Kinetics of the mercury(II)‐catalyzed substitution of coordinated cyanide ion in hexacyanoruthenate(II) by nitroso‐R‐salt

The kinetics and mechanism of Hg²⁺‐catalyzed substitution of cyanide ion in an octahedral hexacyanoruthenate(II) complex by nitroso‐R‐salt have been studied spectrophotometrically at 525 nm (λ_max of the purple‐red–colored complex). The reaction conditions were: temperature = 45.0 ± 0.1°C, pH = 7.00 ± 0.02, and ionic strength (I) = 0.1 M (KCl). The reaction exhibited a first‐order dependence on [nitroso‐R‐salt] and a variable order dependence on [Ru(CN)₆^4?]. The initial rates were obtained from slopes of absorbance versus time plots. The rate of reaction was found to initially increase linearly with [nitroso‐R‐salt], and finally decrease at [nitroso‐R‐salt] = 3.50 × 10^?4 M. The effects of variation of pH, ionic strength, concentration of catalyst, and temperature on the reaction rate were also studied and explained in detail. The values of k₂ and activation parameters for catalyzed reaction were found to be 7.68 × 10^?4 s^?1 and E_a = 49.56 ± 0.091 kJ mol^?1, ΔH^≠ = 46.91 ± 0.036 kJ mol^?1, ΔS^≠ = ?234.13 ± 1.12 J K^?1 mol^?1, respectively. These activation parameters along with other experimental observations supported the solvent assisted interchange dissociative (I_d) mechanism for the reaction. © 2008 Wiley Periodicals, Inc. Int J Chem Kinet 41: 215–226, 2009     

Kinetics and mechanism of the oxidation of iron(II) ion by chlorine dioxide in aqueous solution

The mechanism by which an excess of iron(II) ion reacts with aqueous chlorine dioxide to produce iron(III) ion and chloride ion has been determined. The reaction proceeds via the formation of chlorite ion, which in turn reacts with additional iron(II) to produce the observed products. The first step of the process, the reduction of chlorine dioxide to chlorite ion, is fast compared to the subsequent reduction of chlorite by iron(II). The overall stoichiometry is The rate is independent of pH over the range from 3.5 to 7.5, but the reaction is assisted by the presence of acetate ion. Thus the rate law is given by At an ionic strength of 2.0 M and at 25°C, k_u = (3.9 ± 0.1) × 10³ L mol^?1 s^?1 and k_c = (6 ± 1) × 10⁴ L mol^?1 s^?1. The formation constant for the acetatoiron(II) complex, K_f, at an ionic strength of 2.0 M and 25°C was found to be (4.8 ± 0.8) × 10^?2 L mol^?1. The activation parameters for the reaction were determined and compared to those for iron(II) ion reacting directly with chlorite ion. At 0.1 M ionic strength, the activation parameters for the two reactions were found to be identical within experimental error. The values of ΔH? and ΔS? are 64 ± 3 kJ mol^?1 and + 40 ± 10 J K^?1 mol^?1 respectively. © 2004 Wiley Periodicals, Inc. Int J Chem Kinet 36: 554–565, 2004     

Novel Dicyanoargentate Polymeric Membrane Sensors for Selective Determination of Cyanide Ions

The construction and general performance characteristics of three novel potentiometric PVC membrane sensors responsive to dicyanoargentate anion are described. The sensors are based on the use of magnesium(II)‐ and iron(II)‐phthalocyanines as neutral ionophores and iron(II)‐bathophenanthroline dicyanoargentate ion‐pair complex as an ion exchanger in plasticized PVC matrices. These sensors exhibit fast, stable and near‐Nernstian response (54–59 mV/decade) for the singly charged dicyanoargentate anion over the concentration range 1×10^?2–5.8×10^?6 M. Potentiometric responses of sensors based on metal phthalocyanines and iron(II)‐bathophenanthroline are stable over the pH ranges 5–7 and 5–12, respectively. The selectivity of the sensors are fairly good over most common anions. Use of the sensors for potentiometric determination of microgram quantities of cyanide ion after conversion into dicyanoargentate anions shows an average recovery of 99.5% and a mean standard deviation of ±0.5%. Determination of cyanide ions in some exhausted electroplating bath samples gives results that compare favourably well with data obtained using the solid‐state cyanide electrode.     

Kinetic studies of a catalyzed metalloporphyrin formation

Kinetics of the incorporation of mercury(II) ion in tetra (p-trimethylammoniumphenyl)porphine have been investigated in aqueous solution at 30.0°C and 0.2 M (NaNO₃) ionic strength. The reaction was found to be first order each in mercury(II) and the porphyrin. The forward (formation) and the reverse (dissociation) rate constants were found to be 1.9 ± 0.2 × 10³ M^?1 s^?1 and 7 ± 2 × 10⁶ M^?1 s^?1, respectively. Kinetics of zinc(II) incorporation in tetra(p-trimethylammoniumphenyl)porphine catalyzed by mercury(II) were also investigated. This catalysis is explained in terms of steady-state formation of mono mercury(II) porphyrin followed by zinc(II) displacement of mercury(II) ion from the porphyrin. Such a mechanism also illustrates the importance of porphyrin core deformation to metal incorporation.     

Kinetic studies on the metal(II) tartarate–peroxomonosulfate reaction

The kinetics of oxidation of tartaric acid (TAR) by peroxomonosulfate (PMS) in the presence of Cu(II) and Ni(II) ions was studied in the pH range 4.05–5.20 and also in alkaline medium (pH ～12.7). The rate was calculated by measuring the [PMS] at various time intervals. The metal ions concentration range used in the kinetic studies was 2.50 × 10^?5 to 1.00 × 10^?4 M [Cu(II)], 2.50 × 10^?4 to 2.00 × 10^?3M [Ni(II)], 0.05 to 0.10 M [TAR], and µ = 0.15 M. The metal(II) tartarates, not TAR/tartarate, are oxidized by PMS. The oxidation of copper(II) tartarate at the acidic pH shows an appreciable induction period, usually 30–60 min, as in classical autocatalysis reaction. The induction period in nickel(II) tartarate is small. Analysis of the [PMS]–time profile shows that the reactions proceed through autocatalysis. In alkaline medium, the Cu(II) tartarate–PMS reaction involves autocatalysis whereas Ni(II) tartarate obeys simple first‐order kinetics with respect to [PMS]. The calculated rate constants for the initial oxidation (k₁) and catalyzed oxidation (k₂) at [TAR] = 0.05 M, pH 4.05, and 31°C are Cu(II) (1.00 × 10^?4 M): k₁ = 4.12 × 10^?6 s^?1, k₂ = 7.76 × 10^?1 M^?1s^?1 and Ni(II) (1.00 × 10^?3 M): k₁ = 5.80 × 10^?5 s^?1, k₂ = 8.11 × 10^?2 M^?1 s^?1. The results suggest that the initial reaction is the oxidative decarboxylation of the tartarate to an aldehyde. The aldehyde intermediate may react with the alpha hydroxyl group of the tartarate to give a hemi acetal, which may be responsible for the autocatalysis. © 2011 Wiley Periodicals, Inc. Int J Chem Kinet 43: 620–630, 2011     

Cyanide ion selective solid contact electrode based on nickel complex of N,N′-bis-(4-phenylazosalicylidene)-o-phenylene diamine ionophore

A cyanide ion selective poly(aniline) solid contact electrode based on nickel complex of N,N′-bis-(4-phenylazosalicylidene)-o-phenylenediamine ionophore was successfully developed. The electrode exhibits a good linear response of 58.7 mV/decade (at 20 ± 0.2°C, r ² = 0.998) with in the concentration range of 1 × 10^?1.0-1 × 10^?6.0 M cyanide. The composition of this electrode was: ionophore 0.300, polyvinylchloride 0.300, 2-nitrophenyloctyl ether 0.670 (mass). This 2-nitrophenyloctyl ether plasticizer provides the best response characteristics. The electrode shows good selectivity for cyanide ion in comparison with any other anions and is suitable for use with aqueous solutions of pH 4.6–6.3. The standard deviations of the measured emf difference were ±1.92 and ±1.87 mV for cyanide sample solutions of 1.0 × 10^?2 M and 1.0 × 10^?3 M, respectively. The stabilization time was less than 183 s and response time was less than 38 s.     

Novel Copper(II)‐Selective Membrane Electrode Based on a New Synthesized Schiff Base

A PVC membrane electrode for copper(II) ion based on a recently synthesized Schiff base as a suitable ion carrier was constructed. The electrode exhibits a Nernstian slope of 28.3 ± 0.6 mV per decade of Cu²⁺ over a wide concentration range of 7.0 × 10^?6‐2.6 × 10^?2 M with a detection limit of 5.0 × 10^?6M in the pH range of 4.2–5.8. The response time is about 10s and it can be used for at least 1 month without any considerable divergence in potential. It was successfully applied as an indicator electrode in the potentiometric titration of copper ions.     

THE INTERACTION OF 2-AMINO-2-HYDROXYMETHYL-1,3-PROPANEDIOL WITH COBALT(II) AND MANGANESE(II) IONS

Abstract

The stepwise complex formation between 2-amino-2-hydroxymethyl-1,3-propanediol (TRIS) with Co(II) and Mn(II) was studied by potentiometry at constant ionic strength 2.0 M (NaClO₄) and T = (25.0 ± 0.1)°C, from pH measurements. Data of average ligand number (Bjerrum's function) were obtained from such measurements followed by integration to obtain Leden's function, F ₀(L). Graphical treatment and matrix solution of simultaneous equations have shown two overall stability constants of mononuclear stepwise complexes for the Mn(II)/TRIS system (β₁ = (5.04 ± 0.02) M^?1 and β₂ = (5.4 ± 0.5) M^?2) and three for the Co(II)/TRIS system (β₁ = (1.67 ± 0.02) × 10² M^?1, β₂ = (7.01 ± 0.05) × 10³ M^?2 and β₃ = (2.4 ± 0.4) × 10⁴ M^?3). Slow spontaneous oxidation of Co(II) solutions by dissolved oxygen, accelerated by S(IV), occurs in a buffer solution TRIS/HTRIS⁺ 0.010/0.030 M, with a synergistic effect of Mn(II).     

KINETICS OF FORMATION AND STABILITY CONSTANTS OF MONO AND BIS l-TYROSINE COMPLEXES OF Cu(II), Co(II), AND Ni(II)

Abstract

The kinetics and stability constants of l-tyrosine complexation with copper(II), cobalt(II) and nickel(II) have been studied in aqueous solution at 25° and ionic strength 0.1 M. The reactions are of the type M(HL)^(3-n)+ _n-1 + HL- ? M(HL)^(2-n)+_n(k_n, forward rate constant; k_-n, reverse rate constant); where M=Cu, Co or Ni, HL^? refers to the anionic form of the ligand in which the hydroxyl group is protonated, and n=1 or 2. The stability constants (K_n=k_n/k_-n) of the mono and bis complexes of Cu²⁺, Co²⁺ and Ni²⁺ with l-tyrosine, determined by potentiometric pH titration are: Cu²⁺, log K₁=7.90 ± 0.02, log K₂=7.27 ± 0.03; Co²⁺, log K₁=4.05 ± 0.02, log K₂=3.78 ± 0.04; Ni²⁺, log K₁=5.14 ± 0.02, log K₂=4.41 ± 0.01. Kinetic measurements were made using the temperature-jump relaxation technique. The rate constants are: Cu²⁺, k₁=(1.1 ± 0.1) × 10⁹ M ^?1 sec^?1, k_-1=(14 ± 3) sec^?1, k₂=(3.1 ± 0.6) × 10⁸ M ^?1 sec^?1, k^?2=(16 ± 4) sec^?1; Co²⁺, k₁=(1.3 ± 0.2) × 10⁶ M ^?1 sec^?1, k_-1=(1.1 ± 0.2) × 10² sec^?1, k₂=(1.5 ± 0.2) × 10⁶ M ^?1 sec^?1, k_-2=(2.5 ± 0.6) × 10² sec^?1; Ni²⁺, k₁=(1.4 ± 0.2) × 10⁴ M ^?1 sec^?1, k_-1=(0.10 ± 0.02) sec^?1, k₂=(2.4 ± 0.3) × 10⁴ M ^?1 sec^?1, k_-2=(0.94 ± 0.17) sec^?1. It is concluded that l-tyrosine substitution reactions are normal. The presence of the phenyl hydroxyl group in l-tyrosine has no primary detectable influence on the forward rate constant, while its influence on the reverse rate constant is partially attributed to substituent effects on the basicity of the amine terminus.     

THE EPR SPECTRA OF TETRADENTATE SCHIFF BASE COMPLEXES OF COPPER (II) II. N,N'-bis(salicylidene)ethylenediimine and 7-methyl-N,N'-bis (salicylidene)ethylenediimine

Abstract

The EPR spectra of single crystals of ⁶³Cu(II) doped N, N'-bis(salicylidene)ethylenediimine Ni(II), [Ni(sal)₂en] and 7-methyl-N, N'-bis(salicylidene)ethylenediimine Ni(II), [Ni(7-me sal)₂en] have been studied. The usual doublet spin-Hamiltonian parameters for the complexes have been found to be: Cu(II)[(sal)₂en]; g _z =2.192 ± 0.002; g _x =2.046 ± 0.004; g _y =2.049 ± 0.004; A _z =201.0 × 10^?4 cm^?1; A _x =29.3 × 10^?4 cm^?1; A _y =31.3 × 10^?4 cm^?1; A^N _z =12.6 × 10^?4 cm^?1; A ^N _x =14.5 × 10^?4 cm^?1; A ^N _y =15.7 × 10^?4 cm^?1; A ^H _z =6.3 × 10^?4 cm^?1; A ^H _x =7.3 × 10^?4 cm^?1; A ^H _y =7.9 × 10^?4 cm^?1; Cu(II)[(7-me sal)₂en]; g _z =2.189 ± 0.002; g _x =2.037 ± 0.004; g _y =2.046 ± 0.004; A _z =203.0 × 10^?4 cm^?1; A _x =36.9 × 10^?4 cm^?1; A _y =22.7 × 10^?4 cm^?1; A ^N _z =12.6 × 10^?4 cm^?1; A ^N _x =13.3 × 10^?4 cm^?1; A ^N _y =14.0 × 10^?4 cm^?1. Values of molecular orbital coefficients calculated for these complexes show that their bonding properties are similar to those of other compounds of this type. There is considerable covalency in the metal-ligand [sgrave]-bonds, and significant in-plane pi-bonding is present.     

The relaxation spectra of nickel(II) and cobalt(II) arginine complexes

The temperature-jump method has been used to determine the nickel(II)- and cobalt(II)-arginine complexation kinetics. In the pH range studied, the neutral form of the ligand, HL, is the attacking, as well as the complexed, ligand species. The reactions reported on are of the type where n = 1, 2, 3 and M is Ni or Co. At 25° and ionic strength 0.1M the association rate constants are: for nickel(II) k₁ = 2.3 × 10³(±20%), k₂ = 2.4 × 10⁴(±20%), k₃ = 3.5 × 10⁴(±40%) M^?1 sec^?1; for cobalt(II) k₁ = 1.5 × 10⁵(±20%), k₂ = 8.7 × 10⁵(±20%), k₃ = 2.0 × 10⁵(±40%) M^?1 sec^?1. Arginine binds to metal ions less well than homologous chelating agents due to the electrostatic repulsion arising from the positively charged terminus of the zwitterion. Kinetically, the effect appears in the association rate constants with nickel reactions more strongly influenced than cobalt.     

Characterization of Anilinepentacyanoferrate (II) and (III)

The anilinepentacyanoferrate (II) complex has been characterized in aqueous solution. The complex exhibits a predominant ligand field transition at λ_max = 415 nm with ?_max = 494 M^?1 cm^?1. The corresponding Fe(III) complex displays a strong absorption at λ_max = 700nm(?_max = 1.61×10⁴ M^?1 sec^?1) which can be assigned as a ligand to metal charge transfer transition. The rate constants of formation and dissociation for the Fc(II) complex are (3.14±0.18)×10² M^?1W^?1 and 0.985±0.005 sec^?1, respectively, at μ = 0.10 M LiClO₄, pH = 8 and T = 25°C. The cyclic voltammetry of the complex shows that a reversible redox process is observed with E_1/2 value of 0.51±0.01 V vs. NHE at μ = 0.10 M LiClO₄, pH = 8 and T = 25°C. The kinetic study of the oxidation of the Fe(II) complex by ferricyanide ion yielded the rate constant of the reaction k_et = (1.43±0.04)x10 M sec^?1 at μ = 0.10 M LiClO₄, pH = 8 and T = 25°C.     

Inhibition of Emulsin by D-Gluconhydroximo-1,5-lactone and Related Compounds

At pH 4.5 (citrate buffer), D -gluconhydroximo-lactone ( 2 ), the N-methylurethane 3 and the N-phenylurethane 4 inhibit competitively the hydrolysis of p-nitrophenyl β-D -glucopyranoside by emulsin. The IC₅₀ values of 2, 3 , and 4 were 1.6 × 10^?4, 1.0 × 10^?4, and 5.8 × 10^?6 M , respectively. The K_i values of 2 and 4 were 9.8 × 10^?5 and 2.3 × 10^?6 M , respectively, while D-glucono-1,5-lactone ( 1 ) showed IC₅₀ = 1.1 × 10^?4 M and K_i = 3.7 × 10^?5 M .     

Asymmetrical Schiff Bases as Carriers in PVC Membrane Electrodes for Cadmium (II) Ions

5‐[((4‐Methyl phenyl) azo)‐N‐(6‐amino‐2‐pyridin) salicylaldimine] (S₁), and 5‐[((4‐methyl phenyl) azo)‐N‐(2‐diamino‐2‐cyano‐1‐ethyl cyanide) salicylaldehyde] (S₂) with N and O donor atoms are effective ionophores to make Cd²⁺‐selective membrane electrodes. The electrodes based on S₁ and S₂ exhibits a Nernstian or near‐Nernstian response for cadmium ion over a wide concentration range 1.5×10^?1–7.5×10^?7 with a slope of 28 and 2.0×10^?1–4.0×10^?7 with a slope of 22, respectively. They have quick response and can be used for three or four months without any divergence in potential. The proposed sensors show fairly good selectivity over some alkali, alkaline earth, transition and heavy metal ions. The electrodes based on S₁ and S₂ can be used in the pH range 3.5–9. These electrodes were used as an indicator electrode in potentiometric titration of cadmium ion with EDTA and in the direct determination of cadmium ion in aqueous solutions.     

Highly Selective Salicylate Membrane Electrode Based on N,N＇- （Aminoethyl）ethylenediamide Bis（2-salicylideneimine） Binuclear Copper（Ⅱ） Complex as Neutral Carrier

A new ion selective electrode for salicylate based on N,N＇-（aminoethyl）ethylenediamide bis（2-salicylideneimine） binuclear copper（Ⅱ） complex [Cu（Ⅱ）2-AEBS] as an ionophore was developed. The electrode has a linear range from 1.0 × 10^-1 to 5.0 ×10^-7 mol·L^- 1 with a near-Nemstian slope of （ - 55 ±1 ） mV/decade and a detection limit of 2.0 × 10-7 mol·L^-1 in phosphorate buffer solution of pH 5.0 at 25 ℃. It shows good selectivity for Sal^- and displays anti-Hofmeister selectivity sequence： Sal^-〉SCN^-〉 ClO4^- 〉I^-〉 NO2^- 〉Br^-〉 NO3^- 〉Cl^-〉 SO3^2- 〉 SO4^2- The proposed sensor based on binuclear copper（Ⅱ）complex has a fast response time of 5-10 s and can be used for at least 2 months without any major deviation. The response mechanism is discussed in view of the alternating current （AC） impedance technique and the UV-vis spectroscopy technique. The effect of the electrode membrane compositions and the experimental conditions were studied. The electrode has been successfully used for the determination of salicylate ion in drug pharmaceutical preparations.     

Kinetic Study of the Reduction of Bromate Ion by Tris(1,10-Phenanthroline)Iron(II) and Aquoiron(II) Ions — Implication for the Bromate-Gallic Acid Oscillating Reaction

The kinetics of the bromate oxidation of tris(1,10-phenanthroline)iron(II) (Fe(phen)₃²⁺) and aquoiron(II) (Fe²⁺ (aq)) have been studied in aqueous sulfuric acid solutions at μ = 1.0M and with Fe(II) complexes in great excess. The rate laws for both reactions generally can be described as -d [Fe(II)]/6dt = d[Br^?]/dt = k[Fe(II)] [BrO^?₃] for [H⁺]₀ = 0.428–1.00M. For [BrO^?₃]₀ = 1.00 × 10^?4M. [Fe²⁺]₀ = (0.724–1.45)x 10^?2 M, and [H⁺]₀ = 1.00M, k = 3.34 ± 0.37 M^?1s^?1 at 25°. For [BrO^?₃]₀ = (1.00–1.50) × 10^?4M, [Fe²⁺]₀ = 7.24 × 10^?3M ([phen]₀ = 0.0353M), and [H⁺]₀ = 1.00M, k = (4.40 ± 0.16) × 10^?2 M^?1s^?1 at 25°. Kinetic results suggest that the BrO^?₃-Fe²⁺ reaction proceeds by an inner-sphere mechanism while the BrO^?₃-Fe(phen)₃²⁺ reaction by a dissociative mechanism. The implication of these results for the bromate-gallic acid and other bromate oscillators is also presented.     

Binding of Copper(II) to Pectins by Electrochemical Methods

The interaction between Cu(II) and pectin extracted from citrus fruit was studied in KNO₃ 0.10 mol dm^?3 at 25 °C and pH 5.5, using ion selective electrode potentiometry and voltammetry, namely differential pulse polarography and square‐wave voltammetry. Although many independent variables may affect Cu(II)‐polymer interactions such as charge density, polymer concentration and copper to polymer concentration ratio, a good fitting was observed for the model with ML and ML₂ complex species, when M:L total concentration (mol dm^?3) ratio varies from 0.2 to 2.7 and the ligand concentration is in the range (0.2 to 1) g dm^?3, i.e., (0.4 to 2)×10^?3 mol COO^? dm^?3. The complex parameters found in these conditions were log β_CuL=3.5±0.1 and log β_CuL2= 8.0±0.2. For lower total ligand and total metal ion concentrations, used in voltammetry, the interaction Cu(II)‐pectin is affected by a cooperative mode (increase of metal ion‐ligand affinity) when the total metal ion concentration increases and by an anti‐cooperative mode when the total ligand concentration increases, possibly due to different conformations of the polymer.     

Voltammetry of Dissolved Iron(III)–Nitrilotriacetate–Hydroxide System in Water Solution

The investigation of the dissolved iron(III)–nitrilotriacetate–hydroxide system in the water solution (I=0.1 mol L^?1 in NaClO₄; pH 8.0±0.1) using differential pulse cathodic voltammetry, cyclic voltammetry, and sampled direct current (DC) polarography, was carried out on a static mercury drop electrode (SMDE). The dissolved iron(III) ion concentrations varied from 2.68×10^?6 to 6×10^?4 mol L^?1 and nitrilotriacetate concentrations were 1×10^?4 and 5×10^?4 mol L^?1. By deconvoluting of the overlapped reduction voltammetric peaks using Fourier transformation, four relatively stable, dissolved iron(III) complex species were characterized, as follows: [Fe(NTA)₂]^3?, mixed ligand complexes [FeOHNTA]^? and [Fe(OH)₂NTA]^2?, showing a one‐electron quasireversible reduction, and binuclear diiron(III) complex [NTAFeOFeNTA]^2?, detected above 4×10^?4 mol L^?1 of the added iron(III) ions, showing a one‐electron irreversible reduction character. The calculations with the constants from the literature were done and compared with the potential shifts of the voltammetric peaks. Fitting was obtained by changing the following literature constants: log β₂([Fe(NTA)₂]^3?) from 24 to 27.2, log β₁([FeNTA]^?) from 8.9 to 9.2, log β₂([Fe(NTA)₂]^4?) from 11.89 to 15.7 and log β₂([Fe(OH)₂NTA]^3?) from 15.63 to 19. The determination of the electrochemical parameters of the mixed ligand complex [FeOHNTA]^?, such as: transfer coefficient (α), rate constant (k_s) and formal potential (E°') was done using a sampled DC polarography, and found to be 0.46±0.05, 1.0±0.3×10^?3 cm s^?1, and ?0.154±0.010 V, respectively. Although known previously in the literature, these four species have now for the first time been recorded simultaneously, i.e. proved to exist simultaneously under the given conditions.     

A Novel Flow‐Through Planar Solid Contact Sensor for the Determination of Lead with Potentiometric Anionic Response

The construction and general performance characteristics of two poly(vinyl chloride) matrix chemical sensors for lead were described. These sensors were based on the use of ion association complexes of trihydroxoplumbate, [Pb(OH)₃]^? and tetraiodoplumbate, [PbI₄]^2?with cetylpyridinium chloride (CP) and iron(II)‐4,7‐bathophenanthroline [Fe(bphen)₃]²⁺ as novel electroactive materials dispersed in o‐nitrophenyloctyl ether (o‐NPOE) plasticizer for ionometric sensor controls, respectively. The sensing membrane (3×5 mm) is immobilized on a wafer polyimide chip (size 13.5×3.5 mm) to offer a planar miniaturized design that could be easily used flow injection system. Under static modes of operation, the sensors revealed a near Nernstian response over a wide Pb²⁺ ion concentration range 7.9×10^?7 to 10^?4 and 3.2×10^?7 to 10^?4 mol L^?1 with detection limit of 100 and 45.5 ng mL^?1, respectively . In flow injection potentiometry, excellent reproducibility (RSD%=0.5%), fast response, high sensitivity, high sampling rate (50 sample h^?1) and stable baseline was observed in the presence of 5×10^?2 mol L^?1 NaOH and 10^?1 mol L^?1 KI as a carrier for [CP][Pb(OH)₃] and [Fe(bphen)₃][PbI₄] membrane based sensors, respectively. Validation of the assay method according to the quality assurance standards (range, within‐day repeatability, between‐day variability, standard deviation, accuracy, lower detection limit) reveals good performance characteristics and suggests application for routine determination of lead in industrial wastewaters and stack emissions of lead smelters. The results agree fairly well with data obtained by the standard atomic absorption methods.     

Characterization of Mercury – Humic Acids Interaction by Potentiometric Titration with a Modified Carbon Paste Mercury Sensor

Stability constant for mercury binding by commercial and natural humic acids (HA) were determined using a new potentiometric mercury(II) sensor based on dithiosalicylic acid modified carbon paste electrode. The sensor present a high selective and sensitive response to mercury(II) ions, and a low detection limit of 1.8×10^?8 M. The potentiometric titrations curves of humic acids against mercury(II) ions were modeled. For 1.00×10^?7 to 3.00×10^?4 M mercury(II) ion concentration levels the results are consistent with the presence of two different binding sites in the humic acid macromolecule. The strongest binding sites (log K₁ ranging from 10.1 to 6.8) are probably due to interaction with carboxylic acid and amine groups in the molecule, whereas weakest binding sites (log K₂ ranging from 8.8 to 4.5) can be associated to phenolic groups.