五孔剪切相机同时测量二维曲率,扭率和斜率

本文首次提出一种散斑剪切相机。该相机能把曲率、扭率和斜率的二维信息同时记录在一张双曝光散斑图上。对散斑图进行滤波分析时在频谱面上出现十三块互不重叠的衍射晕。在适当的衍射晕上滤波即可获得二维曲率、扭率和斜率的等值全场条纹。     

白光数字散斑照像术

本文提出一种新的数字散斑计量术——白光数字散斑照像术.它以两维数字偏心滤波技术实现全场信息的表征,而以数字相关技术实现点信息的表征.文中给出了计量方法、理论分析及实验结果.     

夹层散斑照相

本文提出一种新的散斑照相方法——夹层散斑照相,并且叙述它的简单原理及优点.这一方法类似于夹层全息照相,由二张单曝光散斑图组成,在不同的情况下拍摄散斑图,然后把其中二张放在一起并精确地复位.夹层散斑同普通双曝光散斑完全一样.如果我们拍摄n张单曝光散斑图,我们将获得n(n-1)/2对双曝光散斑图.众所周知,很难对瞬态过程或动态变形拍摄双曝光散斑图,但高速照相和夹层散斑照相的结合可以解决这些困难.文章的最后给出了精度的实验比较,结果表明,夹层散斑照相和双曝光散斑照相所获得的结果是完全相同的.无疑,夹层散斑照相将为散斑干涉的应用开辟新的途径.     

测量物体位移的数字白光散斑照相术

给出了一测量物体刚体位移的数字白光散斑照相术。数字傅里叶变换从双曝光字白光散斑图用来产生杨氏条纹。该杨氏条纹能够用数字傅里叶变换结合条纹重构进行自动分析。此外，给出一种条纹质量增强的方法。     

应用激光散斑干涉术测定非均匀微变形物体的应变分布

光学粗糙表面的物体受激光照射时,表面漫射的结果会产生随机分布的子波。子波在空间产生干涉,形成的干涉点称为散斑。本文利用双曝光拍摄了在金属园盘中心施加集中载荷时产生变形的散斑图,并对散斑图进行全场滤波。本文特点是利用滤波原理描述滤波后形成的像,拍摄出滤波后物体变形的局部斜率等值条纹,并根据条纹计算出物体各点的相对变势。     

续论散斑摄影滤波象及滤波孔的形状、大小及位置的关系

笔者曾在第16届国际高速摄影与光子学会议上推演了散斑摄影分析技术全场滤波时,双曝光散斑图的能量谱通过滤波后所形成像的函数方程。本文进一步论述滤波孔形状对滤波条纹像的影响。根据能谱分布进一步论述滤波孔位置与滤波像光强的关系。根据滤波最大截止频限给出滤波板设计的最大值。     

数字散斑技术在混凝土单轴压缩试验中的应用

数字散斑技术作为一种新兴的测量方法,它具有非接触、全场量测、精度高、操作简单等特点,随着计算机技术的迅猛发展,数字散斑技术得到了广泛的应用与研究。针对混凝土在外荷载作用下具有明显的非均匀变化的特征,借助传统的测量方法很难得到混凝土表面的全场变形结果的问题,结合数字散斑相关方法测量技术,开展了混凝土单轴压缩试验,拍摄了混凝土表面在单轴压缩过程中的位移与应变矢量场,为分析混凝土试件的损伤区域奠定了基础;与电测法测量结果进行了对比,其测量结果表明,这两种测量方法误差相对较小,且数字散斑技术能更早的发现混凝土表面的破坏,验证了数字散斑相关方法的准确性和可靠性。借助数字散斑技术可以更加方便准确的得到材料表面的变形场,这也将在一定程度上促进土木工程领域的发展,具有广阔的应用前景。     

散斑面内形变场检测系统设计

数字散斑测量是一种非接触、全场测量的高精度光测方法。该系统由散斑生成装置、数据采集装置和数据处理装置三部分组成。散斑生成装置将扩散的激光束投射到待测物体上,用接收屏接收物体散射生成的散斑图像。数据采集装置主要由CCD和数字采集卡组成,CCD拍摄散斑图像,并将其传输给数字采集卡,经采集卡转换成数字图像,以矩阵形式输入到数据处理装置。数据处理装置根据光学相关识别技术设计的检测程序对采集到的数字图像进行相关运算,通过对相关峰的准确定位来获取物体的形变信息。     

位移场双曝光散斑片的信号处理

用细氦氖激光束照射物体面内位移双曝光散斑片任一点,在其后可以接收到扬氏条纹图形,此图反映了散斑片被照点所包含的相对应物体面内位移场中对应点处的位移信息。通过对扬氏条纹图形进行分析处理,     

频闪剪切散斑干涉术的研究

提出了一种用于振动研究的方法——频闪剪切散斑干涉照相法。该方法由于采用了剪切镜,能得到较为精确的散斑剪切图,提高了测量的精度,是一种用于振动研究较为理想的散斑照相的新方法。讨论了频闪剪切散斑干涉术的基本原理,给出了频闪剪切散斑图的全场分析的平均光强分析的解析式,并给出了实验结果。理论和实验都表明频闪剪切散斑干涉照相法要优于时间平均剪切散斑干涉照相法。该方法在全场滤波分析时,能给出任一瞬时物体振动信息,得到清晰的、高衬比的全场干涉条纹图,是一种实用可行的方法。     

Optical evaluation methods in particle image velocimetry

Application of particle image velocimetry (PIV) techniques for measurement of fluid velocities typically requires two steps. The first of these is the photography step, in which two exposures of a particle field, displaced between the exposures, are taken. The second step is the evaluation of the double-exposure particle pattern and production of appropriate particle velocities. Each of these steps involves optimization, which is usually specific to the experiment being conducted, and there is significant interaction between photographic parameters and evaluation characteristics. This paper will focus on the latter step, that of evaluation of the double-exposure photograph. In several parts of a PIV system, some performance advantage may be obtained by increasing use of optical processing over conventional digital image processing. Among the processes for which a performance advantage may be obtained are parallel or multiplex image interrogation and the evaluation of the Young's fringe pattern obtained from the scattered pattern from the double-exposure photograph. This paper will discuss parallel image interrogation and compare the performance of optical and numerical Fourier transform analysis of Young's fringes using speckle images.     

基于图像处理技术的数字散斑照相

提出一种新的数字散斑照相计量方法,该方法研究将ＣＣＤ和计算机相结合,在自然光照下了对被测量物体照相,通过一种快的图像处理,直接提取物体变形信息。突破光测的激光照明及傅里叶变换模式,实现光测量技术真正自动化。     

Velocity and density field measurements by digital speckle method

Velocity and density field measurements based on image processing of laser speckle or pseudo-speckle pattern have been developed. Laser speckle velocimetry (LSV) or white-light speckle velocimetry (WSV), which corresponds to a high-image-density PIV, gives a local velocity vector map or whole field velocity contour map of a two-dimensional flow field seeded densely with fine particles. This technique has an advantage in high-speed flow measurement without limit of frame rate except for directional ambiguity. New techniques of laser speckle photography and laser speckle interferometry by means of digital image processing have been developed recently for density field measurements. In laser speckle photography, a local density gradient vector map is reconstructed by cross-correlation evaluation between the reference and the object speckle patterns. In laser speckle interferometry, an equi-density contour map is reconstructed by image subtraction between the reference and the object interferometric speckle patterns.     

旋转孔径散斑照相法用于动态三维位移场的研测

采用两套旋转孔径散斑照相系统对动态三维位移场进行了研测。一次实验可把缓慢连续变形体的动态三维位移场的整个变化过程记录于两张散斑图上．对散斑图进行全场滤波可摄取所有各时刻的三个位移分量的信息。     

Micro-experimental study for the stress effects on the interphase of composite materials

Digital speckle micro-metrology system, which is a combination of a long-focus microscope and a digital image-measuring device, is developed for studying the micro-mechanics behavior of the interphase of bimaterials. The natural texture of a specimen's surface is thought as a carrier of deformation's information and is analyzed to obtain the displacement field in each step, strain field and their real-time variation of the interphase. The resolution of the micro-metrology system is 10 nm for in-plane displacements. In this paper, the micro-metrology system is employed to investigate the micro-mechanics behavior of the interphase under thermal impulsing. The experimental results show that the interphase is the main factor affecting the mechanical characteristic of the whole composite structure.     

Numerical computation of in-plane displacements and their detection in the near field by double-exposure objective speckle photography

A model of a rough surface to the scale of the optical wavelength is proposed, with randomly distributed zero-mean Gaussian heights. It is assumed that the aforesaid surface is illuminated by a coherent light beam of homogeneous intensity. An in-plane pure translation of this surface is simulated on a PC by means of the Matlab program. In the near-field optical regions the Fraunhofer approximation and the subsequent FFT are not suitable for application in the generation of a speckle pattern. Hence, with the aim of calculating the translation of the rough surface by means of double-exposure objective speckle photography using the point-wise filtering technique (PWFT), the Fresnel-Kirchhoff integral is first employed to obtain the speckle intensity near the surface on a photographic plate, and then the intensity pattern produced by the diffraction of the plate is determined in the far field (Fraunhofer), which suffices to calculate the modulus of displacement through the Young’s fringes. The results are analyzed according to surface roughness and the sample distance to the recording plane.     

Characterizing Young's fringes’ orientation and spacing by Fourier transform and Radon transform

Orientation and spacing are important features of fringe patterns, especially in speckle photography when the displacement information of the object is determined by pointwisely filtering the double-exposure specklegram. The Fourier transform and Radon transform are both simple and effective tools for solving this problem, which extract the information in spectral domain and spatial domain, respectively. A hybrid method combining Radon transform and Fourier transform is also possible. The results can be further improved by enhanced Fourier transform and enhanced Radon transform. The theories, as well as real applications, are given in this paper.     

Study on the reduction of speckle noise in the reconstructed image of digital hologram

As one of the most important 3-D display technique, reduction of speckle noise in the reconstructed image of digital holography should be grounded on the digital hologram itself. Based on the whole process of the recording and reconstruction of digital holography, the optical distributions of recorded object and reconstructed image of digital holography have been studied. It has been proposed that the root formation cause of speckle noise in its reconstructed image is the speckle noise formed on the recorded object surface when illuminated by coherent light because of its optical roughness. A novel approach has been presented to reduce speckle noise in digital holography by changing the interference structure of hologram itself. First, by reducing the speckle noise in the reconstructed image, the distribution of ideal reconstruction light with reduced speckle noise is acquired. Then in turn, taking the ideal reconstruction light with reduced speckle noise as ideal object light, a new hologram can be rebuilt, which can reconstruct the ideal object light. The experimental results are given to confirm the proposed method. Therefore, it offers a brand-new thought and practical way to reduce the speckle noise in the reconstructed image of digital holography.