Metal ion sensing novel calix[4]crown fluoroionophore with a two-photon absorption property

1,3-Alternate calix[4]arene-based fluorescent chemosensors bearing two-photon absorbing chromophores have been synthesized, and their sensing behaviors toward metal ions were investigated via absorption band shifts as well as one- and two-photon fluorescence changes. Free ligands absorb the light at 461 nm and weakly emit their fluorescence at 600 nm when excited by UV-vis radiation at 461 nm, but no two-photon excited fluorescence is emitted by excitation at 780 nm. Addition of an Al(3+) or Pb(2+) ion to a solution of the ligand causes a blue-shifted absorption and enhanced fluorescence due to a declined resonance energy transfer (RET) upon excitation by one- and two-photon processes. Addition of a Pb(2+) ion to a solution of 1.K(+) results in a higher fluorescence intensity than the original 1.Pb(2+) complex regardless of one- or two-photon excitation, due to the allosteric effect induced by the complexation of K(+) with a crown loop.     

Fluoride sensing with a PCT-based calix[4]arene

Novel calix[4]arene-based anion sensor 1 with two coumarin units attached via amido functions acting also as binding sites is presented. Complexation of F⁻ by PCT-based 1 causes selectively red-shift in UV-vis absorption and in fluorescence emission due to H-bonding followed by deprotonation of NH-amide groups.     

Synthesis and fluorescence sensing properties of novel pyrene-armed calix[4]arene derivatives

Fluorogenic tert-butylcalix[4]arenes bearing two pyrene pendant groups at the lower rim were synthesized. Based on ratiometric changes of monomer and excimer emissions, the pyrene amine derivative of calix[4]arene has been found to act as a selective sensor for Pb²⁺ and Cu²⁺ ions, respectively, due to a conformational change upon chelation of these ions.     

The synthesis of calix[4]crown based dendrimer

A second generation of dendrimer with calixcrown as repeat unit was first synthesized. Its structure and conformation was determined by ¹H NMR and MALDI-TOF mass spectra.     

An excimer-based, binuclear, on-off switchable calix[4]crown chemosensor

A new fluorescent chemosensor with two different types of cation binding sites on the lower rims of a 1,3-alternate calix[4]arene (1) is synthesized. Two pyrene moieties linked to a cation recognition unit composed of two amide groups form a strong excimer in solution. For 1, the excimer fluorescence is quenched by Pb2+, but revived by addition of K+ to the Pb2+ ligand complex. Thus, metal ion exchange produces an on-off switchable, fluorescent chemosensor. Computational results show that the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbitals (LUMO) of the two pyrene moieties interact under UV irradiation of 1 and its K+ complex, while such HOMO-LUMO interactions are absent in the Pb2+ complex.     

Selective sensing of Hg2+ by a proton-ionizable calix[4]arene fluoroionophore

A fluorogenic derivative of a calix[4]arene with two proton-ionizable N-(phenyl)sulfonyl carboxamide-containing side arms in the 1,3-positions on the lower rim is employed for the selective sensing of Hg²⁺ at low concentration levels in water/MeCN (1:1, v/v) solutions containing Pb²⁺ and Cd²⁺. All three metal ions quench the fluorescence of the ligand in pure MeCN. However, in water/MeCN mixed solvent, the recognition of such cations occurs differently as only Hg²⁺ complexation quenches the fluorescence of the calixarene. Experiments carried out in the presence of an acid and a bulky non-complexing cation shows that the quenching of the calixarene fluorescence upon Hg²⁺ addition is likely due to proton displacement from the proton-ionizable side arms of the ligand. The system may be employed as a simple tool for the selective and efficient mercury sensing in mixed water/organic solvent.     

Cesium ion selective electrode based on calix[4]crown ether-ester

The potentiometric response characteristics of cesium ion selective PVC membrane electrode employing calix[4]crown ether-ester as an ionophore were investigated. The electrode exhibit a good response for cesium ion over wide concentration range of 5.0x10(-6)-1.0x10(-1) M with a Nernstian slope of 59 mV per decade. The detection limit of electrode is 5.0x10(-6) M. The electrode was found to have selectivity for cesium ion over alkali, alkaline and transition metals. The response time of the electrode is less than 20 s and can be used for more than 4 months without observing any divergence in potentiometric response. The electrode response was stable over wide pH range.     

2]Catenane assembly from calix[4]arene crown ethers [In Process Citation

A variety of novel calix[4]arene-incorporating crown ethers with or without intramolecular hydrogen bonding have been prepared by two efficient methods and utilized as donor rings to assemble calix[4]arene [2]catenanes based on pi-stacking interaction between hydroquinone and bipyridinium units. Treatment of calix[4]arene crown ethers 4, 10a, or 10b, whose cone conformation was fixed by intramolecular hydrogen bonding within the calix[4]arene moiety, with dicationic salt 15 x 2PF6 and dibromide 16 afforded the corresponding [2]catenanes 17a x 4PF6, 17b x 4PF6, and 17c x 4PF6 in 20%, 53%, and 55% yields, respectively, whereas from the reactions of 15 x 2PF6 and dibromide 16 in the presence of conformationally flexible 11 or 12 with a cone conformation kept by two propyl groups, [2]catenanes 18 x 4PF6 and 19 x 4PF6 were obtained in 12% and 6% yields. [2]Catenanes 21a x 4Cl, 21b x 4Cl, and 21c x 4Cl, incorporating calix[4]arene in both the donor and acceptor rings, were also successfully assembled from 10a or 10b, 16, and dicationic salts 20a x 2PF6 or 20b x 2PF6. The dynamic 1H NMR and absorption spectra of the [2]catenanes have been investigated, which revealed a strongest donor-acceptor interaction in 17a x 4PF6 and that the cone [2]catenanes 17a-c x 4PF6 can isomerize to the partial cone isomer at high temperature. The difference of the dynamic properties of these catenanes was discussed. The results demonstrate that catenation is one new general method to change the conformational distributions of calix[4]arenes.     

A new member of the calix[4]crown family:Facile synthesis and characterization of a calix[4]crown-9 cone conformer

25,27-Dipropoxy-p-tert-butylcalix[4]crown-9 cone conformer 5 was readily synthesized via an intramolecular cyclization strategy in good yields.The structures of all the new compounds involved were confirmed by NMR,ESI-MS and elementalanalyses.All of them were proved to be in the cone conformation.     

Triazole-modified calix[4]crown as a novel fluorescent on-off switchable chemosensor

A novel fluorescent on-off switchable chemosensor 1 with two different types of cationic binding sites is synthesized, which is composed of a triazole-modified calix[4]crown in the 1,3-alternate conformation. Among 15 metal ions examined, the fluorescence of 1 was strongly quenched by Hg2+, Cu2+, Cr3+, and Pb2+; however, the revival of emission from the strongly quenched 1.Pb2+ complex was achievable by the addition of K+, Ba2+, or Zn2+ ions. Thus, metal ion exchange can trigger an on-off switchable fluorescent chemosensor.     

UV band Splitting of chromogenic azo-coupled calix[4]crown upon cation complexation

Calixcrown-6 compounds carrying a pair of phenylazo moieties on the upper rim and two OH groups, one OH group, and two OR groups on the lower rim have been prepared in both the cone and partial cone conformations. UV/vis spectral measurements showed a red shift upon the addition of Ca2+ to the calixcrown carrying two OH groups and a blue shift for the calixcrown carrying two OR groups. For the compounds with two OR groups on the lower rim and a fixed partial cone conformation, a blue shift caused by electrostatic interaction between the oxygen atoms of OR and the metal ion as well as a red shift caused by the pi-metal complexation between the rotated calix benzene and the metal ion were observed.     

Lanthanoid coordination with a tetrazole-substituted calix[4]diquinone and calix[4]dihydroquinone

The tetrazole-functionalised calixdiquinone 5,17-di-tert-butyl-26,28-bis-(1H-tetrazole-5-ylmethoxy)-calix[4]-25,27-diquinone Q was synthesised by chemical oxidation of the bis-tetrazole calix[4]arene precursor using PbO₂/HClO₄. The single crystal X-ray structure determination of Q confirmed the structure and showed binding of a water molecule in the solid state. Chemical reduction of Q to the dihydroquinone QR was achieved using N,N-diethylhydroxylamine. Comparison of the solution phase photophysical properties of Q or QR in the presence of terbium ions showed significant excitation only with QR, suggesting redox switching of the photophysical response may be possible with this or similar receptor.     

Halo-derivatised calix[4]tubes

Halo functionalisation of calix[4]tubes has been investigated through both derivatisation of individual calix[4]arenes and calix[4]tubes, using classical synthetic methods, to allow preparation of a series of novel derivatives. The solution and solid state properties are in accordance with the constituent[4]arenes adopting flattened cone arrangements which on complexation with potassium simplify to a regular cone. Electrospray and 1H NMR studies, combined with molecular modelling have been used to ascertain the metal binding of this new series of cryptand like ionophores, demonstrating their retained selectivity for binding potassium over other Group 1 metals and the dependence on counter anion in the weak binding of silver.     

N-confused calix[4]pyrroles

This is a first review devoted to N-confused calix[4]pyrroles (NCCPs). NCCPs are a relatively recent arrival to the family of the pyrrole-based anion binding macrocycles, being for the first time identified in 1999. Yet, in a relatively short time these calix[4]pyrrole (CP) isomers attracted attention of the community of research groups interested in anion binding and sensing. This is because they are relatively easy to synthesize, but mainly because they posses anion-binding properties that are different from that of regular calix[4]pyrroles. The difference in anion-binding properties stems from a different binding mode between the NCCP and anion. While the regular CPs adopt in the complex an ideal cone-like conformation where all four pyrroles-NHs engage in hydrogen bonding to the anion, the inverted pyrroles do not allow forming the cone. NCCPs bind anions via a confused cone (CC), by three NH hydrogen bonds with an anion and a CH–anion contact. This different binding mode results also in different anion-binding affinity and selectivity compared to regular CPs. Also, the inverted pyrroles offer a unique possibility for selective chemical modification of the receptor. The corresponding colorimetric sensors were tested for anion binding applications. The results of colorimetric assays for anions are presented and potential applications discussed.     

Pentapyrrolic calix[4]pyrrole

A new calix[4]pyrrole has been synthesised that contains a 3,4,5-trisbromopyrrole appended to a meso-position which shows enhanced anion affinity as compared to the parent meso-octamethylcalix[4]pyrrole macrocycle.     

A proton-doped calix[4]arene-based conducting polymer

Segmented conducting polymers based upon a calix[4]arene scaffold are reported. The cone conformation creates a zigzag orientation of the polymer segments. Their acid-dependent conductivities are similar to the strong pH conductivity dependence of polyaniline which is said to be acid dopable. On the other hand, they have a segmented structure that imposes greater localization of the carriers. The conductivity of such a system can be considered to result from rapid self-exchange between discrete units. Hence, electron exchange between radical cations and p-diquinone salts produces the high conductivity of these polymers.     

Synthesis of novel calix[4]crown telomers and selective extraction of cesium ions

p-tert-Butylcalix[4]diazacrown-4 telomer, which contains hard and soft ion binding sites, was synthesized. It exhibited high selectivity toward cesium ions. The binding sites may complex alkali metal ions selectively.     

A novel redox-active calix[4]arene-tetrathiafulvalene dyad

A novel redox-active calix[4]arene-TTF 5 was prepared by the reaction of p-tert-butylcalix[4]arene 4 with the tosylated TTF 3 in the presence of cesium fluoride. The structure of the dyad 5 was identified by X-ray diffraction analysis, and the preliminary electrochemical properties of 5 were investigated by cyclic voltammetry (CV), for which two reversible one-electron waves were observed. Moreover, the UV-vis absorption spectra studies show that the dyad 5 undergoes progressive oxidation at the TTF moiety in presence of increasing amounts of Cu²⁺ or Hg²⁺.