Preparation of Nano‐bismuth with Different Particle Sizes and the Size Dependent Electrochemical Thermodynamics

Nano‐bismuth has excellent electrochemical properties. However, it is still unclear how the particle size of nano‐bismuth influences its electrochemical thermodynamic properties. In this paper, spherical bismuth nanoparticles with different particle sizes were prepared by solvothermal method; the electrode potentials, the temperature coefficients of the electrode potentials and the thermodynamic functions of reaction for nano‐bismuth electrodes with different particle sizes at different temperatures were determined; and the effects of particle size on the electrode potential, the temperature coefficient and the thermodynamic functions were discussed. The experimental results show that particle size of bismuth nanoparticles has a significant influences on the electrochemical thermodynamic properties. The standard electrode potential of the nano‐bismuth electrode with a diameter of 39.9 nm was 0.009 V lower than that of the ordinary standard electrode (0.308 V); the temperature coefficient of the electrode potential with a diameter of 39.9 nm was nearly double that of 85.9 nm. With the particle sizes decrease, the standard molar Gibbs energy of reaction, the standard molar enthalpy of reaction, the standard molar entropy of reaction, the molar reversible reaction heat and the temperature coefficient increase; and these quantities are linearly related to the reciprocal of the particle diameter.     

Differential pulse voltammetric determination of selected nitrophenols on novel type of porous silver working electrode prepared by powder metallurgy

Nitrophenols are important environmental pollutants and their monitoring is important because of their genotoxic and ecotoxic properties. Easy electrochemical reduction of nitro groups can be used for their voltammetric determination using mercury based electrodes. However, requirements of green analytical chemistry prompted us to investigate a novel type of silver porous electrode (AgPE) prepared by powder metallurgy compatible with both “green” and “white” analytical chemistry requirements. In this paper, AgPE was for the first time successfully used for differential pulse voltammetric determination of micromolar concentrations of 2-nitrophenol (NP), 2,4-dinitrophenol (DNP), and 2,4,6-trinitrophenol (TNP) in aqueous media. The main advantage of the novel method is the possibility to use small sample volume (down to 25 μL) and to work in the presence of oxygen when using supporting electrolyte of pH 3. This advantage partially compensates the fact that the obtained sensitivity and limit of detection are not better than with the previously investigated electrodes.     

Electroanalysis of dopamine at a gold electrode modified with N-acetylcysteine self-assembled monolayer

Voltammetric behavior of dopamine (DA) on a gold electrode modified with the self-assembled monolayer (SAM) of N-acetylcysteine has been investigated, and one pair of well-defined redox peaks of dopamine is obtained at the SAM modified gold electrode. The oxidation peak current increases linearly with the concentration of dopamine in the range of  mol l⁻¹. The detection limit is 8.0×10⁻⁷ mol l⁻¹. This method will be applicable to the determination of dopamine in injection of dopamine hydrochloride, and the good recovery of dopamine is obtained. Furthermore, The SAM modified gold electrode can resolve well the voltammetric responses of dopamine and ascorbic acid (AA), so it can also be applied to the determination of dopamine in the presence of ascorbic acid.     

复合铋膜电极阳极溶出法测定水样中的痕量铟

在玻碳电极上采用电化学沉积法制备了新型铕离子掺杂普鲁士蓝复合铋膜电极,建立了用示差脉冲阳极溶出法测定环境水样中痕量铟的分析方法。讨论了铟在常规铋膜电极和复合铋膜电极上的溶出性能,对铋膜的厚度、支持电解质、测定底液的pH、富集时间和富集电位等参数进行了优化。在最佳实验条件下,铟的阳极溶出峰电流与其浓度在2~20μg/L和20~100μg/L范围内分别呈良好的线性关系,检测下限为0.15μg/L(S/N=3),相对标准偏差RSD2.0%。该法用于实际水样中痕量铟的测定,样品回收率为97.5%~103%。     

Electroanalysis of myoglobin and hemoglobin with a boron-doped diamond electrode

The electrochemical behavior of myoglobin (Mb) and hemoglobin (Hb) was investigated with a boron-doped diamond (BDD) electrode by cyclic voltammetry. In acetate buffer solutions, the oxygen reduction at the BDD electrode showed a very high overpotential while the reduction of Mb or Hb was observed in the more positive potential region. Owing to the electrocatalytic reaction of O₂ and the participation of H⁺ following the electrochemical reduction of ferric proteins, the voltammetric responses for Mb and Hb on the BDD electrode in the negative going scans became remarkable in acidic buffer solutions in air. The peak current was linearly proportional to the concentration of Mb in the range 1×10⁻⁶–2×10⁻⁵ M or the concentration of Hb from 1×10⁻⁶ to 1×10⁻⁵ M.     

Alpha-glucosidase based bismuth film electrode for inhibitor detection

A biosensing system based on α-glucosidase (AG) activity was developed by using bismuth film modified glassy carbon electrode (BiFE). AG enzyme was immobilized on the BiFE by means of gelatin membrane and the activity was measured by the following of liberated 4-nitrophenol from the 4-nitrophenyl-α-d-glucopyranoside (PNPGP) which is the synthetic substrate of the enzyme at the working potential of −950 mV. The proposed system was used as an AG based biosensing system. Experimental data showed that the response current of 4-nitrophenol obtained at the BiFE was linear in concentration range between 0.033 and 0.33 mM of PNPGP. Before examining the analytical characteristics, pH optimization of the AG-biosensor was also performed. Furthermore, the proposed method was applied to analyze two different AG inhibitors (Amaryl and Acorbose) which are important in Noninsulin-dependent diabetes mellitus (NIDDM).     

Electrochemical evaluation of the desloratadine at bismuth film electrode in the presence of cationic surfactant: Highly sensitive determination in pharmaceuticals and human urine by Linear sweep-cathodic stripping voltammetry

In this study, the electrochemical properties of desloratadine, which is in the second generation antihistamines group, were determined by bismuth film electrode (BiFE) in aqueous and aqueous/surfactant solutions. This compound gave an irreversible and diffusion-controlled reduction peak at about –1.65 V by cyclic voltammetry. It was found that the addition of cationic surfactants (cetyltrimethylammonium bromide (CTAB) increased the reduction current signal of desloratadine, while anionic (sodium dodecylsulfate (SDS) and nonionic (Tween 80) surfactants were found to have an adverse effect. Using linear sweep-cathodic stripping voltammetry, the analytical signal showed a linear correlation with a concentration of 0.1 to 4 µM in 0.04 M Britton–Robinson solution (pH = 8.0) in the presence of 5 mM CTAB, while the detection limit was calculated to be 11.70 nM (3.64 μgL^–1). This method has been successfully applied for the quantitation of desloratadine in pharmaceutical and urine samples without the need for any separation.     

Electroanalysis of some common pesticides using conducting polymer/multiwalled carbon nanotubes modified glassy carbon electrode

The cyclic voltammetric behaviour of three common pesticides such as isoproturon (ISO), voltage (VOL) and dicofol (DCF) was investigated at glassy carbon electrode (GCE), multiwalled carbon nanotubes modified GCE (MWCNTs/GCE), polyaniline (PANI) and polypyrrole (PPY) deposited MWCNT/GCE. The modified electrode film was characterized by scanning electron microscopy (SEM) and X-ray diffraction analysis (XRD). The electroactive behaviour of the pesticides was realized from the cyclic voltammetric studies. The differential pulse voltammetric principle was used to analyze the above-mentioned pesticides using MWCNT/GCE, PANI/MWCNT/GCE and PPY/MWCNT/GCE. Effects of accumulation potential, accumulation time, Initial scan potential, amplitude and pulse width were examined for the optimization of stripping conditions. The PANI/MWCNT/GCE performed well among the three electrode systems and the determination range obtained was 0.01-100 mgL(-1) for ISO, VOL and DCF respectively. The limit of detection (LOD) was 0.1 microgL(-1) for ISO, 0.01 microgL(-1) for VOL and 0.05 microgL(-1) for DCF on PANI/MWCNT/GCE modified system. It is significant to note that the PANI/MWCNT/GCE modified system results in the lowest LOD in comparison with the earlier reports. Suitability of this method for the trace determination of pesticide in spiked samples was also realized.     

Individual and simultaneous determination of lead, cadmium, and zinc by anodic stripping voltammetry at a bismuth bulk electrode

A bismuth bulk electrode (BiBE) has been investigated as an alternative electrode for the anodic stripping voltammetric (ASV) analysis of Pb(II), Cd(II), and Zn(II). The BiBE, which is fabricated in-house, shows results comparable to those of similar analyses at other Bi-based electrodes. Metal accumulation is achieved by holding the electrode potential at −1.4 V (vs. Ag/AgCl) for 180 s followed by a square wave voltammetric stripping scan from −1.4 to −0.35 V. Calibration plots are obtained for all three metals, individually and simultaneously, in the10-100 μg L⁻¹ range, with a detection limit of 93, 54, and 396 ng L⁻¹ for Pb(II), Cd(II), Zn(II), respectively. A slight reduction in slope is observed for Cd(II) and Pb(II) when the three metals are calibrated simultaneously vs. individually. Comparing the sensitivities of the metals when calibrated individually vs. in a mixture reveals that Zn(II) is not affected by stripping in a mixture. However, Pb(II) and Cd(II) have decreasing sensitivities in a mixture. The optimized method has been successfully used to test contaminated river water by standard addition. The results demonstrate the ability of the BiBE as an alternative electrode material in heavy metal analysis.     

Adsorptive stripping voltammetry of nickel with 1-nitroso-2-napthol using a bismuth film electrode

A sensitive procedure is presented for the voltammetric determination of nickel. The procedure involves an adsorptive accumulation of nickel 1-nitroso-2-napthol (NN) complex on a bismuth film electrode prepared ex situ by electrodeposition. The most suitable operating conditions and parameters such as pH, ligand concentration (C_NN), adsorptive potential (E_ads), adsorptive time (t_ads), scan rate and others were selected and the determination of nickel in aqueous solutions using the standard addition method was possible. The adsorbed Ni-NN complex gives a well defined cathodic stripping peak current at −0.70 V, which was used for the determination of nickel in the concentration range of 10.0-70.0 μg L⁻¹ (pH 7.5; C_NN 6.5 μmol L⁻¹; E_ads −0.30 V; t_ads 60 s) with a detection limit of 0.1 μg L⁻¹. The relative standard deviation for a solution containing 10.0 μg L⁻¹ of Ni(II) was 3.5% (n = 4). The proposed method was validated determining Ni(II) in certified reference waste water (SPS-WW1) and Certified Reference Water for Trace Elements (TMDA 51.3) with satisfactory results. Then lake water samples were analyzed.     

微波消解-铋膜修饰电极阳极溶出法测定大米中镉

建立了大米中Cd的微波消解壤膜电极阳极溶出伏安快速测定方法.在0.2 mol/L HAc-NaAc缓冲溶液(pH 4.0)中,Cd(Ⅱ)在-650mV附近出现一灵敏的溶出峰,其质量浓度在1～360 μg/L范围内与峰高成正比,检出限可达0.05 μg/L,回收率为93.5％～106.3％;本法已用于大米中Cd的测定,并...     

Determination of trace amounts of lead and cadmium using a bismuth/glassy carbon composite electrode

We examined the use of a bismuth-glassy carbon (Bi/C) composite electrode for the determination of trace amounts of lead and cadmium. Incorporated bismuth powder in the composite electrode was electrochemically dissolved in 0.1 M acetate buffer (pH 4.5) where nanosized bismuth particles were deposited on the glassy carbon at the reduction potential. The anodic stripping voltammetry on the Bi/C composite electrode exhibited well-defined, sharp and undistorted peaks with a favorable resolution for lead and cadmium. Comparing a non-oxidized Bi/C composite electrode with an in-situ plated bismuth film electrode, the Bi/C composite electrode exhibited superior performance due to its much larger surface area. The limit of detection was 0.41 μg/L for lead and 0.49 μg/L for cadmium. Based on this study, we are able to conclude that various types of composite electrodes for electroanalytical applications can be developed with a prudent combination of electrode materials.     

Electroanalysis in flowing systems – the propagation of depletion effects downstream of a channel micro-band electrode

Analytical and numerical methods are used to establish concentration distributions around channel microband electrodes both in isolation and as part of multi-electrode arrays. The importance of axial diffusion in addition to convection and diffusion normal to the electrode surface is stressed. In particular, downstream depletion effects are shown to occur over many electrode lengths, so that the diffusion fields of electrodes within arrays overlap and interfere. A simple analytical expression is derived to describe this depletion and permits the design of practical arrays in which electrodes operate essentially independently of each other.     

Validation of bismuth film electrode for determination of cobalt and cadmium in soil extracts using ICP-MS

A study is presented on the use of the bismuth film electrode (BiFE) operated in the anodic stripping and the cathodic adsorptive stripping voltammetry (ASV, CAdSV) modes, for the determination of two trace heavy metals (Cd and Co, respectively), in soil extract samples. Two types of BiFE were examined in this study: the in situ prepared BiFE, which was employed in ASV determination of Cd, and the ex situ prepared BiFE, which was used in CAdSV of Co with dimethylglyoxime (DMG) as complexing agent. A series of unpretreated soil extracts with varying Cd and Co concentrations were analyzed, and the results obtained compared to those determined using inductively coupled plasma-mass spectrometry (ICP-MS). The results revealed the suitability of stripping analysis at the BiFE for determination of μg l⁻¹ levels of heavy metals in soil extracts. The promising results obtained here, coupled with the non-toxic nature of bismuth (in comparison to commonly used mercury electrodes employed in stripping analysis), offer great promise in centralized and decentralized analysis of trace heavy metals in complex environmental matrices.     

Electroanalysis of sulfonamides by flow injection system/high-performance liquid chromatography coupled with amperometric detection using boron-doped diamond electrode

Sulfonamides (SAs) were electrochemically investigated using cyclic voltammetry at a boron-doped diamond (BDD) electrode. Comparison experiments were carried out using a glassy carbon electrode. The BDD electrode provided well-resolved oxidation, irreversible cyclic voltammograms and higher current signals when compared to the glassy carbon electrode. Results obtained from using the BDD electrode in a flow injection system coupled with amperometric detection were illustrated. The optimum potential from a hydrodynamic voltammogram was found to be 1100 mV versus Ag/AgCl, which was chosen for the HPLC-amperometric system. Excellent results of linear range and detection limit were obtained. This method was also used for determination of sulfonamides in egg samples. The standard solutions of 5, 10, and 15 ppm were spiked in a real sample, and percentage of recoveries was found to be between 90.0 and 107.7.     

Determination of pesticides using heteropolyacid montmorillonite clay-modified electrode with surfactant

Redox behavior of three pesticides, namely isoproturon, carbendazim and methyl parathion was investigated electrochemically using hetropolyacid montmorillonite clay-modified glassy carbon electrode in the presence and absence of a surfactant, cetyl trimethyl ammonium bromide. A solution of 0.1 M H₂SO₄ in 50% aqueous alcohol (pH 1.0) was found to be suitable medium for electroanalysis. Isoproturon exhibited one well-defined oxidation peak around 1.2 V along with one more oxidation and reduction peaks. Carbendazim showed only one well-defined anodic peak around 1.4 V. Methyl parathion exhibited one well-defined reduction peak around −0.26 V and the oxidation peak appeared around 0.510 V. In the second cycle, a new cathodic peak was found around 0.420 V. The presence of surfactant enhanced the peak current and hence stripping voltammetric determination procedures for all the three pesticides were developed. Square wave stripping mode was employed and the maximum current experimental conditions were arrived at. Calibration plot was made for all the three pesticides. The determination limit and standard deviations were arrived at. The applicability of the method was also verified in a soil sample and water analyte.     

Catalytic adsorptive stripping determination of trace chromium (VI) at the bismuth film electrode

A sensitive adsorptive stripping voltammetric protocol at a bismuth-coated glassy-carbon electrode for trace measurements of chromium (VI) in the presence of diethylenetriammine pentaacetic acid (DTPA) is described. The new protocol is based on accumulation of the Cr-DTPA complex at a preplated bismuth film electrode held at −0.80 V, followed by a negatively-going square-wave voltammetric waveform. Factors influencing the stripping performance including the film preparation, solution pH, DTPA and nitrate concentrations, deposition potential and deposition time, have been optimized. The resulting performance compares well with that observed for analogous measurements at mercury film electrodes. A preconcentration time of 7 min results in a detection limit of 0.3 nM Cr(VI) and after 2 min a relative standard deviation at 20 nM of 5.1% (n = 25). Applicability to river water samples is demonstrated. The attractive behavior of the new “mercury-free” chromium sensor holds great promise for on-site environmental and industrial monitoring of chromium (VI). Preliminary data in this direction using bismuth-coated screen-printed electrodes are encouraging.     

多巴胺在DTNB自组装膜上的电催化研究

在金电极表面制备了DTNB(5,5′ Di thiobis(2 nitrobenzoicacid))自组装单分子层膜(DTNB/AuSAM)。多巴胺在DTNB自组装膜上有一对可逆性良好的氧化还原峰,其氧化峰电流与多巴胺的浓度在5.0×10-6mol/L～1.0×10-4mol/L的范围内呈线性关系,检出限为1.0×10-6mol/L。在pH3.5的缓冲溶液中,在DTNB自组装膜上多巴胺和抗坏血酸的电化学响应可以明显区分,氧化峰电位分离达276mV。可用于抗坏血酸存在下多巴胺的检测。测定了盐酸多巴胺注射液中多巴胺的含量,其平均回收率为104%。     

Carboncarbon bond formation using bismuth in a water medium

In the presence of bismuth and ammonium chloride, allyl halides were found to react with aldehydes in a water medium at room temperature to give the corresponding homoallylic alcohols.