Synthesis of light-sensitive arenesulfonylazido polycarboxylic acids

Several light-sensitive arenesulfonylazido polycarboxylic acids were synthesized by a one-step reaction of a polymeric anhydride with a light-sensitive monofunctional alcohol, or by the reverse reaction, i.e., reaction of a polymeric alcohol with a light-sensitive monofunctional anhydride. The polycarboxylic acids are soluble in polar organic solvents and in aqueous base. Neutralization of part of the carboxyl groups gives rise to the formation of water-soluble polymers. Coreaction of poly(maleic anhydride-co-methyl vinyl ether) with 2-hydroxyethyl 4-sulfonylazidocarbanilate and 2-hydroxyethyl trans-2,5-dimethoxystilbene-4′-carbamate produces a light-sensitive polycarboxylic acid with “built-in” sensitizer.     

Profiles of volatile metabolites in biological fluids using capillary columns

Nickel capillary columns coated with moderately polarstationary phases such as Witconol can be used for the separation of the organic volatile fraction from biological fluids. A “transevaporator” sampling technique for the collection of the organic volatiles on glass beads from as little as 5 to 500 μl of biological fluids (e.g. urine, serum, amniotic fluid, breast milk, saliva, etc.) is described. The organic volatiles are thermally desorbed from the glass beads into a short precolumn cooled in liquid nitrogen, which overcomes the problems associated with sample introduction onto narrow-bore capillary columns. The application of the full analytical technique to problems associated with the early detection of disease is illustrated.     

Analysis of polar compounds on PEG-40M/KF glass capillary columns

The chromatographic properties of potassium fluoride as an additive to the polyethylene glycol stationary phase were investigated. This unique base in organic chemistry was shown to succeed in yielding good results for the analysis of polar compounds, including the primary amines. Glass capillary columns of high selectivity for primary and secondary aliphatic amines were obtained by the “hexane plug” procedure by which a thin layer of KF is deposited on the inner surface of glass capillary columns. Some possible types of donor-acceptor interactions occuring within the system PEG/KF/solute were considered.     

Thermochemolysis of winery wastewater particulates—Molecular structural implications for water reuse

Environmental concerns have increased the interest in winery wastewater remediation and reuse. These practices require more detailed understanding of wastewater composition to ensure optimum usage, and to minimize the risk of long term soil degradation and grape contamination. Particulate organic matter is an important contributor to the carbon burden in winery wastewaters. This article investigates the molecular structure of particulates from the most common winery wastewater treatment processes via infrared spectroscopic and thermochemolysis-gas chromatography/mass spectrometry techniques. Study of the organic composition of both influent and effluent particles enabled further insight into which compounds could prove problematic during treatment and on discharge. The yield and molecular structure of desorbed or “guest” compounds were found to strongly correlate with those produced during pyrolytic cracking. These “guest” compounds and macromolecular fragments form a continuum whose separation is based on molecular size. Polyphenolic and lignin derived compounds tended to survive the water treatment processes within assemblages of microbial detritus. No evidence was found for particles adsorbing and concentrating other unrelated organics such as anthropogenic chemicals from winery wastewaters. Any release of particulates will require careful management to prevent localized accumulation of recalcitrant compounds to toxic levels.     

Solid- and liquid-state studies of a wide range of chemicals by isothermal and scanning dielectric thermal analysis

We have observed unique variations in AC electrical conductivity of solids when studied with respect to temperature, time, and frequency. A wide range of solids were examined for this study e.g., organics, polymers, carbohydrates, active pharmacy ingredients (APIs), and amino acids. The observed dielectric analysis conductivity for this great number of organic materials follows an Arrhenius plot of log polar ionic conductivity which is linearly related to reciprocal temperature and the correlation of coefficient is 0.992–0.999. These experimental observations support the polaron hopping conduction model. Experimental results clearly show novel dielectric behavior of a linear increase in a log ionic conductivity versus temperature in the pre-melt/solid-state transition regions. We have differentiated the solids which show the conductivity variations in pre-melt from those which do not. Isothermal dielectric analysis was used to study the cause of this variation in solids which yielded the measure of behavior, i.e., the polarization time property. We have also studied the effect of various experimental factors (e.g., moisture and purity) on the results. Correlating dielectric with calorimetric analyses gave us a better understanding of solid-state properties. Calorimetric analysis was used to assure that the observed variations in the solid-state properties are not due to moisture or impurities present in the sample. The ASTM E698 “purity method” was employed to verify the purity of the chemicals. Activation energies were calculated based on Arrhenius behavior to better interpret the solid-state properties. As the different chemicals were heat–cool cycled they were more amorphous, as evidenced by the decreasing activation energy for charge transfer with an increasing amorphous content.     

Direct determination of the phenanthrene and methylphenanthrene isomer distribution in crude oils by multidimensional capillary GC

The methylphenanthrene index (MPI) [1,2] which was recognized as suitable for the assessment of the “thermal” history of sedimentary organic matter, can be determined directly i.e. without preceding LC group separations by application of multi-dimensional GC in capillary columns. A GC double oven instrument (Siemens Sichromat 2) equipped with a “live switching” coupling piece was used for the necessary measurements.     

Adsorption and surface characteristics of some pigments

The study of the heterogeneous nature of pigment surfaces was carried out by means of the adsorption of polar organic molecules from organic solvents onto the surface of a number of industrial pigments and extenders, including titanium dioxide, talc, barium sulphate, lead chromate, etc. An adsorption pattern was observed which suggested the existence of “Selective Polar Adsorption”, this being quite distinctive from purely physical (capillary condensation type) adsorption and chemisorption. Apparently the surfaces of pigments and extenders consist of a number of distinctive “active” areas, each particular area adsorbing selectively a specific type of polar group. Every pigment can be characterized by the size, number and type of these individual areas, which give a “fingerprint” of the pigment and which apparently depends more on the origin of the pigment than on its chemical structure.     

Structures of the products of reaction of 1,5-diketones with hydroxylamine

Alkylidenebis-2,2′-cyclohexanones react with two molecules of hydroxylamine to give 8-hydroxy-1,2,4,5-bistetramethylene-7-oxa-6,8-diazabicyclo[3.2.1]octanes, whereas 5,5′-methyl ene-2,2-dimethyl-4-pyrone and “semicyclic” and aliphatic-aromatic 1,5-diketones form dioximes.     

Fused silica capillary column GC/MS for the analysis of priority pollutants

Operational characteristics have been determined for fused silica capillary column (FSCC) GC/MS as applied to “extractable” priority polutants. Chromatographic data show excellent relative retention time (RRT) intralaboratory precision and interlaboratory accuracy when multiple internal standards are empolyed. Potential chromatographic problems, such as column overload and “double peaking”, are addressed. Response factor relative standard deviations (RSD) at 50 ng for most of the extractable priority pollutants over the long term indicated precise determination (i.e. RSD generally ≤ 10%). Linearity was demonstrated over two orders of magnitude for FSCC GC/MS analysis of compounds with relatively low and high RF (response factor) values. Potential quantitative problems, such as saturation, are discussed. For certain aromatic priority pollutants interlaboratory RF agreement was observed. This was noted as perhaps the most important property of FSCC GC/MS analysis when the multiple internal standard approach is utilized. Determinations of extractable priority pollutants are directly compared for paced column GC/MS and FSCC GC/MS analysis of separate and composited extracts. For six extracts analyzed in triplicate, the latter configuration was shown to produce more consistent results. In view of the superior analysis logistics of composite extract FSCC GC/MS analysis, this approach was established as the preferred method for the analysis of priority pollutants classified as extractable.     

Chemical composition of the essential oil of Feronia elephantum Correa

The essential oil composition of Feronia elephantum Correa (family: Rutaceae) was examined by capillary gas chromatography (GC) and gas chromatography-mass spectroscopy (GC-MS). The analysis revealed the presence of 24 constituents, of which 18 constituents were identified. Trans-anethole (57.73%) and methyl chavicol (37.48%) were the major compounds, while cis-anethole, p-anisaldehyde, (E)-jasmone, methyl eugenol, β-caryophyllene, linalool and (E)-methyl isoeugenol were also present as the minor constituents.     

Identification of Organic Compounds Solvent Extracted from Paper and Glass Soxhlet Thimbles

Abstract

Organic compounds leached from paper and glass soxhlet thimbles have been identified by computerized high resolution gas chromatography /mass spectrometry. Nineteen specific organics have been tentatively identified from paper thimbles. The analysis of glass thimbles have not demonstrated these contaminants. The use of glass thimbles as a substitute for paper is advantageous in preparation of samples for trace organic analysis. This is an improvement but not a panacea as cross-contamination must still be evaluated by the analytical chemist.     

Gas-liquid chromatography of amino acids: Columns and methodology as a basis for routine amino acid analysis using glass capillary gas chromatography

A carefully Standardized technique is described for the preparation of glass capillary columns which can be used successfully for routine quantitative amino acid analysis. Comparison is made between two different modes of sample injection. Preliminary quantitative results from “split” injection and “on-column” injection techniques are evaluated statistically and it is concluded that the “on-column” system is a prerequisite for quantitative amino acid analysis by glass capillary gas chromatography. An analysis of fish muscle protein hydrolyzate illustrates an application of this technique and results are compared with those from a packed column analysis.     

Fast online emission monitoring of volatile organic compounds (VOC) in wastewater and product streams (using stripping with direct steam injection)

Open-loop stripping analysis (also referred to as dynamic headspace) is a very flexible and robust technology for online monitoring of volatile organic compounds in wastewater or coolant. However, the quality and reliability of the analytical results depend strongly on the temperature during the stripping process. Hence, the careful and constant heating of the liquid phase inside the stripping column is a critical parameter. In addition, this stripping at high temperatures extends the spectrum of traceable organics to less volatile and more polar compounds with detection limits down to the ppm-level. This paper presents a novel and promising approach for fast, efficient, and constant heating by the direct injection of process steam into the strip medium. The performance of the system is demonstrated for temperatures up to 75 °C and traces of various hydrocarbons in water (e.g., tetrahydrofuran, methanol, 1-propanol, n-butanol, ethylbenzene).     

Distorted solvent peaks in capillary GC: A symptom of porous column surfaces

Many uncoated precolumns, and to a lesser extent separation columns, strongly retain some of the solvent. Retarded release of such solvent elevates the baseline after the solvent peak and causes ugly “humps” of eluted solvent as the temperature is increased. The problem is probably a result of retention by a porous surface, e.g. surfaces obtained by leaching or hydrothermal treatment of capillaries prior to silylation. It is assumed that other problems with capillary columns can be explained by the same mechanism, including: a kind of adsorption including apolar compounds, and “ghost” peaks as well as “memory” effects. Fused silica capillaries are superior to glass, but even for these special procedures are required in order to achieve thorough deactivation of the internal surface without introducing porosity.     

Poly(3,3′-dimethoxy-2,2′-bithiophene): Synthesis and comparison with poly(3-methoxythiophene)

A new electroactive polymer, namely poly(3,3′-dimethoxy-2,2′-bithiophene) has been prepared by voltammetric polymerization of 3,3′-dimethoxy-2,2′-bithiophene. Due to a different coupling pattern (equivalent to “head-to-head,” and “tail-to-tail” coupled alkoxythiophene rings), poly(3,3′-dimethoxy-2,2′-bithiophene) exhibits different voltammetric properties than the corresponding “head-to-tail” coupled polymer, i.e., poly(3-methoxythiophene). Poly(3,3′-dimethoxy-2,2′-bithiophene) gives very sharp oxidation and reduction peaks indicating an abrupt insulator to conductor transition. This hypothesis was corroborated by the studies of relative resistance as a function of electrode potential. Sharper and better-defined redox peaks may indicate better stereoregularity of poly(3,3′-dimethoxy-2,2′-bithiophene) as compared to poly(3-methoxythiophene) since in this compound the 5,5′-coupling positions are geometrically equivalent and no coupling defects are expected. © 1992 John Wiley & Sons, Inc.     

Flexible soft glass capillary columns vs. flexible fused silica capillary columns for gas chromatography-a critique

The gas chromatographic use of flexible thin walled soft glass capillary columns coated with non-polar stationary phases is compared to similar columns made of fused silica glass. With non-polar soft glass columns, the use of surface roughening viagaseous HCI followed by a Carbowax 20 M pretreatment gave adsorptive phenomena, and thermal instability. With very polar soft glass columns where a variety of cyanopropyl silicone phases were coated directly onto the NaCI crystal matrix, adsorptive effects were again prominent and frequent break-down in film stability with time, was also observed. These undesirable effects were due to the presence of metal oxides in the soft glass. Attempts to remove these materials from the thin walled soft glass surface by means of acid leaching produced significant brittleness. This deleterious result was further increased by attempts at high temperature silylation or polysiloxane deactivation. In sharp contrast, the fused silica surface was essentially free of metal oxides and the surface silanol groups are easily neutralized by silylation or polysiloxane deactivation techniques. No brittleness was observed following these procedures. An increasing series of high molecular weight, viscous, polymeric vinyl containing non-polar and highly polar stationary phases have been produced which readily wet the surface of the fused silica and are easily crosslinked in the presence of free radical generators. These columns are essentially free of all the problems noted with flexible thin walled soft glass. When all of the parameters involved in the fabrication of a glass capillary column are assessed, it appears at this time, that the flexible fused silica glass column with cross linked phases approaches the “ideal” capillary column.     

Characterisation of airborne particles and associated organic components produced from incense burning

Airborne particles generated from the burning of incense have been characterized in order to gain an insight into the possible implications for human respiratory health. Physical characterization performed using field-emission scanning electron microscopy showed incense particulate smoke mainly consisted of soot particles with fine and ultrafine fractions in various aggregated forms. A range of organic compounds present in incense smoke have been identified using derivatisation reactions coupled with gas chromatography?Cmass spectrometry analysis. A total of 19 polar organic compounds were positively identified in the samples, including the biomass burning markers levoglucosan, mannosan and galactosan, as well as a number of aromatic acids and phenols. Formaldehyde was among 12 carbonyl compounds detected and predominantly associated with the gas phase, whereas six different quinones were also identified in the incense particulate smoke. The nano-structured incense soot particles intermixed with organics (e.g. formaldehyde and quinones) could increase the oxidative capacity. When considering the worldwide prevalence of incense burning and resulting high respiratory exposures, the oxygenated organics identified in this study have significant human health implications, especially for susceptible populations.     

Analysis of polar peptides using a silica hydride column and high aqueous content mobile phases

The retention behavior of a set of polar peptides separated on a silica hydride stationary phase was examined with a capillary HPLC system coupled to ESI‐MS detection. The mobile phases consisted of formic acid or acetic acid/acetonitrile/water mixtures with the acetonitrile content ranging from 5 to 80% v/v. The effects on peptide retention of these two acidic buffer additives and their concentrations in the mobile phase were systematically investigated. Strong retention of the peptides on the silica hydride phase was observed with relatively high‐organic low‐aqueous mobile phases (i.e. under aqueous normal‐phase conditions). However, when low concentrations of acetic acid were employed as the buffer additive, strong retention of the peptides was also observed even when high aqueous content mobile phases were employed. This unique feature of the stationary phase therefore provides an opportunity for chromatographic analysis of polar peptides with water‐rich eluents, a feature usually not feasible with traditional RP sorbents, and thus under conditions more compatible with analytical green chemistry criteria. In addition, both isocratic and gradient elution procedures can be employed to optimize peptide separations with excellent reproducibility and resolution under these high aqueous mobile phase conditions with this silica hydride stationary phase.     

C5,5—取代基对海因质子亲合能的影响

文章对５种碳五位（Ｃ５）的不同取代基海因的质子北合能（ＰＡ）,在亚稳状态下采用“动能法”进行了研究。以５,５－甲基海因作为参照,确定了５种样品亲质子能的顺序。     

Analysis of Trace Levels of Volatile Organic Contaminants in Municipal Drinking Water by Glass Capillary Gas Chromatography Using Simultaneous Flame Ionization and Electron Capture Detection

Abstract

A glass capillary gas chromatographic system using simultaneous flame ionization (FID) and electron capture (ECD) detection has been employed for the analysis of trace volatile organic pollutants in a municipal drinking water supply. The use of dual detectors with glass capillary columns allows resolution and detection of both halogenated and non-halogenated compounds simultaneously at less than microgram per liter (ppb) concentrations. By using diethyl ether as a solvent in preparing standard solutions of volatile organic compounds, standardization is made more accurate due to a reduction in solvent masking of early eluting peaks of interest. Additionally, ether shows promise for use in an internal standard method for quantification of VOA. These techniques were found to alleviate problems previously encountered in the analysis of purgeable organics and are described.