(R)-4-氰基-3-羟基丁酸乙酯的合成

研究了一条新的路线用于他汀类药物的重要中间体(R)-4-氰基-3-羟基丁酸乙酯的合成. 以廉价、易得的L-(－)-苹果酸为起始原料, 经酯化、还原、溴代和氰化四步反应得到目标化合物(R)-4-氰基-3-羟基丁酸乙酯, 合成总收率为56.7%. 所有中间体和最终产物均由ESI-MS, 1H NMR和13C NMR光谱及比旋光度表征并与文献值比较. 该方法原料易得、操作简便、收率良好, 产物容易分离纯化, 是一条适合大规模制备(R)-4-氰基-3-羟基丁酸乙酯的新合成工艺路线.     

模拟移动床色谱分离二十碳五烯酸乙酯和二十二碳六烯酸乙酯

二十碳五烯酸和二十二碳六烯酸是两种非常重要的ω-3多不饱和脂肪酸,广泛用于膳食补充剂和药品,同时它们的生理作用并不完全相同,因此分离制备它们的高纯度单体十分必要。首先以聚苯乙烯/二乙烯基苯（PS/DVB）聚合物为固定相,在液相色谱上分离二十碳五烯酸乙酯（EPA-EE）和二十二碳六烯酸乙酯（DHA-EE）,考察了流动相、填料粒径、温度对分离的影响。然后采用粒径20 μ m、孔径10 nm的PS/DVB填料装填了8根150 mm×10 mm的半制备色谱柱,测定了半制备柱装填的均一性。最后尝试在模拟移动床（SMB）色谱上分离EPA-EE和DHA-EE的混合物,探究了Ⅱ区和Ⅲ区的流量、进料流量、进料浓度对分离的影响,结果表明SMB制备的EPA-EE和DHA-EE的相对纯度分别为91.6%和93.6%,回收率分别为97.0%和91.6%,固定相生产率为5.97 g/（L\5h）,溶剂消耗为1.52 L/g。SMB制备EPA-EE和DHA-EE具有较大的应用潜力。     

气相色谱法测定土壤和小白菜中胺鲜酯残留量

建立了小白菜与土壤中胺鲜酯残留量的气相色谱-氢火焰离子化检测器测定方法。样品采用丙酮提取,CH2Cl2萃取,最后用丙酮定容。样品采用外标峰面积进行定量。胺鲜酯在0.2-5.0 mg/L范围内呈良好的线性关系（r=0.998）,方法的添加回收率范围为71.4%-82.6%。RSD为2.3%-8.9%,方法的最小检出量为0.05 mg/kg,能够满足小白菜与土壤中该农药残留分析的要求。     

2-vinyloxy ethyl phthalimide polymerization initiated by 1-(isobutoxy) ethyl acetate in the presence of ethyl aluminum dichloride and either ethyl acetate or ethyl benzoate

2-Vinyloxy ethyl phthalimide (ImVE) was polymerized using 1-(isobutoxy) ethyl acetate as the initiator in the presence of ethyl aluminum dichloride and either ethyl acetate or ethyl benzoate. The resulting polymers have a narrow molecular weight distribution, and their molecular weight can be controlled within a narrow range by varying the monomer and initiator concentrations. Diblock copolymers with n-butyl vinyl ether can also be formed. The behavior of the polymerization is consistent with a living cationic mechanism. A brief comparison of the title system with other initiating systems is also presented. © 1996 John Wiley & Sons, Inc.     

Conformational analysis of dicarbonyl(methylcyclopentadienyl)(2-(diethylamino)-2-oxoethyl)iron(II): a spectroscopic and molecular mechanics study

A combination of NMR and IR spectroscopic techniques was used to examine the conformational preferences of the previously unreported oxaallyliron compound dicarbonyl(methylcyclopentadienyl)(2-(diethylamino)-2-oxoethyl)iron(II) (1). IR studies revealed that 1 existed in n-pentane solutions as an equilibrium between two or more exchanging conformers through a rotation about the Fe---C bond. An additional contribution to the conformational dynamics of 1 was identified due to the resonance component of the amide group. The resonance contribution manifested in the observed restricted rotation about the C---N amide bond. Molecular mechanics calculations were used to model the conformational processes. The calculations predicted that the resonance stabilized conformation was the energetically preferred structure of 1. This agrees with the experimental evidence that identified the influence of resonance on the conformation of 1.     

3-(2-氧代环烷基)丙酸与(R)-2-硫代四氢噻唑-4-羧酸乙酯的反应

３－（２－氧代环烷基）丙酸与（Ｒ）－２－硫代四氢噻唑－４－羧酸乙酯的反应李叶芝,田颜清,黄化民（吉林大学化学,长春,１３００２３）关键词（Ｒ）－２－硫代四氢噻唑－４－羧酸乙酯,Ｎ－３－（２－氧代环烷基）丙酰－２－硫代四氢噻唑－４－羧酸乙酯,环合反应,...     

(R)-2-硫代四氢噻唑-4-羧酸及其酯的合成

L-半胱氨酸盐酸盐与二硫化碳, 氢氧化钠在硝酸铅存在下进行成环反应得到(R)-四氢噻唑-2-硫酮-4-羧酸产率76% , 后者与 醇在硫酸铁水合物催化下反应得到(R)-四氢噻唑-2-硫酮-4-羧酸酯, 产率40～82% .     

2－（5－Br－2－吡啶偶氮－5－二乙氨基）－酚与铑的显色反应的研究及应用

本文研究了２－（－５－Ｂｒ－２吡啶偶氮－５－二乙氨基）－酚与铑（Ⅲ）的显色反应。在ｐＨ为４．０的邻苯二甲酸氢钾缓冲液介质中，Ｒｈ（Ⅲ）与试剂形成稳定的橙红色络合物，其组成比为１：４，最大吸收波长为４９０ｎｍ，表现摩尔吸光系数为１．３×１０￣５Ｌ·ｍｏｌ￣（－１）·ｃｍ￣（－１）。铑含量在０～４μｇ／１０ｍＬ范围内服从比尔定律。     

2-(5-溴-2吡啶偶氮)-5-二乙氨基酚显现人体皮肤表面镀锌工具遗留印迹

研究2-(5-溴-2吡啶偶氮)-5-二乙氨基酚(5-Br-PADAP)试剂显现镀锌工具遗留印迹的方法。 考察接触时间、时间间隔、试剂浓度、是否洗手等因素对印迹强度及分辨率的影响,并对该方法的可靠性进行验证。 实验结果表明,试剂浓度1 g/L、接触时间10 s以上,间隔时间不超过4 h条件下,均能显出较好的印迹。 该方法可以灵敏地显现镀锌工具遗留印迹,对非铁金属工具遗留印迹检测进行了很好地补充。     

S-[2-(叔丁氧羰基氨基)乙基]-3-苯基丙酸硫酯类化合物脱除Boc保护基的反应研究

报道了取代苯丙酸类化合物1a～1d与N-叔丁氧羰基-L-半胱氨酸甲酯(2)在双(2-氧代-3-噁唑烷基)次磷酰氯(BOP-C1)作用下,以79%～92%收率得到缩合产物S-[2-(叔丁氧羰基氨基)乙基]-3-苯基丙酸硫酯类化合物3a～3d;3a～3d在三氟乙酸(TFA)作用下脱除Boc保护基时,结果不仅得到了正常的脱保护基产物4a～4d,还生成了2-取代噻唑啉类化合物5a～5d,研究表明5a～5d是由4a～4d分子内脱水环合而成.通过优化三氟乙酸用量、反应温度以及反应时间等条件,能够以较高收率分别得到4a～4d和5a～5d(收率85%～91%和86%～89%).而S-[2-(叔丁氧羰基氨基)乙基]-3-苯基丙烯酸硫酯类化合物3e～3f由于双键结构,在三氟乙酸作用下仅生成脱除Boc保护基产物4e～4f.该反应的研究为2-取代噻唑啉类化合物的合成提供了一种简便有效的方法.     

CE Determination of 2-(9-Carbazole)ethyl Chloroformate-Labeled Oligopeptides

A pre-column derivatization method for sensitive determination of oligopeptides, using the tagging reagent 2-(9-carbazole)ethyl chloroformate (CEOC-Cl) followed by capillary electrophoresis (CE) with diode-array detection, has been developed. Maximum yield close to 100% were observed when a three to fourfold molar excess of reagent was used at pH 9.0–10.0. Excess reagent was extracted with n-hexane–ethyl acetate 9:1–10:1 (v/v); this enabled direct analysis using CE with no significant disturbance from the major fluorescent reagent degradation by-products. The effects on the results of buffer pH and of SDS and organic modifier concentrations were examined. Good baseline resolution in the separation of five CEOC-peptides was achieved with a 48.5-cm total length (effective length 40 cm) 50-μm inner diameter capillary column.     

Preparation,characterization and thermal stability of poly[2-(Dimethylamino)ethyl acrylate]

Poly[2-(dimethylamino)ethyl acrylate] (PDAEA) and polymer complexes of 2-(dimethylamino)ethyl acrylate (DAEA) with nickel(II), copper(II), iron(III) and cobalt(II) chlorides were prepared and characterized by means of IR, electronic spectra and elemental analysis. The thermal stability of the homopolymer was compared with those of the polymer complexes, and the order of stability was given. The activation energies of the polymer complexes were calculated.     

Synthesis and reactions of 2-hydroxy-4-oxo-4-(2,3,5,6-tetrafluoro-4-methoxyphenyl)-but-2-enoic acid methyl ester

2-Hydroxy-4-oxo-4-(2,3,5,6-tetrafluoro-4-methoxyphenyl)-but-2-enoic acid methyl ester (1) was synthesized by the reaction of pentafluoroacetophenone with dimethyl oxalate in the presence of sodium methylate. Subsequently, reactions of compound 1 with aniline, o-phenylenediamine, and o-aminophenol were investigated. In addition, the thermal cyclization of ester 1 was studied and led to the formation of 5,6,8-trifluoro-7-methoxy-4-oxo-4H-chromene-2-carboxylic acid methyl ester (6) due to nucleophilic substitution of the 3-fluoro group. Hydrolysis of compound 1 and subsequent cyclization by treatment with SOCl₂ gave 5-(2,3,5,6-tetrafluoro-4-methoxyphenyl)-furan-2,3-dione (3). Thermal decarbonylation of compound 3 under mild conditions resulted in the formation of 3-(2,3,5,6-tetrafluoro-4-methoxyphenyl)-propene-1,3-dione (4) which dimerized to pyranone 5.     

聚[2-(4-苯基偶氮苯氧基)乙基丙烯酸酯]的合成及光响应性能研究

从4-羟基偶氮苯出发,依次与2-氯乙醇、丙烯酰氯反应,合成了2-(4-苯基偶氮苯氧基)乙基丙烯酸酯(PAPEA)。接着以PAPEA为单体,二硫代苯甲酸异丁腈酯(CPDB)为链转移剂,偶氮二异丁腈(AIBN)为引发剂,利用可逆加成-断裂链转移(RAFT)聚合法合成了聚[2-(4-苯基偶氮苯氧基)乙基丙烯酸酯](PPAPEA)均聚物,同时考察了反应时间、引发剂和链转移剂浓度等因素对聚合反应的影响。利用FT-IR、1H-NMR和GPC等对单体和聚合物的结构进行了表征,并利用UV对聚合物的光响应性能进行了测试。结果表明,PAPEA的聚合反应动力学曲线呈良好的线性关系,分子量分布较窄(小于1.3);均聚物在紫外光照下的异构化速率随分子量的增大而减缓,而其在自然光下的回复速率变化不大。     

β-三氯锗基丙酸及β-三苯锗基丙酸与苯基溴化镁的反应

三氯锗基丙酸(1a)和三苯锗基丙酸(2a)与过量苯基溴化镁起反应时,这两个分子中的羧基表现出一些奇特性质。当1a和2a与不同浓度的苯基溴化镁起反应时,都能生成相应的酮(3a)和醇(4a)。在稀盐酸作用下,4a极易脱水生成1,1-二苯基-3-三苯锗基丙烯-1(5a)。当1a与苯基溴化镁起反应,然后再用稀盐酸处理也同样得到5a。5a的Ge-C键能被LiAlH~4高选择性地切断,生成三苯基锗烷(6a)和1,1-二苯基丙烯(6b)。     

N-[1-(取代苯基)乙基]-2-羟基苯甲酰肼的合成、表征及抑菌活性

依据邻羟基二苯醚及芳香肼类化合物的抗菌特性, 以邻羟苯基为分子核心, 酰肼键为桥基, 设计合成了7种未见报道的N-(取代苯基)乙基-2-羟基苯甲酰肼类化合物. 以水杨酸甲酯为原料, 经肼解反应后与取代苯乙酮缩合, 再与硼氢化钠反应制得目标化合物, 化合物结构经IR, ¹H NMR和元素分析等证实. 抗菌活性测试结果表明, 该类化合物对不同菌株的抑菌活性具有明显的选择性和特异性. 当质量浓度为1×10^-4 g/mL时, 化合物3b和3e对大肠杆菌和白色念珠菌的抑菌率高达100%, 有极强的抑菌活性; 所有化合物对金黄色葡萄球菌的抑菌率均大于70%, 有一定的抑菌活性. 构效关系分析结果表明, 苯基中引入Cl或Br等卤原子能显著增强化合物的抑菌活性, 而引入-NO₂及-CH₃基团则会降低其抑菌活性.     

Microwave-Assisted Synthesis and Characterization of Poly(2-(dimethylamino)ethyl methacrylate) Grafted Gellan Gum

Poly(2-(dimethylamino)ethylmethacrylate) was grafted on gellan gum (GG) in aqueous medium under microwave irradiation using ammonium persulfate and N,N,N′N′-tetramethylethylenediamine as the initiation system. Grafted copolymers were characterized by FT-IR, TGA, and SEM techniques. The influence of microwave power, exposure time, and composition of the reaction mixture on extent of grafting was studied. Conditions for obtaining the highest degree of grafting were optimized. The rate of grafting was determined from weight measurements. The overall activation energy for grafting is found to be 31.2 kJ/mol, indicating the occurrence of the grafting process with absorption of low thermal energy.     

具有聚集荧光增强性质的双(4-二乙氨基水杨醛)缩偶氮二甲酰肼二丁基锡的合成和晶体结构

在甲醇溶液中,卡巴肼、(4-二乙氨基)水杨醛和二乙酸二丁基锡"一锅法"反应,合成了一个新颖的基于双(4-二乙氨基水杨醛)缩偶氮二甲酰肼(L)的七配位有机锡配合物[Sn(L)(n-butyl)_2]n(T)。经元素分析、IR、(1H,119Sn,13C)NMR和X射线衍射晶体结构表征,T的晶体属单斜晶系C2/c空间群,中心锡周围由双(4-二乙氨基水杨醛)缩偶氮二甲酰肼的O,N配位原子占据赤道位置和2个丁基占据顶端位置形成畸变五角双锥构型。通过烯醇式氧原子的桥联配位作用,T向一维带状无限扩展产生"竹筏状"超分子结构。配合物T在二甲基甲酰胺、四氢呋喃、乙醇、甲醇和甲苯有机溶剂及其有机溶剂-水混合物中具有强荧光发射峰,当含水量的体积分数在0～10%(V/V)时具有良好的聚集荧光增强效应,含水量大于10%(V/V)时发生荧光淬灭。     

Controlled/living polymerization of 2‐(diethylamino)ethyl methacrylate and its block copolymer with tert‐butyl methacrylate by atom transfer radical polymerization

Polymerization of 2‐(diethylamino)ethyl methacrylate (DEAEMA) via homogeneous atom transfer radical polymerization under various reaction conditions is described. The effects of the initiators and solvents were examined. With 1,1,4,7,10,10‐hexamethyl triethylenetetramine/copper(I) chloride/p‐toluenesulfonyl chloride as the ligand/catalyst/initiator system in methanol, poly(DEAEMA) with a polydispersity index as low as 1.07 was synthesized. Kinetic studies demonstrated the polymerization was very well controlled and exhibited the living characteristic of the process. Well‐defined block copolymers of DEAEMA and tert‐butyl methacrylate (tBMA) were successfully synthesized. The copolymers could be synthesized with equally good results by starting with either p(DEAEMA) or p(tBMA) as the macroinitiators. However, only the macroinitiators terminated with chlorine should be used. The corresponding macroinitiators with bromine as a transferable group did not yield well‐defined copolymers. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2688–2695, 2003     

Preparation and Characterization of Some Substituted Benzyl N-Nitrosocarbamates Containing an N-2-(Methylthio)ethyl or a Bis(2-aminoethyl)sulfide Functionality

The synthesis and characterization of some substituted benzyl N-nitrosocarbamates with an N-2-(methylthio)ethyl or a bis(2-aminoethyl)sulfide functionality is reported, as a part of a long-term goal to design and prepare novel photolabile structures that could be used as substances for controlled release of alkylating and/or crosslinking agents. The synthesis was accomplished by reaction of benzyl chloroformates with the corresponding amines, resulting in the preparation of carbamates. The latter were subsequently nitrosated, utilizing two different N-nitrosation methods, to yield the target structures.