13C‐Isotope Labeled Surrogate for Estimating Organophosphorus Pesticides in Agricultural Products by Gas Chromatography‐Mass Spectrometry

¹³C‐isotope labeled paraoxon‐ethyl (¹³C₂‐EP) and deuterium‐labeled paraoxon‐methyl (D₆‐MP) were synthesized and employed as the surrogate (SS) and the internal standard (IS) in organophosphorus pesticides (OPs) spiking agricultural QC samples. The residual amounts of OPs were determined with gas chromatography‐mass spectrometry (GC‐MS) method. The isotope‐labeled compounds used in this study could assist the analysts to estimate the appropriateness and the uncertainties produced by pre‐treatment process. It was found that these isotope labeled compounds could improve the accuracy (10% to 40% of quantitative analysis), and provide efficacious calibration for the spiking recoveries of OPs in some agricultural samples.     

Suppression of analyte signal in inductively-coupled plasma/mass spectrometry and the use of an internal standard

The signal suppression of ⁹Be, ²⁷Al, ⁶⁴Zn, ⁸⁵Rb, ¹¹⁵In and ²⁰⁸Pb in the presence of increasing amounts of sodium chloride is studied. The suppression does not depend significantly on the analyte element considered. The use of ¹¹⁵In as internal standard thus allows correction for the matrix effect. It is shown that the suppressive effect decreases in the order CsCl>NaCl>NH₄Cl. The use of the internal standard also significantly improves the precision. The signal suppression is probably due largely to an increasing number of extracted ions resulting in a more pronounced space-charge effect.     

Stable isotopically labeled internal standards in quantitative bioanalysis using liquid chromatography/mass spectrometry: necessity or not?

It appears to be a general belief that stable isotopically labeled (SIL) internal standards yield better assay performance results for quantitative bioanalytical liquid chromatography/mass spectrometry (LC/MS) assays than does any other internal standard. In this article we describe our experiences with structural analogues and SIL internal standards and their merits and demerits. SIL internal standards are the first choice, but deuterium-labeled compounds may demonstrate unexpected behavior, such as different retention times or recoveries, than the analyte. In addition, a SIL internal standard with identical chemical properties as the analyte may cover up assay problems with stability, recovery, and ion suppression. Since SIL internal standards are not always available or are very expensive, structural analogues can be used, however, with consideration of several issues, which are usually displayed during method validation.     

Trace speciation by HPLC?GF AA for tin- and leadbearing organometallic compounds,with signal increases induced by transition-metal ions

High-performance liquid chromatography coupled with graphite furnace atomic absorption spectroscopy (HPLC? GF AA) gives element-specific detection of environmental samples containing trace amounts of organotin or organolead species. The direct GF AA of organotin and organolead species is subject to errors arising primarily from loss of analyte prior to atomization, probably through the formation of refractory carbides and of compounds or complexes that are volatile at low temperatures. Examples abound in the literature of signal suppression in the GF AA of organometallic species in environmental samples, and several furnace tube modifications have been developed to overcome this suppression. Here, the analyte and a modifier are co-pipetted into a conventional furnace tube, from either a solution of analyte or an HPLC effluent. Oxides of transition metals (e.g. chromium, manganese, or tungsten) are shown to enhance both tin and lead signals, whereas chlorides do not, suggesting the low-temperature formation of relatively involatile metal oxides or volatile metal chlorides, respectively. In the absence of modifier, GF AA signal intensities decrease consecutively for equal quantities of mono-, di-, tri- and tetra-butyltin species, but are nearly equal for the first three in the presence of complexing dichromate (Cr₂O₇^2?). The lesser signal increase for tetrabutyltin indicates a dissimilar low-temperature complexation chemistry for the fully ligated neutral organometal to that for the ligated ions. similar results are demonstrated in post-column addition of a matrix modifier to effluent containing either organotin or organolead species.     

Mass spectral studies towards more reliable measurement of perfluorooctanesulfonic acid and other perfluorinated chemicals (PFCs) in food matrices using liquid chromatography/tandem mass spectrometry

Liquid chromatography/mass spectrometry (LC/MS) experiments are described, leading to a reliable method for the measurement of perfluorooctanesulfonic acid (PFOS) and other perfluorinated chemicals (PFCs) in foods. Separations were performed on new fluorinated stationary phases, RP Octyl (‐C₈F₁₇) or propyl‐perfluorobenzene (‐C₃H₆‐C₆F₅), to ensure resolution of PFOS and interfering taurohydroxycholate isomers. Aqueous ammonium formate (5 mM) and methanol were used as the mobile phases. The mass spectrometer was operated in negative electrospray ionisation mode, recording two transitions for each analyte and one for each internal standard. The purities of the analytical standards for the eleven target perfluoro analytes (C₇ to C₁₂ carboxylic acids, C₄, C₆ and C₈ sulfonic acids, and octanesulfonamide (PFOSA)) were found to be in close agreement with the supplied values; the lowest purity was 91%. Five candidate internal standards were investigated, ¹³C₄‐PFOS, ¹³C₄‐perfluorooctanoic acid, ¹³C₂‐perfluorodecanoic acid, D₉‐n‐ethylperfluorooctanesulfonamidoethanol (D₉‐n‐Et‐FOSE) and D₃‐n‐methylperfluorooctanesulfonamide (D₃‐n‐Me‐FOSA); the purities were all >98%. The use of tetrahydro‐PFOS generated backgrounds (>1 µg/kg) for perfluoroheptanoic acid and perfluorobutanesulfonic acid. Similarly D₉‐n‐Et‐FOSE was unacceptable and D₃‐n‐Me‐FOSA was volatile, leaving no clear candidate for normalisation of the measurement of PFOSA. Severe matrix‐induced suppression and enhancement effects influenced ionisation, making external calibration and quantification problematic. This was addressed by a parallel standard addition and matrix‐matching approach, comparing ionisation in methanol, in procedural blanks and in food‐based extracts. The limits of detection (LODs) of 0.001–0.01 µg/kg in solvent and 0.01–1 µg/kg in foods demonstrate that this method is suitable for the determination of PFCs in all food to the required 1 µg/kg reporting level. © Crown copyright 2009. Reproduced with the permission of Her Majesty's Stationery Office. Published by John Wiley & Sons, Ltd.     

Quantitative MALDI-MS<Superscript><Emphasis Type="Italic">n</Emphasis></Superscript> analysis of cocaine in the autopsied brain of a human cocaine user employing a wide isolation window and internal standards

Detection of drugs in tissue typically requires extensive sample preparation in which the tissue is first homogenized, followed by drug extraction, before the extracts are finally analyzed by LC/MS. Directly analyzing drugs in intact tissue would eliminate any complications introduced by sample pretreatment. A matrix-assisted laser desorption/ionization tandem mass spectrometry (MALDI-MS ⁿ ) method as been developed for the quantification of cocaine present in postmortem brain tissue of a chronic human cocaine user. It is shown that tandem mass spectrometry (MS² and MS³) increase selectivity, which is critical for differentiating analyte ions from background ions such as matrix clusters and endogenous compounds found in brain tissue. It is also shown that the use of internal standards corrects for signal variability during quantitative MALDI, which can be caused by inhomogeneous crystal formation, inconsistent sample preparation, and laser shot-to-shot variability. The MALDI-MS ⁿ method developed allows for a single MS³ experiment that uses a wide isolation window to isolate both analyte and internal standard target ions. This method is shown to provide improved precision [∼10–20 times reduction in percent relative standard deviation (%RSD)] for quantitative analysis compared to using two alternating MS³ experiments that separately isolate the target analyte and internal standard ions.     

Synthesis and application of a novel solid-phase microextraction adsorbent: hollow fiber supported carbon nanotube reinforced sol-gel for determination of phenobarbital

The present study reports the development, validation and application of a new green liquid chromatographic method for the determination of glutathione (GSH) in vegetable samples. In this work we introduce—for the first time—ethyl propiolate (EP) as an advantageous post-column derivatization reagent for thiolic compounds. GSH (t_R = 6.60 min) and N-acetylcysteine (NAC, internal standard) (t_R = 11.80 min) were separated efficiently from matrix endogenous compounds by using a 100% aqueous mobile phase (0.1%, v/v CH₃COOH in 1 mmol L⁻¹ EDTA, Q_V = 0.5 mL min⁻¹) and a Prevail^® reversed phase column that offers the advantage of stable packing material in aqueous mobile phases. The parameters of the post-column reaction (pH, amount concentration of the reagent, flow rates, length of the reaction coil and temperature) were studied. The linear determination range for GSH was 1–200 μmol L⁻¹ and the LOD was 0.1 μmol L⁻¹ (S/N = 3). Total endogenous GSH was determined in broccoli, potato, asparagus and Brussels sprouts using the standards addition approach. The accuracy was evaluated by both recovery experiments (R = 91–110%) and comparison to an o-phthalaldehyde/glycine corroborative post-column derivatization fluorimetric method.     

GC-MS/MS multi-residue method for the determination of organochlorine pesticides,polychlorinated biphenyls and polybrominated diphenyl ethers in human breast tissues

In this work, a multiresidue method for the quantification and confirmation of around 30 organohalogenated compounds in human breast tissue samples has been developed. Analytes tested included organochlorine (OC) (pesticides and polychlorinated biphenyls) and organobromine (OBr) (polybrominated diphenyl ether) compounds. The approach is based on a simple extraction with hexane, followed by a SPE clean-up using silica cartridges and final measurement by GC coupled to triple quadrupole MS. Analyses were performed in both ionizations, electron impact (EI) (selected reaction monitoring (SRM) mode) and negative chemical ionization (NCI) (selected ion recording (SIR) mode). Three isotopically labeled standards were added before extraction and used as surrogates: HCB-¹³C₆, lindane-D₆ and p,p′-DDE-D₈. The method was validated in terms of accuracy, precision, LOQ and LOD and confirmation reliability, using breast tissue spiked at three concentration levels in the range 1–100 ng/g for OC compounds and at two levels 0.1 and 10 ng/g for OBr compounds (0.5 and 50 ng/g for BDE 209). The usefulness of the developed method was tested by the analysis of real human samples, giving as a result the detection of several OC and OBr compounds in different samples analyzed. The acquisition of at least two SRM transitions (in EI) or ions (in NCI) per analyte allowed positive findings to be confirmed by accomplishment of ion ratios between the quantification and the confirmation transitions or ions.     

Glucose and glycerol concentrations and their tracer enrichment measurements using liquid chromatography tandem mass spectrometry

The present study describes a new liquid chromatography tandem mass spectrometry method for high‐throughput quantification of glucose and glycerol in human plasma using stable isotopically labeled internal standards and is suitable for simultaneous measurements of glucose and glycerol enrichments in connection to in vivo metabolic studies investigating glucose turnover and lipolytic rate. Moreover, in order to keep up with this new fast analysis, simple derivatization procedures have been developed. Prior to analysis, glucose and glycerol were derivatized using benzoyl chloride in order to form benzoylated derivatives via new simplified fast procedures. For glucose, two internal standards were evaluated, [U‐¹³C₆]glucose and [U‐¹³C₆, D₇]glucose, and for glycerol, [U‐¹³C₃, D₈]glycerol was used. The method was validated by means of calibration curves, quality control samples, and plasma samples spiked with [6,6‐D₂]glucose, [U‐¹³C₆]glucose, and [1,1,2,3,3‐D₅]glycerol in order to test accuracy, precision, and recovery of the method. Moreover, post preparative and freeze‐thaw sample stability were tested. The correlation of calibration curves for the glucose concentration were r² = 0.9998 for [U‐¹³C₆]glucose and r² = 0.9996 for [U‐¹³C₆, D₇]glucose, and r² = 0.9995 for the glycerol concentration. Interday accuracy for glucose using [U‐¹³C₆]glucose and glycerol determined in spiked plasma were respectively 103.5% and 106.0%, and the coefficients of variation were 2.0% and 9.7%, respectively. After derivatization, plasma samples were stable for at least 14 days. In conclusion, we have developed and validated a novel, accurate, and sensitive high‐throughput liquid chromatography tandem mass spectrometry method for simultaneous determination of glucose and glycerol concentrations and enrichment of infused tracers most commonly used in human metabolic kinetic studies. Copyright © 2014 John Wiley & Sons, Ltd.     

Optimization and development of a high-performance liquid chromatography-based one-site immunometric assay with chemiluminescence detection

Various practical and theoretical considerations were examined in the creation and optimization of a high-performance liquid chromatography (HPLC)-based one-site immunometric assay. This method used an HPLC analyte analog column and post-column chemiluminescence detection. The specific analyte chosen as the model for this study was l-thyroxine (also known as T₄). In this technique, a sample containing thyroxine was first combined with an excess of anti-T₄ antibody Fab fragments that had earlier been conjugated with chemiluminescent acridinium ester labels. After incubation, the mixture was injected onto a column that contained immobilized T₄. The amount of thyroxine in the original sample was then determined by measuring the labeled Fab fragments that appeared in the non-retained fraction, or the decrease in excess Fab fragments that were bound to and later eluted from the column. Items considered in creating this assay included the preparation of acridinium ester-labeled Fab fragments, the detection of these fragments with a post-column reactor, and the creation of a suitable immobilized analog column for capturing excess labeled Fab fragments. The final method could measure T₄ in standards at clinically-relevant concentrations and provided a response within 1.5 min of sample injection, following a 20-45 min incubation with the labeled Fab fragments. Possible applications of this method include its use in clinical chemistry and the screening of proteomic or combinatorial libraries.     

Quantification of the new triketone herbicides, sulcotrione and mesotrione, and other important herbicides and metabolites, at the ng/l level in surface waters using liquid chromatography-tandem mass spectrometry

The LC/ESI/MSMS method allows the trace quantification (ng/l) of the new triketone herbicides, i.e. sulcotrione and mesotrione, and important herbicides and metabolites, in natural waters. Solid phase extraction (SPE) for sample enrichment is performed with OASIS (recoveries 94-112% for parent herbicides). Neutral and acidic compounds were analyzed separately with ESI in positive and negative mode, respectively. Quantification limits varied between 0.5 and 10 ng/l. The acidic herbicides detection was improved by a neutralizing post-column addition solution. The influence of ion suppression on quantification is discussed in detail. It is shown that we could overcome this problem and achieve reliable quantification using isotope labeled internal standards (ILIS) for every single analyte. The methods performance is illustrated with samples from a lake depth profile.     

Comparison of Different Extraction Techniques of Polychlorinated Biphenyls from Sediments Samples

In this work, problems that may occur during determination of trace levels of polychlorinated biphenyls in sediment samples are described. Main error sources are connected with extraction of analytes prior to final determination.

During model studies, polychlorinated biphenyls have been extracted from sediment reference material (METRANAL 2) with the use of different solvents (dichloromethane, hexsane, and toluene); the process has been enhanced by mechanical shaking or ultrasounds. Seven selected PCBs (PCB 28, 52, 101, 118, 138, 153, and 180 – according to IUPAC) were determined in extracts samples by GC–MS technique.

During the studies, two calculation methods were applied to determine the amount of analytes introduced to the chromatographic column. The first approach assumes that the recovery of PCBs that contained a small amount of chlorine atoms in the molecule is similar to the recovery of ¹³C₁₂PCB28 standard, whereas compounds with greater number of chlorine atoms in the molecule will be recovered from the sediment similarly to the recovery of ¹³C₁₂PCB180 standard. The second approach assumes that the recovery of PCB 138 and PCB 153 is similar to the average value of ¹³C₁₂PCB28 and ¹³C₁₂PCB180 standards.

In the case of shaking assisted extraction, 55–90% PCB recoveries were achieved when toluene was used as a solvent, while 71–86% recovery was achieved when dichloromethane was used. When hexsane was used as solvent, recovery ranged 43–107%. In the case of ultrasounds assisted extraction, PCB recoveries of 50–108% were achieved when toluene was used as solvent, while 44–101% recovery was achieved when dichloromethane was applied. When hexsane was used as solvent, recovery reached 57–95%.

Studies have also shown that, when applying different isolation techniques and different solvents, the recovery of applied ¹³C₁₂PCB28 and ¹³C₁₂PCB180 standards is different. Recovery of ¹³C₁₂PCB28 standard was from 5% (for hexane tenfold extraction assisted by shaking) to 57% (for toluene tenfold extraction assisted by shaking). However, recovery of ¹³C₁₂PCB180 standard was from 9% (for hexane tenfold extraction assisted by shaking) to 82% (for toluene tenfold extraction assisted by shaking). This is due to the differences of their binding to the sludge matrix. Standard with a greater number of chlorine atoms in the molecule (¹³C₁₂PCB180) is more weakly associated with sediment than ¹³C₁₂PCB28 standard. In order to improve the accuracy of the results obtained, it is necessary to use labeled PCB compounds.     

HPLC Determination of Colistin in Human Urine Using Alkaline Mobile Phase Combined with Post-Column Derivatization: Validation Using Accuracy Profiles

In this study, the development, validation, and application of a new liquid chromatography post-column derivatization method for the determination of Colistin in human urine samples is demonstrated. Separation of Colistin was performed using a core–shell C₁₈ analytical column in an alkaline medium in order (i) to be compatible with the o-phthalaldehyde-based post-column derivatization reaction and (ii) to obtain better retention of the analyte. The Colistin derivative was detected spectrofluorometrically (λ_ext/λ_em = 340/460 nm) after post-column derivatization with o-phthalaldehyde and N-acetyl cysteine. The post-column derivatization parameters were optimized using the Box–Behnken experimental design, and the method was validated using the total error concept. The β-expectation tolerance intervals did not exceed the acceptance criteria of ±15%, meaning that 95% of future results would be included in the defined bias limits. The limit of detection of the method was adequate corresponding to 100 nmol·L⁻¹. The mean analytical bias (expressed as relative error) in the spiking levels was suitable, being in the range of −2.8 to +2.5% for both compounds with the percentage relative standard deviation lower than 3.4% in all cases. The proposed analytical method was satisfactorily applied to the analysis of the drug in human urine samples.     

Evaluation of online carbon isotope dilution mass spectrometry for the purity assessment of synthetic peptide standards

We present a novel method for the purity assessment of peptide standards which is applicable to any water soluble peptide. The method is based on the online ¹³C isotope dilution approach in which the peptide is separated from its related impurities by liquid chromatography (LC) and the eluent is mixed post-column with a continuous flow of ¹³C-enriched sodium bicarbonate. An online oxidation step using sodium persulfate in acidic media at 99 °C provides quantitative oxidation to ¹²CO₂ and ¹³CO₂ respectively which is extracted to a gaseous phase with the help of a gas permeable membrane. The measurement of the isotope ratio 44/45 in the mass spectrometer allows the construction of the mass flow chromatogram. As the only species that is finally measured in the mass spectrometer is CO₂, the peptide content in the standard can be quantified, on the base of its carbon content, using a generic primary standard such as potassium hydrogen phthalate. The approach was validated by the analysis of a reference material (NIST 8327), and applied to the quantification of two commercial synthetic peptide standards. In that case, the results obtained were compared with those obtained using alternative methods, such as amino acid analysis and ICP-MS. The results obtained proved the value of the method for the fast, accurate and precise mass purity assignment of synthetic peptide standards.     

Determination of organic micro-pollutants such as personal care products, plasticizers and flame retardants in sludge

In this study, a method for the determination of organic micro-pollutants, i.e. personal care products such as synthetic musk fragrances, household bactericides, organophosphate flame retardants and plasticizers, as well as phthalates in sludge, has been developed. This method is based on lyophilisation and accelerated solvent extraction followed by clean-up steps, i.e. solid phase extraction and size exclusion chromatography. The determination is performed by gas chromatography coupled to mass spectrometry. Stable isotope-labelled compounds such as musk xylene (MX D₁₅), tri-n-butylphosphate (TnBP D₂₇) and triphenylphosphate (TPP D₁₅) were used as internal standards. Recovery rates were determined to be 36–114% (with typical relative standard deviation of 5% to 23%) for the target compounds. The limit of detection was 3–30 ng g⁻¹, and the limit of quantification was 10–100 ng g⁻¹ dry matter.     

Extraction of fullerenes from environmental matrices as affected by solvent characteristics and analyte concentration

Fullerenes possess unique chemical properties that make the isolation of these compounds from heterogeneous environmental matrices difficult. For example, previous reports indicate that toluene‐based extraction techniques vary in their ability to extract C₆₀, especially from highly carbonaceous solid matrices. Here, we examined the effects of (i) solvent type (toluene alone versus an 80:20 v/v mixture of toluene and 1‐methylnaphthalene) and (ii) analyte concentration on the extraction efficiency of an isotopically labeled surrogate compound, ¹³C₆₀. The toluene/1‐methylnaphthalene mixture increased fullerene extraction efficiency from carbon lampblack by a factor of five, but was not significantly different from 100% toluene when applied to wood stove soot or montmorillonite. Recovery of the ¹³C₆₀ surrogate declined with decreasing analyte concentration. The usefulness of isotopically labeled surrogate is demonstrated and the study provides a quantitative assessment regarding the dependence of fullerene extraction efficiencies on the geochemical characteristics of solid matrices.     

Evaluation of the matrix‐like effect in multiresidue pesticide analysis by gas chromatography with tandem mass spectrometry

In multiresidue pesticide analysis using gas chromatography, it has long been recognized that an increase in the number of pesticides present in a standard solution can result in an enhancement of the peak responses of certain pesticides. Despite being widely acknowledged, this phenomenon has been rarely studied and is poorly understood. In this study, the authors have tentatively called this phenomenon the “matrix‐like effect” and demonstrated it clearly using gas chromatography with tandem mass spectrometry. Five selected pesticides, namely, omethoate, terbufos, malathion, procymidone, and permethrin, and four internal standard candidates, namely, triphenyl phosphate, naphthalene‐d ₈, phenanthrene‐d ₁₀, and fluoranthene‐d ₁₀, were used to evaluate the matrix‐like effect following the addition of 58, 108, and 166 other pesticides. With the exception of naphthalene‐d ₈, the responses of all evaluated pesticides and internal standard candidates were dramatically enhanced by the addition of up to 166 coexisting pesticides. The relative response factors of the five pesticides to each internal standard candidate were not constant under the conditions studied, meaning that these internal standard candidates did not adequately compensate for the matrix‐like effect, at least for the five evaluated pesticides. The results revealed that the presence of various mixtures of pesticides in standard solutions might act as an unintentional analyte protectant, that is, some sort of troublesome “quasi‐matrix.”     

Sensitive and rapid simultaneous quantitation of leucovorin and its major active metabolite 5-methyl-tetrahydrofolate in human plasma using a liquid chromatography coupled with triple quadruple mass spectrometry

Bioanalysis of an endogenous compound such as leucovorin is never an easy task on a liquid chromatography tandem mass spectrometer (LC–MSMS). Unless it is necessary, regulatory guidance discourages working with surrogate matrices for calibration curve standard preparation. Herein, a selective and sensitive liquid chromatography–tandem mass spectrometry method for simultaneous determination of leucovorin and 5-methyl tetrahydrofolic acid in human plasma was developed and validated. Stable labeled internal standards, i.e. leucovorin D₄ and 5- methyl tetrahydrofolic acid ¹³C₅, were used as internal standards to track and compensate the parent compounds during processing and extraction from plasma. The method involves a rapid solid-phase extraction from plasma followed by reverse-phase gradient chromatography and mass spectrometry detection with a total run time of 5 min. The method was developed and validated from 5 to 2,202 ng/ml for leucovorin and from 5 to 1,300 ng/ml for 5-methyl tetrahydrofolic acid. The mean recoveries for leucovorin and 5-methyl tetrahydrofolic acid were 100.4 and 100.9% respectively. The validated method enabled the simultaneous analysis of leucovorin and 5-methyl tetrahydrofolic acid in samples from clinical pharmacokinetic studies of leucovorin. The peak concentrations of leucovorin and 5-methyl tetrahydrofolic acid were 651–883 and 518–635 ng/ml, respectively, in fasted and fed conditions. The terminal half-life values for leucovorin and 5-methyl tetrahydrofolic acid were 9.3–10.5 and 9.2–17.6 h, respectively.     

Matrix effect in high‐performance liquid chromatography‐tandem mass spectrometry analysis of antibiotics in environmental water samples

This paper describes the matrix effect during the analysis of ten antibiotic compounds in water by SPE followed by HPLC‐ESI‐MS/MS. The target analytes were tetracycline, oxytetracycline (tetracyclines), sulfathiazole, sulfamethazine, sulfadiazine (sulfonamides), erythromycin‐H₂O, roxithromycine, spiramycin (macrolides), ofloxacin, and norfloxacin (quinolones). The matrix effect was examined for internal standards and the target analytes in five different water matrixes, with signal suppression being increased in the order: ultrapure water, tap water, river water, sewage effluent, and sewage influent. A combined application of the internal standards and matrix‐matched extract calibration was shown to be successful in compensating the matrix effect for the analytes. The procedural recovery of the target compounds in sewage effluents and influents was higher than in river water samples, which was further enhanced by sample acidification to pH 2. The validity of the internal standard based matrix‐matched calibration approach was verified by the standard addition method.     

Measurement of 4-nonylphenol and 4-tert-octylphenol in human urine by column-switching liquid chromatography-mass spectrometry

We report a method for determining 4-nonylphenol (NP) and 4-tert-octylphenol (OP) levels in human urine samples by column-switching liquid chromatography-electrospray mass spectrometry after enzymatic deglucuronidation. The method involves enzymatic deconjugation by β-glucuronidase and correction by the stable isotopically labeled internal standard, 4-(1-methyl)octylphenol-d₅. The compounds were separated by reversed-phase chromatography with a C₁₈ column, and detected by selected ion monitoring in the negative mode. After adding an internal standard to urine samples, a direct analysis was carried out. The average recoveries of OP and NP were above 85.0% with correction using the added internal standard. The quantitation limit in the urine samples was 0.3 ng ml⁻¹. The method enables the precise determination of standards and may be applied to the detection of trace amounts of OP and NP in human urine samples.