Calix[4]arenes containing ferrocene amide as carboxylate anion receptors and sensors

Calix[4]arene derivatives containing amide ferrocene units at the wide rim and ethyl ester groups at the narrow rim, L1-L3, were synthesized and their anion binding and sensing properties were investigated. It was found from (1)H NMR titrations that L1-L3 were able to bind selectively with carboxylate anions. Moreover, cyclic voltammetry and square wave voltammetry showed that L1-L3 were able to act as electrochemical sensors for carboxylate anions. [structure: see text]     

New redox anion receptors based on calix[4]pyrrole bearing ferrocene amide

Two redox anion receptors based on calix[4]pyrrole and ferrocene have been synthesized. The electrochemical investigation revealed that these compounds can be response to the anions with different shifts of Fc/Fc⁺ couple. With the ¹H NMR titration study, the selectivity to F⁻ and AcO⁻ ions in CD₃CN solution was confirmed. The conformations of the mono-aromatic meso-substituted calix[4]pyrroles, which were the synthetical intermediate of the ferrocene based receptors, and their anion complexes in the solid state have also been studied by single X-ray crystallography, and the rationality of the crystal conformations was proved by theoretical study.     

Metal-assembled anion receptors

This review describes the self-assembly of anion receptors from organic ligands and transition metal ions. These metal-assembled anion receptors can be synthesised from a number of different species; bidentate ligands with metals that prefer octahedral coordination geometries and monodentate ligands with metals that prefer square planar geometries are common. Anion binding transition metal helicates and systems where the coordination of metal ions results in the formation of an anion receptor by conformational locking are also reported. The effect of anion binding on the different properties of these complexes is discussed.     

Competitive coupling of amide anion over menthyl propionate anion with aryl radical

A competitive coupling of amide anion over menthyl propionate anion with aryl radicalin photo-S_(RN) 1 mechanism was encountered. The rcaction afforded N-aryl propionic amide in excel-lent yield. In contrast, the expected nucleophilic photo-S_(RN) 1 substitution originating from the carb-anion was observed in the case of t-butyl propionate. According to the proposed mechanisms and MOcorrelation diagrams of the coupling step of nucleophiles with aryl radical, the interesting con-trast is reasonably attributed to the variation in energy gap between π~*c-o and π~*Ar of (ArNu)-Usually, the odd electron of (ArNu)- is weightly populated at π~*c-o, however, the diminished priv-ilege of π~*c-o in menthyl propionate promotes a dominant population of the odd electron at π~*Ar,which leads to the fragmentation of (ArNu)- into the starting carbanion and aryl radical.     

Ammonium based anion receptors

Selective anion recognition has been a tremendous challenge to chemists over the decades. However, with the advent of the concepts inherent in ‘supramolecular chemistry,’ the field now flourishes. Of the major types of receptors, polyamines have been studied widely as anion hosts by a number of researchers. Both electrostatic interactions and hydrogen bonds between protonated amines and the anion guests govern the binding in these systems. Exceptions to this rule are found in the quaternary ammonium systems, which utilize primarily electrostatic interactions and topological complementarity for binding purposes. This review focuses only on amine-based hosts, and is divided into acyclic and macrocyclic categories, the latter of which are based on cyclic dimension. The resulting four categories are: acyclic, monocyclic, bicyclic, and polycyclic. Within the major categories, binding is discussed according to the nature of the anion target, i.e. ‘simple’ inorganic anions, organic anions, and anionic metal complexes.     

2,5-Diamidofuran anion receptors

3,4-Diphenylfuran-2,5-dicarboxylic acid bis-N-phenylamide 1 and 3,4-biphenyl-furan-2,5-dicarboxylic acid bis-N-butylamide 2 have been synthesised and shown to act as fluoride selective anion receptors in DMSO-d₆/0.5% water solution.     

Ferrocene-based anion receptor bearing amide and triazolium donor groups

A novel ferrocene-based anion receptor bearing amide and triazolium donor groups and its anion complexation have been reported. We found that it shows marked electrochemical selectivity to F(-), followed by AcO(-) > Cl(-) > Br(-) > I(-), which is in accordance with (1)H NMR titration results.     

Adamantane-dipyrromethanes: novel anion receptors

New adamantane-dipyrromethanes (AdD 1-4) were synthesized and their anion binding properties investigated. AdD 1-3 form 2:1 complexes with F⁻ (AdD:F = 2:1) characterized by high association constants, and 1:1 complexes with Cl⁻, Br⁻, and . The binding of Cl⁻, Br⁻, and by AdD 1-3 is 2-3 times stronger than for the reference compound, meso-phenyldipyrromethane (5). However, AdD 4 forms complexes with F⁻ characterized by 1:1 and 1:2 stoichiometry (AdD:F = 1:2).     

Acridinone-based anion receptors and sensors

The interaction of a variety of acridinone derivatives containing hydrogen-bond donor groups in the 4- and 5-positions with anions demonstrate the potential of this new scaffold in anion receptor and sensor design.     

Pyrazole complexes as anion receptors

The behavior of the receptors [Re(CO)3(Hdmpz)3]BAr'4 (Hdmpz = 3,5-dimethylpyrazole) (1) and [Re(CO)3(HtBupz)3]BAr'4 (HtBupz = 3(5)-tert-butylpyrazole) (2; Ar' = 3,5-bis(trifluoromethyl)phenyl) toward the anions fluoride, chloride, bromide, iodide, hydrogensulfate, dihydrogenphosphate, nitrate, and perrhenate was studied in CD3CN solution. In most cases, the receptors were stable. Anion exchange was fast, and binding constants were calculated from the NMR titration profiles. The structure of the adduct [Re(CO)3(HtBupz)3] x NO3 (3) was determined by X-ray diffraction. Two pyrazole moieties are hydrogen-bonded to one nitrate oxygen atom, and the third pyrazole moiety is hydrogen-bonded to an oxygen atom of an adjacent nitrate, leading to infinite chains. The structure of the adduct [Re(CO)3(Hdmpz)3]BAr'4acetone (4), also determined by X-ray diffraction, showed a similar interaction of two pyrazole N-H groups with the acetone oxygen atom. F- and H2PO4(-) deprotonate the receptors, and HSO4(-) decomposed 1. The structure of one of the decomposition products (5), determined by X-ray diffraction, is consistent with pyrazole protonation and substitution by sulfate.     

Biaryl-based anion receptors bearing thiourea groups: fluoride anion receptor

The synthesis, characterization and binding studies with anions for biaryl-based anion receptors bearing thiourea groups have been described. The results revealed that receptors (1 and 2) showed good selectivity and binding affinity for F^?, and among them binaphthyl-based receptor (1a) showed the best binding affinity for F^? in comparison to other tested anions (Cl^?, Br^?, I^?, $ {\text{NO}}_{3}^{ - } ,\;{\text{HSO}}_{4}^{ - } , $ AcO^? and $ {\text{H}}_{2} {\text{PO}}_{4}^{ - } $ ). This is probably due to the fact that the moderate rigidity of binaphthyl skeleton in 1a is able to provide the better geometry of two thiourea groups for incorporating F^? into the binding pocket. The higher basicity of F^? also participated in this selectivity.     

Ruthenium biimidazole complexes as anion receptors

The behavior of the compound [RuCl(cym)(H2biim)][BAr'4] (cym = eta6-para-isopropylmethylbenzene, Ar' = 3,5-bis(trifluoromethyl)phenyl), synthesized from [[RuCl(cym)]2(mu-Cl)2], H2biim and NaBAr'4, has been studied as a receptor of anions both in solution and in the solid state.     

Sulfonamide carbazole receptors for anion recognition

Carbazole-based receptors functionalized with two sulfonamide groups have been synthesized and their properties as anion receptors have been evaluated. The receptor with bis(trifluoromethyl)aniline groups has shown a very high affinity for halide ions, especially remarkable as only two hydrogen bonds are formed in the complexes. (1)H NMR and fluorescence titrations have been carried out and binding constants up to 7.9 × 10(6) M(-1) have been reached. X-ray structures have been obtained and a modelling study has shown the possible reasons for the large affinity of these compounds for halide anions.     

Contra-Hofmeister anion extraction by cyclosteroidal receptors

Steroid-based receptors with enclosed binding sites, formed from quaternary ammonium and macrocyclic bis-urea units, can substantially override the Hofmeister series in anion phase transfer experiments.     

Quinoxaline-oligopyrroles: improved pyrrole-based anion receptors

Novel quinoxaline derivatives bearing dipyrromethane or tripyrromethane substituents act as improved anion receptors as compared to the unsubstituted dipyrrolylquinoxaline core from which they are derived.     

Polyaza metacyclophanes as ditopic anion receptors

Five macrocyclic polyaza metacyclophanes L1-L5 prepared by dipode coupling of the tosylated precursors have been studied. The basicity of the ligands has been measured potentiometrically and their ability to complex halides and perchlorate has been studied in the solid state by X-ray crystallography. The results reveal that the ligands generally act as ditopic halide receptors with even the largest, L5, being too small to envelop the anion. The ligand's basicity behaviour parallels that observed for related para-analogues. Despite the ready crystallisation of fluoride, HF2-, chloride, bromide, iodide and triiodide salts in the solid state, there appears to be little affinity for halides in aqueous solution in the pH range accessible via potentiometry. The results do give a detailed insight into the role of the aryl ring in restricting the conformational flexibility of the ligands and, hence, the ability to chelate perching anions.     

p-tert-Butyl thiacalix[4]arenes functionalized at the lower rim by amide, hydroxyl and ester groups as anion receptors

New p-tert-butyl thiacalix[4]arenes differently substituted at the lower rim with amide, hydroxyl and ester groups were synthesized. Binding properties of the compounds toward some tetrabutylammonium salts n-Bu(4)NX (X = F(-), Cl(-), Br(-), I(-), CH(3)CO(2)(-), H(2)PO(4)(-), NO(3)(-)) were studied by UV spectroscopy. It was found that the stoichiometry of the complexes, generally, is 1 : 1, and the association constants are in the range of 10(3)-10(5) M(-1). The p-tert-butyl thiacalix[4]arenes containing secondary amide groups trisubstituted at the lower rim bind the studied anions most effectively. Selective receptors for fluoride and dihydrogen phosphate salts of tetrabutylammonium were found.     

Pyridyl thioureas as switchable anion receptors

The binding selectivity of simple pyridyl thioureas in acetonitrile can be completely switched by protonation; hence the neutral thiourea binds acetate, but not chloride or bromide, whereas the protonated thiourea binds strongly to chloride or bromide, but is deprotonated by acetate.     

硫脲类阴离子受体的设计合成与阴离子识别

硫脲类化合物具有生物活性,是优良的氢键供体,与阴离子特别是含氧阴离子形成氢键配合物。本文设计合成了系列二苯基硫脲衍生物,通过取代基效应调控硫脲衍生物分子内电转移过程,阴离子与硫脲基团结合后,增强了分子内供体的给电子能力,进一步促进电荷转移过程,据此识别不同的阴离子。由于主体分子与阴离子间形成氢键的能力及阴离子碱性的差异,可达到选择性结合的目的。     

Carbamate triserine lactone receptors for anion recognition

We have taken advantage of the ability of the cyclic triester of l-serine to organize ligand units appended to the three α-amine functionalities, as in enterobactin, a siderophore produced by enteric bacteria that binds ferric ion exceptionally well (K_f = 10⁴⁹). As an extension of the preorganization concept, this work describes the preparation and characterization of carbamate triserine lactone receptors 1-6 and their ability to act as molecular receptors for anions. These receptors bind halides (F⁻ ? Cl⁻ > Br⁻ > I⁻) with binding constants K in the range 21-7350 L mol⁻¹.