Atomic Absorption Spectrometry with an Alternating Current Plasma as an Atomization Source

Abstract

The utilization of an alternating current plasma as an atomization source for atomic absorption spectrometry is described. The analytical performance of this technique has been characterized for the determination of 11 elements. The detection limits (3[sgrave]) were found to be comparable to those determined with existing plasma sources. The accuracy of the method has also been assessed by comparison with flame and graphite furnace atomic absorption spectrometric methods.     

Determination of Nickel,Manganese, Copper and Zinc in Blood Serum by Atomic Absorption Spectrometry after Deproteinization by Microwave Irradiation

ABSTRACT

Deproteinization of serum was performed by microwave irradiation combined with a small volume of diluted trichloracetic acid. The procedure reduced the protein level of the samples to less than 99% of the total with a small dilution factor (1+1) and allowed the determination of nickel and manganese by electrothermal atomic absorption spectrometry and copper and zinc by flame atomic absorption spectrometry directly without modifiers or matrix interferences. As metallic ions are normally bonded to serum proteins they must be released during protein precipitation. Spiked serum samples were submitted, before the deproteinization, to an incubation treatment to bond the added ions to the proteins. To check the efficiency of the incubation time for each ion, serum samples were ultrafiltered at set time intervals and the metals determined in the ultrafiltrate. The proposed method was compared with the common deproteinization by acids for the separation of the proteins. The reduction of proteins allowed a small dilution of the sample and the use of faster temperature programmes for the determination of nickel and manganese by electrothermal atomic absorption spectrometry and the aspiration of samples more similar to aqueous standards for copper and zinc determination by flame atomic absorption spectrometry. Recoveries from spiked, incubated and deproteinized samples compared to only diluted samples show that the method can satisfactorily be used for atomic absorption spectrometric determination of these elements.     

Precision and Accuracy Studies of Impaction-Electrothermal Atomization Atomic Spectrometry

Abstract

The precision of aqueous solutions of cadmium, copper, and manganese introduced as an aerosol by an pneumatic nebulizer and electrothermal vaporizer to an impaction-electrothermal atomization atomic absorption spectrometeric system was in the range of 1–3% which was similar to that obtained by manual introduction of similar concentrations of aqueous solutions of cadmium, copper, and manganese to the electrothermal atomizer and atomic absorption spectrometry. The precision of a laboratory air sample was 7.6–9.9%. Accuracy was assessed by comparison to conventional methods of sampling air by collection on a filter followed by digestion of the filter and analysis by flame atomic absorption spectrometry The levels were found to be 59–69% compared to the conventional method.     

Study of Analytical Methods for Iron Determination in Complex Organic Liquids by Atomic Absorption Spectrometry

Abstract

In the determination of iron in complex organic liquids by atomic absorption spectrometry (A. A. S.), methods of sample preparation, such as dilution with an organic solvent and sample pretreatment to destroy organic material, are investigated. Moreover, methods of analysis using calibration curve and standard additions are presented. The possible cause of error associated with iron determination in organic samples by flame (F-A. A. S.) and graphite furnace (GF-A. A. S.) atomic absorption spectrometry are discussed.

From all of these studies, the use of graphite furnace atomic absorption spectrometry after sample dilution with methyl isobutyl ketone, and the use of the method of standard additions are advised for iron determination.     

Developed Method for Spectroscopic Studies of Viscous Samples

Abstract

In this work, the trace elements in phosphoric acid, which has been considered an example of the proposed viscous sample, were measured accurately by a developed method. Samples were diluted to decrease matrix and background interferences. Quantitative analysis of As, Ca, Cd, Cu, Fe, Hg, K, Mg, Na, Pb, and Zn were carried out using flame atomic absorption spectrometry (FAAS). A comparison with inductively coupled plasma-atomic emission spectroscopy (ICP-AES) proves the validity of the developed method. The change of the electronic transition due to diluted of the viscous samples was demonstrated using UV-VIS spectroscopy.     

火焰原子吸收光谱法测定茯苓中微量元素

本文确定了各微量元素火焰原子吸收光谱仪的工作条件,建立了各微量元素线性回归方程.应用火焰原子吸收光谱法测定了天然茯苓和液体发酵茯苓中微量元素含量.研究结果表明二者微量元素含量存在一定的差异,探讨了产生上述差异的原因.     

Determination of Trace Elements in Aerosol Samples Collected on Polycarbonate Filters by Atomic Absorption Spectrometry

Abstract

The multi-element analysis of aerosol samples collected on polycarbonate filters and the wet digestion procedure in open vessel were investigated. The concentrations of Na, K, Ca, Mg and Zn were determined by flame atomic absorption spectrometry with a micro injection system while Cd, Pb, Cu, Ni and V were determined by graphite furnace atomic absorption spectrometry (AAS).

NIES N[ddot] 8 “Vehicle Exhaust Particulate” Certified Reference Material from the Japan Environment Agency was used to study the decomposition of the samples. Different treatments were applied in order to completely dissolve the aerosol samples. It was found that, from all the methods tested, attack with micro-quantities of HNO₃ and HCIO₄ in an air pressure digestion system was the best procedure for the determination of the elements by AAS.

The recommended method was appropriate for all elements and it was applied to real samples. Two nondestructive analytical techniques for the determination of Na, K, Ca, Mg, Zn and Pb have been compared with the proposed method: proton induced X-ray emission (PIXE) and neutron activation analysis (NAA). Results obtained by the application of these three techniques were similar.     

Trace and major element compositions of Black Sea aerosol

Instrumental neutron activation analysis (INAA), flame atomic absorption spectrometry (FAAS), flame atomic emission spectrometry (FAES), graphite furnace atomic absorption spectrometry (GF-AAS), ion chromatography (IC) and visible spectrometry (VIS) were used to determine the composition of atmospheric aerosols, collected at a rural site in the Western Black Sea Coast of Turkey. A total of 354 daily aerosol samples were analyzed for 46 trace and major elements and ions. Sample preparation, quality control procedures, instrumental operating conditions for INAA and source apportionment work is presented.     

微波消解-高分辨连续光源原子吸收光谱法测定锁阳和韭菜籽中的重金属元素含量

利用微波消解-高分辨连续光源原子吸收光谱法测定锁阳、韭菜籽两种中药材中铜(Cu)、铅(Pb)、镉(Cd)、铬(Cr)、砷(As)和汞(Hg)的含量.采用微波消解进行样品前处理,火焰原子吸收法测定其中的Cu含量,石墨炉原子吸收法测定Pb、Cd和Cr含量,氢化物发生原子吸收法测定As、Hg含量.方法线性关系良好,相关系数R^2大于0.999,加标回收率为95.61%~100.1%,RSD为0.8%~3.3%,测得锁阳和韭菜籽中Cu、Pb、Cd、Cr、As和Hg的含量值均低于《药用植物及制剂进口绿色行业标准》和食品安全国家标准《食品中污染物限量》(GB2762-2012)中规定的限量指标.方法分析速率快、干扰少、精密度高,适用于中药材中重金属含量的测定.     

Determination of the Uncertainty of the Flame Atomic Absorption Spectrometer for Copper,Cobalt, Cadmium,and Nickel

Abstract

The sources of uncertainty in the determination of copper, cobalt, cadmium, and nickel, originating from the flame atomic absorption spectrometer, were studied. They were identified and divided in three main groups according to their origin—from the flame, from the light source (hollow-cathode lamp), and from the optics. The combined uncertainty of the flame atomic absorption determination was experimentally determined.     

Atomic Absorption Spectrometry with Thin-Wall Tungsten Tube Atomizer in the Presence of Ammonium Thiocyanate

Abstract

A sensitive atomic absorption spectrometry with a thin-wall tungsten tube atomizer is described. By addition of thiocyanate, sensitivities and detection limits were improved over that of a conventional atomizer for several elements.     

藏药材铁棒锤的微量元素含量分析

目的研究藏药材铁棒锤的微量元素含量。方法使用电感耦合等离子体质谱仪(ICPMS)测定藏药材铁棒锤药材中As、Hg、Pb、Cd含量,使用原子吸收光谱仪(火焰法、石墨炉法)测定药材中Zn、Mn、Cr、Fe、Ca、K、Cu元素的含量并进行分析。结果铁棒锤中有害元素As、Hg、Pb、Cd含量较低,Cu、Fe等有益元素含量较高。结论藏药材铁棒锤有丰富的微量元素,具有较高的开发利用价值。     

Determination of trace elements in lithium niobate crystals by solid sampling and solution-based spectrometry methods

Solid sampling (SS) graphite furnace atomic absorption spectrometry (GFAAS) and solution-based (SB) methods of GFAAS, flame atomic absorption spectrometry (FAAS), inductively coupled plasma optical emission spectrometry (ICP-OES) and inductively coupled plasma mass spectrometry (ICP-MS) were elaborated and/or optimized for the determination of Cr, Fe and Mn trace elements used as dopants in lithium niobate optical crystals.     

Chemometrical Interpretation of Lake Waters after their Chemical Analysis by Using Aas,Flame Photometry and Titrimetric Techniques

This article reports the distribution of trace metals and major ions in lake waters of Sultansazl L < L , a reedfield near Kayseri, Turkey. The determination of elements such as Cr, Ni, Cu, Cd and Pb in lake water samples was performed by AAS after a preconcentration step using a column packed with Amberlite XAD-16 resin. Both flame- and graphite furnace-atomic absorption spectrometry was used to determine these metals in lake water samples. The concentrations of the metals bound to humic substances, and free metal ions were determined after their sorption-elution on the resin, separately. The column method optimized with sodium tetraborate reagent was used in determining the free metal ions. In the determinations of Ca²⁺ and Mg²⁺, K⁺ , and SO2-4 , Cl ^m and total hardness, flame atomic absorption spectrometry, flame photometry, and titrimetry were used, respectively. In order to evaluate the analytical data by multivariate statistical techniques which enable feature reduction and grouping of the pollutant sources in lake waters from their chemical composition, principal component analysis (PCA), cluster analysis (CA) and correlation analysis were used. As a consequence of multivariate statistical evaluation, main anthropogenic sources like traffic, industry and agricultural processes were drawn to be responsible from the pollution in the environment investigated.     

大黄及其不同炮制品中6种元素的含量测定

采用火焰原子吸收光谱法(FAAS)测定了大黄及其不同炮制品中6种元素的含量。结果表明,大黄不同炮制品中这些元素的含量与生品相比均有差异。     

Comparison of tungsten coil electrothermal vaporization and thermospray sample introduction methods for flame furnace atomic absorption spectrometry

Flame furnace atomic absorption spectrometry (FF-AAS) is a newly developed flame atomic absorption spectrometric technique based on arranging a flame furnace onto the top of the flame burner head. In this fundamental investigation, 25 elements were carefully tested by using either thermospray FF-AAS or tungsten coil electrothermal vaporization FF-AAS, of which 15 volatile and semi-volatile elements (Cd, Tl, Ag, Pb, Zn, Hg, Cu, Sb, Bi, Te, In, As, Se, Sn and Au) exhibited better limits of detection compared to those by conventional FAAS; however, non-volatile or refractory elements (Fe, Co, Ni, Cr, Mn, Pd, Pt, Al, Be and V) showed inferior sensitivities by the proposed methods.     

Electrothermal Atomization Atomic Absorption Spectrometry with Platinum Tube Atomizer in Air

Abstract

An electrothermal atomization method of atomic absorption spectrometry using a platinum tube atomizer in air is described. The atomizer consists of 0.025 mm-walled platinum tube and two supports. The remarkable merit of the platinum atomizer is the stability in air, when heated. This paper describes the improved performance for volatile elements like alkalimetals. Detection limits and characteristic mass are calculated for 7 elements and compared with literature values. The platinum atomizer can be used with a simple, effective and relatively low-cost atomic absorption spectrometer for routine in situ analysis.     

Determination of Rare Earth Elements in Natural Water Samples by Rapid Sequential High-Resolution Continuum Source Flame Atomic Absorption Spectrometry (HR CS FAAS) and inductively Coupled Plasma-Mass Spectrometry (ICP-MS)

A method was developed to sequentially assay ten rare earth elements by high-resolution continuum source flame atomic absorption spectrometry. The rare earth elements Nd, Sm, Eu, Tb, Ho, Er, Tm, Yb, Y, and Sc were assayed in environmental water samples which were also analyzed by a reference inductively coupled plasma-mass spectrometry protocol. The samples did not require pretreatment or preconcentration. Interferences for the method were evaluated. Experimental parameters, including the flame composition, burner height, ionization buffers and number of pixels, were optimized. The volume necessary to run measurements in triplicate was only 15?mL per sample. The accuracy, precision and linear range were evaluated. The limits of detection ranged from 0.003 to 0.473?µg mL^?1 for the most sensitive (Yb) to the least sensitive (Tb) element.     

Analysis of degradation processes of C/C composites and coating layers with tracer elements in an air-acetylene flame by two-dimensional atomic absorption spectrometry

This paper describes a novel measurement technique for in-situ monitoring of the degradation processes of coated C/C composites (carbon fiber-reinforced carbon composites) in combusting fields. The samples tested in this experiment were C/C composites with double coating layers of SiC and glass materials doped with Ca and/or Mg as tracer elements. These samples were exposed in an C₂H₂/air flame emitted the diatomic molecules, and the light from the Mg-Ca hollow cathode lamp passed through the flame around the sample. The spectrally and spatially resolved images of emission were observed with a spectro CCD camera developed by our group. In this work, two-dimensional atomic absorption spectrometry by using the spectro CCD camera was applied to in-situ monitor the degradation processes of each coating layer and the substrate. The results indicated that the temporal changes in the spatial distribution of atomic absorption caused by Ca and Mg atoms proved to be a good measure for in-situ monitoring of the degradation processes of coated C/C composites in a high temperature flame.     

Quantitative Untersuchungen von Bauxiten Zentralgriechenlands mittels Atomabsorptionsspektroskopie und Flammenatomemission

Summary A rapid two-part procedure was described for the determination of the elements Al, Fe, Ti, Cr, Ni, V, Mn, Cu, Ag, Au, Ga, Si, Ca, Mg and K in bauxite samples from central Greece. After an NaOH decomposition and an HCl pressure decomposition as well as an aqua regia decomposition carried out in addition, an optimization of the measuring program in time was achieved by constant alternation of atomic absorption spectrometry and atomic flame emission. The elements Ga and Au were measured directly in their extracts using AAS.