A sensitive chromatographic determination of hydrazines by naphthalene-2,3-dialdehyde derivatization

A new high-performance liquid chromatography (HPLC) method for the sensitive simultaneous determination of hydrazine (Hy), monomethylhydrazine (MMH) and 1,1-dimethylhydrazine (UDMH) based upon the derivatization of hydrazines with naphthalene-2,3-dialdehyde and the separation of the derivatives on Zorbax Eclipse AAA column in a single chromatographic run under acidic conditions (pH 2.4) was developed. Hydrazine and monomethylhydrazine derivatives were found to be strongly fluorescent at λ_ex?=?273?nm, λ_em?=?500?nm. It was shown that UDMH derivative can be detected as non-fluorescent hydrazone at 290?nm by UV-detection. Limits of detection were 0.05?µg?·?L^?1 for Hy and MMH, and 1?µg?·?L^?1 for UDMH for the injection volume of 100?µL. The method was validated for water sample analysis. It proved to be selective, accurate and precise with the supplementary advantage of the simple and rapid sample preparation.     

Determination of hydrazines by chip electrophoresis with contactless conductivity detection

In this report, a new approach for the fast determination of hydrazine compounds (hy) in complex matrices is presented. The experimental protocol is based on poly(methylmethacrylate) (PMMA) microchip separations with contactless conductivity detection using a compact portable device, which integrates all separation and detection components. Three hy (hydrozine (Hy), methylhydrazine (MH), and 1,1-dimethylhydrazine (UDMH)) were separated within < 30 s at a separation voltage of 3.8 kV using a L(-)-histidine/2-(N-morpholinoethanesulfonic acid) (His/MES) buffer (25:50 mM, pH 5.87). The contactless conductivity detection enables detection limits for Hy, MH, and UDMH of 11.9, 35.5, and 337.8 ng/mL, respectively, with linear concentration dependence up to 10 μg/mL. In complex matrices such as soil samples or river water, interferences were eliminated by implementing ultrasound-assisted headspace single-drop microextraction of hy under strongly alkaline conditions, using an aqueous drop of His/MES buffer as the extractant phase. The incorporation of this miniaturized sample preparation step led to improved limits of detection for Hy, MH, and UDMH of 6.5, 15.3, and 11.4 ng/mL, respectively. The overall protocol demonstrates a promising approach for interfacing chip electrophoresis with real-world applications.     

Application of liquid phase microextraction based on solidification of floating organic drop for the determination of triazine herbicides in soil samples by gas chromatography with flame photometric detection

A simple and efficient liquid phase microextraction based on solidification of floating organic drop coupled with gas chromatography–flame photometric detection was developed for the extraction and determination of some triazine herbicides (metribuzin, simetryn, ametryn and prometryn) in soil samples. The type and volume of the extraction solvent, sample solution temperature, salt addition, stirring rate, and the extraction time were optimized. Under the optimal conditions, the linear response was observed over the range of 10–2000?µg?kg^?1 for metribuzin and 2–500?µg?kg^?1 for simetryn, ametryn, and prometryn, respectively, with the correlation coefficients (r) varying from 0.9990 to 0.9992. The limits of detection were in the range between 0.2 and 1.0?µg?kg^?1 (S/N?=?3?:?1). The recoveries of the target analytes for the spiked soil samples ranged from 75.5% to 97.3%, with the relative standard deviation values less than 7.2% (n?=?5). The enrichment factors were achieved ranging from 122 to 336. The developed method was applied for the preconcentration and determination of triazine herbicides in real soil samples and a satisfactory result was obtained.     

Determination of 41 polybrominated diphenyl ethers in soil using a pressurised solvent extraction and GC-NCI-MS method

A rapid and reliable analytical method based on pressurised solvent extraction (PSE) and GC-NCI-MS was developed for the determination of 41 different PBDEs in soil. All PBDEs, including mono- to hepta-BDEs (sum of 39 congeners), one nona-BDE and deca-BDE, were efficiently extracted from soil samples using the extraction technology of PSE. The extract was then cleaned up on a florisil column. Satisfactory separation of 41 PBDE congeners was obtained on a 15-m DB-5MS capillary column, saving the use of another 30-m column specific for the separation of mono- to hepta-BDEs. PBDEs were identified and quantified by GC-MS in negative chemical ionisation (NCI) mode, and further confirmed in semi electron impact (SEI) mode when the ion source was also NCI. The method detection limits ranged from 0.01 to 0.03?ng?g^?1?dw for mono- to hepta-BDEs, 1.43?ng?g^?1?dw for the nona-BDE and 0.20?ng?g^?1?dw for deca-BDE. The applicability of the method was tested in soil samples collected from an e-waste recycling site at Guiyu. Twenty-one PBDEs (mono- to deca-) were detected, and eighteen congeners were quantified. The concentration range of PBDEs was 0.78–436?ng?g^?1?dw. BDE-47, BDE-99, BDE-153, BDE-183, BDE-206 and BDE-209 were the dominant congeners, and BDE-209 accounted for 62% of the total PBDEs. The congener profiles of PBDEs in soil samples were similar to those in three commercial PBDE products (Penta-, Octa- and Deca-BDE), and Deca-BDE product was the most important contributor.     

Colorimetric Sensing of Nitroaromatic Energetic Materials Using Surfactant-Stabilized and Dithiocarbamate-Functionalized Gold Nanoparticles

Abstract

There is an increasing need for sensitive/selective determination of explosive traces in soil and post-blast debris for environmental and criminal investigations. A colorimetric sensor was developed to detect and quantify trinitrotoluene (TNT) and tetryl by the use of surfactant-stabilized and dithiocarbamate-functionalized gold nanoparticles (AuNPs). The sensor was manufactured by modifying the nanoparticles with the cationic surfactant cetyl trimethyl ammonium bromide and incorporating diethyldithiocarbamate (DDTC) in the AuNPs synthesis. DDTC firmly bound to AuNPs may show charge-transfer interactions with the —NO₂ groups of the analytes, and a color change proportional to analyte concentration accompanied the agglomeration of nanoparticles, at which the absorbances were recorded at 534?nm and 458?nm for TNT and tetryl, respectively. Although the limit of detection was 8?mgL^?1 (3.52?×?10^?5?molL^?1) for TNT and 0.8?mgL^?1 (2.78?×?10^?6?molL^?1) for tetryl, providing moderate sensitivity, the cost was greatly reduced compared to those of other thiol-functionalized AuNPs sensors. Possible interferences of other energetic substances in synthetic mixtures, of camouflage materials used in passenger belongings (e.g., detergent, sugar, caffeine, and paracetamol) and common soil ions were also examined. The method was statistically validated against a reference gas chromatography/mass spectrometry method. This sensor may pave the way for the manufacture of novel low-cost nitroaromatic explosive sensors made of DDTC-based pesticides.     

Detection and determination of formaldehyde dimethylhydrazone in mixtures with 1,1-dimethylhydrazine

Small amounts of formaldehyde dimethylhydrazone (FMDH) present as impurity in unsymmetrical dimethylhydrazine (UDMH) give a yellow color (λ_max = 456 nm) on heating with excess of sulphuric acid; the detection limit is 50 μg ml^? FDMH. Differences in the basicity of the two compounds in anhydrous acetic acid and in methanol are used to determine the two compounds in mixtures containing ? 5% (w/w) FDMH.     

Square-wave voltammetric determination of daminozide

A novel electrochemical method is described for the determination of the growth regulator, daminozide. Daminozide is hydrolyzed in alkaline aqueous media to form 1,1-dimethylhydrazine (UDMH). The UDMH is oxidized at ?0.38 V vs. Ag/AgCl at the hanging mercury drop electrode and detected by square-wave voltammetry. The sensitivity is about 2.3 nA 1 mg^?1 and the standard deviation (n = 8) for different standard solutions is 2.9 nA. Results obtained with apples after steam distillation agreed well with results obtained with a previously published method.     

Square wave voltammetric determination of diafenthiuron and its application to water,soil and insecticide formulation

A square wave cathodic stripping voltammetric (SWCSV) method has been developed for the determination of insecticide diafenthiuron. The procedure is based on controlled accumulation of the insecticide on a static hanging mercury drop electrode (SHMDE) at 0.00?mV (vs. Ag/AgCl) in Britton-Robinson buffer solution (pH 7.0). The insoluble mercury compound was reduced at ?510?mV during the cathodic potential scan. The peak currents were linearly related to insecticide concentration between 30.4 and 3200?µg?L^?1 . The detection and quantification limit were 9.1?µg?L^?1 and 30.4?µg?L^?1, respectively. The proposed analytical procedure was applied to natural water and soil samples. The method was extended to direct determination of diafenthiuron in insecticide formulation Polo® 50 WP and average content of 50.3?±?1.7 (m/m) at 90% confidence level, in close agreement with the 50.0% quoted by the manufacturer. HPLC comparison method indicated that accuracy was in agreement with that obtained by the proposed method.     

Polyaniline Sheathed Black Phosphorous: A Novel,Advanced Platform for Electrochemical Sensing Applications

Despite its excellent properties, the inherent unstable nature of black phosphorus (BP) in ambient atmosphere has severely restricted its use in electrochemical sensing applications. In this work, polyaniline (PANI) sheathed BP was prepared via the electrochemical polymerisation of aniline on BP coated screen printed carbon electrode (i. e., SPCE/BP) which resulted in an efficient, stable electrochemical platform (i. e., SPCE/BP@PANI) with improved properties which was evaluated for electrochemical detection of two model bioanalytes namely, ascorbic acid (AA) and Hydrazine (Hy). The formation of PANI on the SPCE/BP exhibited a pair of stable and well‐defined redox peaks indicating the better adsorption energy and fast electron transfer nature of BP as compared to other 2D materials like graphene and transitional metal dichalcogenides. FESEM and XPS studies revealed the formation and uniform growth of PANI on BP surface without any aggregation. Electrochemical impedance spectroscopy analyses revealed that SPCE/BP@PANI can act as a suitable electrocatalyst material for the sensing of AA and Hy. Thus, SPCE/BP@PANI electrode exhibited low limit of detection (D_L; 1.69 μM), excellent reproducibility and better selectivity towards AA oxidation over glucose, sucrose, urea, citric acid, sodium, nitrate, nitrite and magnesium with a sensitivity of 3.38 A M^?1 cm^?2 (R²=0.98) in the dynamic range of 10–1100 μM. The excellent analytical performance of the BP@PANI is plausible due to better adsorption energy and fast electron transfer of BP. Further, SPCE/BP@PANI was also used for successful detection of AA in processed fruit juice with good recovery. Under the optimal DPV conditions, the modified electrode was extended for detection of Hy in a linear range of 100–1500 μM with sensitivity of 0.09 A M^?1 cm^?2 (R²=0.99) and D_L=89 μM validating the potential of BP based composites in wide range of electrochemical applications.     

Simultaneous determination of thiamethoxam and its metabolite clothianidin by LC-MS/MS in goji berry and soil

In this study, an effective analytical method for simultaneous determination of thiamethoxam and its metabolite clothianidin in goji berry and soil was developed by liquid chromatography-tandem mass spectrometry (LC-MS/MS). The recoveries of the compounds in goji berry and soil at the levels of 0.005, 0.02, and 0.1 μg kg^?1 were 84.7–98.9% and the relative standard deviations (RSDs) were 0.9–3.2%. The limits of detection (LOD) for both compounds in goji berry and soil matrices were 0.001 mg kg^?1; the limits of quantification (LOQ) were 0.005 mg kg^?1 for both compounds in two matrices. The dissipation and final residual experiments in 2016 with the commercial formulation of dinotefuran ? thiamethoxam 30% suspension concentrate (SC) was conducted in goji berries in northwest China (Qinghai, Gansu, Inner Mongolia, and Ningxia). Thiamethoxam was dissipated fast in goji plant ecosystem with half-lives were 1.08–1.01 and 2.04–4.25 days in goji berry and soil. The final residues of thiamethoxam were <0.005–0.382 and <0.005–1.120 mg kg^?1 in goji berry and soil, respectively.     

Development of colloidal gold-based immumochromatographic assay for the rapid detection of medroxyprogesterone acetate residues in biological materials

A competitive colloidal gold-based immunoassay in lateral-flow format for the rapid detection of medroxyprogesterone acetate (MPA) in biological materials was developed. A nitro-cellulose membrane strip was separately coated with goat anti-rabbit IgG (control line) and MPA hapten-OVA conjugate (test line). Anti-MPA polyclonal antibody labelled with colloidal gold particles was first incubated with MPA. The limit of detection for lateral flow was 5?ng?g^?1 for detecting an MPA standard solution, and the limit of detection was 10?ng?mL^?1 for detecting the MPA spiked in pig urine and 10?ng?g^?1 for spiked in pig liver. The results were confirmed by high-performance liquid chromatography tandem mass spectrometry (HPLC/MS/MS) and indicated that there was a good agreement between both methods (R ²?=?0.976). The assay time for the test was less than 5?min, suitable for rapid testing on site.     

Monoclonal antibody-based enzyme-linked immunosorbent assay for detection of total malachite green and crystal violet residues in fishery products

A rapid easy-to-use trace level direct competitive enzyme-linked immunosorbent assay (dc-ELISA) detection of total residual malachite green (MG), crystal violet (CV) and their corresponding primary metabolites leucomalachite green (LMG) and leucocrystal violet (LCV) in fishery products in a single assay was developed. The monoclonal antibodies, anti-MG and anti-CV mAbs, were prepared using carboxyl-malachite green (CMG) and cationized bovine serum albumin (cBSA) conjugates as immunogen. The linear range for the quantitative detection of total MG, CV and their primary metabolites LMG and LCV was between 0.15 to 4.5?ng?mL^?1 with a half maximal inhibitory concentration (IC₅₀) at 0.56?±?0.04?ng?mL^?1 (n?=?5). The anti-MG mAbs exhibited 98% cross-reactivity to CV, less than 0.1% cross-reactivity with LMG and LCV, and no cross-reactivity with chloramphenicol, enrofloxacin, sulfadiazine, and tetracycline. Application of the dc-ELISA in fish tissue samples gave a limit of detection (LOD) of 0.37?ng?g^?1. The improved total detection lead to a recovery of 74.60?±?8.38% at 0.5?ng?g^?1 and 87.47?±?12.83% at 2.0?ng?g^?1 that was better than existing techniques. The dc-ELISA showed total MG in 7 out of 44 field fish samples that were confirmed with LC-MS/MS. The easy-to-use, inexpensive, and rapid dc-ELISA for the detection of total MG, CV and their corresponding primary metabolites holds promise for field applications.     

Single robust RP-HPLC analytical method for quantification of curcuminoids in commercial turmeric products,Ayurvedic medicines,and nanovesicular systems

A single robust reversed-phase high-performance liquid chromatography (RP-HPLC) method was developed and validated as per International Conference on Harmonization guidelines for the accurate quantification of curcuminoids in commercial turmeric products, Ayurvedic medicines, and nanovesicular systems. The proposed chromatographic method was found to be specific, linear (r²?≥?0.999), precise at intra- and inter-day levels (percentage relative standard deviation <2.0%), accurate (percentage recovery 99.14–102.29%), and robust. The limits of detection and quantification were found to be 7.40 and 24.70?ng?mL^?1 for curcumin, 9.24 and 30.80?ng?mL^?1 for demethoxycurcumin, and 6.48 and 21.61?ng?mL^?1 for bisdemethoxycurcumin, respectively. Among different commercial turmeric products and Ayurvedic medicines tested, the contents of curcumin (3.54?±?0.06–25.8?±?0.08?mg?g^?1), demethoxycurcumin (1.28?±?0.02–9.97?±?0.03?mg?g^?1), and bisdemethoxycurcumin (0.50?±?0.01–5.97?±?0.01?mg?g^?1) varied significantly. The developed method was effectively applied to the determination of encapsulation efficiency of curcuminoids (ranged between 84.33?±?3.50 and 96.59?±?2.53%) in the nanovesicular systems. In conclusion, the reported method is suitable for the analysis of curcuminoids in a wide variety of turmeric products and used for the quality control of products that contain curcuminoids.     

Studies on reaction of reduced lipoic acid with Mukaiyama reagent and its application for pharmaceutical and food analysis

A new sensitive method for the determination of lipoic acid (LA) in selected food items based on its reaction with Mukaiyama reagent (2-chloro-1-methylpyridinium iodide, CMPI) was developed. It was stated that CMPI reacts with reduced form of lipoic acid (dihydrolipoic acid, DHLA) and the stable product is produced. The spectrum of the labeled form of DHLA exhibits new band at 312?nm. Based on its spectral characteristics new spectrophotometric and UV–high-performance liquid chromatography (HPLC) methods of LA determination were elaborated. Both methods allowed determination of the analyte in the concentration range of 5?×?10^?6–1?×?10^?4?mol?L^?1 with limit of detection 0.39?×?10^?6 and 0.77?×?10^?6?mol?L^?1 for spectrophotometric and HPLC method, respectively. The practical usability of newly developed methods was checked by determination of lipoic acid contents in its pharmaceutical preparate Revitanerw. The proposed method was precise and accurate. The relative error of determination did not exceed ±0.067%. As chromatographic method allowed the determination of analyte in the presence of complex matrix, it was applied for assay of free fraction of α-lipoic acid in selected food items. A procedure of LA isolation from biological matrix was developed. The extraction with dichloromethane allowed quantitative recovery at 102.94?±?4.20%. The green barley appeared to be the richest source of LA.     

Determination of cerium(III) ions in soil and sediment samples by Ce(III) PVC-based membrane electrode based on 2,5-dioxo-4-imidazolidinyl

2,5-Dioxo-4-imidazolidinyl was used as an excellent sensing material in the preparation of a PVC membrane for a Ce(III)-selective sensor. The electrode shows a good selectivity for the Ce(III) ion with respect to most common cations including alkali, alkaline earth, transition, and heavy metal ions. The developed sensor exhibits a wide linear response with a slope of 19.6?±?0.3 mV per decade over the concentration range of 1.0?×?10^?6 to 1.0?×?10^?1 M, while the illustrated detection limit is 5.7?×?10^?7 M of Ce(III) ions. Moreover, it is concluded that the sensor response is pH-independent in the range of 3.1–9.8. The applications of the recommended electrode include the determination of concentration of Ce(III) ions in soil and sediment samples, validation with CRM's, and the Ce(III) ion potentiometric titration with EDTA as an indicator electrode.     

129I levels in soils from Ukraine and Slovenia in the last decade

¹²⁹I is important as an environmental tracer of the biogeochemical cycling of iodine and of the dissemination of nuclear pollution, because anthropogenic ¹²⁹I has been released from only few point sources and with its short mixing time its distribution therefore reveals the movement of ¹²⁹I in the environment. A radiochemical neutron activation analysis method was developed to measure the concentration of ¹²⁹I in soil samples. A procedure to pre-concentrate iodine from up to 150?g of soil was developed and validated using IAEA standard reference material IAEA-375 (Chernobyl soil). The method was applied to determine ¹²⁹I/¹²⁷I isotopic ratios as well as ¹²⁹I and ¹²⁷I concentrations in soils from several locations in Ukraine collected in 2006, 1996, 1993 and 1989, and from Slovenia, collected at various places in 2009 and 2006. The ¹²⁷I concentrations in surface soils from Ukraine were in the range 2.3–23.1?µg?g^?1 and for ¹²⁹I (11.1–245.7)?·?10^?8?µg?g^?1 dry matter with the highest value of 1.47?·?10^?3?µg?g^?1 found in a soil sample collected in Yaniv, Ukraine in July 1993. In soil samples from Slovenia ¹²⁷I concentrations ranged 0.73–130?µg?g^?1 and ¹²⁹I (8.0–245.7)?·?10^?8?µg?g^?1. The ¹²⁹I/¹²⁷I isotopic ratios of surface soils from Ukraine were in the range of the order of 10^?9–10^?5 and of 10^?10–10^?8 for soils from Slovenia. The highest isotopic ratio 13.6?·?10^?5 was found in a soil sample collected in Yaniv, Ukraine in July 1993.     

Selenium speciation in soil extracts using LC-ICP-MS

Selenium (Se) speciation in soil affects its bioavailability to crops. An analytical procedure for the determination of inorganic Se species (selenite and selenate) in soil extracts by anion-exchange liquid chromatography (LC) with ICP-MS detection has been developed, with 10-fold higher sensitivity than existing HGAAS-based soil Se measurements. A comparison of phosphate extraction solutions on agricultural soils amended with 20?µg?kg^–1 selenate or selenite was carried out, and a 0.016?M?KH₂PO₄ extraction solution is recommended. Recovery of selenate was >91%; however, selenite recovery ranged between 18.5% and 46.1%, due to rapid binding to the soil. Soil preparation did not have a significant (p?>?0.05) effect on the extractability of the selenate or selenite amendments. The stability of Se species in the phosphate extracts was variable, depending on temperature and storage time. Therefore, immediate (<1?h) analysis of the soil extracts is preferable. The method developed was applied to the determination of extractable Se from six arable soils in the UK. Extractable Se levels in these soils ranged between 6 and 13?µg?kg^–1 consisting of selenite and some soluble organic Se.     

Determination and dynamics of kanamycin A residue in soil by HPLC with SPE and precolumn derivatization

As one of the aminoglycoside antibiotics, kanamycin has been widely used in human therapy and as an additive to promote growth and prevent disease in forage. The kanamycin residue may have potenital risks for organisms and the environment. Therefore, the monitoring of this drug may have dynamic importance. In this work, a novel method for determination and dynamic study of kanamycin A was developed through solid phase extraction and derivatization with 4-chloro-3,5-dinitrobenzotrifluoride before high-performance liquid chromatography analysis. The calculated recoveries were from 72.3 to 92.5%, with relative standard deviations from 2.99 to 6.94%. The detection limit of kanamycin A in soil was 0.006?mg?kg^?1 with a signal-to-noise ratio of 3. The dynamics in soil showed that the degradation of kanamycin A coincided with the equations C?=?1.951e^{?0.0482 t} for black soil and C?=?1.807?e^{?0.0247 t} for red soil and the half-lives were 14.38 and 28.06?d respectively. The degradation rate reached 95.19% in black soil after 63 days compared with 77.14% in red soil.     

Application of the molecularly imprinted solid-phase extraction to the organophosphate residues determination in strawberries

This study describe an analytical method employing gas chromatography (GC) using flame photometric detection that has been developed for the simultaneous determination of organophosphate pesticides (diazinon, disulfoton, parathion, chlorpyrifos and malathion) in strawberry samples. For this purpose, molecularly imprinted solid-phase extraction was applied as a sample preparation technique. The method was linear in the ranges from 0.10 to 1.00?μg?g^?1, for diazinon, disulfoton, parathion and chlorpyrifos, and 0.10 to 2.00?μg?g^?1 for malathion with r?>?0.99. The detection limits (LD) ranged from 0.02 to 0.05?μg?g^?1. Recovery studies yielded average recoveries in the range of 65.25 to 87.70?%. These results showed the potential of this technique for organophosphate residue monitoring in strawberry samples.     

Distribution of Hydrocarbon-Degrading Bacteria in the Soil Environment and Their Contribution to Bioremediation

A real-time PCR quantification method for indigenous hydrocarbon-degrading bacteria (HDB) carrying the alkB gene in the soil environment was developed to investigate their distribution in soil. The detection limit of indigenous HDB by the method was 1?×?10⁶ cells/g-soil. The indigenous HDB were widely distributed throughout the soil environment and ranged from 3.7?×?10⁷ to 5.0?×?10⁸ cells/g-soil, and the ratio to total bacteria was 0.1–4.3 %. The dynamics of total bacteria, indigenous HDB, and Rhodococcus erythropolis NDKK6 (carrying alkB R2) during bioremediation were analyzed. During bioremediation with an inorganic nutrient treatment, the numbers of these bacteria were slightly increased. The numbers of HDB (both indigenous bacteria and strain NDKK6) were gradually decreased from the middle stage of bioremediation. Meanwhile, the numbers of these bacteria were highly increased and were maintained during bioremediation with an organic nutrient. The organic treatment led to activation of not only the soil bacteria but also the HDB, so an efficient bioremediation was carried out.