首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到9条相似文献,搜索用时 85 毫秒
1.
The control of the EOF direction and magnitude remains one of the more challenging issues for the optimization of separations in CE. In this work, we investigated the possibility to use variously charged polyanions for a fine-tuning of the EOF using polyelectrolyte multilayers. For that purpose, polyanions of poly(acrylamide-co-2-acrylamido-2-methyl-1-propanesulfonate) (PAMAMPS) with different chemical charge rates varying between 3 and 100% were used. These copolymers are statistic hydrophilic copolymers of acrylamide (AM) and 2-acrylamido-2-methyl-1-propanesulfonate (AMPS). The study of the influence of the chemical charge rate (AMPS molar proportion in the copolymer) on the electroosmotic mobility (mu(eo)) of a capillary modified by a polyelectrolyte bilayer (polycation/PAMAMPS) revealed that the fine-tuning of the EOF was possible, at least for cathodic or slightly anodic EOF (micro(eo) from -5 x 10(-5) to +35 x 10(-5) cm(2)V(-1)s(-1)). Electroosmotic mobility values were compared with the free-draining electrophoretic mobilities of the PAMAMPS constituting the last layer of the capillary coating. The stability of the EOF is discussed in detail on the basis of successive determinations of electroosmotic mobility and migration times. The application to the separation of a model peptide mixture demonstrated the interest (and the simplicity) of this approach for optimizing resolution and analysis time. Experimental resolutions were compared to the theoretical ones that we would obtain on a fused-silica capillary having the same EOF as the coated capillary.  相似文献   

2.
A method is presented to facilitate the non-target analysis of data obtained in temperature-programmed comprehensive two-dimensional (2D) gas chromatography coupled to time-of-flight mass spectrometry (GC×GC-ToF-MS). One main difficulty of GC×GC data analysis is that each peak is usually modulated several times and therefore appears as a series of peaks (or peaklets) in the one-dimensionally recorded data. The proposed method, 2DAid, uses basic chromatographic laws to calculate the theoretical shape of a 2D peak (a cluster of peaklets originating from the same analyte) in order to define the area in which the peaklets of each individual compound can be expected to show up. Based on analyte-identity information obtained by means of mass spectral library searching, the individual peaklets are then combined into a single 2D peak. The method is applied, amongst others, to a complex mixture containing 362 analytes. It is demonstrated that the 2D peak shapes can be accurately predicted and that clustering and further processing can reduce the final peak list to a manageable size.  相似文献   

3.
A simple, fast, and inexpensive procedure for sample preparation based on matrix solid‐phase dispersion was developed for the determination of Environmental Protection Agency 16 priority polycyclic aromatic hydrocarbons in indoor dust samples. Parameters that affect the extraction efficiency such as type of dispersant, elution solvent, and solvent volume were evaluated and optimized with the aid of experimental design and response surface methodology. Analysis was performed by HPLC coupled with UV‐Vis diode array detector (UV‐DAD). For verification, a GC coupled with a mass spectrometer in SIM mode was also applied. Recoveries obtained were from 53 to 120% for all target analytes with detection limits ranging from 0.2 to 10 ng/g and 0.2 to 2 ng/g for LC‐UV‐DAD and GC‐MS, respectively. The optimized method was used for the analysis of 11 household dust samples collected from private houses.  相似文献   

4.
5.
An industrial MCM‐41‐miniaturized matrix solid‐phase dispersion extraction coupled with response surface methodology was explored to determine L‐epicatechin, typhaneoside, isorhamnetin‐3‐O‐neohespeidoside, naringenin, kaempferol, and isorhamnetin in Pollen typhae by ultra‐high performance liquid chromatography connected to a photodiode array detection. Several variables were optimized in detail, including mesh number of sieve, type of adsorbent, mass ratio of sample to adsorbent, grinding time, methanol concentration, and elution volume. Central composite design was applied to optimize the best conditions for the maximum yields of the total flavonoids. The results displayed a good linear relationship (R > 0.9992) and the recoveries ranged from 92.9 to 103% (RSD < 4.53%) of the six flavonoids. The optimal method with high efficiency and low consumption was obviously better than heating reflux and ultrasonic extraction. It was proven that the developed industrial MCM‐41‐miniaturized matrix solid‐phase dispersion extraction coupled with simple ultra‐high performance liquid chromatography method could be a rapid and efficient tool for extraction and determination of flavonoids in natural products.  相似文献   

6.
《Electrophoresis》2018,39(2):377-385
SDS is commonly employed as BGE additive in CZE analysis of non‐enveloped icosahedral viruses. But the way by which SDS interacts with the surface of such viruses remains to date poorly known, making complicate to understand their behavior during a run. In this article, two related bacteriophages, MS2 and Qβ, are used as model to investigate the migration mechanism of non‐enveloped icosahedral viruses in SDS‐based CZE. Both phages are characterized by similar size and surface charge but significantly different surface hydrophobicity (Qβ > MS2, where ‘>’ means ‘more hydrophobic than’). By comparing their electrophoretic mobility in the presence or not of SDS on both sides of the CMC, we show that surface hydrophobicity of phages is a key factor influencing their mobility and that SDS‐virus association is driven by hydrophobic interactions at the surface of virions. The CZE analyses of heated MS2 particles, which over‐express hydrophobic domains at their surface, confirm this finding. The correlations between the present results and others from the literature suggest that the proposed mechanism might not be exclusive to the bacteriophages examined here.  相似文献   

7.
Four new zinc (II) complexes [Zn (HL1H)Br2] (1), [Zn (HL1H)Cl2] (2), [Zn2(HL2)Br3] (3), and [Zn (HL2)Cl] (4) have been synthesized by adopting template synthetic strategy and utilizing two homologous Schiff base ligands (H2L1 = 4-bromo-2-{[2-(2-hydroxyethylamino)-ethylimino]-methyl}-6-methoxyphenol, H2L2 = 4-bromo-2-{[3-(2-hydroxyethylamino)propylimino]methyl}-6-methoxyphenol), differing in one -CH2- unit in the ligating backbone, by adopting template synthetic strategy. All the complexes have been characterized by single crystal X-ray diffraction analysis as well as by other routine physicochemical techniques. Ligand mediated structural variations have been observed and rationalized by density functional theoretical (DFT) calculations. Interaction of the complexes 1–4 with Bovine Serum Albumin protein (BSA) has been studied by different spectroscopic techniques. A complete thermodynamic profile (ΔHo, ΔSo and ΔGo) was evaluated initially from the change in absorption and fluorescence spectra upon addition of BSA to the complexes. Appreciable binding constant values in the range ~ 0.94–4.51 × 104 M−1 indicate efficient binding tendency of the complexes to BSA with the sequence 1 ≅ 2 > 3 ≅ 4. Circular dichroism (CD), isothermal calorimetric titration experiments, molecular docking and molecular dynamics have been performed to gain deep insight into the binding regions of complex 1 to BSA. Experimental evidences suggest an interaction of zinc complexes at the surface of BSA protein and this particular binding has been exploited to determine unknown concentration of BSA protein. For this purpose complex 1 was explored as a BSA protein quantification tool.  相似文献   

8.
The inhibition of copper corrosion in aerated 0.1 mol l−1 hydrochloric acid solutions was studied using electrochemical polarization in the presence of different concentrations of benzotriazole and its two derivatives, 5-chloro and 5-methyl benzotriazole. The inhibition efficiencies obtained from cathodic Tafel plots increased markedly with increase in the additive concentration. Benzotriazole and 5-methyl-benzotriazole were found to be cathodic type corrosion inhibitors for concentrations higher than 10−4 mol l−1 . However, the 5-chloro-benzotriazole was found to be a mixed inhibitor for concentrations up to 10−3 mol l−1, above this concentration the inhibitor behaves as an anodic type inhibitor. The inhibitors are physisorbed on the copper surface following a Langmuir’s isotherm. The inhibition efficiencies depended on the inhibitor concentration and follows the order 5-chloro-benzotriazole > 5-methyl-benzotriazole > 1-H-benzotriazole. From the theoretical calculations, the change in the inhibition mechanism observed for 5-chloro-benzotriazole at concentrations higher than 10−3 mol l−1 is associated with the electronic acceptor characteristic of chloro, which increases the benzotriazole acidity allowing the formation of CuBTA.  相似文献   

9.
The metal–organic framework [(La0.9Sm0.1)2(DPA)3(H2O)3] was synthetized and characterized by X‐ray diffractometry, differential thermogravimetric analysis, and infrared spectroscopy. The material was tested for the development and validation of a matrix solid‐phase dispersion procedure for extraction of atrazine, bifenthrin, bromuconazole, clofentezine, fenbuconazole, flumetralin, procymidone, and pirimicarb, from peppers, with analysis using gas chromatography with mass spectrometry in the selected ion monitoring mode. The method developed was linear over the range tested (50.0–1000.0 μg/kg for procymidone and 200.0–1000.0 μg/kg for all other pesticides), with correlation coefficients ranging from 0.9930 to 0.9992. Experiments were carried out at 250.0, 500.0, and 1000.0 μg/kg fortification levels, and resulted in recoveries in the range of 52.7–135.0%, with coefficient of variation values between 5.2 and 5.4%, respectively, for [(La0.9Sm0.1)2(DPA)3(H2O)3] sorbent. Detection and quantification limits ranged from 16.0 to 67.0 μg/kg and from 50.0 to 200.0 μg/kg, respectively, for the different pesticides studied. The results were compared with literature data. The developed and validated method was applied to real samples. The analysis detected the presence of residues of pesticides procymidone, fenbuconazole, flumetralin, clofentezine, atrazine, and bifenthrin.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号