltrifluoroacetone (TTA), Hoechst 33258 (Hoe), and ethidium bromide (EB), are all observed to interact with Eu3+ or DNA in the [DNA/Eu]n films. The [DNA/Eu]n films incorporated with these molecules show different fluorescent characteristics, and the fluorescence intensity of the films versus the bilayer number has a good linear relationship, confirming the potential for creating a different luminescence ability of the multilayer by controlling the number of DNA/Eu bilayers.