微机械加工的微结构型电化学传感器

微结构型电化学传感器是应用发展中的微机械加工技术结合传统的电化学传感技术创立的新一代的电化学传感器，而微机械加工技术与多种高新技术学科的相互交叉，又将拓宽微结构型电化学传感器研究的新领域。本文在简要介绍微机械加工技术的基础，对前类微结构型电化学传感器作了归纳，其中也提及作者年来来的研究工作，并对后者作一展望性评述。     

微系统科技的发展及电化学的新应用

本文根据田昭武在中国化学会第一届全国纳米技术与应用会议 (2 0 0 0 .11.2 8,厦门 )特邀大会报告内容整理而成 :1　微系统技术概述 (技术的必要性和前景 )2　发展微系统技术的特殊困难3　电化学在微系统技术中的应用　 3.1　用于复杂 3D 图形微加工的约束刻蚀剂层技术 (CELT)　 3.2　聚焦电泳和微系统在 (生物 )化学中的应用 (μ TAS或芯片上实验室 )　 3.3　芯片实验室中微流体输运网络的合理选择之一 -灵巧 (Smart)电渗泵4　结论     

纳米材料电化学与生物传感器——有机微污染物检测新途径

本文介绍了近年来纳米材料电化学与生物传感器在有机微污染物检测中的研究现状,分析了这些传感器中纳米材料修饰电极的特点,重点阐述了纳米材料在有机微污染物检测中的重要作用,列举了一些纳米材料电化学与生物传感器在有机微污染物检测中的应用。最后对纳米材料电化学与生物传感器用于有机微污染物的检测研究进行了简要评述和展望。     

电化学石英晶体微天平研究普鲁士蓝修饰电极

石英晶体徽天平(Quartz Crystal Microbalance,简称QCM)是一种非常灵敏的质量传感器,其检测能力可达ng级。QCM在化学中的早期应用是检测大气中的徽量成分,目前仍较活跃。由于石英压电晶体浸入溶液后在晶体/溶液界面存在较大的能量损失而不能够稳定振荡,致使QCM的应用较长时间局限于气相。八十年代初石英压电晶体在液相中的振荡终获成功,开辟了QCM应用的一个全新领域。液相中振荡成功后,QCM很快应用于电化学研究。目前已发展成为一种全新的电化学传感器——电化学石英晶体微天平(EQCM),并已用于金属电沉积、电化学腐蚀、电分析等方面的研究。     

石英晶体微天平（QCM）及其在电化学研究中的应用

本文文献综述近年来发展起来的石英晶体微天平(QCM)技术的理论、实验方法和它在电化学研究中应用的概况。     

高分子微球在电化学领域的应用

本文综述了近几年来高分子微球在电化学领域应用的研究进展。分别介绍了电场作用下微球悬浮液反射光谱的变化,包覆导电聚合物高分子微球的振荡电流和循环伏安特征和二茂铁基高分子微球电极反应的粒径效应,并对各类微球悬浮液的电化学行为及电极反应模型进行阐述。综述表明高分子微球电化学具有广阔的应用前景。     

用于细胞检测的微电极传感器设计及传感分析

本文针对肿瘤细胞的活性检测、神经细胞的神经递质检测与巨噬细胞等的氧化损伤检测等细胞检测中的核心问题,简要介绍电化学生化传感器和传感方法在细胞检测领域的应用和发展,重点对不同微电极结构的电化学传感器的设计制作、细胞检测方法及应用进展进行了综述。电化学生化传感器从单一检测电极向集成多功能和阵列式电极发展,从单个电极传感检测模式向芯片集成微电极式传感系统发展,而在其生物相容性、检测限和检测效率等方面尚需进一步提升和拓展。基于微机电系统(MEMS)技术制作的微电极研制,电极表面的多种化学和生物修饰的敏感膜研究,从硅基到聚合物柔性基底电极的材料拓展,小体积、植入式、可穿戴式的电化学生化传感器研制等是目前发展的方向,其在临床检验、精准医疗、运动健康监测、老年健康服务等诸多领域中显示出巨大的应用前景。     

基于微流体脉冲驱动控制技术的电化学微流控芯片制备方法

基于微流体脉冲驱动控制技术搭建了电化学微流控芯片的制备系统.首先将纳米银墨水和甘油溶液分别微喷射到玻璃基底表面形成微电极图形和微流道液体阳模图形;然后分别进行烧结和聚二甲基硅氧烷(PDMS)模塑工艺制得微电极和微流道;最后将微电极和微流道键合形成电化学微流控芯片.研究了系统参量对液滴产生的影响以及液滴直径和重叠率对液滴成线的影响,制得的微电极最小线宽为45 μm、厚度为2.2 μm、电阻率为5.2 μΩ·cm,制得的微流道最小线宽为35 μm,流道表面光滑.采用制得的电化学微流控芯片进行了葡萄糖浓度的电化学流动检测.结果表明,葡萄糖溶液的浓度与响应电流具有较高的线性关系,可对一定浓度范围内的葡萄糖溶液进行定量检测.基于微流体脉冲驱动控制技术的电化学微流控芯片制备方法具有微喷射精度高、重复性好,制备系统结构简单、成本低廉等优点,可用于生化分析、生物传感器等领域的芯片制备.     

电化学微/纳米加工技术

介绍电化学微／纳米加工技术，特别是厦门大学电化学微／纳米加工课题组建立起来的约束刻蚀剂层技术，旨在让广大师生了解这一特种加工技术，共同促进我国电化学微／纳米加工技术的研究及产业化进程。     

微反应器和微聚合反应器

微反应器是指容量仅为零点几μm^3或宽度为1μm左右的反应“容器”，反应在这个微小区域内有控地进行。以表面科学与微制造技术为核心，新型微反应器近年来发展很快。本文介绍五种微反应器，即反相胶束微反应器，聚合物微反应器，固体模板微反应器，微条纹反应器和微聚合反应器，以及它们在各高科技领域中的可能应用。     

Integration of electrochemistry in micro-total analysis systems for biochemical assays: Recent developments

Micro-total analysis systems (μTAS) integrate different analytical operations like sample preparation, separation and detection into a single microfabricated device. With the outstanding advantages of low cost, satisfactory analytical efficiency and flexibility in design, highly integrated and miniaturized devices from the concept of μTAS have gained widespread applications, especially in biochemical assays. Electrochemistry is shown to be quite compatible with microanalytical systems for biochemical assays, because of its attractive merits such as simplicity, rapidity, high sensitivity, reduced power consumption, and sample/reagent economy. This review presents recent developments in the integration of electrochemistry in microdevices for biochemical assays. Ingenious microelectrode design and fabrication methods, and versatility of electrochemical techniques are involved. Practical applications of such integrated microsystem in biochemical assays are focused on in situ analysis, point-of-care testing and portable devices. Electrochemical techniques are apparently suited to microsystems, since easy microfabrication of electrochemical elements and a high degree of integration with multi-analytical functions can be achieved at low cost. Such integrated microsystems will play an increasingly important role for analysis of small volume biochemical samples. Work is in progress toward new microdevice design and applications.     

Development of a multiplex microarray microsystem

A hybrid multiplex microarray microsystem has been developed that consists of 32 individually addressable array reaction chambers, supporting the use of multichannel pipettes for addition of up to 8 samples simultaneously. Discrimination between Campylobacter jejuni and Campylobacter coli bacteria was observed in DNA samples containing Campylobacter spp., with the same specificity and sensitivity as when compared to a full-size microarray. The spinloaded multiplex microarray microsystem described provides a novel and convenient test format for simultaneous low-density microarray analysis and is universally adaptable to other DNA, protein or small molecule microarray based applications.     

Rapid prototyping of polymer microsystems via excimer laser ablation of polymeric moulds

This study presents a novel method for rapid prototyping of polymer microsystems. The method is based on excimer laser ablation of a thermally and mechanically stable polymer, such as PEEK (poly-ether-ether-ketone). A negative of the desired microsystem is laser machined in PEEK, which can then be used directly for hot embossing or injection moulding of a series of prototypes. This approach is very rapid and considerably cheaper than more traditional approaches to toolmaking, while still performing well in terms of reproduction of tool dimensions. The reduction in time and cost for a master tool using this method opens up new possibilities for testing small series in the R&D phase of a microsystem. Finally, two particular applications of the technique are presented.     

Flow force augmented 3D suspended polymeric microfluidic (SPMF3) platform

Detection and study of bioelements using microfluidic systems has been of great interest in the biodiagnostics field. Microcantilevers are the most used systems in biodetection due to their implementation simplicity which have been used for a wide variety of applications ranging from cellular to molecular diagnosis. However, increasing further the sensitivity of the microcantilever systems have a great effect on the cantilever based sensing for chemical and bio applications. In order to improve further the performance of microcantilevers, a flow force augmented 3D suspended microchannel is proposed using which microparticles can be conveyed through a microchannel inside the microcantilever to the detection area. This innovative microchannel design addresses the low sensitivity issue by increasing its sensitivity up to 5 times than the earlier reported similar microsystems. Moreover, fabricating this microsystem out of Polydimethylsiloxane (PDMS) would eliminate external exciter dependency in many detection applications such as biodiagnostics. In this study, the designed microsystem has been analyzed theoretically, simulated and tested. Moreover, the microsystem has been fabricated and tested under different conditions, the results of which have been compared with simulation results. Finally, its innovative fabrication process and issues are reported and discussed.     

椭圆偏振光谱方法对电化学的研究及应用

椭圆偏振光在固体表面入射和反射后,光学参量△,Ψ及其所表征的偏振状态,将因固体表面膜的厚度、性质不同而发生相应的变化．测定△,Ψ及其变化规律、可为固体材料、表面膜厚度、表面或界面上发生的有关物理或化学变化等直接或间接地提供信息,其灵敏度可反映表面膜层０．１～０．０１ｎｍ厚度的变化．因此,椭圆偏振光谱（下称椭圆法）在固体物理、表面化学、金属表面腐蚀、生物大分子表面等研究领域具有重要价值［１］．该法能检测的表面膜厚相当于电极上的单分子层的尺寸,特别适用于从分子水平上研究电化学体系,是最灵敏的光谱电化…     

Polymer microfabrication methods for microfluidic analytical applications

A growing number of microsystem technology (MST) applications, particularly in the field of microfluidics with its applications in the life sciences, have a need for novel fabrication methods which account for substrates other than silicon or glass. We present in this paper an overview of existing polymer microfabrication technologies for microfluidic applications, namely replication methods such as hot embossing, injection molding and casting, and the technologies necessary to fabricate the molding masters. In addition, techniques such as laser ablation and layering techniques are examined. Methods for bonding and dicing of polymer materials, which are necessary for complete systems, are evaluated.     

How molecular electrochemistry may shine light by designing electrofluorochromic compounds

Luminescence and electrochemistry have been intimately associated for a long time in the framework of electrochemiluminescence, where the electrochemical signal triggers light emission through a redox reaction. More recently another aspect of this coupling has been developed in electrofluorochromism, where electrochemistry is used to monitor photoluminescence processes. This review aims to highlight some molecular structures allowing emission properties to be tuned electrochemically through either redox-active luminophores or dyads in which a redox moiety can (de)activate the luminescence of a nearby unit. The working principle and main applications are also briefly discussed.     

《碳纳米材料电化学》专辑序言 ——方兴未艾的电化学能量转换和存储先进材料和技术

可以预见,在相当一段时期内,能源和环境将是全球发展的两大主题. 其实,人类对能源的获取方式将对地球的生态环境和人类未来的生存状态和生活方式产生重要影响. 正因为如此,世界各国正在大力发展可再生能源和清洁能源. 电化学能源是将化学能高效转变为电能的一种能量转换方式,它历史悠久,但不断被改进和创新,尤其是近年来得到了较快的发展. 目前,电化学能源转换和存储器件主要包括一次电池（如锌锰电池等）、二次电池（如铅酸电池、镍氢电池、锂离子电池等）、燃料电池、金属-空气电池以及超级电容器等. 电化学能源和其它可再生能源相互补充、交叉利用将是未来清洁能源的主要发展方向.     

Electrochemistry of nanobubbles

Gas bubble formation is a common phenomenon in numerous electrochemical processes, such as water splitting, chloralkaline process, and fuel cells. Many efforts have been made to understand the behaviors of microsized or larger gas bubbles in electrochemical systems in the past few decades. It was not until recent years that the electrochemistry of nanosized gas bubbles (nanobubbles) has begun receiving attention. In this short review, we summarize recent advances in the field of electrochemistry of nanobubbles, ranging from new fundamental understandings of nanobubble behaviors to the development of novel bubble-based applications inspired by the basic research of nanobubble electrochemistry.