Simple and sensitive detection method for chromium(VI) in water using glutathione—capped CdTe quantum dots as fluorescent probes

Water-soluble and stable CdTe quantum dots (QDs) were synthesized in aqueous solution with glutathione (GSH) as the stabilizer. GSH is employed by nature to detoxify heavy metal ions. As a result of specific interaction, the fluorescence intensity of GSH-capped QDs is selectively reduced in the presence of Cr(VI). Under the optimum conditions, the relative fluorescence intensity decreases linearly with the Cr(VI) concentration in the range from 0.01 to 1.00?µg mL^?1, and the detection limit is 0.008?µg mL^?1. The luminescence response of the QDs to ions markedly depended on the particle size, and a new strategy for tuning the selectivity of luminescent QDs to certain ions without changing the capping layer of the QDs can be achieved by changing the crystallite size of the QDs.     

Extractive spectrophotometric determination of tungsten(VI) in alloy steels using ethopropazine hydrochloride.

Ethopropazine hydrochloride (EPH) has been proposed as a sensitive reagent for the spectrophotometric determination of tungsten(VI). The method is based on the formation of a chloroform-soluble yellow-colored ternary complex by the interaction of EPH and thiocyanate with tungsten(V). The complex exhibits the absorption maximum at 404 nm with Sandell's sensitivity value of 20.03 ng cm-2. The complex obeyed Beer's law in the concentration range of 1-15 micrograms ml-1 with an optimum concentration range of 2.3-12.9 micrograms ml-1. The effects of foreign ions in the determination of tungsten(VI) were investigated. The method has also been successfully applied to the analysis of alloy steels.     

Separation and spectrophotometric determination of very low levels of Cr(VI) in water samples by novel pyridine-functionalized mesoporous silica

A modified SBA-15 mesoporous silica was developed, as an adsorbent, for the removal of Cr(VI) ions from natural-water samples. The effects of experimental parameters, including pH of solution, sample and eluent flow rate, the eluent composition, the eluent volume, and the effect of coexisting ions on the separation and determination of Cr(VI), were investigated. It was shown that Cr(VI) was selectively adsorbed from aqueous solution at pH 3, but Cr(III) could be adsorbed from solution at alkaline pH range. The retained Cr(VI) was eluted with 0.5?mol?L^?1 KCl solution in 0.1?mol?L^?1 Na₂CO₃ subsequently. Under the optimum conditions, the modified mesoporous silica (py-SBA-15) with a high pore diameter exhibited an adsorption capacity of 136?mg?g^?1 and a lower limit of detection than 2.3?µg?L^?1 by using diphenylcarbazide as a chromophorous reagent for the determination of Cr(VI) ions. A preconcentration factor as high as 200 was calculated for Cr(VI). The loaded py-SBA-15 can be reactivated with recovery of more than 98.5% over at least eight cycles. The relative standard deviation (RSD) for Cr(VI) ion recovery was less than 1.8%. Validation of the outlined method was performed by analysing a certified reference material (BCR 544). The proposed method was applied to determine Cr(VI) value in natural and waste water samples successfully.     

A fluorescence test for vanadium(V) with resorcinol

Summary In continuation of our previous work in which salicylic acid was reported to give a very sensitive and an almost specific colour reaction with vanadium(V), we have now found that vanadium(V) reacts with resorcinol in 20 N sulphuric or phosphoric acid solution to give a blue coloured product, which gives a vivid red fluorescence under filtered ultraviolet light. A sensitive test for vanadium(V) has now been developed making use of this red fluorescence or of the bright blue colour. Dichromate gives a somewhat less sensitive violet colour with the resorcinol reagent under the same conditions, but the product does not fluoresce. Manganese(VII), cerium(IV), iron(III), titanium(IV), uranium(VI), molybdenum(VI) and tungsten(VI) do not interfere with the colour reaction or the fluorescence test for vanadium(V).     

Determination of Trace Amounts of Vanadium by Kinetic-Catalytic Spectrophotometric Methods

Kinetic-catalytic spectrophotometric methods were proposed for the determination of trace amounts of vanadium element as vanadium（Ⅳ） and/or V（Ⅴ） ions. The vanadium（Ⅳ） as VO^2＋ ion and/or vanadium（Ⅴ） as VO3^- ion showed a catalytic effect on the kinetic reactions between a color reagent such as methylthymol blue （MTB） or SPADNS and bromate in acidic media. The rate of decrease in the absorbance of the reagent MTB at 440 nm or SPADNS at 510 nm was proportional to concentration of V（Ⅳ） and/or V（Ⅴ） ions in the solution. The linear ranges for determination of vanadium were obtained in the range of 1.0-150 and 5.0-100.0 μg/L by the fixed-time and slope methods, respectively, with using MTB as reagent. In the presence of SPADNS as reagent, the calibration curves were made in the amplitude 1.0-200.0 and 5.0-150 μg/L of vanadium ion by the fixed-time and slope methods, respectively. Using fixed-time method, the limits of detection were obtained to be 0.5 and 0.7 μg/L of vanadium in the presence of MTB and SPADNS as reagents, respectively. Detection limits of vanadium by slope method and reagents of SPADNS and MTB were obtained to be 3.5 and 3.8 μg/L of vanadium, respectively. The proposed methods were applied successfully to determination of vanadium in synthetic and real samples.     

Separation,preconcentration and speciation of chromium by solid phase extraction on immobilised ferron

A sensitive and simple method for determination of chromium species after separation and preconcentration by solid phase extraction (SPE) has been developed. For the determination of the total concentration of chromium in solution, Cr(VI) was efficiently reduced to Cr(III) by addition of hydroxylamine and Cr(III) was preconcentrated on a column of immobilised ferron on alumina. The adsorbed analyte was then eluted with 5?mL of hydrochloric acid and was determined by flame atomic absorption spectrometery. The speciation of chromium was affected by first passing the solution through an acidic alumina column which retained Cr(VI) and then Cr(III) was preconcentrated by immobilised ferron column and determined by FAAS. The concentration of Cr(VI) was determined from the difference of concentration of total chromium and Cr(III). The effect of pH, concentration of eluent, flow rate of sample and eluent solution, and foreign ions on the sorption of chromium (III) by immobilised ferron column was investigated. Under the optimised conditions the calibration curve was linear over the range of 2–400?µg?L^?1 for 1000?mL preconcentration volume. The detection limit was 0.32?µg?L^?1, the preconcentration factor was 400, and the relative standard deviation (%RSD) was 1.9% (at 10?µg?L^?1; n?=?7). The method was successfully applied to the determination of chromium species in water samples and total chromium in standard alloys.     

A novel method for determination of protein in human serum utilizing the trihydroxylphenylfluorone-molybdenum(VI) complex as a probe by fluorescence spectrometry

The fluorescence intensity of the trihydroxyl-phenylfluorone-molybdenum(VI) [Mo(VI)] complex is quenched by protein. Based on this, a novel method for protein assay in aqueous solution was developed. With pH 3.75 acetic acid-sodium acetate buffer solution, in the presence of p-octyl polyethylene glycol phenyl ether microemulsion, the quenched fluorescence intensity is proportional to the concentration of bovine serum albumin (BSA) in the range of 0-7.00 microg/mL, and the detection limit of BSA is 5.65 ng/mL. There is no interference from amino acids and most metal ions. The method developed in this paper has been used for the successful determination of protein in human serum.     

Simultaneous voltammetric determination of Mo(VI) and W(VI) by adsorptive differential pulse stripping method using adaptive neuro-fuzzy inference system

An adsorptive differential pulse stripping method is proposed for the simultaneous determination of molybdenum and tungsten based on the formation of their complexes with a novel proton transfer compound, [phenH]⁺[pyzdc]^?, containing both pyrazine-2,3-dicarboxylic acid and 1,10-phenanthroline. The optimum experimental conditions were obtained using 0.052 mM [phenH]⁺[pyzdc]^? ligand, pH 3.3, accumulation potential of ?0.1 V versus Ag/AgCl, accumulation time of 60 s and scan rate of 33.3 mV/s. An adaptive neuro-fuzzy inference system (ANFIS) was utilized for the analysis of the voltammogram data. The detection limits were 4.0 ng/mL for Mo(VI) and 3.0 ng/mL for W(VI). The influence of potential interfering ions on the determination of molybdenum and tungsten was studied. The procedure was applied to the simultaneous determination of molybdenum and tungsten in some water samples.     

A highly sensitive assay for protein using resonance light-scattering technique with dibromohydroxyphenylfluorone-molybdenum(VI) complex

At pH 2.8 and in the presence of 0.090% p-octylpolyethyleneglycol phenylether, the resonance light-scattering (RLS) spectrum of molybdenum(VI) complex with dibromohydroxyphenylfluorone (DBHPF) has a sharp peak at 586 nm. If the micro protein coexists with Mo(VI) and DBHPF, the RLS intensity of the complex at 586 nm is significantly enhanced by protein due to the binding interaction between protein and DBHPF-Mo(VI) complex. Based on this a new assay for protein is described. The dynamic ranges for bovine and human serum albumins are both 0.05-0.75 mg l-1 with detection limits of 13 and 15 ng ml-1, respectively. Besides high sensitivity, the method is characterized by good reproducibility, rapidity of reaction, good stability of chemical system, commonality of spectrofluorometer, few coexisting substances, especially detergents. The determinations of diluted human serum and urine by this method give the results very close to these by the Coomassie brilliant blue G-250 colorimetry, with relative standard deviations of five duplicates of 1.8-2.5%.     

Preconcentration of total chromium on Dowex 50W-X8 resin loaded with 2-amino-benzenethiol

Application of Dowex 50W-X8 loaded with 2-amino-benzenethiol for preconcentration of total chromium (Cr(VI) and Cr(III)) in water samples and subsequent determination by inductively coupled plasma-atomic emission spectrometry was studied. The reagent 2-amino-benzenethiol loaded onto the resin effectively reduced Cr(VI) to Cr(III) and total chromium (both Cr(VI) and Cr(III)) formed chelate complex with the reagent in the Cr(III) valence state. Experimental parameters such as preconcentration time, solution flow rates, pH, and concentration of the eluent were optimized. The method has been applied for the determination of total chromium in seawater samples in the range of 0.1–200?µg?L^?1. A detection limit of 0.3?µg?L^?1 was achieved, and the relative standard deviation was about 5%.     

A novel and selective assay for the quantitative analysis of molybdenum(VI) at nanogram level by resonance light scattering quenching technique

A novel method is designed for the direct determination of trace amounts of molybdenum(VI) in tap water, human hair, and Chinese herbal medicine by means of decreasing resonance light scattering (RLS) technique. The characteristics of RLS spectra, the effective factors, and optimum conditions of the reaction were studied. In the medium of hydrochloric acid (pH 2.38), Mo(VI), dibromohydroxyphenylfluorone (DBHPF), and Triton X-100 react to form a complex, resulting in significant decreasing RLS signals of DBHPF-Triton X-100. The decreasing RLS intensity at 583.0 nm is proportional to the concentration of Mo(VI) up to 8.0 ng mL(-1). The detection limit is 0.013 ng mL(-1). The method is simple, reproducible, with reaction rapidity and stability of complexes formed. Moreover, the high selectivity and sensitivity of this method permits its direct determination of molybdenum(VI) in tap water, human hair, and Chinese herbal medicine and the results are in agreement with those obtained by the inductively coupled plasma atomic emission spectrometry (ICP-AES) method.     

Chromatographic separation of vanadium, tungsten and molybdenum with a liquid anion-exchanger

In acidic solution only molybdenum(VI), tungsten(VI), vanadium(V), niobium(V) and tantalum(V) form stable, anionic complexes with dilute hydrogen peroxide. This fact has been used in developing an analytical method of separating molybdenum(VI), tungsten(VI) and vanadium(V) from other metal ions and from each other. Preliminary investigations using reversed-phase paper chromatography and solvent extraction led to a reversed-phase column Chromatographic separation technique. These metal-peroxy anions are retained by a column containing a liquid anion-exchanger (General Mills Aliquat 336) in a solid support. Then molybdenum(VI), tungsten(VI) and vanadium(V) are selectively eluted with aqueous solutions containing dilute hydrogen peroxide and varying concentrations of sulphuric acid.     

Determination of Selenium by Single-Drop Microextraction and Diffuse Reflectance Infrared Spectroscopy

A simple and convenient assay based on single-drop microextraction with infrared spectroscopy is reported for the determination of selenium. The extraction conditions were carefully optimized and selenium was preconcentrated through single-drop microextraction in 1,2-dichloroethane containing N-hydroxy-N-phenyl-N′-(o-tolyl) benzimidamide. The method is selective and almost all common ions including molybdenum(VI), chromium(VI), and tungsten(VI) did not interfere with the isolation protocol. The selenite band at 875?±?2?cm^?1, which is assigned to the asymmetric vibrational stretch (υ₃), was used for the quantification of selenium. Low limits of detection and quantification of 2.0 and 6.6?µg?L^?1 demonstrate the sensitivity of the method. Good precision was evaluated by the standard deviation (2.0?µg?L^?1) and relative standard deviation (0.5%) for 8?µg?L^?1 was achieved for 10 measurements. The method was used to analyze human blood, urine, and water for selenium.     

Kinetics of reduction of transition metal ions by sodium tetrahydroborate. Reduction of molybdenum(VI) and tungsten(VI)

Summary The kinetics of reduction of molybdenum(VI) and tungsten(VI) ions by NaBH₄ in buffered aqueous solution have been investigated. The reaction rate depends upon the first powers of the concentrations of the reactants. The temperature was varied, and the activation parameters were evaluated. Chemical and spectral evidence for the formation of molybdenum(V) and tungsten(V), as the reaction products, is presented. Plausible mechanistic pathways for these reactions are suggested.     

The Application of Gibberellic Acid to the Determination of Trace Amounts of Lead by Spectrofluorimetry

The ionization constant of fluorescent reagent gibberellic acid (GA) was established spectrophotometrically. The fluorescent reaction of this reagent with lead was studied. Based on this chelation reaction, a sensitive, direct spectrofluorimetric method for the determination of trace lead with use of GA has been developed. The reaction conditions for the fluorescence system of lead with GA were studied. The lead ion can form a stable binary chelate with GA, having a ratio of 1:2 in the pH range 7.0‐8.0. The maximum excitation and emission wavelengths are 205.0 nm and 308.8 nm for the lead chelate, respectively. The reaction is instantaneous and the fluorescence intensity of the lead chelate remains stable from 20 to 150 min. Under the optimal experimental conditions the fluorescence intensity is a linear function of concentration in the range 1.0‐10.0 ng/mL of lead and the detection limit is 0.52 ng/mL of lead. Interferences of other ions were studied. The method has been successfully applied to the determination of lead in common paint.     

Non-Extractive Simultaneous Spectrophotometric Determination of Trace Quantities of Palladium(II) and Tungsten(VI)

A second order derivative spectrophotometric method has been developed for the simultaneous determination of Palladium(II) and Tungsten(VI) using 3,4-dihydroxybenzaldehyde isonicotinoylhydrazone (3,4-DHBINH) as a new complexing agent. The Pd(II) reacts with 3,4-DHBINH in the pH range from 3 to 7 to form green colored solution. The absorbance calibration curves were constructed for palladium(II) at 362 nm (0.53～6.40 μg/ml) and tungsten(VI) at 374 nm (0.92～11.40 μg/ml). The metal ions interfere with each other in determination of zero order as well as the first order spectrophotometry. The optimum condition for maximum color development and other analytical parameters were evaluated. The method was applied successfully for the determination of palladium in hydrogenation catalyst and tungsten in industrial waste water samples.     

钼(Ⅵ)和钨(Ⅵ)的阴离子交换性能研究——草酸-盐酸体系

本文在草酸-盐酸体系中,研究钼、钨等元素在强碱性阴离子交换树脂ZerolitFF上的阴离子交换行为,并确定其分离的最佳条件。用高仅2厘米,直径0.9厘米的交换柱可分离大量钨等元素中的微量钼;其分离比率高达1×10⁴:1。应用于试剂级钨酸钠中钼的分离,结果满意。此外,还确定在该体系中,钼与树脂相进行交换的主要形式为MoO₂(C₂O₄)₂^2-。     

Speciation and determination of chromium ions by dispersive micro solid phase extraction using magnetic graphene oxide followed by flame atomic absorption spectrometry

A selective, simple and fast dispersive micro solid phase extraction method using magnetic graphene oxide (GO) as an efficient sorbent has been developed for the extraction, separation and speciation analysis of chromium ions. The method is based on different adsorption behaviour of Cr(VI) and Cr(III) species onto magnetic GO in aqueous solutions which allowed the selective separation and extraction of Cr(VI) in the pH range of 2.0–3.0. The retained Cr(VI) ions by the sorbent were eluted using 0.5 mL of 0.5 mol L^?1 nitric acid solution in methanol and determined by ?ame atomic absorption spectrometry. Total chromium content was determined after the oxidation of Cr(III) to Cr(VI) by potassium permanganate. All effective parameters on the performance of the extraction process were thoroughly investigated and optimised. Under the optimised conditions, the method exhibited a linear dynamic range of 0.5–50.0 µg L^?1 with a detection limit of 0.1 µg L^?1 and pre-concentration factor of 200. The relative standard deviations of 3.8% and 4.6% (n = 8) were obtained at 25.0 µg L^?1 level of Cr(VI) for intra- and inter-day analysis, respectively. The method was successfully applied to the speciation and determination of Cr(VI) and Cr(III) in environmental water samples.     

Ultraviolet spectrophotometric determination of tungsten(VI) with ammonium 1-pyrrolidinecarbodithioate

A simple and rapid ultraviolet spectrophotometric method is proposed for the determination of trace amounts of tungsten(VI) with ammonium 1-pyrrolidinecarbodithioate (APDC). The method is based on measurement of the absorbance of the tungsten APDC complex in fairly concentrated hydrochloric acid medium; no extraction is required. The complex is formed at an initial acidity of 6M hydrochloric acid and has an absorption maximum at 250 nm. The high absorption of the reagent blank at 250 nm disappears on decomposition of excess of reagent by heating. Beer's law is obeyed over the range 0.43–3.2 ppm of tungsten(VI). The molar absorptivity of the complex is 4.5 × 10⁴ l.mole⁻¹ .cm⁻¹ at 250 nm. Tenfold amounts of aluminium, magnesium, calcium, cobalt, iron(II), lead, silver, sodium and titanium do not interfere in the determination of 50 μg of tungsten (VI).