Simultaneous Removal of Heavy Metals (Cu,Cd, Cr,Ni, Zn and Pb) from Aqueous Solutions Using Thermally Treated Romanian Zeolitic Volcanic Tuff

Increased concentrations of heavy metals in the environment are of public health concern, their removal from waters receiving considerable interest. The aim of this paper was to study the simultaneous adsorption of heavy metals (Cu, Cd, Cr, Ni, Zn and Pb) from aqueous solutions using the zeolitic volcanic tuffs as adsorbents. The effect of thermal treatment temperature, particle size and initial metal concentrations on the metal ions sorption was investigated. The selectivity of used zeolite for the adsorption of studied heavy metals followed the order: Pb > Cr > Cu > Zn > Cd > Ni. The removal efficiency of the heavy metals was strongly influenced by the particle sizes, the samples with smaller particle size (0–0.05 mm) being more efficient in heavy metals removal than those with larger particle size (1–3 mm). Generally, no relevant changes were observed in heavy metals removal efficiency for the treatment temperatures of 200 °C and 350 °C. Moreover, at a higher temperature (550 °C), a decrease in the removal efficiencies was observed. The Cd, Zn, Cu, Cr, Zn and Ni sorption was best described by Langmuir model according to the high values of correlation coefficient. The pseudo-first-order kinetic model presented the best correlation of the experimental data.     

Simultaneous determination of Cd and Fe in sewage sludge by high-resolution continuum source electrothermal atomic absorption spectrometry with slurry sampling

This work describes the method development for the simultaneous determination of Cd and Fe using the main resonance line of Cd at 228.802 nm and a secondary Fe line at 228.725 nm, and high-resolution continuum source electrothermal atomic absorption spectrometry (HR-CS ET AAS). Two certified reference materials and two ‘real’ samples of industrial and domestic sewage sludge have been analyzed as slurries prepared in a mixture of HF and HNO₃. The simultaneous determination has been performed using a short temperature program of only 30 s, without a pyrolysis stage and with two atomization stages, at 1300 °C and 2300 °C, taking into consideration the significantly different thermal characteristics of Cd and Fe. Structured background, which is likely due to the presence of one or more diatomic molecules, including SiO, has been detected. However, there has been no spectral overlap between molecular bands and the atomic lines of Cd and Fe, making possible the determination to be carried out using only automatic correction for continuous background. Calibration against aqueous standards lead to good agreement between certified or informed values and the determined values, at a statistical confidence level of 95%; recovery tests were performed for real samples, resulting in recoveries ranging from 90 to 105%. Detection limits of 0.03 and 90 µg g^{− 1} for Cd and Fe, respectively, have been obtained, which are adequate for the purpose.     

Voltammetric method for the determination of Zn, Cd, Pb, Cu and Ni in interstitial water

To determine heavy metals in interstitial water from Baltic sea sediments a sampling method with subsequent voltammetric determination is described. Copper, lead, zinc and cadmium are determined in the UV-digested samples of interstitial water by differential pulse anodic stripping voltammetry while nickel is determined by adsorption voltammetry. The determination of five metals in one sample in a wide concentrations range is possible using a low cost apparatus. The profiles of the metal concentrations in interstitial water of subsequent layers of sediments, sampled from Puck Bay, Gdask Bay, the Bornholm area and the Supsk area are presented.     

微波消解/ICP-OES法同时测定发菜中Fe、Cu、Mn、Zn

采用微波消解处理样品,电感耦合等离子体发射光谱(ICP-OES)测定了发菜中微量元素Fe、Cu、Mn、Zn含量。结果表明,各元素检出限分别为1.58、0.79、0.52、0.67μg.mL1;相对标准偏差均小于2.2%;回收率为92.7%~101.3%。该法精密度高、准确度好,所测数据可为发菜的合理利用提供依据。     

Voltammetric method for the determination of Zn,Cd, Pb,Cu and Ni in interstitial water

To determine heavy metals in interstitial water from Baltic sea sediments a sampling method with subsequent voltammetric determination is described. Copper, lead, zinc and cadmium are determined in the UV-digested samples of interstitial water by differential pulse anodic stripping voltammetry while nickel is determined by adsorption voltammetry. The determination of five metals in one sample in a wide concentrations range is possible using a low cost apparatus. The profiles of the metal concentrations in interstitial water of subsequent layers of sediments, sampled from Puck Bay, Gdańsk Bay, the Bornholm area and the S?upsk area are presented.     

ICP slurry introduction for simple and rapid determination of Pb, Mg and Ca in plant roots

Pb, Mg and Ca were simultaneously determined in plant roots by slurry introduction into inductively coupled plasma optical emission spectrometry (SS-ICP-OES). Slurries were prepared in 0.5% or 5% (v/v) HNO₃ with 0.5, or 5% (v/v) Triton X-100. Omission of the Triton X-100 improved results. Compared with wet ashing of the root sample followed by ICP-OES, ICP-MS and FAAS, the method offers: comparable results, simplification of sample preparation, less sample contamination, and reduction in the use of dangerous and corrosive reagents. The precisions varied: 1.7% for Mg, 2.8% for Ca and 4.3% for Pb, and were not significantly different (95% confidence level) from those of conventional analysis.      

改性污泥与无烟煤成浆性的研究

采用阴离子表面活性剂萘磺酸钠甲醛缩合物、聚羧酸钠作为分散剂,考察了不同污泥用量时污泥煤浆的成浆性能。结果表明,当污泥(干基)添加量为煤质量的4%时,成浆浓度超过60%,随着污泥用量的提高,污泥煤浆的成浆浓度降低。污泥加入后,浆体的稳定性增强,污泥比例越高,产生沉淀的时间延长。当污泥(干基)添加量为煤质量的4%时,产生沉淀的时间超过160h,与使用稳定剂效果相当。使用不同添加剂制备的污泥煤浆均呈假塑性。污泥疏松的絮状结构,蜂窝状的外表面,强大的吸水性是造成污泥煤浆成浆浓度下降,稳定性增加的主要原因。     

Analytical performance of a multi-element ICP-AES method for Cd, Co, Cr, Cu, Mn, Ni and Pb determination in blood fraction samples

An analytical method using inductively coupled plasma atomic emission spectrometry (ICP-AES) for rapid simultaneous determination of seven heavy metals (Cd, Co, Cr, Cu, Mn, Ni and Pb) in human blood fractions, like plasma, cells fraction and whole blood, is performed. The optimum wavelength was selected using as criterions the sensitivity, the linearity and recovery of aqueous standard solutions. The pretreatment of the sample, the centrifugal conditions, the necessity of digestion and the dilution of the digests were also studied. For plasma it was possible to avoid digestion of the sample, but for cells fractions and whole blood the digestion is necessary. The samples were acid-digested by HNO₃ in closed Teflon tubes under high temperature and pressure conditions and were diluted before injection into ICP-AES. Also, optimization of the inductively coupled plasma conditions like nebulizer argon flow rate, sample flow rate and power of radio frequency was performed for each analyte. Finally, the effect of the type of the employed calibration technique on the total variation of the method was examined. Calibration using the standard addition technique was proved more accurate for the determination in terms of analyte recovery. The sensitivity and recovery (Cd 99%, Co 101%, Cr 100%, Cu 99%, Mn 101%, Ni 100% and Pb 97%) of the developed method are presented for all examined blood fractions. Correspondence: George A. Zachariadis, Laboratory of Analytical Chemistry, Department of Chemistry, Aristotle University, Thessaloniki 54124, Greece     

ICP-AES法测定环境水样中的微量镉铬铜镍铅锌

应用ＩＣＰ－ＡＥＳ法对环境水样中Ｃｄ、Ｃｒ、Ｃｕ、Ｎｉ、Ｐｂ、Ｚｎ等６种微量元素进行直接测定。考察了环境水样中钙、镁离子对的影响。通过对国标样品及实际样品的测定,加标回收实验,建立了简便、快速、准确、稳定、重现性较好的ＩＣＰ－ＡＥＳ法测定环境水样中６种微量元素的分析方法。     

污泥干燥预处理后与神府煤共成浆性的研究

以萘系阴离子表面活性剂为分散剂,考查了污泥干燥条件和粒径对神府煤成浆性的影响。结果表明,将污泥干燥后再制浆,明显提高了污泥煤浆的成浆浓度;升高干燥温度,有利于提高污泥煤浆的成浆浓度。干燥温度对污泥的可磨性影响较大。干燥温度越高,干燥污泥可磨性越好,球磨的污泥平均粒径越小,制得的污泥煤浆表观黏度越低;温度高于105℃,污泥的可磨性无明显差别,污泥煤浆的表观黏度亦无明显变化。污泥粒径越小,颗粒越细,一定程度上提高了煤粉的堆积效率,使污泥煤浆的表观黏度降低。     

Road dust pollution of Cd, Cu, Ni, Pb and Zn along Islamabad Expressway, Pakistan

Islamabad Expressway is one of the busiest roads in the capital of Pakistan. For the assessment of heavy metal pollution level in dust generated on the Expressway, 13 samples of dust were collected from various places around the highway and four samples of soil were obtained from the undisturbed green land in Islamabad. The samples were analyzed for five heavy metals using FAAS (flame atomic absorption spectrometry). The average concentration values of the metals Cd, Cu, Ni, Pb and Zn were found to be 5 ± 1, 52 ± 18, 23 ± 6, 104 ± 29 and 116 ± 35 mg kg^{- 1} respectively, which were generally lower than the values cited in literature. The inter-elemental correlation of Cu and Pb indicated that they belonged to common anthropogenic sources. The pollution level was estimated based on the geoaccumulation index (I_geo), the pollution index (PI), and the integrated pollution index (IPI). The values of IPI were in the following order: Cu > Pb > Zn > Cd > Ni. All the indices for the metals under consideration were either low or corresponded to middle level of pollution. The pollution level is expected to increase due to rapid urbanization of the area. Some protective measures have therefore been proposed.     

icp-ms法同时测定卷烟纸中元素铬、镍、铜、砷、硒、镉、铅

电感耦合等离子体质谱(icp-ms);卷烟纸;微波消解     

Determination of Cd, Co, Cr, Cu, Fe, Ni and Pb in Milk, Cheese and Chocolate

 Combined analytical procedures consisting of wet digestion step followed by instrumental determination – differential pulse cathodic stripping voltammetry (DPCSV) or electrothermal atomic absorption spectrometry (ETAAS) – as well as a direct analysis method – slurry sampling ETAAS – for the determination of Cd, Co, Cr, Cu, Fe, Ni and Pb in milk, cheese and chocolate are described and compared. Wet digestion using a mixture of HNO₃-HClO₄-H₂O₂ is proposed for complete matrix decomposition prior to trace analyte determinati on by DPCSV or ETAAS. A mixture of HNO₃-H₂O₂ is used for slurry preparation. Optimal instrumental parameters for trace analyte measurements are presented. The reliability of the procedures has been verified by analyzing standard reference materials. Results obtained are in good agreement with the certified values and the relative standard deviations (for these results) are in the range 5–10% for wet digestion DPCSV or ETAAS and 3–9% for slurry sampling ETAAS in the range of 2 μgċg⁻¹ (Cd) to 12 μgċg⁻¹ (Fe). Received August 24, 1999. Revision January 20, 2000.     

污泥水煤浆燃烧和污染排放特性研究

在3.2 MW 卧式炉中对污泥水煤浆和大同烟煤水煤浆进行了对比燃烧实验,分别研究了煤浆的着火、燃烧、结渣及污染物排放特性。结果表明,掺混 10%污泥的水煤浆着火容易,燃烧稳定,炉膛火焰分布均匀,燃烧和结渣特性均优于大同烟煤水煤浆。污泥的添加使水煤浆燃烧烟气中SO₂和NO_x的浓度偏高,实际应用中可通过加入固硫剂等方式缓解。污泥水煤浆在卧式炉中的燃烧状况较理想,为城市污泥资源化利用提供了一条可行的新途径。     

ICP—OES测定饰品中砷、镉、汞、铅总量的不确定度评定

在用ICP-OES检测重金属含量过程中,含量在仪器检出限以上的得出正值结果,在仪器检出限以下的往往会产生一些负值观测结果,对饰品中铅、镉、汞、砷总量测定过程产生的正值、负值观测结果（As：-9mg／kg;Cd：46mg／kg;Hg：-4mg／kg;Pb：81mg／kg）进行了不确定度评定,最后结合样品检出限给出报告为As：小于37mg／kg;Hg：小于48mg／kg;Cd：（46±4）mg／kg（k=2）;Pb：（81±8）mg／kg（k=2）。     

Simultaneous determination of fluoroquinolone and tetracycline antibacterials in sewage sludge using ultrasonic-assisted extraction and HPLC-MS/MS

A reliable method was proposed for the simultaneous determination of five fluoroquinolones (FQs) and two tetracyclines (TCs) in sewage sludge using ultrasonic-assisted extraction (USE) followed by SPE cleanup and high-performance liquid chromatography-mass spectrometry (HPLC-MS)/MS analysis with electrospray ionisation (ESI) in a positive mode. The USE conditions (e.g. extraction solvent, pH, and extraction cycles) and high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS) parameters were optimised. Quantification was performed by internal standard calibration in multiple reaction monitoring mode. Recoveries of the antibacterials ranged from 41 to 123%, with relative standard deviations within 17%. The sample-based limits of quantification were 10–63?ng?g^?1 dry weight (dw) for FQs (ciprofloxacin, enrofloxacin, lomefloxacin, norfloxacin, and ofloxacin) and 250–500?ng?g^?1 dw for TCs (tetracycline and oxytetracycline). The method was applied to determine the antibacterials in sewage sludge and sediment samples were collected from the Pearl River Delta, China. Ciprofloxacin, norfloxacin, and ofloxacin were frequently detected, ranging from 1052 to 17740?ng?g^?1 dw in dewatered sludge samples, 585–3545?ng?g^?1 dw in untreated solids, and 98–258?ng?g^?1 dw in an urban stream sediment sample, respectively. Lomefloxacin and enrofloxacin were also occasionally detected.     

Separation/preconcentration of trace amounts of Cr, Cu and Pb in environmental samples by magnetic solid-phase extraction with Bismuthiol-II-immobilized magnetic nanoparticles and their determination by ICP-OES

A new method for separation/preconcentration of trace amounts of Cr, Cu and Pb in environmental samples by magnetic solid-phase extraction (SPE) with Bismuthiol-II-immobilized magnetic nanoparticles and their determination by ICP-OES has been developed. The separation of the target analytes from the aqueous solution containing the target analytes and Bismuthiol-II-immobilized magnetic nanoparticles was simply achieved by applying external magnetic field. Optimal experimental conditions including pH, sample volume, eluent concentration and volume and co-existing ions have been studied and established. Under the optimal experimental conditions, the detection limits for Cr, Cu and Pb with enrichment factors of 96, 95 and 87 were found to be 0.043, 0.058 and 0.085 ng mL⁻¹ and their relative standard deviations (R.S.D.s) were 3.5%, 4.6% and 3.7% (n = 5, C = 2 ng mL⁻¹), respectively. The method was validated with certified reference material (GBW50009-88) of environmental water sample and the analytical results coincided well with the certified values. Furthermore, the method was successfully applied to the determination of target analytes in river and lake water samples. Compared with established methods, the proposed method is characterized with high enrichment factor, fast separation and low detection limits.     

Different Lubricating Oil Treatments for the Determination of Cu,Cr, Fe,Ni, Sb,Pb, and Zn by HR-CS FAAS

Abstract

Microwave-assisted acid decomposition, direct dilution in kerosene, and oil-in-water emulsion were evaluated as lubricating oil pretreatment procedures for Cu, Cr, Fe, Ni, Pb, Sb, and Zn determination by High-Resolution Continuum Source Flame Atomic Absorption Spectrometry (HR-CS FAAS). For wet digestion, results were compared with those obtained by Flame Atomic Absorption Spectrometry (FAAS). The ultrasound probe used in emulsions sonication contaminated samples with Cr, although better results have been observed for the other six elements in this condition. In general, recovery percentages ranging from 81–106% (Cu), 80–107% (Cr), 85–114% (Fe), 82–116% (Ni), 86–117% (Pb), 85–115% (Sb), and 81–114% (Zn) were obtained. The HR-CS FAAS showed to be faster and more sensitive than FAAS.     

The utilization of modified BCR three-step sequential extraction procedure for the fractionation of Cd, Cr, Cu, Ni, Pb and Zn in soil reference materials of different origins

A modified three-step sequential extraction procedure for the fractionation of heavy metals, proposed by the Commission of the European Communities Bureau of Reference (BCR) has been applied to the Slovak reference materials of soils (soil orthic luvisols, soil rendzina and soil eutric cambisol), which represent pedologically different types of soils in Slovakia. Analyses were carried out by flame or electrothermal atomic absorption spectrometry (FAAS or ETAAS). The fractions extracted were: exchangeable (extraction step 1), reducible-iron/manganese oxides (extraction step 2), oxidizable-organic matter and sulfides (extraction step 3). The sum of the element contents in the three fractions plus aqua-regia extractable content of the residue was compared to the aqua-regia extractable content of the elements in the origin soils. The accuracy obtained by comparing the determined contents of the elements with certified values, using BCR CRM 701, certified for the extractable contents (mass fractions) of Cd, Cr, Cu, Ni, Pb and Zn in sediment following a modified BCR-three step sequential extraction procedure, was found to be satisfactory.