Integrity and Structural Characteristics of the M6E8 (E=S, Se, Te) Cluster Core: Syntheses and Structures of [Co6S8(PR3)6] n+ (R=Me2Ph, n=1; R=OMe, n=0)

Two new members of the hexanuclear series [Co₆S₈(PR₃)₆] ⁿ⁺, complexes [Co₆S₈(PMe₂Ph)₆](ClO₄) (1) and [Co₆S₈P(OMe)_{3 6}] (2), have been synthesizes and characterized by X-ray diffraction analyses. Their formation process was postulated to go through trinuclear ₃--S bridged moieties. The structural characteristics of the M₆E₈P₆ skeleton of a whole series of [M₆E₈(PR₃)₆] ⁿ⁺ (M=Co, Cr, Fe, Mo; E=S, Se, Te) complexes are presented in terms of atomic distances and core volumes.     

Superstructure of a phosphor material Ba3MgSi2O8 determined by neutron diffraction data

Ba₃MgSi₂O₈, a phosphor host examined for use in white-light devices and plant-growth lamps, was synthesized at 1225 °C in air. Its crystal structure has been determined and refined by a combined powder X-ray and neutron Rietveld method (, Z=3, a=9.72411(3) Å, c=7.27647(3) Å, V=595.870(5) Å³; R_p/R_wp=3.79%/5.03%, χ²=4.20). Superstructure reflections, observed only in the neutron diffraction data, provided the means to establish the true unit cell and a chemically reasonable structure. The structure contains three crystallographically distinct Ba atoms—Ba1 resides in a distorted octahedral site with S₆ () symmetry, Ba2 in a nine-coordinate site with C₃ (3) symmetry, and Ba3 in a ten-coordinate site with C₁ (1) symmetry. The Mg atoms occupy distorted octahedral sites, and the Si atom occupies a distorted tetrahedral site.     

Synthesis, Structure, and 31P NMR of Sulfur/Oxygen-Bridged Incomplete Cubane-Type Molybdenum and Tungsten Clusters with Triphenylphosphine Ligands

Sulfur/oxygen-bridged incomplete cubane-type triphenylphosphine molybdenum and tungsten-clusters [Mo₃S₄Cl₄(H₂O)₂(PPh₃)₃]·3THF (1A), [Mo₃S₄Cl₄(H₂O)₂(PPh₃)₃]·2THF (2A), [Mo₃OS₃Cl₄(H₂O)₂(PPh₃)₃]·2THF (1B), and [W₃S₄Cl₄(H₂O)₂(PPh₃)₃]·2THF (1C) were prepared from the corresponding aqua clusters and PPh₃ in THF/MeOH. On recrystallization from THF, procedures with and without addition of hexane to the solution gave 1A and 2A, respectively, while the procedures gave no effect on the formation of 1B and 1C. Crystallographic results obtained are as follows: 1A: monoclinic, P2₁/n, a=17.141(4) Å, b=22.579(5) Å, c=19.069(4) Å, =96.18(2)°, V=7337(3) ų, Z=4, R(R _w)=0.078(0.102); 1C: monoclinic, P2 ₁/c, a=12.635(1) Å, b=20.216(4) Å, c=27.815(3) Å, =96.16(1)°, V=7062(2) ų, Z=4, R(R _w)=0.071(0.083). If the phenyl groups are ignored, the molecule [Mo₃S₄Cl₄(H₂O)₂(PPh₃)₃] in 2A has idealized CS symmetry with the mirror plane perpendicular to the plane determined by the metal atoms, while the molecule in 1A does not have the symmetry. The tungsten compound 1C is isomorphous with the molybdenum compound 2A. ³¹P NMR spectra of 1A, 2A, and 1C were obtained and compared with similar clusters with dmpe (1,2-bis(dimethylphosphino)ethane) ligands.     

Rearrangement of the {Mo6S8}cluster fragment to {Mo4S4} and a New {Mo6S6} Cluster Nucleus: Crystal Structure of K6[Mo4S4(CN)12]·10H2O and (18-Crown-6K)8[Mo6S6(CN)16]·17.5H2O

Two new compounds containing molybdenum thiocyanide cluster anions, K₆[Mo₄S₄(CN)₁₂]·10H₂O (1) and (18-crown-6K)₈[Mo₆S₆(CN)₁₆]·17.5H₂O (2), were synthesized and investigated by X-ray structure analysis. Crystal data: a=11.8430(17), b=11.8430(17), c=35.170(7) , V=4932.8(14) ³, space group I4₁/a, Z=4, d_calc=1.563 g/cm³ for 1; a=28.7513(5), b=18.4190(3), c=20.7586(4) , =118.5982(7)°, V=9651.9(3) ³, space group C2/m, Z=4, d_calc =1.563 g/cm³ for 2. The [Mo₄S₄(CN)₁₂]^6- cluster anion in 1 has an ordinary structure typical of cubane transition metal complexes. In the structure of the [Mo₆S₆(CN)₁₆]^8- anion of 2, two crystallographically independent molybdenum atoms form a Mo₆ metallocluster, represented as two edge-sharing tetrahedra.     

Refinement of the cation distribution in Nb-Mo double oxide

The structure of Nb₂Mo₃O₁₄ double oxide is refined from powder data using synchrotron radiation and the anomalous scattering effect; space group P $ \bar 4 The structure of Nb₂Mo₃O₁₄ double oxide is refined from powder data using synchrotron radiation and the anomalous scattering effect; space group P 2₁ m is found for the material. It is demonstrated that in the tetragonal unit cell with parameters a = 23.173 ?, c = 4.0027 ? Nb⁵⁺ and Mo⁶⁺ ions are stochastically distributed in MO₆ octahedra and MO₇ pentagonal bipyramids of the polygonal network structure of the Mo₅O₁₄ type. Original Russian Text Copyright ? 2008 by T. Yu. Kardash, L. M. Plyasova, V. M. Bondareva, and A. N. Shmakov __________ Translated from Zhurnal Strukturnoi Khimii, Vol. 49, No. 4, pp. 729–735, May–June, 2008.     

The crystal structure determinations and refinements of K2S2O7, KNaS2O7 and Na2S2O7 from X-ray powder and single crystal diffraction data

The crystal structures of K₂S₂O₇, KNaS₂O₇ and Na₂S₂O₇ have been solved and/or refined from X-ray synchrotron powder diffraction data and conventional single-crystal data. K₂S₂O₇: From powder diffraction data, monoclinic C2/c, Z=4, a=12.3653(2), b=7.3122(1), , β=93.0792(7)°, R_Bragg=0.096. KNaS₂O₇: From powder diffraction data; triclinic , Z=2, a=5.90476(9), b=7.2008(1), , α=101.7074(9), β=90.6960(7), γ=94.2403(9)°, R_Bragg=0.075. Na₂S₂O₇: From single-crystal data; triclinic , Z=2, a=6.7702(9), b=6.7975(10), , α=116.779(2), β=96.089(3), γ=84.000(3)°, R_F=0.033. The disulphate anions are essentially eclipsed. All three structures can be described as dichromate-like, where the alkali cations coordinate oxygens of the isolated disulphate groups in three-dimensional networks. The K-O and Na-O coordinations were determined from electron density topology and coordination geometry. The three structures have a cation-disulphate chain in common. In K₂S₂O₇ and Na₂S₂O₇ the neighbouring chains are antiparallel, while in KNaS₂O₇ the chains are parallel. The differences between the K₂S₂O₇ and Na₂S₂O₇ structures, with double-, respectively single-sided chain connections and straight, respectively, corrugated structural layers can be understood in terms of the differences in size and coordinating ability of the cations.     

Mg二次电池正极材料Cu2Mo6S8的合成与表征

采用CuS.H2O、MoS2、Mo为原料,用熔盐法(KCl为熔盐)合成了谢弗雷尔相的Cu2Mo6S8正极材料,并用XRD,SEM,循环伏安测试,充放电测试对材料的结构和电化学性能进行研究。XRD结果表明本Cu2Mo6S8正极材料属于R3空间群,具有良好的晶型。电化学测试表明,当材料在电压0.2～2 V范围内进行充放电时,其放电比容量在90 mAh.g-1左右,循环稳定性和可逆性均良好。该材料的充放电曲线中在1.2 V和1.9 V分别有还原峰,0.7 V和1.0 V分别有氧化峰,与伏安曲线相对应。     

The disordered cubic structure of Ca7Co3Ga5O18

The new mixed oxide having composition close to Ca₇Co₃Ga₅O₁₈ was synthesized from CaCO₃, Co₃O₄ and Ga₂O₃ at 1150 °C in air and studied by neutron and synchrotron X-ray powder diffraction, selected-area electron diffraction and high-resolution electron microscopy. The structure was refined, using time-of-flight (TOF) neutron powder diffraction data, in space group F432, with and Z=8, to R_F=0.7%. It is considerably disordered, with four different tetrahedral sites randomly occupied by Co and Ga atoms at a ratio of 1:2. The tetrahedra form a disordered (Co_1/3Ga_2/3)O₂ 3D-framework inside which isolated CoO₆ octahedra, surrounded by 8 Ca atoms, are located. The structure is related to the ordered structure of Ca₁₄Al₁₀Zn₆O₃₅. Electron diffraction patterns confirmed the symmetry and unit cell and revealed no diffuse scattering. High-resolution electron microscopy images showed the absence of extended structural defects.     

Thermal transformations of α-H6P2Mo18O62·nH2O heteropolyacid

According to the ³¹P NMR spectroscopy, heteropolyacid (HPA) H₆P₂Mo₁₈O₆₂·nH₂O (P₂Mo₁₈), -isomer of the Dawson structure, transforms upon heating above 80 °C partially (up to 30%) to -isomer, in which both polar groups Mo₃O₁₃ of the heteropolyanion are turned by 60° around the N₃ axis, and partially to -isomer in which only one group is turned. The - and -isomers of P₂Mo₁₈ have been found for the first time. Their transformation into the -isomer occurs upon rehydration in one week in air and in 1 h in an aqueous solution. HPA P₂Mo₁₈ decomposes on heating up to 350 °C to HPA H₃PMo₁₂O₄₀ (PMo₁₂) and a previously unknown phase of the HPMo₆I₂₁ composition, which in its turn decomposes at 375 °C to molybdenyl phosphates and IiI₃. The PMo₁₂ decomposition occurs via two routes to form the same products at temperatures of 400 and 450 °C with corresponding exotherms of IiI₃ crystallization.     

Electronic structure of the Fe3S4 cluster and its quasi-aromaticity

The localized molecular orbitals and their energy levels for the clusters [Fe₃S₄(SH)₃]^2–, [(HS)₃Fe₃S₄·Ni(PH₃)]^2–, [Mo₃S₄(OH₂)₉]⁴⁺, and [Mo₃S₄·Ni]⁴⁺ have been calculated by mean of the Edmiston-Ruedenberg energy localization technique under the CNDO/2 approximation in order to reveal the resemblance between [Fe₃S₄]⁺ and [Mo₃S₄]⁴⁺ in the geometrical configurations and the addition reactivities with heterometal atoms. It is shown that in these two cluster species with core {M ₃(₃-S)(-S)₃} of similar structure (M = Mo, Fe) there exist three synergically connected three-centered two-electron (M-S-M) -bonds around the puckered six-membered {M₃S₃} rings on account of delocalization of a lone electron pair on each bridging S atom; these (M-S-M) -bonds are thus capable of forming cubane-like heterometal clusters with intruder metal atoms through the ( M) bonding. It is therefore seen that unlike the [Mo₃S₄]⁴⁺ with appreciable bonding between the Mo atoms, the extra d-electrons on the metal atoms in the [Fe₃S₄]⁺ cluster are localized on the Fe atoms, exhibiting an electronic structure significantly different from that of the [Mo₃S₄]⁴⁺ cluster.     

Study of C60·2S8 by the methods of induced electron emission

It was shown by the methods of induced electron emission that a transfer of the electron density from C₆₀ molecules to the eight-membered ring of sulfur is characteristic of C₆₀·2S₈. The value of the (+)-plasmon energy for C₆₀·2S₈ is approximately 1 eV less than that for pure C₆₀. In a high vacuum, the C₆₀·2₈ surface is depleted in sulfur.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2149–2152, December, 1994.     

Structural, textural and photocatalytic properties of quantum-sized In2S3-sensitized Ti-MCM-41 prepared by ion-exchange and sulfidation methods

In₂S₃ nanocrystallites were successfully encapsulated into the mesopores of Ti-MCM-41 by a two-step method involving ion-exchange and sulfidation. The X-ray diffraction (XRD) patterns, UV-vis absorption spectra (UV-Vis), high-resolution transmission electron microscopy (HRTEM) and N₂ adsorption-desorption isotherms were used to characterize the structure of the composite materials. It is found that the diameter of most In₂S₃ nanocrystallites is about 2.5 nm, less than the pore size of Ti-MCM-41. The In₂S₃ nanocrystallites inside the Ti-MCM-41 host show a significant blue-shift in the UV-vis absorption spectra. Under irradiation of visible light (), the composite material has much higher photocatalytic activity for hydrogen evolution than bulk In₂S₃. It can be explained by the effective charge-separation in the quantum-sized In₂S₃-sensitized Ti-MCM-41.     

Magnetic {Mo72Fe30}-embedded hybrid nanocapsules

Magnetic nanocapsules were constructed by fabricating nanometer scaled C₆₀-like “Keplerate” type {Mo₇₂Fe₃₀} with molecular formula [Mo₇₂^VIFe₃₀^IIIO₂₅₂(CH₃COO)₁₂{Mo₂O₇(H₂O)}₂{H₂Mo₂O₈(H₂O)}(H₂O)₉₁]ca.150H₂O into nanocapsule shells using the LbL technique. The morphology of the obtained hybrid nanocapsules was examined by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Shell thickness of the {Mo₇₂Fe₃₀}-embedded nanocapsules can be tailored at the nanometer level more precisely than other nanoparticle-embedded capsules due to the homogeneous diameter and surface charges of {Mo₇₂Fe₃₀}. Interestingly, the {Mo₇₂Fe₃₀}-embedded nanocapsules could be separated and aligned under a circumstance of magnetic field, though {Mo₇₂Fe₃₀} is a paramagnetic molecule. This is the first time to fabricate hybrid magnetic materials containing {Mo₇₂Fe₃₀} using LbL technique. The obtained nanocapsules can be a good candidate for bioseparation as well as targeted delivery.     

The clathrate Ba8CuxGe46−x−y□y: Phase equilibria and crystal structure

Phase relations at 700 °C, 800 °C and solidus temperatures have been derived for the clathrate system Ba₈Cu_xGe_46−x−y□_y via X-ray single crystal and powder diffractometry combined with electron probe micro analysis and differential thermal analysis. The ternary clathrate phase derives from binary Ba₈Ge₄₃□₃ and extends up to x=6. Structure investigations define cubic primitive symmetry with the space group type consistent with a clathrate type I structure throughout the entire homogeneity region 0<x?6 but defect-free Ba₈Cu_xGe_46−x exists for x?5.5.     

Komplexe des zweiwertigen Molybdäns,Derivate des Oktahalodimolybdat(II)-Ions, 4. Mitt.: Darstellungen und Kristallstrukturen von zwei neutralen Komplexen mit 4-Methylpyridin

Mo₂Cl₄ Pic ₄·CHCl₃ (A) (Pic=4-methylpyridine) and Mo₂Br₄ Pic ₄ (B) crystallize in the monoclinic space group.A inC2/c (No. 15) witha=15.175 (4),b=10.847 (2),c=19.946 (6) and =104.52 (2)°;D _o=1.71 (2),D _c =1.72 gcm^–3 forZ=4.B inP2_l/n (No. 14) witha=9.270 (3),b=16.614 (5),c=9.305 (3) and =91.96 (5)°;D _o=2.03 (3),D _c =2.05 gcm^–3 forZ=2.Two halogens and 4-methylpyridines of the MoX ₂ Pic ₂ group are in the trans position. Mo–Mo bond lengths are 2.153 96) forA and 2.150 92) forB. Both molecules are situated on the inversion center resulting in the eclipsed configuration of the ligands around the molybdenum pair. The structure ofB has been refined to the conventionalR factors of 0.08 and 0.098. Disorder on the part of 4-methylpyridines and chloroform molecules stopped the refinement ofA at the endR value of 0.175.Mean Mo–X and Mo–N bonding distances are 2.40 (2), 2.25 (5) forA and 2.53 (3), 2.25 (1) forB.

     

Regio- and stereoselective reactions of a rhodanine derivative with optically active 2-methyl- and 2-phenyloxirane

The reaction of a rhodanine derivative (=(Z)-5-benzylidene-3-phenyl-2-thioxo-1,3-thiazolidin-4-one; 1) with (S)-2-methyloxirane (2) in the presence of SiO₂ in dry CH₂Cl₂ for 10 days led to two diastereoisomeric spirocyclic 1,3-oxathiolanes 3 and 4 with the Me group at C(2) (Scheme 2). The analogous reaction of 1 with (R)-2-phenyloxirane (5) afforded also two diastereoisomeric spirocyclic 1,3-oxathiolanes 6 and 7 bearing the Ph group at C(3) (Scheme 3). The structures of 3, 4, 6, and 7 were confirmed by X-ray crystallography (Figs. 1 and 2). These results show that oxiranes react selectively with the thiocarbonyl group (CS) in 1. Furthermore, the nucleophilic attack of the thiocarbonyl S-atom at the SiO₂-activated oxirane ring proceeds with high regio- and stereoselectivity via an S_N2-type mechanism.     

Preparation and structural study from neutron diffraction data of Pr5Mo3O16

The title compound has been prepared as polycrystalline powder by thermal treatments of mixtures of Pr₆O₁₁ and MoO₂ in air. In the literature, an oxide with a composition Pr₂MoO₆ has been formerly described to present interesting catalytic properties, but its true stoichiometry and crystal structure are reported here for the first time. It is cubic, isostructural with CdTm₄Mo₃O₁₆ (space group Pn-3n, Z=8), with a=11.0897(1) Å. The structure contains MoO₄ tetrahedral units, with Mo-O distances of 1.788(2) Å, fully long-range ordered with PrO₈ polyhedra; in fact it can be considered as a superstructure of fluorite (M₈O₁₆), containing 32 MO₂ fluorite formulae per unit cell, with a lattice parameter related to that of cubic fluorite (a_f=5.5 Å) as a≈2a_f. A bond valence study indicates that Mo exhibits a mixed oxidation state between 5+ and 6+ (perhaps accounting for the excellent catalytic properties). One kind of Pr atoms is trivalent whereas the second presents a mixed Pr³⁺-Pr⁴⁺ oxidation state. The similarity of the XRD pattern with that published for Ce₂MoO₆ suggests that this compound also belongs to the same structural type, with an actual stoichiometry Ce₅Mo₃O₁₆.     

Electrochemistry and electrocatalysis of polyoxometalate-ordered mesoporous carbon modified electrode

In this work, we have developed a convenient and efficient method for the functionalization of ordered mesoporous carbon (OMC) using polyoxometalate H₆P₂Mo₁₈O₆₂·xH₂O (P₂Mo₁₈). By the method, glassy carbon (GC) electrode modified with P₂Mo₁₈ which was immobilized on the channel surface of OMC was prepared and characterized for the first time. The large specific surface area and porous structure of the modified OMC particles result in high heteropolyacid loading, and the P₂Mo₁₈ entrapped in this order matrix is stable. Fourier transform infrared spectroscopy (FTIR), nitrogen adsorption-desorption isotherm and X-ray diffraction (XRD) were employed to give insight into the intermolecular interaction between OMC and P₂Mo₁₈. The electrochemical behavior of the modified electrode was studied in detail, including pH-dependence, stability and so on. The cyclic voltammetry (CV) and amperometry studies demonstrated that P₂Mo₁₈/OMC/GC electrode has high stability, fast response and good electrocatalytic activity for the reduction of nitrite, bromate, idonate, and hydrogen peroxide. The mechanism of catalysis on P₂Mo₁₈/OMC/GC electrode was discussed. Moreover, the development of our approach for OMC functionalization suggests the potential applications in catalysis, molecular electronics and sensors.     

Na3Fe2S4, ein Thioferrat mit gemischt valenter sk∞/1[FeS2]-Kette

Na₃Fe₂S₄ has been prepared from Na₂S, S and Fe. It crystallizes in space group Pnma,a=6.6333 (5) Å,b=10.675 (1) Å,c=10.677 (2) Å,Z=4. The crystal structure, as determined from single crystal four-circle diffractometer data (R=2.8%), consists of sk/1[FeS₂]-chains formed by slightly distorted edge sharing [FeS₄]-tetrahedra, the iron atoms having a formal valency of +2.5. The sodium ions are approximately octahedrally coordinated. Exposed to air, Na₃Fe₂S₄ readily takes up water to form a hydrate by a pertially topochemical reaction.

     

Structural refinement of Nd[Fe(CN)6]·4H2O and study of NdFeO3 obtained by its oxidative thermal decomposition at very low temperatures

The crystal structure of Nd[Fe(CN)₆]·4H₂O has been refined by Rietveld analysis using high resolution synchrotron powder X-ray diffraction data. It belonged to the orthorhombic crystal system, Cmcm space group, with cell parameters: , and . The change in space group from P6₃/m which is observed in the pentahydrates (LnFe(CN)₆·5H₂O) to Cmcm in the tetrahydrates has been analyzed to be a consequence of the change in 9-fold coordination of Nd³⁺ in the pentahydrates to 8-fold coordination in the tetrahydrates, which changes the Nd³⁺ environment from tricapped trigonal prism to a distorted tricapped trigonal prism or square antiprism. Its decomposition process in air to produce NdFeO₃ has been followed by thermogravimetric and differential thermal analysis, IR spectroscopy and laboratory powder XRD. We found that it is possible to synthesize crystalline NdFeO₃ at temperatures as low as 380 °C and refine the structure of single phase crystalline NdFeO₃ synthesized by this method at 600 °C.